My SP Works On 2005 Bit Not On 2000 It Doesn't Step Through My Code.

Aug 23, 2007



Hi

I have a SP that works on SQL 2000 but not on 2005

It is just suppose to step through my code and insert values into tables where it finds the "ticked" values

here is apiece of my code. I hope it Helps.







Code Snippet
INSERT INTO Members (ClientID, Name, Surname, Email, Username, Password, Active, WlcSent)
SELECT ClientID, [Name], Surname, Email, Username, Password, Active, [Welcome Sent]
FROM StageMemberUploading
WHERE ID = @numValues

SET @CurrentValue = (SELECT SCOPE_IDENTITY())
IF @ClientID IS NOT NULL BEGIN
INSERT INTO MemberUsergroup (MemberID, ClientID, UsergroupID)
VALUES (@CurrentValue, @ClientID, @UsergroupID)
END
IF @DateOfBirth IS NOT NULL BEGIN
INSERT INTO _MemberProfileCharacterValues (MemberID, OptionID, OptionValue)
VALUES (@CurrentValue, 1, @DateOfBirth)
END
-------------------My Code Stops here ------------------------------
IF @Male = 'x' BEGIN
INSERT INTO _MemberProfileLookupValues (MemberID, OptionID, ValueID)
VALUES (@CurrentValue, 2, 1)
END
IF @Female = 'x' BEGIN
INSERT INTO _MemberProfileLookupValues (MemberID, OptionID, ValueID)
VALUES (@CurrentValue, 2, 3)
END


Any help would be greatly appreciated

Kind Regards
Carel greaves

View 5 Replies


ADVERTISEMENT

Select Records Between Dates - Query Works In VS 2005 But It Doesn't In Asp 3

Nov 9, 2006

Hello. I'm having troubles with a query that (should) return all therecords between two dates. The date field is a datetime type. The db isSQL Server 2000. When I try thisSELECT RESERVES.RES_ID, PAYMENTS_RECEIVED.PYR_ID,PAYMENTS_RECEIVED.PYR_VALUE, PAYMENTS_RECEIVED.PYR_DATE,CUSTOMERS.CUS_NAMEFROM RESERVES LEFT OUTER JOINPAYMENTS_RECEIVED ON RESERVES.RES_ID =PAYMENTS_RECEIVED.RES_ID LEFT OUTER JOINCUSTOMERS ON RESERVES.CUS_ID = CUSTOMERS.CUS_IDWHERE (PAYMENTS_RECEIVED.PYR_DATE >= '2006-03-20 00:00:00') AND(PAYMENTS_RECEIVED.PYR_DATE < '2006-03-27 00:00:00')on a "query builder" in visual studio, I get the results that I want.But when I use exactly the same query on an asp 3 vbscript script, Iget no results (an empty selection).I've done everything imaginable. I wrote the date as iso, ansi, britishformat using convert(,103) (that's how users will enter the dates),i've used cast('20060327' as datetime), etc. But I can't still get itto work. Other querys from the asp pages work ok. Any ideas?thanks a lot in advance

View 1 Replies View Related

DTS Code Works Only With VS 2003 But Not With VS 2005 ?

Feb 21, 2007

Hi;

I wanted to use the following code to run a DTS package from a 2005 Web Page code behind partial class. This code works fine in a VB 2003 module

going against  SQl Srvr 2000.

Here is the code: (It initiates from a button click handler)

Dim conn As New SqlConnection("initial catalog=MY_Data;server= XYZ081552X7X441TRSQL;integrated security=SSPI")

Dim hold1 As Integer

Dim hold_source As String = ""

Dim hold_desc As String = ""

Try

conn.Open()

Catch ex1 As Exception

MsgBox("The Test connection failed to open" & vbCrLf & ex1.Message)

End Try

MsgBox("About to create a DTS object")

Dim oPackage As New DTS.Package2Class (Compiler doesn't like this line) Type DTS.Package2Class is not defined.

 

Dim oStep As DTS.Step (Or this one) Type DTS.step is not defined. 

oPackage.LoadFromSQLServer("XYZ81552X7X441TRSQL", , , DTS.DTSSQLServerStorageFlags.DTSSQLStgFlag_UseTrustedConnection, , , , "cpyPrinters2Excel", )

For Each oStep In oPackage.Steps

oStep.ExecuteInMainThread = True

Next

oPackage.Execute()

For Each oStep In oPackage.Steps

If oStep.ExecutionResult = DTS.DTSStepExecResult.DTSStepExecResult_Failure Then

oStep.GetExecutionErrorInfo(hold1, , )

Else

End If

Next

oPackage.UnInitialize()

oPackage = Nothing

conn.Close()

 

Has Microsoft changed the DTS objects so that they work only with  SQL Srv 2005 ?

Thanks for your insights.

 

 

View 3 Replies View Related

Step By Step For Upgrading SQL Server 2000 Cluster To SQL Server 2005 Cluster

May 15, 2008



Friends -

Could any one of you provide steps for upgrading SQL Server 2000 cluster to SQL server 2005 cluster.

My environment is Windows 2003 server.

Appreciate your support.

Cheers
VSH

View 1 Replies View Related

Help With Converting Code: VB Code In SQL Server 2000-&&>Visual Studio BI 2005

Jul 27, 2006

Hi all--I'm trying to convert a function which I inherited from a SQL Server 2000 DTS package to something usable in an SSIS package in SQL Server 2005. Given the original code here:
Function Main()
on error resume next
dim cn, i, rs, sSQL
Set cn = CreateObject("ADODB.Connection")
cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"
set rs = CreateObject("ADODB.Recordset")
set rs = DTSGlobalVariables("SQLstring").value

for i = 1 to rs.RecordCount
sSQL = rs.Fields(0).value
cn.Execute sSQL, , 128 'adExecuteNoRecords option for faster execution
rs.MoveNext
Next

Main = DTSTaskExecResult_Success

End Function

This code was originally programmed in the SQL Server ActiveX Task type in a DTS package designed to take an open-ended number of SQL statements generated by another task as input, then execute each SQL statement sequentially. Upon this code's success, move on to the next step. (Of course, there was no additional documentation with this code. :-)

Based on other postings, I attempted to push this code into a Visual Studio BI 2005 Script Task with the following change:

public Sub Main()

...

Dts.TaskResult = Dts.Results.Success

End Class

I get the following error when I attempt to compile this:

Error 30209: Option Strict On requires all variable declarations to have an 'As' clause.

I am new to Visual Basic, so I'm on a learning curve here. From what I know of this script:
- The variables here violate the new Option Strict On requirement in VS 2005 to declare what type of object your variable is supposed to use.

- I need to explicitly declare each object, unless I turn off the Option Strict On (which didn't seem recommended, based on what I read).

Given this statement:

dim cn, i, rs, sSQL

I'm looking at "i" as type Integer; rs and sSQL are open-ended arrays, but can't quite figure out how to read the code here:

Set cn = CreateObject("ADODB.Connection")

cn.Open "Provider=sqloledb;Server=<server_name>;Database=<db_name>;User ID=<sysadmin_user>;Password=<password>"

set rs = CreateObject("ADODB.Recordset")

This code seems to create an instance of a COM component, then pass provider information and create the recordset being passed in by the previous task, but am not sure whether this syntax is correct for VS 2005 or what data type declaration to make here. Any ideas/help on how to rewrite this code would be greatly appreciated!

View 7 Replies View Related

SQL 2000 To SQL 2005 Works For One 2000 Server But Not The Next

Jun 15, 2006



I have several SQL 2000 servers I need to setup transactional (non updatable) replication with. The structure is:

SQL Server 2000 as Publisher/Distributor

SQL Server 2005 Standard as Subscriber

The connection is via the Internet with snapshots using FTP.

I setup the first set (2 databases at location A). They work wonderfully. I created the publication and then subscribed using MGMT Studio for 2K5.

II am setting up the same scenario for location B. Here is my problem:

In MGMT Studio I connect to the publisher (SANDRA). I right-click a publication and choose New Subscriptions..., the publication is already selected. I click next - Run each agent at its Subscriber is selected and the only option (this is desired), I click Next

HERE IS THE PROBLEM:

On the Subscriber's screen there are no Subscribers listed. When setting up location A the subscribing server was listed and I could choose a database. The Next button is greyed out and there is no way to create/add one.

I tried setting up the subscription by right-clicking the subcribing server's Replication folder in MGMT Studio but I get the same result (except that I have to authenticate with the publishing server which works fine).

WHAT'S DIFFERENT:

Location A is SQL Server Standard (SP3) running on SBS2K3. It is obviously on a domain and so SQL Server and the SQL Agent are running under domain accounts. Location B is a Windows XP SP2 machine running SQL Server Personal Edition (it actually says Development Edition in the properties window).

The databases are the same strucutre, different data. At location A the firewall is set to allow 1433->*any* and *any*->1433 where *any* is 1024 or higher. On the XP machine the firewall is set to allow port 1433. I don't think this is the issue because I've turned the firewall off on the XP machine and I get the same result.

ANY IDEAS?

View 5 Replies View Related

Bit-data From SQL Server 2000 (2005 Working, 2000 Doesn't)

May 19, 2008

 Hi, I am trying to edit some data from a SQL2000-datasource in ASP.NET 2.0 and have a problem with a column that has bit-data and is used for selection. SQL2005 works fine when declaring             <SelectParameters>                <asp:Parameter DefaultValue="TRUE" Name="APL" Type="boolean" />            </SelectParameters>When running this code with SQL2000, there are no error-msgs, but after editing a record the "APL"-column looses its value of 1 and is set to 0. Looks like an issue with type-conversion, we've hit incompatibilities between SQL200 and 2005 with bit/boolean several times before. So, how is this done correctly with SQL2000?  (I've tried setting the Type to "int16" -> err. Also setting Defval="1" gave an err) ThanksMichael   

View 2 Replies View Related

Tx Replication Works In 2000 But Not In 2005?

Apr 28, 2006

Hello,

I've got a simple transactional replication set up. I have a separate publisher, distributor, and subscriber with 76 articles (tables only) being pushed from the distributor.

I have this exact setup with the same tables and data working in the SQL 2000 environment. I am testing replication on our SQL 2005 test servers before moving to production, however when the distributor attempts to push out the initial snapshot I keep getting this error.

Error messages:


Incorrect syntax near ')'. (Source: MSSQLServer, Error number: 102)
Get help: http://help/102

Incorrect syntax near ')'. (Source: MSSQLServer, Error number: 102)
Get help: http://help/102

Incorrect syntax near the keyword 'end'. (Source: MSSQLServer, Error number: 156)
Get help: http://help/156

Anyone know anythign about it?

Thank you,

Aaron Lowe

View 17 Replies View Related

Query Works In SQL 2000 But Not In SQL 2005

Mar 15, 2006

The following query works in SQL Server 2000 but gives follwoing error in SQL Server 2005

Msg 8114, Level 16, State 5, Line 1

Error converting data type varchar to float.

=======================

SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL
AND VWCONTACT.EMAIL LIKE '%@%'
AND NOT EXISTS (SELECT VWCONTACT.ID
FROM (SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) >= 77002) TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) <= 77099) TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1
WHERE VWCONTACT.ID = NESTEDQUERY1.ID)
AND NOT EXISTS (SELECT VWCONTACT.ID
FROM (SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77336)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77338)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77345)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77365)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77396)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77489)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77504)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77598)) ATTR
ON ATTR.CONTACTID = VWCONTACT.ID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1
WHERE VWCONTACT.ID = NESTEDQUERY1.ID)
AND NOT EXISTS (SELECT VWCONTACT.ID
FROM (SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 23102
AND ATTRIBUTEVALUE = 'Houston') TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22944
AND ATTRIBUTEVALUE = 'TX') TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ) NESTEDQUERY1
WHERE VWCONTACT.ID = NESTEDQUERY1.ID)

when I modify the query like the following in SQL Server 2005 it works. Now the problem is since it is adynamically generated query from our application based on users selection of criteria, it means a lot to us to change the code.

PLEASE HELP....

=====================================================

SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL
AND VWCONTACT.EMAIL LIKE '%@%'

EXCEPT

((SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) >= 77002) TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) <= 77099) TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL )
UNION
(SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77336)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77338)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77345)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77365)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77396)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77489)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77504)
OR (CONTACTATTRIBUTEID = 22943
AND ISNUMERIC(ATTRIBUTEVALUE) = 1
AND CONVERT(float,ATTRIBUTEVALUE) = 77598)) ATTR
ON ATTR.CONTACTID = VWCONTACT.ID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL )
UNION
(SELECT DISTINCT VWCONTACT.[ID] ID
FROM VWCONTACT
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 23102
AND ATTRIBUTEVALUE = 'Houston') TMP0
ON VWCONTACT.ID = TMP0.CONTACTID
JOIN (SELECT CONTACTID
FROM VWCONTACTATTRIBUTEVALUE
WHERE CONTACTATTRIBUTEID = 22944
AND ATTRIBUTEVALUE = 'TX') TMP1
ON VWCONTACT.ID = TMP1.CONTACTID
WHERE VWCONTACT.ACCOUNTID = 2615
AND VWCONTACT.VIRTUALDELETIONDATE IS NULL ))

View 3 Replies View Related

Sample Files From The Book SQL Server 2005 Reporting Services Step By Step

Jan 18, 2008



Hi All,

Please let me know where can i find the sample files and rs2005sbsDW database in msdn library as i dont have CD provided along with the book.

Please give me the link of the sample files so that i can download it for testing the sample application.

Regards,
Prabhanjana

View 1 Replies View Related

Select Statement Works In 2000 But Not In 2005

Jan 2, 2008

I hope this is a easy one. We are trying to find a fix for a select statement that works in 2000 but not in 2005 with a simple select statement.

The easiest statement that will duplicate the error is:

TestTable has 3 columns: Primary, strTest, strTest2



SELECT strTest, strTest AS Name
FROM TestTable
ORDER BY strTest2



If you sort by the Primary column you will not receive an error.

How can you select the same column twice and then sort in the SQL statement?

View 3 Replies View Related

Working With SQL 2005 Interface But Internally It Works As SQL 2000

Aug 27, 2007

Hi! I have installed SQL 2000 and SQL 2005 in my computer.I tried to use some new features like row_number(),try..catch.. but are not working giving syntax error.β€? So someone told me that i had to check the version and when I cheked I realized I was working with SQL 2000: β€œMicrosoft SQL Server 2000 - 8.00.194 (Intel X86) Aug 6 2000 00:57:48 Copyright (c) 1988-2000 Microsoft Corporation Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)β€? So, how can I change it for working with SQL 2005?. It’s like I’m working with SQL 2005 interface but internally it works as SQL 2000. Can you help me please?

View 2 Replies View Related

Working With SQL 2005 Interface But Internally It Works As SQL 2000

Aug 27, 2007

Hi!

I have installed SQL 2000 and SQL 2005 in my computer. But none of 2005 feature is working. So someone told me that i had to check the version and when I cheked I realized I was working with SQL 2000:
€œMicrosoft SQL Server 2000 - 8.00.194 (Intel X86)
Aug 6 2000 00:57:48
Copyright (c) 1988-2000 Microsoft Corporation
Developer Edition on Windows NT 5.1 (Build 2600: Service Pack 2)€?

So, how can I change it for working with SQL 2005?. It€™s like I€™m working with SQL 2005 interface but internally it works as SQL 2000. Can you help me please?

View 1 Replies View Related

SSIS Package Doesn't Execute As A Job Step

May 3, 2006

I have this SSIS package which just doesn't seem to run when executing as a sql job and I keep getting this error:

"The command line parameters are invalid. The step failed."

I read some of the comments in forums and they were suggesting to verify the command line for the sql job since there is known bug in the command line for sql job.

But that didn't seem to resolve it and the reason could be one of the variable values that I am trying to set.

In this package one of the variables that I am trying to set is the connection string and my command line looks like this

dtexec /SQL "TestPkg" /SERVER [SVRNAME] /MAXCONCURRENT "-1" /CHECKPOINTING OFF
/SET " package.variables[User::MetaDataConnectionString].Value";"Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;"

When I try to run this from the command line I get the error as:

Argument " package.variables[User::MetaDataConnectionString].Value;Data Source=[SVRNAME];Initial Catalog=[DBNAME];Integrated Security=True;""
for option "set" is not valid.

I think the issue is in the set parameter where it seems to be intepreting the ;'s in the connection string as part of its command (which I seem to be escaping by putting them in quotes but it seems to be stripping them off)

Has anyone else encountered this issue? Is there any other escape character that I should be using?

Any help will be greatly appreciated.

View 5 Replies View Related

Long Running Query In SQL 2005 But Works Fine In SQL 2000

Mar 28, 2008

I have a simple update statement that is running forever in SQL 2005 but works fine in SQL 2000. We have a new server we put SQL 2005, restored db. The table in question WEEKLYSALESHISTORY I even re-indexed all the indexes and rebuilt the stats as well. But still no luck, still running extremely long. 1 hour 20 minutes.

I'll try to give you some background on these table. Weeklysalehistory has approx 30 fields. I have 11 indesxes set up weekending date being one of them. And replication control has index on lasttrandatetime as well. So I think my indexes are fine.

/* Update WeekEnding Date for current weeks WeeklySales Records */
Update WeeklySalesHistory set
weekendingdate =
(SELECT LastTransDateTime from ReplicationControl
where TableName = 'WEEKHST')
where weekendingdate is null

Weekly sales has approx 100,000,000 rows
Replication control has 631,000 (Ithink I can delete some from here to bring it down to 100 or 200 records) Although I don't think this is issue since on 2000 has same thing and works fine.


I was trying to do this within SSIS and thought that was issue. I am new so SSIS but it runs long even if I just run it as a job with this simple Update statement so I think its something with tables, etc that is wrong.

One thing on noticed if I look at the statistics in SQL Server Management studio there is a ton of stats. some being statistics on indexes which makes sense then I have a ton of hind_113_9_6 and simiiar one like this. I must have 90 or so named like this. Not sure how to check on SQL 2000 all the stats to see if they moved over from there or what. I checked a few other tables and don't have all these extra stats. Could this be causing the issue do I need to delete all these extras? Any help would be greatly appreciated.


Stacy

View 5 Replies View Related

Configuring SQL Server Express In SqL Server 2005 Pro To Support MSVisual C# 2005 Step By Step

Feb 4, 2007

Visual C# 2005 Step by Step €“ John Sharp

Intel D975XBX €“ 930 €“ 2GB ram €“ HD 300GB - MatroxVD
Windows XP Sp2 + updates
Visual Studio 2005 Professional edition
SQL Sever 2005 Standard Edition

20070203
Install Practice Files at D:Program FilesMicrosoft PressVisual C Sharp Step by Step.

Configuring SQL Sever Express Edition
Hostname - xxxxxxxxx..

At sqlcmd €“s xxxxx...SQLExpress €“E got - Pipes error.

Open Microsoft SQL Sever 2005 - Configuration Tools €“ SQL Configuration Manager €“ select Protcols for SQLEXPRESS €“ select Named Pipes €“ enable €“ close.

At sqlcmd €“s xxxxx..SQLExpress €“E get Sqlcmd: €˜ €˜ : Unknown Option. Enter €˜ -? €˜ for help.

Chdir C:Documents and SettingsAll UsersStart MenuProgramsMicrosoft Server 2005
Sqlcmd €“s xxxxxx..SqlExpress €“E
Hresult 0x2, Lvel 16, State 1
Named Pipes Provider: Couldnot open a connection to SQL Server [2].
Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections..
Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.

How do I fix this?

Need to be able to to use the Northwind Traders data base

Thanks

View 1 Replies View Related

Transact SQL AND Works, OR Doesn't

Mar 31, 2006

I have a stored procedure with a where clause like this:
WHERE
  Q.EffectiveDate >= @FromEffectiveDate  AND   Q.EffectiveDate <= @ToEffectiveDate AND   I.InsuredName LIKE '%' +  isnull(@PreQuoteDesc,I.InsuredName) + '%'  AND     isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBProperty,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBGeneralLiability,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBInlandMarine,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBMotorTruckCargo,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBOwnersContractorsProtective,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBSpecialEvents,Q.LineOfBusinessDescription,'') + '%'   AND   rsu.FirstName LIKE '%' + isnull(@OwnerFirstName, rsu.FirstName) + '%' AND  rsu.LastName LIKE '%' + isnull(@OwnerLastName, rsu.LastName) + '%' AND   Q.quoteID  = isnull(@quoteID,Q.QuoteID) AND   Q.QuoteStatusID = isnull(@quoteStatusID, Q.QuoteStatusID) AND  rsu.AspNetUserID = isnull(@ASPNetUserID, rsu.AspNetUserID)
-------------------------------------------------------------------
All is working well except for the line of business:
------------------------------------------------------------
AND     isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBProperty,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBGeneralLiability,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBInlandMarine,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBMotorTruckCargo,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBOwnersContractorsProtective,Q.LineOfBusinessDescription,'') + '%'   AND   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBSpecialEvents,Q.LineOfBusinessDescription,'') + '%'
---------------------------------------------------------------------------------
If the user checks just 'Property' results look like:
Property
Property
Property, General Liability
If the user checks just 'General Liability' the resultes look like:
Genral Liablility
General Liability
General Liability, Inland Marine
If the user checks both Property and General Liability all they get back is:
Property, General Liability
They should get back everything including just Property or just General Liability or both.
So I tried to change the ANDs to ORs and it doesn't work.
-----------------------------------------
AND  (   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBProperty,Q.LineOfBusinessDescription,'') + '%'   OR   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBGeneralLiability,Q.LineOfBusinessDescription,'') + '%'   OR   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBInlandMarine,Q.LineOfBusinessDescription,'') + '%'   OR   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBMotorTruckCargo,Q.LineOfBusinessDescription,'') + '%'   OR   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBOwnersContractorsProtective,Q.LineOfBusinessDescription,'') + '%'   OR   isnull(Q.LineOfBusinessDescription,'') LIKE '%' + coalesce(@LOBSpecialEvents,Q.LineOfBusinessDescription,'') + '%'
)
I know this is incredibly hard to follow because its incredibly hard to write out.
Is there anyone smart out there who can figure this out?
Thanks

View 2 Replies View Related

CLI Connection To SQL Works, C++ Doesn't

May 7, 2008

I'm trying to connect to my SQL, and both ways I tried with CLI work. However, I have no luck with native C++, with the same string. Any ideas why? Here's the error message I get, and the source.

IM008
[Microsoft][ODBC Driver Manager] Dialog failed







Code Snippet

#include<iostream>
#include<windows.h>
#include<sql.h>
#include <sqlext.h>
using namespace std;
#using <mscorlib.dll>
#using <System.dll>
#using <System.Data.dll>
using namespace System::Data;

void main()
{
System::Data::SqlClient::SqlConnection^ cSql=gcnew System::Data::SqlClient::SqlConnection("Data Source=II.II.II.II;Initial Catalog=XXXXX;Integrated Security=SSPI;uid=YYYYY;pwd=ZZZZZ");
cSql->Open();
cSql->Close();
System::Data::OleDb::OleDbConnection^ cOledb=gcnew System::Data::OleDb::OleDbConnection("Data Source=II.II.II.II;Initial Catalog=XXXXX;Integrated Security=SSPI;uid=YYYYY;pwd=ZZZZZ;PROVIDER=SQLOLEDB");
cOledb->Open();
cOledb->Close();

SQLRETURN iRet;
SQLHANDLE EnvHndl;
SQLHANDLE ConnHndl;
iRet = SQLAllocHandle(1, 0, &EnvHndl);
iRet = SQLSetEnvAttr(EnvHndl, 200, (SQLPOINTER)3, 0);
iRet = SQLAllocHandle(2,EnvHndl, &ConnHndl);

wchar_t ConnStr[255];
wcscpy(ConnStr,L"Data Source=II.II.II.II;Initial Catalog=XXXXX;Integrated Security=SSPI;uid=YYYYY;pwd=ZZZZZ;PROVIDER=SQLOLEDB");
short ConnStrLength=wcslen(ConnStr);
iRet = SQLDriverConnect(ConnHndl, 0, (wchar_t*)ConnStr, ConnStrLength, (wchar_t*)ConnStr, 255, &ConnStrLength, 1);

long NativeError;
wchar_t*Msg=new wchar_t[10000];
wchar_t*SqlState=new wchar_t[10000];
int iParDiag=1;
short MsgLen=10000;
iRet = SQLGetDiagRec(2, ConnHndl, iParDiag, SqlState, &NativeError, Msg, 512, &MsgLen);
wcout<<ConnStr<<L'';
wcout<<SqlState<<L'';
wcout<<Msg<<L'';
}

View 1 Replies View Related

ReplMerge.exe Works But RMO Doesn't -

May 14, 2007

I have been successful in getting a Merge Replication to happen via the web using ReplMerge.exe, but unsuccessful in doing the same using RMO.



The following code is what I am using for merge replication via the web using the ReplMerge.exe and this is working fine.



replString = "C:Program FilesMicrosoft SQL Server90COMREPLMERG.EXE"

Dim procID As Integer

Dim newProc As Diagnostics.Process

Dim si As Diagnostics.ProcessStartInfo

si.WindowStyle = ProcessWindowStyle.Hidden

newProc.StartInfo = si

newProc = Diagnostics.Process.Start(replString, "-Publication pub_mergetest

-Publisher publishername

-Subscriber subscribername

-Distributor distributorname

-DistributorLogin sa

-DistributorPassword pwd

-DistributorSecurityMode 0

-PublisherDB MergeTest-Publisher

-SubscriberDB MergeTest-Subscriber

-PublisherLogin sa

-PublisherPassword pwd

-SubscriberLogin sa

-SubscriberPassword pwd

-SubscriptionType 1

-SubscriberSecurityMode 0

-LoginTimeOut 30

-ParallelUploadDownload 1

-QueryTimeOut 300")



procID = newProc.Id

newProc.WaitForExit()

Dim procEC As Integer = -1

If newProc.HasExited = -1 Then

procEC = newProc.ExitCode

End If



However, I cannot get the same to work via RMO. The error i get back is "The process could not connect to subscriber "subscribername". What am I missing? Any help and feedback is greatly appreciated.



Dim _mergeAgent As MergeSynchronizationAgent = New MergeSynchronizationAgent()

_mergeAgent.Publication = "pub_mergetest"

_mergeAgent.Publisher = "publishername "

_mergeAgent.Subscriber = "subscribername"

_mergeAgent.Distributor = "distributorname"

_mergeAgent.DistributorLogin = "sa"

_mergeAgent.DistributorPassword = "pwd"

_mergeAgent.DistributorSecurityMode = SecurityMode.Standard

_mergeAgent.PublisherDatabase = "MergeTest-Publisher"

_mergeAgent.SubscriberDatabase = "MergeTest-Subscriber"

_mergeAgent.SubscriberLogin = "sa"

_mergeAgent.SubscriberPassword = "pwd"

_mergeAgent.SubscriberSecurityMode = SecurityMode.Standard

_mergeAgent.SubscriptionType = SubscriptionOption.Pull

_mergeAgent.PublisherLogin = "sa"

_mergeAgent.PublisherPassword = "pwd"

_mergeAgent.PublisherSecurityMode = SecurityMode.Standard

_mergeAgent.LoginTimeout = 30

_mergeAgent.QueryTimeout = 300

_mergeAgent.UseWebSynchronization = True

_mergeAgent.InternetUrl = "https://###.###.###.###/virtualdirectory/replisapi.dll"

_mergeAgent.InternetLogin = "domainusername"

_mergeAgent.InternetPassword = "pwd"

_mergeAgent.InternetTimeout = 5000

_mergeAgent.Synchronize()

View 3 Replies View Related

2000 Active X Doesn't Work In 2005

Feb 12, 2007

I have an active x script written in vb that just counts the records in a table and fails the step if there are not enough records. It is simple and effective. But when I transfered this task to my SSIS package I get a function not found error.

I am not familiar with active x or vb script so I have no idea what is wrong. I can do without while I build the package but I need it in the end to prevent possible problems....

Here is the script...

'**********************************************************************

' Visual Basic ActiveX Script

'************************************************************************

Function Main()

dim myConn

dim myRecordset

dim iRowCount

' instantiate the ADO objects

set myConn = CreateObject("ADODB.Connection")

set myRecordset = CreateObject("ADODB.Recordset")

' Init ADO Connection object

With myConn

.ConnectionString = "File Name=D:Data Linksmusic_load.udl;" 'Full path to the UDL

.Open

End With



mySQLCmdText = "Select 'totalcount' = Count(*) from fulltext"

myRecordset.Open mySQLCmdText, myConn

set Flds = myRecordset.Fields

set iRowCount = Flds("totalcount")

If iRowCount.Value < 1000000 then

' MsgBox "The number of products is: " & iRowCount.Value & ". The total number is wrong"

Main = DTSTaskExecResult_Failure

Else

' MsgBox "The number of products is: " & iRowCount.Value & ". The total number is good"

Main = DTSTaskExecResult_Success

End If



End Function

View 2 Replies View Related

DataSet Works... DataTable Doesn't... (ODBC)

Jun 21, 2007

I have a longstanding problem where Stored Procedures or complex T-SQL called from VB.NET will not populate a DataTable object, but will work fine with a DataSet.  For example:    'oConn is defined elsewhere...        Dim sErr as String = ""        Dim dt As New DataTable        If Not oConn Is Nothing Then            Try                Dim sSQL as String = "select 1"                Dim oCommand As New OdbcDataAdapter(sSQL, oConn)                oCommand.Fill(dt)            Catch ex As Exception                sErr = "Database Error: " & ex.Message            Finally                sqlCloseConnection(oConn)            End Try        End Ifthis works fine and my dt DataTable object gets one row.  However using this as the SQL:                Dim sSQL as String = "declare @foo table(mycol integer);insert @foo select 1;select mycol from @foo;"does not work.   It executes with no errors, but the DataTable has no rows.  Finally, if I replace the DataTable with:                Dim ds as DataSetI can then get the data in ds.Tables(0) no problem.So, if the results of the sql are a single result table being put at index 0 of a DataSet, why are they not being put in a single DataTable?When a sql is a simple select statement it always works directly to a DataTable.  Only when it's a SP or sql with some logic does it require the DataSet approach.  This is a reporting utility so I need to standardize the code though the sql will be dynamic. Any ideas?  

View 1 Replies View Related

Scheduled Job Doesn't Work, But Works Manually

Apr 17, 2007

I have scheduled a job in Management Studio, but it doesn't work. However, when I run it maually in Visual Studio it works. I have connected an outside server by mapping it to mine. Maybe this is the problem?

I have also tried to configure a linked server, but I cannot find out how to connect my SSIS package to the linked server.

Can anybody help me?

Thank's!

View 8 Replies View Related

Job Doesn't Work But Package Works Fine

Jun 26, 2007

hi,

I have many jobs on sql 05 and all work but one. This one writes to an Access DB on the same server as SQL. The package works fine. But when executed in the context of the SQL Agent job, it fails.

Jobs that write to a text file work fine. The Access DB has no password required. By the way, that job in sql 2000 worked fine.

Any ideas?

View 4 Replies View Related

'Run Package' Works On Server, But Doesn't Complete As Job.

Mar 10, 2008



I have an SSIS package is made up of SQL tasks and dataflows. The dataflows connect to an Oracle database using Native OLE DBOracle Provider for OLE DB (10g). This is the first package dealing with oracle that runs on the server.
I can execute the package manually by right clicking and going to 'Run Package' while logged in remotely from the server, but it gets hung up and does nothing if I run it as a job. I always have to quit the job. I can disable everything but the dataflows in the package and the job completes and runs fine.

Anyone have any ideas or similiar situations?

Thanks.

View 5 Replies View Related

RESTORE FILELIST Is Terminating Abnormally Error When Running A DTS Package In SQL 2005. Works Fine In SQL 2000

Oct 10, 2007

Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):


Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.

Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.

BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).

(5 row(s) affected)

Msg 213, Level 16, State 7, Line 1

Insert Error: Column name or number of supplied values does not match table definition.

Msg 3013, Level 16, State 1, Line 1

RESTORE FILELIST is terminating abnormally.

The code I am using is:


-- the original database (use 'SET @DB = NULL' to disable backup)

DECLARE @DB varchar(200)

SET @DB = 'Marketing'

-- the backup filename

DECLARE @BackupFile varchar(2000)

SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'

-- the new database name

DECLARE @TestDB2 varchar(200)

SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'

-- the new database files without .mdf/.ldf

DECLARE @RestoreFile varchar(2000)

SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2

DECLARE @RestoreLog varchar (2000)

SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2

-- ****************************************************************

-- no change below this line

-- ****************************************************************

DECLARE @query varchar(2000)

DECLARE @DataFile varchar(2000)

SET @DataFile = @RestoreFile + '.mdf'

DECLARE @LogFile varchar(2000)

SET @LogFile = @RestoreLog + '.ldf'

IF @DB IS NOT NULL

BEGIN

SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')

EXEC (@query)

END

-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'

-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'

-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'

-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'







IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)

BEGIN

SET @query = 'DROP DATABASE ' + @TestDB2

EXEC (@query)

END

RESTORE HEADERONLY FROM DISK = @BackupFile

DECLARE @File int

SET @File = @@ROWCOUNT

DECLARE @Data varchar(500)

DECLARE @Log varchar(500)

SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')

CREATE TABLE #restoretemp

(

LogicalName varchar(500),

PhysicalName varchar(500),

type varchar(10),

FilegroupName varchar(200),

size int,

maxsize bigint

)

INSERT #restoretemp EXEC (@query)

SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'

SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'

PRINT @Data

PRINT @Log

TRUNCATE TABLE #restoretemp

DROP TABLE #restoretemp

IF @File > 0

BEGIN

SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +

' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +

QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)

EXEC (@query)

END





View 1 Replies View Related

Query Works Fine Outside Union, But Doesn't Work .. .

Mar 31, 2004

hi all

I have the following query which works fine when it's executed as a single query. but when i union the result of this query with other queries, it returns a different set of data.

any one know why that might be the case??


select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc




i've included the union query here for completeness of the question



begin
declare @current_date datetime
set @current_date = GETDATE()


select top 100 _id, callback_date, priority, recency, frequency from
(
(
select top 10 _id, callback_date, 10 priority, @current_date recency, 1 frequency --, DATEPART(hour, callback_date) "hour", DATEPART(minute, callback_date) "min"
from topcat.class_contact
where status ='callback'
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date)) -- all call backs within that hour will be returned
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) <> 0)
order by callback_date asc
--order by priority desc, DATEPART(hour, callback_date) asc, DATEPART(minute, callback_date) asc, callback_date asc
)
union
(
select top 10 _id, callback_date, 9 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'callback'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
and (DATEPART(hour, callback_date) = 0)
order by callback_date asc
)
union
(
select top 10 _id, callback_date, 8 priority, @current_date recency, 1 frequency
from topcat.class_contact
where status = 'No Connect'
and callback_date is not null
and (DATEPART(year, callback_date) <= DATEPART(year, @current_date))
and (DATEPART(dayofyear, callback_date) <= DATEPART(dayofyear, @current_date))
and (DATEPART(hour, callback_date) <= DATEPART(hour, @current_date))
order by callback_date asc
)
union
(
select top 100 max(contact._id) "_id", max(old_trans.date) "callback_date", 7 "priority", max(old_trans.date) "recency", count(*) "frequency" --contact._id, contact.callback_date
from topcat.class_contact contact inner join topcat.MMTRANS$ old_trans on contact.phone_num = old_trans.phone
where contact.phone_num is not null
and contact.status = 'New Contact'
group by contact._id
order by "recency" desc, "frequency" desc
)
) contact_queue
order by priority desc, recency desc, callback_date asc, frequency desc

end

View 1 Replies View Related

Help: Why IN-Operator With Select-Statement It Doesn't Work? But With Given Values It Works

Jun 4, 2007

Hello to all,
i have a problem with IN-Operator. I cann't resolve it. I hope that somebody can help me.
I have a IN_Operator sql query like this, this sql query can work. it means that i can get a result 3418:
declare @IDM int;
declare @IDO varchar(8000);
set @IDM = 3418;
set @IDO = '3430' 
select *
from wtcomValidRelationships as A
where (A.IDMember = @IDM) and ( @IDO in (3428 , 3430 , 3436 , 3452 , 3460 , 3472 , 3437 , 3422 , 3468 , 3470 , 3451 , 3623 , 3475 , 3595 , 3709 , 3723 , 3594 , 3864 , 3453 , 4080 ))
but these numbers (3428 , 3430 , 3436 , 3452 , 3460 , 3472 , 3437 , 3422 , 3468 , 3470 , 3451 , 3623 , 3475 , 3595 , 3709 , 3723 , 3594 , 3864 , 3453 , 4080 ) come from a select-statement. so if i use select-statement in this query, i get nothing back. this query like this one:select *
from wtcomValidRelationships as A
where (A.IDMember = @IDM) and ( @IDO in (select B.RelationshipIDs from wtcomValidRelationships as B where B.IDMember = @IDM))
I have checked that man can use IN-Operator with select-statement. I don't know why it doesn't work with me. Could somebody help me? Thanks
I use MS SQL 2005 Server Management Stadio Express
Thanks a million and Best regards
Sha

View 2 Replies View Related

SQL Query That Works In SQL Server Management Studio, But Doesn't On .NET 2.0 Page

Feb 21, 2008

SELECT favorites.FID, favorites.filename, favorites.username, files.status, files.private, files.views, files.title FROM favorites INNER JOIN files ON favorites.filename = files.filename WHERE (favorites.username = @username) AND (files.status IS NULL) AND (files.private = @private)@private is manually set to 'no'@username is set to profile.usernamewhen I run the above query in microsoft sql server mgmt studio express on the database, it presents all the information i'm asking for very easily. however when i try to implement this query on a aspx .net2.0 page with teh sqldatasource and a gridview, no data is displayed.anyone know what my problem is? 

View 1 Replies View Related

DateAdd Expression Works In Tsql But Doesn't Work In Ssis

May 9, 2007

Hi There,

I am trying to set a variable with this default value using expression. This works in tsql but doesn't in ssis. Can anybody tell me what is wrong with this?



dateadd("dd", -1, datediff("dd", 0, getdate()))



Thanks.

View 8 Replies View Related

Works Fine In Designer But When I Load The Report It Doesn't Work

Oct 23, 2006

works fine in designer but when i load the report services
I get the following error
anybody know what to do
there is one subreport with this report
maybe the passing value but what could be wrong ????

Item has already been added. Key in dictionary: '9' Key being added: '9'

View 2 Replies View Related

Windows App Form Works: Datagrid Doesn't 'login Failed' ..tutors Out There?

Sep 11, 2005

Anyone live in seattle (meet on cap hill)? I have been stuck for weeks now and can't wait any longer wasting time - i will pay someone to set me up correctly quickly. I doubt this will be resolved online, but here goes... I need a datagrid to bring up simple database info (northwind) instead of showing the error 'login failed for mycomputeraspnet'. I am using windows authentication and my string is connectionstring = datasource=(local)\netsdk;initial catalog=Northwind;integrated security=sspi; persistent security=false;, I have seen online they say alter the authorization in the app virtual directory-- is that the C/inetpub/wwwroot or the web config of my project? I did so in the web config of my project, and also I added the impersonate=true to same already. I shared all the folders and made sure they are not read-only. I am flabbergasted.
Paul
XP pro 2004 sp 2
vis studio 2002 w updates
C# Asp web app project

View 2 Replies View Related

Debug (step Into) Sql Stored Proc From Managed Code

Aug 22, 2004

I am trying to debug sql2000 sp from managed code app with VS.Net 2003 archetect Ed..
It did not stop at the break point within the sql sp.
I did granted execute permission for sp_sdidebug.
Do I need to attach any process?

Is there anything left off by the article?
I referenced msdn article option 2: http://support.microsoft.com/default.aspx?kbid=316549

Thanks.

View 3 Replies View Related

Not Able To 'Step Into' The Procedure Code In SQL Debugger From Client Machine.

Jul 25, 2003

Hi,

I am working on SQL-Server 2000 (developer edition) with SP3 on Win 2000 and Clients are Win98/Win XP.

I am not able to 'Step Into' my SQL Procedure code in Debug mode, executed from Query Analyzer from a client machine. As soon as I select the 'Execute' button after inserting all the parameters value, the whole procedure gets executed. But I'm able to do the same (i.e 'step into') from the Server itself.

Do I need any additional configuration settings in the client machine ??

I shall be greatful if anyone can help me to solve the above problem.

Thanx in advance.

Surajit

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved