Multiple Stored Procedures,single Report
Sep 3, 2007
Hi ,
I have a Report which has 8 stored procedures to get 8 resultant data sets . the stored procedures are almost similar such that they have only difference is the where clause and column getting returned.
So ,every stored access same set of tables and temporary tables getting created to store some set of active data derived from big table.
what happening is ,when i run the stored procedures individually in query analyser ,it is taking the time which is accepatable individually,but when i keep them in the same report. it is taking the time which is equal to sum of all the times taken by the stored procedures ran individually in query analyser which is some what not acceptable
can anybody through an idea,what can be done here. i already thought of locks and kept set transaction isolation level read uncomitted for all the stored procedures.but the time taking is same.
please help me here,i am stuck
Thank you
View 1 Replies
ADVERTISEMENT
Jun 20, 2007
Hello.
I have my database and i generated the script that creates the entire database. My database has some stored procedures.
When i create the script without the stored procedures, everything works fine when i try to reinstall the database. But if i create the script with the stored procedures, i get the following error message when i try to reinstall the database:
Code:
System.Data.SqlClient.SqlException: 'CREATE/ALTER PROCEDURE' must be the first statement in a query batch.
Incorrect syntax near the keyword 'PROCEDURE'.
Must declare the scalar variable "@time1".
as i understand, i must have 1 storedprocedure per script. I tried separating one stored procedure per script and everything works fine, the problem here is that i have many many stored procedures.
Now, is there a way to have multiple stored procedures in one single sqlscript?
Do i really need to separate my stored procedures in one script per stored procedure or is there any way to put them all in one single script?
THANKS FOR YOUR HELP!!
View 1 Replies
View Related
Aug 11, 2005
Hi all,
I want to use 2 stored procedures in one report, but I could not find what is the way of doing this. I searched this subject on the intrernet, and I found some solutions. However, they used stored procedures in one stored procedure and used in one report. This is not the thing which I want to do, I want only do using 2 stored procedures in one report at the same time.
Thanks, for now...
View 1 Replies
View Related
May 31, 2007
The version of Report Builder I have will only let me choose from a very limited range of layouts. For example, the tabular layout displays a single table on a page.
Is there a way to produce a report containing two tables and other fields?
For example, I would like to create a very simple customer report with customer name and address at the top, then a table containing all contacts I have for the the customer (a 1:N sub-table of customer) and then a second table containing all the orders from the customer (a 1:N sub-table of customer).
Is this possible in the current version of Report Builder or is it planned in a future relase?
P.S. I know this is easy in VS Report Designer but I specifically want to do this in Report Builder. The Report Designer client is simply too complex for my non-technical user base. Report Builder would be ideal.
View 3 Replies
View Related
Feb 5, 2008
i have sql server 2005 and sqlserver management studio;I want to get all stored procedures in my db as a filewhat can I do to get all stored procedures together as a single file
View 3 Replies
View Related
Sep 11, 2014
how to count from multiple tables. So currently I pull two separate reports to show the count of TaskIDs by customer state and another to show WrapID by Customer state for last month:
TaskID Count by Customer state Query:
---------------------------------------
SELECT CU.CustomerState as 'State'
,Count (CM.TaskID) as 'CaseCount'
From Customer CU
LEFT OUTER JOIN ACN_CCPCaseManagementTask CM ON CU.CustID=CM.CustID
[code]...
I am wanting to add both these counts into a single report so i tried the follow query but the counts don't match to the reports I pull separately.
SELECT CU.CustomerState as 'State'
,Count (CM.TaskID) as 'CaseCount'
,Count (CW.WrapCodeID) as 'WrapCount'
From Customer CU
LEFT OUTER JOIN ACN_CCPCaseManagementTask CM ON CU.CustID=CM.CustID
LEFT OUTER JOIN acn_ccpwrapcode
[code]....
View 2 Replies
View Related
Jan 25, 2008
In my form i have a list box and i need to display paticular records of all employees I selected.So please tell me how to pass multiple values from a single parameter.
currently i am able to pass single value through a parameter using following code
osqlreport.reportViewer1.ServerReport.ReportServerUrl = new Uri("http://localhost/reportserver");
osqlreport.reportViewer1.ServerReport.ReportPath = "/employee/5_0emplyeedata";
List<Microsoft.Reporting.WinForms.ReportParameter> paramList = new List<Microsoft.Reporting.WinForms.ReportParameter>();
string stritem;
stritem = Convert.ToString(this.lstSelectedData.Items[0]);
paramList.Add(new Microsoft.Reporting.WinForms.ReportParameter("paraempno", stritem, false));
osqlreport.reportViewer1.ServerReport.SetParameters(paramList);
osqlreport.reportViewer1.RefreshReport();
osqlreport.Show();
what changes do i need to do to make it work.(lstSelectedData is my list box)
View 3 Replies
View Related
May 7, 2008
I am using SQL RS 2005. I have a report that is using multiple data sources from different offices. I can add these data sources in my report but is it possible that I can select a specific data source based on a selected parameter value. In this case user from each office, select their office location and be able to see the data from their office. I would appreciate any suggestions.
Sal
View 5 Replies
View Related
Jul 20, 2007
Hi,
I have an application wherein I need to generate a single report(possibly in PDF format) which contains more than one report. Iam using SSRS 2005. In my application Iam using report server url to render reports. The below is URL for rendering single report.
http://servername/ReportServer/Pages/ReportViewer.aspx?reportname&rs%3aCommand=Render&rs%3aFormat=HTML4.0&rc%3aToolbar=true
Is it possible to render multiple reports into a single report ?
Can anyone help me in this regard ?
Thanks,
S V Ramakrishna
View 2 Replies
View Related
Jun 22, 2007
I have multiple data sources that I would like to use for a single report. The data sources are separate due to security requirements. I have a table that I can get the Initial Catalog from. How do I get that field from the database into the data source connection string at run time?
I saw this link here but the light bulb didn't go off:
http://technet.microsoft.com/en-us/library/ms156450.aspx
"define a query that retrieves a list of data sources at run time"
Can somebody help me out here?
TIA,
Darren
View 13 Replies
View Related
Oct 2, 2006
The goal is to produce a single PDF consisting of a number of subreports. Some are landscape, others are portrait. The subreports may also be run as independent reports. The master report that contains them defaults to the width of the widest subreport, which is landscape. This causes all portrait subreports to spill over producing blank pages. Are there any work-arounds to concatenate multiple, single report PDFs into a single PDF and have page numbering too?
Thanks!
View 11 Replies
View Related
Mar 14, 2006
I am using SS 2005 RS. I am able to generate single page pdf reports by passing "id" as a parameter. Now I need to send multiple ids as parameter and generate one big report which would contain reports for all the ids supplied on separate pages. Is this possible? If yes, then how do i do this.
What I have tried so far is, I created new report with a list control and added single page report as a subreport to this list control and grouped this list control using id parameter. When i send multiple ids in the parameter, for example 3 ids, it generates 3 page report but only for the first id. So it generates report for the first id and repeats same report 3 times.
Thanks for your help,
View 9 Replies
View Related
Mar 30, 2007
I would like to know if it is possible to have different applications on separate report servers sharing one report server database. If so are there possible issues or ptfalls to this type of architecture?
Thanks,
thecoleman
View 3 Replies
View Related
Jan 24, 2008
Does anyone know if it is possible to have text in a single table cell where the first field is formatted in italics and the second is in normal?
eg: = Fields!firstname.Value(as italic) & " " & Fields!lastname.Value(as normal)?
shidot
View 5 Replies
View Related
May 19, 2008
Hi,
I have used several sql queris to generate a report. This queries pull out data from different tables. But sometimes at the same table too.
Basically those are SELECT statements.
I have created stored proc for each SELECT statement. now I'm wondering can I include all SELECT statements in one stored proc and run the report.
If possible, can anyone show me the format?
Thanks
View 4 Replies
View Related
Dec 7, 2007
I have a simple question: Can I have two or more stored procedures that begin transactions but the last stored procedure will commit all transactions if there was no error?
In other words, I have a stored procedure that performs some legacy stuff. I do not want to rewrite that logice, execpt I am putting it into a Stored Procedure since it currently is embedded SQL.
To support newer functionality, I am writing data to additional new tables. However, I do not want the *new* things to occur if there is an error. This is easy enough, I dont call the Stored Procedure for the new functionality if there was an error. However, if there was not an error and the newer stored procedure is called AND there is an error in the new stored procedure, I want to ROLLBACK the changes from the proceeding stored procedures.
To my understanding, I can name transactions but that is only to indicate in the logs what transactions have failed.
I thought about not using transactions for any of the individual stored procedures and calling them from a main stored procedure. The main stored procedure will have a BEGIN TRY and an END TRY (I am using SQL Server 2005) and at the top (right after the try) I will have a BEGIN TRANSACTION. In the BEGIN CATCH I will have a ROLLBACK and at the end I will have a COMMIT. If any of the stored procedures fail at any point it will cause the catch to occur thus rolling back all of my transactions. This would be the easiest way but I still need to deal with the question of, "What happens if any single stored procedure is called?" I guess I could have try and catches in each individual stored procedure for that.
I just want to make sure I am not overlooking something simple. I think I have the right idea by doing it this way I mentioned above. Because this is critical billing processing I just want to have some reassurance that this would work.
Thank
View 4 Replies
View Related
Apr 13, 2008
My stored procedure looks like this:
ALTER PROCEDURE dbo.Calculate
AS
BEGIN
SET NOCOUNT ON
declare @lastUpdate varchar(15)
declare @sql nvarchar(4000)
declare LastUpdate cursor for select updateID from currentUpdate
OPEN lastUpdate
FETCH NEXT FROM LastUpdate INTO @lastUpdate
SELECT @sql = 'INSERT INTO A ...WHERE ..' + @lastUpdate
EXEC(@sql)
SELECT @sql = 'INSERT INTO B ...WHERE...' + @lastUpdate
EXEC(@sql)
SELECT @sql = 'UPDATE ...WHERE...' + @lastUpdate
EXEC(@sql)
CLOSE LastUpdate
DEALLOCATE LastUpdate
END
When I run this stored procedure from my web page, only the first sql is executed and then I get a timeout message.
When I execute the stored procedure manually on the server, all the sqls are executed correctly.
How can I solve this problem?
Thank You.
View 1 Replies
View Related
Jan 5, 2004
Am i the only one who is forced to open multiple instances of SQL Server Enterprise Manager in order to edit more than one stored procedure at a time? A lot of times i'll be comparing two sprocs or writing one based off of a "template" i wrote earlier. But i have to open two instances and alt-tab between them. Is there an easier way? (aside from pasting it into a notepad and using that)
View 5 Replies
View Related
Mar 2, 2006
Hi,
I am hoping someone can help me with creation of a stored procedure. What i would basically like to do is have a SELECT stored Procedure that gets values from one table and then uses these values to retrieve data from another table.
i.e. I would like to retrieve 2 dates from another table (the table has a single record that holds the 2 dates) then I would like to use those two dates to retrieve all records of another table that fall between those 2 dates.
As I know nothing about stored procedures I'm not even sure how to go about this??
Regards.
Peter.
View 2 Replies
View Related
May 1, 2008
Hey
I am creating a database application that is accessed through a .NET front end.
What I want to do is run a SQL script that will create my DB, create my indexes and enforce my constraints (all of which I have done) but I also want to create my stored procedures in the same script also.
When I merge all my stored procedures (about 16) into one file and run it in SQL Query Analyzer I get multiple errors but the one that is coursing me the most bother is
‘Server: Msg 156, Level 15, State 1, Procedure procedureName, Line 134
Incorrect syntax near the keyword 'procedure'.’
What does this mean and why can’t I run more than once Stored Procedure at once?
Many thanks
Quish
View 2 Replies
View Related
Apr 27, 2007
I have two questions:
1) Is it possible to rename a SQL table –or- copy the content of a table into a new table ?
2) How to replace the renamed or replaced table name inside the code of ALL Stored Procedures that references it ?
View 3 Replies
View Related
Sep 3, 2007
Hi,
I am using multiple stored procedures which are using same set of tables at a time .
As stored procedures dont have any DMLs. they are just select statement copied into a temporary table for further processing.
My issue is ,I dont want to wait one stored procedure until the other stored procedure is completed.
as one stored procedure is taking 43 secs and another sp is taking one min .they are conmbinely taking 1:43 mins
where i want to take just 1 min which is the time took by second sp
I want this because i am calling all the stored procedures more than 5 in my reporting services to show in one report which is taking huge time
Please suggest me how to proceed here.i am stuck
what should i do with the tables or stored procedures?
Thank you
Raj Deep.A
View 4 Replies
View Related
Feb 25, 2008
I have 50-60 stored procedures in my application and these are stored in different files as per file one stored procedudre.
I want to deploy my applicaiton. I want to create a batch or Single SQL file to create all stored precodures in on go.
My objective is to ensure that No stored procedure has left while deploying the applicaiton.
thanks.
View 3 Replies
View Related
Sep 3, 2007
Hi ,
I have a Report which has 8 stored procedures to get 8 resultant data sets . the stored procedures are almost similar such that they have only difference is the where clause and column getting returned.
So ,every stored access same set of tables and temporary tables getting created to store some set of active data derived from big table.
what happening is ,when i run the stored procedures individually in query analyser ,it is taking the time which is accepatable individually,but when i keep them in the same report. it is taking the time which is equal to sum of all the times taken by the stored procedures ran individually in query analyser which is some what not acceptable
can anybody through an idea,what can be done here. i already thought of locks and kept set transaction isolation level read uncomitted for all the stored procedures.but the time taking is same.
please help me here,i am stuck
Thank you
View 2 Replies
View Related
May 1, 2008
Hey
I am creating a database application that is accessed through a .NET front end.
What I want to do is run a SQL script that will create my DB, create my indexes and enforce my constraints (all of which I have done) but I also want to create my stored procedures in the same script also.
When I merge all my stored procedures (about 16) into one file and run it in SQL Query Analyser I get multiple errors but the one that is coursing me the most bother is
€˜Server: Msg 156, Level 15, State 1, Procedure procedureName, Line 134
Incorrect syntax near the keyword 'procedure'.€™
What does this mean and why can€™t I run more than once Stored Procedure at once?
Many thanks
Quish
View 9 Replies
View Related
Sep 8, 2015
So I get the basics, have a script that can deploy a single report to a single server. I have other simple scripts that work as well. Now I want a script that can deploy a single report to multiple Sharepoint servers. I have about 30. I know we are probably doing this wrong, as in, we shouldn't be deploying the same report to 30 sites, as they are all all technically all on the same server however they are all independent site collections so as far as I know there is no way to deploy them to a central location and then link to them from each site.
So I tried to copy elements of my single report deploy script and duplicate the Sub Main() to Sub Main1() and Sub Main2() with multiple "ParentPath1" dims, yes I know I'm stupid. That obviously didn't work. So looking at some other scripts including my own subscription updater and I'm sure I need to do some kind of "For Each item in X" but where to start. The other lists I've seen all come from rs.Something. My list is just 30 variables in the script, how can I say for each site in this list, Publish this report?
Here's the simple script that works fine. I just don't know how to modify it to make it deploy this to multiple sites. After I figure that out, I was going to accept the challenge of deploying multiple reports to multiple sites in a single script...
Dim warnings As Warning() = Nothing
Dim parentFolder As String = "Reports"
Dim filePath As String = "filepath"
Dim reportName As String = "Report file name"
Dim parentPath As String = "Sharepoint site URL"
Public Sub Main()
[Code] ....
View 2 Replies
View Related
Feb 21, 2008
Hello,
I was wondering if anyone can explain the positives and negatives of using a single stored procedure that contains one or more distinct queries. I know there are problems with dynamic SQL but I am not proficient enough to know whether this falls under that umbrella.
For clarification, what I am referring to is this: In a single stored procedure, I have a parameter called Query_ID that is used to identify which query in the sproc that I want to execute. Then from my ASP page, I simply pass the appropriate value for Query_ID. So:
IF @QUERY_ID = 1
BEGIN
SELECT [whatever]
FROM [tbl1]
WHERE [conditions]
GROUP BY [something]
ORDER BY [somethingelse]
END
ELSE
IF @QUERY_ID = 2
BEGIN
SELECT [whatever]
FROM [tbl2]
WHERE [conditions]
GROUP BY [something]
ORDER BY [somethingelse]
END
END
I hope that makes sense. Thanks in advance.
View 7 Replies
View Related
May 12, 2008
Hello All,I can not figure out how to accomplish the task that I want. So, please help.I have two tables, Parent and Child tables. For both Tables I have stored procedures for inserting records. I simply pass parameters for field values to stored proecdures and Stored procedures simply insert record with those values. I am first inserting record in Parent table and then in child table via calling their stored procedures one by one.Now, what I want to do is, after inserting record in parent table successfully, If record can not be inserted in child table successfully then I want to rollback, I also want to undo the insertion operation done in previous parent table's stored procedure call. The problem is, I can not span a Transaction across multiple stored procedure. If I begin a Transaction in a stored procedure for a Parent table, then I have to either roll back or commit that transaction in the same stored procedure. How can I span a transaction across multiple stored procedures, so that I can rollback in the Child Table's stored procedure in such a way that the Record Insertion of the Parent table can be cancelled. What to do...? Please help, it's urgent. Thanks to all.
View 4 Replies
View Related
Aug 31, 2007
Hi all,
Does anyone know how to do the search and replace in multiple stored procedures using SQL 2005 Management Studio?
Any help will be appreciated.
Thanks!
View 3 Replies
View Related
Jun 22, 2007
How to return multiple values from stored procedures to reports in sql server 2005
View 5 Replies
View Related
Jan 3, 2008
I'm running this legacy DTS package under SQL Server 2005, and need to make some changes.
I have some (say, 3) stored procedures, and they all have one same parameter. Each SP returns a dataset. I need to import each dataset to a table using DTS. Both the SPs and the destination tables are in the same database.
So, I created an "Execute SQL Task" and typed in "SQL Statement" something like this:
INSERT INTO TABLE TABLE1
EXEC SP1 ?
GO
INSERT INTO TABLE TABLE2
EXEC SP2 ?
GO
INSERT INTO TABLE TABLE3
EXEC SP3 ?
GO
And the execution returns an error: No value given for one or more required parameters.
Is it possible to assign a parameter to all three SPs? What is the work out if I don't want to change the SPs, and I don't want to create 3 Execute SQL Tasks?
View 4 Replies
View Related
Oct 22, 2007
Hi i have always used views in my code to group common functionality in my sql expressions and then i can simply call these views in my data access layer by saing:
SqlCommand cmd = new SqlCommand("SELECT * FROM vw_Documents WHERE CategoryID = @CategoryID", cn);
However my view has become so complicated that i had to convert it to a stored procedure called sp_Documents. The problem now though is that is that i wish to do queries against the data returned but i can't simply say:
SqlCommand cmd = new SqlCommand("SELECT * FROM sp_Documents WHERE CategoryID = @CategoryID", cn);
The only way i can see to do it is to create a stored procedure for every single senario i have passing in the appropriate values as parameters. This seems a pretty messy solution to me because i would have repeated logic in all my stored procedures. Therefore i was wondering if there's a simpler way for me to do this or am i just being lazy :).
Appreciate if someone could help,
View 2 Replies
View Related
