I have Reporting Services 2005 installed on my Windows XP machine. I can access the Report Manager home page with the built-in Administrator account. However, my own account, which is a member of the Computer Admin group, is denied access with a 401.3 error. The 401.3 seems to be access denied due to not being on the ACL. I am using simple file sharing. What should I do to give access to my own account?
First off, forgive the ignorance that I'm sure to display in this post. I'm a total newbie with SRSS and have been using it to follow along with the tutorials offered via the SQL Express website. I'm using it strictly for learning on my local machine for the time being.
All had been working well with Reporting Services until I upgraded Vista Ultimate 64-bit (which was running in free 30-day trial unactivated Evaluation mode) sideways to Vista Ultimate Upgrade Edition 64-bit Edition. (Sounds confusing, I know.) I also subsequently installed a SQL Server 2k5 critical update which was recommended by Windows Update.
Now when I attempt to access Report Manager via localhost the "Home page" is incomplete, showing only the SSRS "Home" page header. There are no properites, data sources, config options, etc. outside of links for "Home|Help". I am running IE as an Admin and all the Reporting Services Configuration settings are green.
Also, when I attempt to deploy from VS 2005 I now receive the error: "Permissions granted to user 'NT AuthorityNetwork Service' are insufficient ..."
Some of the settings inside the Report Sever Config are as follows:
Windows Service Identity:
Service Acct: NT AuthorityNetwork Service; Built-in Account: Network Service
Web Service Identity:
Asp.net Service Account; NT AuthorityNetwork Service; Report Server and Manager are both using Classic.Net AppPool
I've attempted for hours to weed through Google and this forum but have repeatedly wound up back where I started and more confused than when I started. I would deeply appreciate any help in resolving this matter.
I added a new windows user "ReportUser" which is a local user (not in administrator group). When I connect to the report manage's web page, I use reportuser to log in (when the anonymous access is disabled it will ask a log in). Report builder icon is not showing up on the report manager home page.
If I log in as a user in administrator group, the reportr builder icon shows up so I can download it and build report.
I have assigned reportuser "Content manager" and "repoter builder" access to the home folder. Is there anything else I have to do to make the report build icon show up on the home page?
Is it possible to add hyperlinks to the Report Manager Home Page that link to other aspx pages? I have created some associated data entry aspx pages that I want to enable access to from the Report Manager Home Page (if possible).
Hi all. My name is Guilherme and I'm a Braziliam software developer.
I've installed on my computer all the software required to work with MS SQL RS. I log on this computer using my domain user. and a few days ago i needed to change my password (network policy)
Now, when I open the adress http://localhost/reports on my computer, I can't see the installed reports, neither the configuration page.
Hi All, In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far: 1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior 3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
I want each item of the list in a new page. So I checked the "Insert page break after this table" of the table properties to make sure that the next table is rendered on the next page.
But printing or exporting the report, a blank page with just the header and the footer is printing.
Is there a way to remove this last extra blank page?
I'm getting a blank Report Manager Page or a recurring username popup for users from another domain added to Reporting Services. Adding the users to the Local Administrators group on the Reporting Services server solves the problem but for security reasons this obviously is not ideal.
I've tried adding a Global Group from the other domain to a local group on the RS server and adding the local group to RS as a role. I've tried adding the Global Group from the other domain as a role. I've tried adding individual users from the other domain to RS I've tried adding the Domain Users group from the other domain to the Local Users Group on the RS Server.
What am I missing? It should be as simple as "click, click, add group and like magic, it works"
Since migrating Reporting Services from SQL 2005 to SQL 2008, the Last Run date, visible on the Details view of reports in a folder under Report Manager, has been blank. I would hope that this is supposed to be populated and equivalent to the "When Run" date visible in the 2005 version of Report Manager. Any setting that needs to be configured in order for this to show, or if this has been reported as a bug?
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app 2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown 3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
I have installed the Sql Server 2005 reporting services and I see that two default directories being created in IIS (Report and ReportServer..). For some reason, if I type http://localhost/reports, I am unable to see the report manager homepage. Can anybody suggest me if I need to configure any more stuff to see the report manager?
I enabled the anonymous authentication and still cannot see....
I can see the webservice however by typing http://localhost/reportserver...
When viewing reports in Report Manager, I can't keep a consistent view. Some reports are on several pages, requiring the move to the next page, and some just appear as one long report to scroll down through. I cannot find any difference in the reports to indicate what causes that. I had posted this question before, and thought I had found the answer (moving info out of the table header and putting it in a group header) that only worked on one occasion and I still have inconsistent reports. Does anyone have an idea why this is happening?
I don't have page breaks set on any groups in these reports, at least none that I am aware of. I have checked one against the other to see if I can find any difference, but nothing as yet.
I have uploaded a html-page to the Report Manager, the html-page has a img-tag with a src="Picture1.png" in it. The image is then uploaded to the same folder as the html-page. When I browse the html-page the image is not found, red cross, does anyone know why this happens?
In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the 1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to false - the header doesn't print - it just leaves the same amount of space. How do you get the report to ignore that. I do have a report header built into the body of my report. I have tested this by increasing the size of my page header and it does move the report up or down on the 1st page by that amount.
hi i am very concerned about this problem in my report.
to solve this problem i increased the height of page footer,blank page vanishes but the page footer is not printing on every page,it is only printing on 1 st page .
i am having probelm because the records from the dataset are more than the page limit , page break is there but no footer is printing on the second page only blank space is there.
I've received a couple of complains about a website I've been working on the past year or so: http://www.ipcamerademos.com/
I can open and browse the website fine, in both MS Internet Explorer and Firefox. But some people are getting some error opening up the website (home page):
Using System Role Assignment I grant a domain user account "System Administrator" & "System User" within Reporting Services.
Then I connect via IE7 to Report Server with the domain account that has been granted the above rights. The page comes up but the "Contents" and "Properties" tabs are missing. This user can use "Site Settings" and perform admin though.
If I assign the users domain account to the local Administrator group on the Win 2003 Server, then when they reconnect to Reporting Services the missing tabs appear.
We are a development shop, need some of our qa testers and developers to have admin rights within Reporting Services but don't want to grant them local Administrator rights on the server. This could also be an issue upon deployment at customer sites.
So how to get round this. I have been trying ACL's on the Reporting Services directorys, ASP.Net security etc but with no success.
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
I have a simple WSS 2.0 SharePoint site for my SSRS deployment which I would like to link my users to from the SSRS home page. Is it possible to add a link or shortcut to my SSRS home page without embedding it inside of a document or report?
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
When I am trying http://localhost/Reports/Pages/Folder.aspx
I am not seeing the all too familier "Contents" and "Properties" tabs along with deployed reports. Once in a while, I see that, but most of the time it is missing. Reporting Services got installed correctly though.
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports Report that links to another report Both reports return more than one page Reporting Services installed Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
I have installed MDS while installing SQL Server 2014 on my local machine ( windows 10). However when I try accessing the home page of Master Data Manager, it is giving access denied error. I am unable to access the Master Data Manager itself. MDS Database and Web Application are using same user account which is Administrator on the system.
I installed Reporting Services 2014 on Windows 7. When i am trying to start home page i can see only HTML page and the text: "localhost/reports - /",then double lines (<hr><hr>) and text "Microsoft SQL Server Reporting Services Version 12.0.4100.1"Maybe the windows user (SERVER_NAMEADMINISTRATOR) has not sufficient permissions ?
