My Db Grew 8.2GB In Two Weeks BUT Only 4MB Of Data Added
Jul 23, 2005
I have a db that grew 8.2GB in one week and don't understand why.
There are three tables added to the db daily. I calculated the
spaceused by each of the three tables for a period of two weeks. The
tatal amount of data added to the db for the three daily tables over
the past two weeks was about 4MB yet the db grew approximately 8.2GB.
WHY?
Can someone please tell me what I should look at so that I can
understand what is going on?
hi, I am trying to group my data into weeks in a month. I am using : GROUP BY DateAdd(day, -1 * datepart(dw, convert(char(10),date1,23)), convert(char(10),date1,23))
Which works ok, but my first day is the monday of each week. Do you know how I can group by weeks, where dates run from monday to sunday ? So IN march I would have
week begin 3/3 week begin 10/3 week begin 17/3 week begin 24/3 week begin 31/3
But for the last day I only want to count the 31st, not the entire week. Same goes for the beginning of the month, eg for april, I want it to show as week beginning 31st march but I only count aprils data.
I am trying to design a graph to shows out build status for past 7-8 weeks. I have to write the SQL query first.
After spending a good chunk of time, I could get some basic chart going. Problem is that I could give it a starting time till now (static) but I am not sure how to get the results for past 7-8 wekks.
1) What is a good approach for this since time is not static and it is changing.
any example or piece of sql syntax is greately appreciated.
hi friends, I m new to asp.net... actually i have an application where the data for current week needs to be displayed from all the data present in different weeks.actually i want to retrieve the syllabus of current week from all weeks i used the below query but itz not working sqlString = "SELECT DATEPART(ww,sylWeeKID)AS Week FROM SylWeeks WHERE SyllabusIDFK= " & SylId & " GROUP BY DATEPART(ww,sylWeeKID) " ..can anyone suggest me how to retrieve data for current week , for a related item thanks in advance i need urgent help.
I'm trying to develop a custom Data Flow Transformization component in SSIS.
I compiled it without errors, installed it in the GAC and in the Pipeline Components-folder however I always get the following message when I'm trying to drag the component onto the designer surface:
The component could not be added to the Data Flow task. Please verify that this component is properly installed.
The data flow object "RisikoKennzahlenKomponenten.MarktwertTransformation, RisikoKennzahlenKomponenten, Version=1.0.0.0, Culture=neutral, PublicKeyToken=cfa8722b8086ac2d" is not installed correctly on this computer. (Microsoft.DataTransformationServices.Design)
Program Location:
at Microsoft.DataTransformationServices.Design.DtsBasePackageDesigner.GetPipelineInfo(String creationName, IServiceProvider serviceProvider) at Microsoft.DataTransformationServices.Design.DesignUtils.GetNewPipelineComponentObjectName(IDTSComponentMetaDataCollection90 parentCollection, String clsid, IDTSComponentMetaData90 componentMetadata, PipelineComponentInfo& pipelineComponentInfo) at Microsoft.DataTransformationServices.Design.PipelineTaskDesigner.AddNewComponent(String clsid, Boolean throwOnError)
This happens with EVERY custom component on my computer. The same components work fine on other machines.
I have a small three server development environment where I am getting my feet wet with replication. I have set up peer-to-peer transactional replication and it works fine for data added to the publication's table after the publication was created. However, rows in the table that existed prior to the publication's creation have never replicated. If any of the "old" rows are edited they cause an error on the subscribing servers when the replicator attempts to apply updates to rows that do not exist.
How can I get the old rows that predate the publication to replicate?
When I execute this, it works ok but only one the first character of the request.form["d"] is stored to the db.I checked the sproc with another routine and it adds full data, and I've verified that value of request.form["d"] is longer than one chaacter by printing it to the page. Anyone got any ideas why only the first char is getting added to the db?? SqlConnection SqlConnection1 = new SqlConnection(ConfigurationManager.ConnectionStrings["ConnectionString1"].ConnectionString); SqlCommand SqlCommand1 = new SqlCommand("addRoute", SqlConnection1); SqlCommand1.CommandType = CommandType.StoredProcedure; SqlParameter SqlParameter1 = SqlCommand1.Parameters.Add("@ReturnValue", SqlDbType.Int); SqlParameter1.Direction = ParameterDirection.ReturnValue; SqlCommand1.Parameters.Add("@xmlData", Request.Form["d"]); SqlConnection1.Open(); SqlCommand1.ExecuteNonQuery(); Response.Write(SqlCommand1.Parameters["@ReturnValue"].Value); //Response.Write(Request.Form["d"]);
Im trying to get out all peoples names whos birthdays are coming up in the next 2 weeks, can anyone tell me why this : SELECT FullNameFROM UsersWHERE (CONVERT(datetime, DOBMonth + '/' + DOBDay + '/' + DOBYear) >= DATEADD(dd, -14, GETDATE())) AND (CONVERT(datetime, DOBMonth + '/' + DOBDay + '/' + DOBYear) <= DATEADD(day, 0, GETDATE()))returns nothing when I know theres a few birthdays that should be returned. Thanks Si!
I need to find out all the weeks in a year, then for each week work out the numbers of records entered into the table that week that fit a certain criteria, and then report back the dates involved and the amount of records that were counted! Phew...
Basically I'm trying to find the week in a year(s) that had the most records entered into the table during that week...
And I'm stuck, I've got it working with individual dates but is it possible to group those dates into weeks???
hey all i am trying to get a filter in a report that return the last 14 complete weeks. so sunday through to Monday but only display this week once it's comlete next week. i have this FTDW.dbo.day.sql_date < dateadd(w,-1,getdate()) and FTDW.dbo.day.sql_date > dateadd(w,-15,getdate()) but i get incomplete week 3 and last week. any ideas?
I'm trying to find a simple way to see if a date in a week. I would like to try something like this, but haven't gotten it to work yet:
case when snapshot_date in (datepart(week,getdate())) then 'yes' else 'no' end as week1, case when snapshot_date in (datepart(week,getdate())-1) then 'yes' else 'no' end as week2
What am I doing wrong and how would I correctly go about this?
SQL Server 2000 SP3Hi,How can I get the cumulative weeks from a givedate to the currentdate. I know I can get the weeknumber by using datepart(wk,getdate())but this will giveme the week number for this year. What if I want to know the number ofweeksthat have passed since june 1 2001. If I use datepart(wk,'20010106') Iwillget the week number for 2001 but I would like the number of weeksexpired between then now.Thanks,Reg
I have a problem with datepart. I want to obtain the week from one date. I have seen the documentation about datepart and the problem with the week counter but I have still problems.
For example.
I want to get the week from this date 29 Dec 2003. This week with DATEFIRST=1 must be the first of 2004 (datepart(ww,'12/29/2003')) but the system give me the 53 week from 2003
the first day of 2004 is on the same week an this function give me different results.
I should check that the the number weeks of work for the five names is the same for all... that is, there can not be a person who works more or less of other...
I create a table `tbl_dates` where the primary key is the date and another field used for the holiday.
How do distribute equally these five names for the working weeks in the year?
i have 3 tables, each with a date(it has daily dates) column(column name is same in all tables) Each table has columns say "value1","value2", "value3"
i want data from all these tables together.such that my first column will have data weeks and other 3 columns count1,count2,count3 will have average of next 4 weeks count..placed infront of week.
Hello, I am tring to add a string my database. Info is added, but it is the name of the string, not the data contained within. What am I doing wrong? The text "Company" and "currentUserID" is showing up in my database, but I need the info contained within the string. All help is appreciated!
Imports System.Data Imports System.Data.Common Imports System.Data.SqlClientPartial Class _DefaultInherits System.Web.UI.Page
Protected Sub CreateUserWizard1_CreatedUser(ByVal sender As Object, ByVal e As System.EventArgs) Handles CreateUserWizard1.CreatedUser 'Database ConnectionDim con As New SqlConnection("Data Source = .SQLExpress;integrated security=true;attachdbfilename=|DataDirectory|ASPNETDB.mdf;user instance=true") 'First Command DataDim Company As String = ((CType(CreateUserWizard1.CreateUserStep.ContentTemplateContainer.FindControl("Company"), TextBox)).Text) Dim insertSQL1 As StringDim currentUserID As String = ((CType(CreateUserWizard1.CreateUserStep.ContentTemplateContainer.FindControl("UserName"), TextBox)).Text) insertSQL1 = "INSERT INTO Company (CompanyName, UserID) VALUES ('Company', 'currentUserID')"Dim cmd1 As New SqlCommand(insertSQL1, con) '2nd Command Data Dim selectSQL As String selectSQL = "SELECT companyKey FROM Company WHERE UserID = 'currentUserID'"Dim cmd2 As New SqlCommand(selectSQL, con) Dim reader As SqlDataReader '3rd Command Data Dim insertSQL2 As String insertSQL2 = "INSERT INTO Company_Membership (CompanyKey, UserID) VALUES ('CompanyKey', 'currentUserID')"Dim cmd3 As New SqlCommand(insertSQL2, con) 'First CommandDim added As Integer = 0 Try con.Open() added = cmd1.ExecuteNonQuery() lblResults.Text = added.ToString() & " records inserted."Catch err As Exception lblResults.Text = "Error inserting record." lblResults.Text &= err.Message Finally con.Close() End Try '2nd Command Try con.Open() reader = cmd2.ExecuteReader()Do While reader.Read() Dim CompanyKey = reader("CompanyKey").ToString() Loop reader.Close()Catch err As Exception lbl1Results.Text = "Error selecting record." lbl1Results.Text &= err.Message Finally con.Close() End Try '3rd Command Try con.Open() added = cmd3.ExecuteNonQuery() lbl2Results.Text = added.ToString() & " records inserted."Catch err As Exception lbl2Results.Text = "Error inserting record." lbl2Results.Text &= err.Message Finally con.Close()End Try
My table is test and I have an ID and DateTest columns
I would like to count the weeks with more then one record.
So far I got this and return the weeks with 1 record per week. How can I count the weeks with more then one record
select sum(c) from ( select c = count( id) over (partition by id, datepart(week, DateTest)) from test where id = '1' and DateTest >= '7-7-2015' ) a where c = 1
Hi, i've this phenomenon that my SQL SERVER 2005 SP2 Build 3042 (W2K3 STD SP2) stop responding to connections. when i make stop and start to the sql server service it's back to life. when i observer the windows event log and sql events i see those errors
from windows eventvs
AppDomain 24 (system.dbo[runtime].24) is marked for unload due to memory pressure.
AppDomain 24 (system.dbo[runtime].24) unloaded.
SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 10.165.2.173]
from SQL events
SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 10.165.2.173]
Could not connect because the maximum number of '1' dedicated administrator connections already exists. Before a new connection can be made, the existing dedicated administrator connection must be dropped, either by logging off or ending the process. [CLIENT: 127.0.0.1]
SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: <local machine>]
I need to create a week calendar from date in SQL 2012. Week date starts with Sunday regardless if first Sunday or last Sunday overlaps with previous or next month. For example, the first week in Sep 2015 starts on Sunday 8/30/2015 and ends in 9/5/2015. Too, the last week of Sep 2015 starts on 9/27/2015 and ends on 10/3/2015. Here is the final format:
I require some scripting to return data which sits in a rolling weeks date range of the current week.
For example, on a Monday I want to return data from the previous day (Sunday to the previous Monday). On a Tuesday I want to return data from the previous day (Monday to the up coming Sunday). On a Wednesday I want to return data from the Monday (previous 2 days ago to the upcoming Sunday) On a Thursday I want to return data from the Monday (previous 3 days ago to the upcoming Sunday)
And so forth.
So I have my SQL script which works with static, fixed date ranges. But I need this additional dynamic date range logic built in.
Hi, Is there a way to write a stored procedure to get weekly report for 5 weeks?I currently use a stored procedure with 5 select statement to get the result for each week, but I was wondering it there is a way to do that with only one statementthanks
My requirements are to return the sales for each customer for each store, for the past 6 weeks.
The catch is that I only want those customers which have had sales over 10,000 within the last week.
This is my query:
WITH SET [CustomerList] AS FILTER( ([Store].[Store Name].[Store Name], [Customer].[Customer Name].[Customer Name]), [Measures].[Sales] >= 10000 AND [Date].[Fiscal Week Name].&[2015-01-26 to 2015-02-01]
Hi! could you please check my code on adding record on my DB.. Im using SQL Server included on VWD.Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click Dim con As String = "Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Request.mdf;Integrated Security=True;User Instance=True" Dim sqlcon As New Data.SqlClient.SqlConnection(con) Dim sqlcmd As New Data.SqlClient.SqlCommand("Insert into uRequest (eticket, ename, edept, edetails, ejobpend, edate) values (@eticket,@ename,@edept,@edetails,@jobpend,@edate)") sqlcon.Open() sqlcmd.Parameters.Add("@eticket", Data.SqlDbType.Char, 10).Value = "11-0010-06" sqlcmd.Parameters.Add("@ename", Data.SqlDbType.Char, 100).Value = User.Identity.Name sqlcmd.Parameters.Add("@edept", Data.SqlDbType.Char, 50).Value = DropDownList1.Text sqlcmd.Parameters.Add("@edate", Data.SqlDbType.DateTime).Value = Date.Now sqlcmd.Parameters.Add("@edetails", Data.SqlDbType.Text).Value = TextBox1.Text sqlcmd.Parameters.Add("@ejobpend", Data.SqlDbType.Text).Value = TextBox2.Text sqlcon.Close() End Sub I've check the Data on my DB but nothing has been added. nwy, how can u create a confirmation message if the record has been successfully added.Thanks and sorry for the trouble.
Not 100% sure how to do this so I would appreciate some directions. I have 2 tables, Systems and Contacts. A system can have 1 to infinite contacts and contact can have 1 to infinite systems. So I use a 3rd table Sys_Con to add the contact needed for each system. Now my question is once I add the System and contact how do I know for sure which ContactID to add in my Sys_Con table? Because while I am doing this operation maybe someone can add an other contact. So is there a way for my store proc Add_Contact to return the contactID needed for my store proc Add_Sys_Con ?
TABLE Sys_Con SystemID int ContactID int
Table Contact ContactID int Identity ContactName ...
hi i have a question how can i delete last added row. I have 2 tables .source and destination . I take a 1 row from source table , do someoperation on it and save to destination table . after succesfull written Iwant to delete added row from source table.. i'm using a coursors. the mainproblem is : is there any function to check which row was last added. Now Iam doing it using select * from destionation where (and necessaryconditions). but if destination table will be 100000000 rows for example ittakes too much time... Is there another possibility to do it ???please helpMarcin Wolkuwolku
In developing a VWDE project I added 2 columns to the User table in the ASPNETDB.mdf database. I can see the columns in the Data Definition and I can see the values I added when I Show Table Data but I cannot access them with a SQLDataSource control? The SQLDataSource shows all of the columns in that table except the ones I added. Any suggestions? Thanks.
