I have a table A that has related records in table B. I need to run an update to concatonate certian values in table B into a single value in table A.
Since an UPDATE can't update the same row twice, is there any way I can do this other than use a Cursor?
Hi...
I have data that i am getting through a dbf file. and i am dumping that data to a sql server... and then taking the data from the sql server after scrubing it i put it into the production database.. right my stored procedure handles a single plan only... but now there may be two or more plans together in the same sql server database which i need to scrub and then update that particular plan already exists or inserts if they dont...
this is my sproc...
ALTER PROCEDURE [dbo].[usp_Import_Plan]
@ClientId int,
@UserId int = NULL,
@HistoryId int,
@ShowStatus bit = 0-- Indicates whether status messages should be returned during the import.
AS
SET NOCOUNT ON
DECLARE
@Count int,
@Sproc varchar(50),
@Status varchar(200),
@TotalCount int
SET @Sproc = OBJECT_NAME(@@ProcId)
SET @Status = 'Updating plan information in Plan table.'
UPDATE
Statements..Plan
SET
PlanName = PlanName1,
Description = PlanName2
FROM
Statements..Plan cp
JOIN (
SELECT DISTINCT
PlanId,
PlanName1,
PlanName2
FROM
Census
) c
ON cp.CPlanId = c.PlanId
WHERE
cp.ClientId = @ClientId
AND
(
IsNull(cp.PlanName,'') <> IsNull(c.PlanName1,'')
OR
IsNull(cp.Description,'') <> IsNull(c.PlanName2,'')
)
SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Updated ' + Cast(@Count AS varchar(10)) + ' record(s) in ClientPlan.'
END
ELSE
BEGIN
SET @Status = 'No records were updated in Plan.'
END
SET @Status = 'Adding plan information to Plan table.'
INSERT INTO Statements..Plan (
ClientId,
ClientPlanId,
UserId,
PlanName,
Description
)
SELECT DISTINCT
@ClientId,
CPlanId,
@UserId,
PlanName1,
PlanName2
FROM
Census
WHERE
PlanId NOT IN (
SELECT DISTINCT
CPlanId
FROM
Statements..Plan
WHERE
ClientId = @ClientId
AND
ClientPlanId IS NOT NULL
)
SET @Count = @@ROWCOUNT
IF @Count > 0
BEGIN
SET @Status = 'Added ' + Cast(@Count AS varchar(10)) + ' record(s) to Plan.'
END
ELSE
BEGIN
SET @Status = 'No information was added Plan.'
END
SET NOCOUNT OFF
So how do i do multiple inserts and updates using this stored procedure...
Regards
Karen
How to import multiple text files (residing in single folder) into SQL Server table? I know how to import single file but not sure how multiple files could be loaded? Pls. guide.
Thanks,
HShah
I am using DTS and VBScript in DataPump tasks in order to transfer large amounts of data from text files to an SQL database.
As the database uses a normalized schema, there is often the case of inserting multiple records in a destination table from various fields of the same record of the source text file.
For example, if the source record contains information about goods sold like date, customer, item code, item name and total amount, and does so for a maximum of 3 goods per sale (row), therefore has the structure:
[date], [custid], [code1], [name1], [amount1], [code2], [name2], [amount2], [code3], [name3], [amount3]
trying to transfer that record to a [SALES] target table (in a normalized database), we would have to split each source record as follows:
[date], [custid], [code1], [name1], [amount1]
[date], [custid], [code2], [name2], [amount2]
[date], [custid], [code3], [name3], [amount3]
What is the best way to do this using DTS?
I have tried using a datapump task and VBScript, and I guess it has to do with the DTSTransformStat_**** constants, but none of those I used seems to work
Vasilis Siatravanis,
siatravanisv@interamerican.gr , vasilliss@hotmail.com
Once I add new data I can only get search results to return if I rebuild my fulltext catalog, how do I stop this?thanks-c
View 2 Replies View RelatedHello,
I am working on a web app and am at a point where I have multiple rows in my GUI that need to be sent to and saved in SQL Server when the user presses Save. We want to pass the rows to a working table and the do a begin tran, move rows from working table to permanent tables with set processing, commit tran. The debate we are having is how to get the data to the work table. We can do individual inserts to the work table 1 round trip for each row (could be 100's of rows) or concatenate all rows into 1 long (up to 8K at a time) string and make one call sending the long string and then parse it into the work table in SQL Server. Trying to consider network usage and overhead by sending many short items vs 1 long item and cpu overhead for many inserts vs string manipulation and parsing. Suggestions?
Thanks you
Jeff
Is it possible to do an update on multiple records. I have fields CusOrderID and CusCreditAmt in table CusOrder; and fields CusOrderID and CreditAmt in table CusCredits. I would like to update the value in the CusCreditAmt field in CusOrder to equal the CreditAmt field in CusCredits where CusOrderID is the same in both tables.
I tried doing this in a stored procedure based on a View with an inner join between the 2 tables as follows:
Update View1
Set CusCreditAmt = CreditAmt
I received an error that the subquery returned more than one value. Is there anyway to do something like this and make it work?
Many thanks for any advice.
Writing this code using a CTE or any other method which do not use a table variable or a temp table as the users do not permissions to run this code from the application because of their roles which are required for creating and dropping the temp tables. I replaced table variable in place of Temp tables however the query never completes, probably because of the number of rows.
SELECT A.[Entry No_], A.[G_L Account No_],A.[Gen_ Prod_ Posting Group],A.[Document No_],A.[Posting Date]
INTO temp1
FROM [G_L Entry] as A ,[G_L Account] as B
where A.[G_L Account No_]= B.[No_]
SELECT VE.[Entry No_],VE.[Document No_],VE.[Posting Date],VE.[Gen_ Prod_ Posting Group] , GLILER.[G_L Entry No_]
INTO temp2
[code]....
I have a report I am creating in sql reporting services 2005 and what I am trying to do is have a single text box with multiple lines of data format each item in the textbox to specific parameters but I have not been able to figure it out. I tried to format my data on the sql side so that it cam out as follows:
tried
Monday, Nov. 26, 2007
"Color = Blue FontWeight = Bold " & John Doe & CHAR(9) & "Color = Red FontWeight = Normal " & Jane Smith & CHAR(9) & "Color = Black FontWeight = Bold" John Roberts
This did not work
so then I tried
Monday, Nov. 26, 2007
"FontColor = Blue FontWeight = Bold " & John Doe & CHAR(9) & "FontColor = Red FontWeight = Normal " & Jane Smith & CHAR(9) & "FontColor = Black FontWeight = Bold" John Roberts
Still did not work
What my end result needs to be in a single text box...
Monday, Nov. 26, 2007
John Doe Jane Smith John Roberts
If anyone has the answer thanks ahead of time.
Mike
I am a total newbie to SQL Server, but have a good idea about how things operate..
I have a "job" that runs multiple (10) update queries for me in different tables.
Can I create a stored procedure to do these so that I can make one call to them?
If not, how can I call the job to start external to MS SQL?
Is there a way to update all of the records in a table all at once using the results of a select of a different table's data?
For example.
There are two tables, each have a primary index of catnum. One table (invoice_items) contains the line items (catnum) of customer invoices. The other table (sales_history) is a sales history table. I want to select all data from the invoice_items and sum the sales for various time periods (sales_0to30days, sales_31to60days, etc.) I then want to update the sales_history table which has columns: catnum, sales_0to30, sales_31to60, etc.). I want to run this daily to update all records.
Any help would be appreciated. Many thanks.
Using SQL2000, is there another way of optimizing the original query below.TIA,BobUpdate Transactionset field1 = (select (sum(tax)-sum(credit))/sum(credit) from tblOrder wheretblOrder.id = Transaction.id),field2 = (select avg(price) from tblOrder where tblOrder.id =Transaction.id),field3 = (select min(cost) from tblOrder where tblOrder.id = Transaction.id)etc..(there are six additional updates)Is this a quicker way:Update TransactionSET field1 = (sum(tax)-sum(credit))/sum(credit) , field2 = avg(price) ,field3 = min(cost) , etc.....FROM tblOrderWHERE tblOrder.id = Transaction.id
View 1 Replies View RelatedHowdy,I need to write an update query with multiple aggregate functions.Here is an example:UPDATE tSETt.a = ( select avg(f.q) from dbo.foo f where f.p = t.y ),t.b = ( select sum(f.q) from dbo.foo f where f.p = t.y )FROM dbo.test tBasically I need to get some aggregate statistics about the rows offoo and store them in rows of t. The above statement works fine...butnote how the two subSelect's have the exact same WHERE clause. Thisscreams at me to combine them...but how? I would like to havesomething like this in my query:SELECT avg(f.q), sum(f.q) FROM dbo.foo f WHERE f.p = 2...and somehow store the results in t.a and t.b. Is there any way todo this?Thanks before hand!
View 6 Replies View RelatedI have a table used by multiple applications. One column is an Identify field and is also used as a Primary key. What isare the best practices to use get the identity value returned after an INSERT made by my code.. I'm worried that if someone does an INSERT into the same table a "zillionth" of a second later than I did, that I could get their Identity value.
TIA,
Barkingdog
Please can anyone help me for the following?
I want to merge multiple rows (eg. 3rows) into a single row with multip columns.
for eg:
data
Date Shift Reading
01-MAR-08 1 879.880
01-MAR-08 2 854.858
01-MAR-08 3 833.836
02-MAR-08 1 809.810
02-MAR-08 2 785.784
02-MAR-08 3 761.760
i want output for the above as:
Date Shift1 Shift2 Shift3
01-MAR-08 879.880 854.858 833.836
02-MAR-08 809.810 785.784 761.760
Please help me.
I have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
Hi,
I have multiple columns in a Single Table and i want to search values in different columns. My table structure is
col1 (identity PK)
col2 (varchar(max))
col3 (varchar(max))
I have created a single FULLTEXT on col2 & col3.
suppose i want to search col2='engine' and col3='toyota' i write query as
SELECT
TBL.col2,TBL.col3
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col2,'engine') TBL1
ON
TBL.col1=TBL1.[key]
INNER JOIN
CONTAINSTABLE(TBL,col3,'toyota') TBL2
ON
TBL.col1=TBL2.[key]
Every thing works well if database is small. But now i have 20 million records in my database. Taking an exmaple there are 5million record with col2='engine' and only 1 record with col3='toyota', it take substantial time to find 1 record.
I was thinking this i can address this issue if i merge both columns in a Single column, but i cannot figure out what format i save it in single column that i can use query to extract correct information.
for e.g.;
i was thinking to concatinate both fields like
col4= ABengineBA + ABBToyotaBBA
and in search i use
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABBToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result = 1 row
But it don't work in following scenario
col4= ABengineBA + ABBCorola ToyotaBBA
SELECT
TBL.col4
FROM
TBL
INNER JOIN
CONTAINSTABLE(TBL,col4,' "ABengineBA" AND "ABB*ToyotaBBA"') TBL1
ON
TBL.col1=TBL1.[key]
Result=0 Row
Any idea how i can write second query to get result?
I have triggers in place on a table that do various checks on data input. It is clear that because of these triggers I cannot do updates on multiple records in this table. When I do, I receive an error that "subquery returned more than one value." Is there anyway to work around this by temporarily turning off triggers or something else?
Many thanks for advice.
Hey, I have couple of triggers to one of the tables. It is failing if I update multiple records at the same time from the stored procedure.
UPDATE
table1
SET
col1 = 0
WHERE col2 between 10 and 20
Error I am getting is :
Server: Msg 512, Level 16, State 1, Procedure t_thickupdate, Line 12
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
The statement has been terminated.
What is the best possible way to make it work? Thank you.
I was able to catch one update but not multiple updates or batch updates done to the table. I know the updated records are residing in inserted and deleted tables. Without using cursors, how can i read and compare all the rows in these two tables?
Following is the table structure:
Customer_Master(custmastercode, customer_company_name,updated_by)
Following is the trigger:
ALTER TRIGGER [TR_UPDATE_CUST]
ON [dbo].[CUSTOMER_MASTER]
AFTER UPDATE
AS
BEGIN
SET NOCOUNT ON;
IF EXISTS (SELECT * FROM inserted)
BEGIN
declare @custcode int
Declare @message varchar(5000)
Declare @custommessage varchar(2000)
Declare @CUSTMASTERCODE int
Declare @CUSTOMER_COMPANY_NAME varchar(50)
Set @message = 'Changes in customer account number ' + Cast ((@custcode) as varchar(10)) + ': '
select @custcode = [CUSTMASTERCODE],@UPDATED_BY = [UPDATED_BY] from inserted
Set @message = 'Changes in customer account number ' + Cast ((@custcode) as varchar(10)) + ': '
IF(update([CUSTOMER_COMPANY_NAME]))
Begin
select @UCUSTOMER_COMPANY_NAME = [CUSTOMER_COMPANY_NAME] from deleted
select @CUSTOMER_COMPANY_NAME = [CUSTOMER_COMPANY_NAME] from inserted
Set @custommessage = 'Customer company name changed from ' + @UCUSTOMER_COMPANY_NAME + ' to ' + @CUSTOMER_COMPANY_NAME + '.'
Set @message = @message + @custommessage
End
Set @message = @message + ' Updated by ' + @UPDATED_BY + ' at ' + CAST(getdate() AS VARCHAR(20))+ '.'
INSERT INTO [CHANGE_HISTORY]
([CUSTMASTERCODE]
,[CHANGE_DETAILS])
VALUES (@custcode, @message)
END
END
Here is some data that will explain what I want to do:
Input Data:
Part ColorCode
A100 123
A100 456
A100 789
B100 456
C100 123
C100 456
Output Data:
Part ColorCode
A100 123;456;789
B100 456
C100 123;456
How to insert single row/multiple rows into multiple tables by using single insert statement.
View 1 Replies View RelatedHi, i'm trying to do a full text search on my site to add a weighting score to my results. I have the following database structure:
Documents: - DocumentID (int, PK) - Title (varchar) - Content (text) - CategoryID (int, FK)
Categories: - CategoryID (int, PK) - CategoryName (varchar)
I need to create a full text index which searches the Title, Content and CategoryName fields. I figured since i needed to search the CategoryName field i would create an indexed view. I tried to execute the following query:
CREATE VIEW vw_DocumentsWITH SCHEMABINDING ASSELECT dbo.Documents.DocumentID, dbo.Documents.Title, dbo.Documents.[Content], dbo.Documents.CategoryID, dbo.Categories.CategoryNameFROM dbo.Categories INNER JOIN dbo.Documents ON dbo.Categories.CategoryID = dbo.Documents.CategoryID
GOCREATE UNIQUE CLUSTERED INDEX vw_DocumentsIndexON vw_Documents(DocumentID)
But this gave me the error:
Cannot create index on view 'dbname.dbo.vw_Documents'. It contains text, ntext, image or xml columns.
I tried converting the Content to a varchar(max) within my view but it still didn't like.
Appreciate if someone can tell me how this can be done as surely what i'm trying to do is not ground breaking.
Hello,
I have a stored procedure that creates a temporary table, and then populates it using an INSERT and then a series of UPDATE statements. The procedure then returns the temporary table which will contain data in all of its columns.
When I call this procedure from SSRS 2005, the rowset returned contains data in only those columns that are populated by the INSERT statement. The columns that are set via the UPDATE statements are all empty. I read (in the Hitchhikers Guide to Reporting Services) that SSRS will only process the first rowset in a stored procedure that generates multiple rowsets. Is this true? Is this why SSRS does not retrieve data for the columns that are populated by the UPDATE statements?
Here is the stored procedure:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-- File: sp_GetProgramsWatchedByDateRange.sql
-- Desc: Returns EDP program and related channel (i.e., provider) information from the IPTV Data warehouse.
-- Note that some of that data used by this procedure are obtained from the RMS_EPG database
-- which is created by an application (loadEPG) that loads the EPG data from a GLF format XML file.
-- Auth: H Hunsaker
-- Date: 11/07/2006
-- Example invocation
-- EXEC dbo.sp_GetProgramsWatchedByDateRange ...
-- Arguments/Parameters:
-- Parameter Name Type Description
-- 3. StartDate datetime First date of reporting period
-- 4. EndDate datetime Last date of reporting period
-- TerseMode bit Return all columns? (1 = no, 0 = yes)
-- 5. AsXML bit Resultset format (0 = standard, 1 = XML)
-- 6. Debug bit Debug mode (0 = off, 1 = on). Currently disabled
IF OBJECT_ID (N'dbo.sp_GetProgramsWatchedByDateRange') IS NOT NULL
DROP PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
GO
CREATE PROCEDURE dbo.sp_GetProgramsWatchedByDateRange
@StartDate datetime = NULL,
@EndDate datetime = NULL,
@TerseMode bit = 0,
@AsXML bit = 0,
@Debug bit = 0
AS
-- Notes: Much of the program content (roles, flags, etc.) that we want is not stored in the IPTV data warehouse.
-- So I am going to the RMS_EPG database to obtain that information.
-- We will have to ensure that the 2 databases are generated at the same or a matching time
-- in order to to ensure that all programID values in the data warehouse can be located in the RMS_EPG database.
-- Debug code for testing
-- DECLARE @StartDate datetime
-- DECLARE @EndDate datetime
-- DECLARE @TerseMode bit
--SET @StartDate = NULL
--SET @EndDate = NULL
--SET @TerseMode = 1
SET NOCOUNT ON
CREATE TABLE #programWatched
(
--IPTV device ID
tdeviceId uniqueidentifier NULL,
taccountId uniqueidentifier NULL,
-- Basic program information
tprogram int NULL, -- programID from EPG XML, needed to access program data in the RMS_EPG db.
tprogramId uniqueidentifier NULL, -- programID generated by IPTV
tprogramTitle varchar(150) NULL,
tprogramEpisodeTitle varchar(100) NULL,
tprogramDescription varchar(500) NULL,
toriginDateTime datetime NULL,
tduration bigint NULL,
tprogramType nvarchar(100) NULL,
tchannelCallName nvarchar(20) NULL,
--Rating
programMPAARating varchar(50) NULL,
programVCHIPRating varchar(50) NULL,
programMPAARatingVal smallint NULL,
programVChipRatingVal smallint NULL,
-- Categories
programGenre varchar(50) NULL,
programCategory1 varchar(50) NULL,
programCategory2 varchar(50) NULL,
programCategory3 varchar(50) NULL,
programCategory4 varchar(50) NULL,
-- Roles
programActor1FirstName varchar(50) NULL,
programActor1LastName varchar(50) NULL,
programActor1 varchar(100) NULL,
programActor2FirstName varchar(50) NULL,
programActor2LastName varchar(50) NULL,
programActor2 varchar(100) NULL,
programActor3FirstName varchar(50) NULL,
programActor3LastName varchar(50) NULL,
programActor3 varchar(100) NULL,
programActor4FirstName varchar(50) NULL,
programActor4LastName varchar(50) NULL,
programActor4 varchar(100) NULL,
programActor5FirstName varchar(50) NULL,
programActor5LastName varchar(50) NULL,
programActor5 varchar(100) NULL,
programActor6FirstName varchar(50) NULL,
programActor6LastName varchar(50) NULL,
programActor6 varchar(100) NULL,
programActor7FirstName varchar(50) NULL,
programActor7LastName varchar(50) NULL,
programActor7 varchar(100) NULL,
programActor8FirstName varchar(50) NULL,
programActor8LastName varchar(50) NULL,
programActor8 varchar(100) NULL,
programDirectorFirstName varchar(50) NULL,
programDirectorLastName varchar(50) NULL,
programDirector varchar(100) NULL,
programWriterFirstName varchar(50) NULL,
programWriterLastName varchar(50) NULL,
programWriter varchar(100) NULL,
programProducerFirstName varchar(50) NULL,
programProducerLastName varchar(50) NULL,
programProducer varchar(100) NULL,
-- Flags
ClosedCaption bit NULL,
InStereo bit NULL,
Repeats bit NULL,
New bit NULL,
Live bit NULL,
Taped bit NULL,
Subtitled bit NULL,
SAP bit NULL,
ThreeD bit NULL,
Letterbox bit NULL,
HDTV bit NULL,
Dolby bit NULL,
DVS bit NULL,
FlagOrdinalValue smallint NULL,
-- Channel
tchannelId int NULL,
callLetters varchar(20) NULL,
displayName varchar(50) NULL,
type varchar(50) NULL,
networkAffiliation varchar(50) NULL
)
-- I store the program watching data in a temp table because
-- data from the VIL and the Sandbox that were used to test this procedure were either incomplete or invalid.
-- Use of a temp table with a series of updates allow me more control over the result set.
IF @StartDate IS NOT NULL AND @EndDate IS NOT NULL
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
AND originTime BETWEEN @StartDate AND @EndDate
ELSE
INSERT INTO #programWatched (
tdeviceId,
tprogramId,
--tprogramTitle,
--tprogramEpisodeTitle,
toriginDateTime,
tduration,
--tprogramType,
--tchannelCallName,
ClosedCaption,
InStereo,
Repeats,
New,
Live,
Taped,
Subtitled,
SAP,
ThreeD,
Letterbox,
HDTV,
Dolby,
DVS
)
SELECT pw.DeviceID,
pw.programID,
--epg.program,
--epg.programTitle,
--epg.programEpisodeTitle,
pw.originTime AS 'When Watched',
pw.Duration AS 'Duration Seconds',
--epg.programType,
--epg.channelCallName,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 -- program flag values default to zero, as we do not want NULL values.
FROM DW_EventClientProgramWatched pw
WHERE programID IS NOT NULL AND programID != '00000000-0000-0000-0000-000000000000' -- These values should not occur, but they did in the test system
-- AccountId/SubscriberId
UPDATE #programWatched
SET taccountId = (SELECT accountId
FROM DW_BRDB_bm_device d
WHERE d.deviceId = tdeviceId)
-- program (this is the integer program ID stored in the EPG XML, not to be confused with the IPTV programId)
-- a program can occur on multiple channels, so we filter channels where scheduleTime <= originTime <= scheculeTime + durationSecs
UPDATE #programWatched
SET tchannelCallName = (SELECT TOP 1 channelCallName
FROM DW_EPG EPG
WHERE tprogramId = EPG.programId AND toriginDateTime BETWEEN scheduleTime AND DATEADD(s, epg.durationSecs, epg.scheduleTime))
UPDATE #programWatched
SET tprogram = (SELECT TOP 1 program FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramTitle = (SELECT TOP 1 programTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramEpisodeTitle = (SELECT TOP 1 programEpisodeTitle FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName),
tprogramType = (SELECT TOP 1 programType FROM DW_EPG EPG WHERE tprogramId = EPG.programId AND tchannelCallName = channelCallName)
-- Rating (otained from programValues, can also be obtained from programFlags)
UPDATE #programWatched
SET programMPAARating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 9)
UPDATE #programWatched
SET programMPAARatingVal = CASE programMPAARating
WHEN 'G' THEN 10
WHEN 'PG' THEN 25
WHEN 'PG-13' THEN 30
WHEN 'R' THEN 35
WHEN 'NC-17' THEN 50
WHEN 'NRAO' THEN 60
WHEN 'NR' THEN 0
ELSE 0
END
UPDATE #programWatched
SET programVChipRating = (SELECT TOP 1 programValue
FROM RMS_EPG..programValue pv
WHERE tprogram = pv.programID AND pv.programValueTypeId = 8)
UPDATE #programWatched
SET programVChipRatingVal = CASE programVChipRating
WHEN 'TV-Y' THEN 10
WHEN 'TV-Y7' THEN 20
WHEN 'TV-G' THEN 35
WHEN 'TV-PG' THEN 40
WHEN 'TV-14' THEN 45
WHEN 'TV-MA' THEN 60
ELSE 0
END
-- Genre
UPDATE #programWatched
SET programGenre = (SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType psct ON psct.programSubCategoryTypeId = pc.programCategoryId
INNER JOIN RMS_EPG..programCategoryType pct ON pct.programCategoryTypeId = psct.programCategoryTypeId
WHERE tprogram = pc.programID)
-- Categories
UPDATE #programWatched
SET programCategory1 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID)
UPDATE #programWatched
SET programCategory2 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1))
UPDATE #programWatched
SET programCategory3 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2))
UPDATE #programWatched
SET programCategory4 = (SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory pc
INNER JOIN RMS_EPG..programSubCategoryType pct ON pct.programSubCategoryTypeId = pc.programCategoryId
WHERE tprogram = pc.programID AND programSubCategoryTypeValue NOT IN (programCategory1, programCategory2, programCategory3))
-- Roles
UPDATE #programWatched
SET programDirectorFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirectorLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 2)
UPDATE #programWatched
SET programDirector = programDirectorLastName + ' , ' + programDirectorFirstName
UPDATE #programWatched
SET programWriterFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriterLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 7)
UPDATE #programWatched
SET programWriter = programWriterLastName + ' , ' + programWriterFirstName
UPDATE #programWatched
SET programProducerFirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducerLastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 6)
UPDATE #programWatched
SET programProducer = programProducerLastName + ' , ' + programProducerFirstName
UPDATE #programWatched
SET programActor1FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1)
UPDATE #programWatched
SET programActor1 = programActor1LastName + ' , ' + programActor1FirstName
UPDATE #programWatched
SET programActor2FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName))
UPDATE #programWatched
SET programActor2 = programActor2LastName + ' , ' + programActor2FirstName
UPDATE #programWatched
SET programActor3FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleLastName NOT IN (programActor1LastName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleLastName NOT IN (programActor2LastName) AND programRoleLastName NOT IN (programActor2LastName))
UPDATE #programWatched
SET programActor3 = programActor3LastName + ' , ' + programActor3FirstName
UPDATE #programWatched
SET programActor4FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName))
UPDATE #programWatched
SET programActor4 = programActor4LastName + ' , ' + programActor4FirstName
UPDATE #programWatched
SET programActor5FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName))
UPDATE #programWatched
SET programActor5 = programActor5LastName + ' , ' + programActor5FirstName
UPDATE #programWatched
SET programActor6FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName))
UPDATE #programWatched
SET programActor6 = programActor6LastName + ' , ' + programActor6FirstName
UPDATE #programWatched
SET programActor7FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName))
UPDATE #programWatched
SET programActor7 = programActor7LastName + ' , ' + programActor7FirstName
UPDATE #programWatched
SET programActor8FirstName = (SELECT TOP 1 programRoleFirstName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8LastName = (SELECT TOP 1 programRoleLastName
FROM RMS_EPG..programRoleName prn
INNER JOIN RMS_EPG..programRole pr ON pr.programRoleNameId = prn.programRoleNameId
WHERE tprogram = pr.programID AND pr.programRoleTypeId = 1
AND programRoleFirstName NOT IN (programActor1FirstName) AND programRoleLastName NOT IN (programActor1LastName)
AND programRoleFirstName NOT IN (programActor2FirstName) AND programRoleLastName NOT IN (programActor2LastName)
AND programRoleFirstName NOT IN (programActor3FirstName) AND programRoleLastName NOT IN (programActor3LastName)
AND programRoleFirstName NOT IN (programActor4FirstName) AND programRoleLastName NOT IN (programActor4LastName)
AND programRoleFirstName NOT IN (programActor5FirstName) AND programRoleLastName NOT IN (programActor5LastName)
AND programRoleFirstName NOT IN (programActor6FirstName) AND programRoleLastName NOT IN (programActor6LastName)
AND programRoleFirstName NOT IN (programActor7FirstName) AND programRoleLastName NOT IN (programActor7LastName))
UPDATE #programWatched
SET programActor8 = programActor8LastName + ' , ' + programActor8FirstName
-- Channel (provider) Call Letters, Display Name and Type
-- Is this correct? Should we get the channelId from the schedule table?
-- Is this efficient? View execution plan
UPDATE #programWatched
SET tchannelId = (SELECT TOP 1 c.channelId
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram)
UPDATE #programWatched
SET callLetters = (SELECT TOP 1 c.channelCallLetters
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET displayName = (SELECT TOP 1 c.channelDisplayName
FROM RMS_EPG..channel c
JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET type = (SELECT TOP 1 c.channelType
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
UPDATE #programWatched
SET networkAffiliation = (SELECT TOP 1 c.channelNetworkAffiliation
FROM RMS_EPG..channel c
INNER JOIN RMS_EPG..schedule s on s.channelID = c.channelID
WHERE s.programId = tprogram and s.channelId = tchannelId)
IF @TerseMode = 0
SELECT *
FROM #programWatched
ORDER BY toriginDateTime
ELSE
-- Get only Genre, title, show date/time, rating, call letters
SELECT tDeviceId, tprogramTitle, tprogramEpisodeTitle, programGenre, toriginDateTime, programMPAARating, programVCHIPRating, tchannelCallName
FROM #programWatched
ORDER BY toriginDateTime
DROP TABLE #programWatched
SET NOCOUNT OFF
GO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I also tried a query that populates some of its columns via subqueries. The query works fine when executed by the SQL Sevrer Query Analyzer,
meaning that all columns contain values, but when executed from SSRS, the columns that are poulated by the subqueries are empty, and only the columns that are not set by subqueries contain values:
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
SELECT PW.DeviceID,
PW.originTime AS 'When Watched',
PW.programID,
PW.Duration AS 'Duration Seconds',
(SELECT TOP 1 programTitle FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime
AND DATEADD(second, durationSecs, DW_EPG.scheduleTime)) AS Title,
(SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN DW_EPG.scheduleTime AND
DATEADD(second, durationSecs, DW_EPG.scheduleTime)) As program,
(SELECT TOP 1 programCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime BETWEEN
DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Genre,
(SELECT TOP 1 programSubCategoryTypeValue
FROM RMS_EPG..programCategory PC
INNER JOIN RMS_EPG..programSubCategoryType PSCT ON psct.programSubCategoryTypeId = PC.programCategoryId
INNER JOIN RMS_EPG..programCategoryType PCT ON PCT.programCategoryTypeId = PSCT.programCategoryTypeId
WHERE PC.programID = (SELECT TOP 1 program FROM DW_EPG WHERE DW_EPG.programId = PW.programId AND PW.originTime
BETWEEN DW_EPG.scheduleTime AND DATEADD(second, durationSecs, DW_EPG.scheduleTime))) AS Category
FROM DW_EventClientProgramWatched PW
ORDER BY DeviceId, programId, originTime
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Any help is appreciated
Hi! I have a general SQL CE v3.5 design question related to table/file layout. I have an system that has multiple tables that fall into categories of data access. The 3 categories of data access are:
1 is for configuration-related data. There is one application that will read/write to the data, and a second application that will read the data on startup.
1 is for high-performance temporal storage of data. The data objects are all the same type, but they are our own custom object and not just simple types.
1 is for logging where the data will be permanent - unless the configured size/recycling settings cause a resize or cleanup. There will be one application writing alot [potentially] of data depending on log settings, and another application searching/reading sections of data.
When working with data and designing the layout, I like to approach things from a data-centric mindset, because this seems to result in a better performing system. That said, I am thinking about using 3 individual SDF files for the above data access scenarios - as opposed to a single SDF with multiple tables. I'm thinking this would provide better performance in SQL CE because the query engine will not have alot of different types of queries going against the same database file. For instance, the temporal storage is basically reading/writing/deleting various amounts of data. And, this is different from the logging, where the log can grow pretty large - definitely bigger than the default 128 MB. So, it seems logical to manage them separately.
I would greatly appreciate any suggestions from the SQL CE experts with regard to my approach. If there are any tips/tricks with respect to different data access scenarios - taking into account performance, type of data access, etc. - I would love to take a look at that.
Thanks in advance for any help/suggestions,
Bob
When users enter text into a textbox, to be INSERTed into my table, SQL Server throws an error if their text contains a single quote.
For example, if they enter "It's great!" then it causes this error:Error: Incorrect syntax near 's'. Unclosed quotation mark after the character string ''.
How can I allow text with single quotes to be inserted into the table?
Here's my code:
string strInsert = "INSERT INTO [Comments] ([GameID], [UserID], [Comment]) VALUES (@GameID, @UserID, @Comment)";
SqlConnection myConnection = new SqlConnection(<<myconnectionstuff>>);SqlCommand myCommand = new SqlCommand(strInsert, myConnection);
myCommand.Parameters.Add( "@GameID", Request.QueryString["GameID"] );myCommand.Parameters.Add( "@UserID", (string)Session["UserID"] );myCommand.Parameters.Add( "@Comment", ThisUserCommentTextBox.Text );
try {myCommand.Connection.Open();myCommand.ExecuteNonQuery();}
catch (SqlException ex) {ErrorLabel.Text = "Error: " + ex.Message;}
finally {myCommand.Connection.Close();}
I WANT TO INSERT A SINGLE QUOTE IN TEXT AS "ABC'S"
INSERT INTO TABLE1 (CODE,NAME) VALUES ('A001','ABC'S')
Hi
how to load text file into single row
I already created dts using
Read File Transformation to place
data in to buffer table then
update row in main table
Is Any way to do it without using DTS , just with T- Sql or bcp ?
I wish to return a list of selected integers as a single string. So instead of getting
24
36
48
I get 24/36/48.
My select query:
SELECT CONVERT (varchar(10), quantity) + '/' FROM flexing_stock_transactions WHERE item = 'CH' AND week = 35 GROUP BY quantity ORDER BY quantity
returns
24/
36/
48/
How can I achieve my goal please?
greetings,i was wondering is it better to have multiple small stored procedures or one large store procedure ???? example : 100 parameters that needs to be inserted or delete ..into/from a table.............is it better to break it up into multiple small store proc or have 1 large store proc....thanks...............
View 3 Replies View RelatedI'm doing a BCP of a large table 37 million rows. On a single CPU server, SQL 7, sp 3, with 512 meg of RAM, this job runs in about 3 hours. On a 8 way server with 4 Gig of RAM, SQL 7 Enterprise, this job runs 12 hours and is only a third done. The single CPU machine is running one RAID 5 set while the 8 way server is running 4 RAID 5 sets with the database spread out over two of them.
Is there something obvious that a single CPU box would run this much faster?
Update TableName
Set Field2 = 'This text contains '' single quote's'
Where Field1 = 10
How is this usually done?
Thanks
How can we create a DB for a single attribute such as ORDER DETAILS, CASH RECEIPT, TAX INVOICE having more than 2 text fields.
Also, in every form attribute such as order id is not present - in order identify the same as a primay key. So, which other attributes or fields can be considered as a primary key.