For both OLEDB destiantions (and hopefully for the forthcoming ADO.NET destination adapter) it would be useful to have the following two output columns: NativeErrorCode and NativeErrorMessage.
For SQL Server, this would allow you distiguish between multiple errors which all roll up to the SSIS error "the value violated the integrity constraints of the column", which is way too generic for proper decision making (via conditional split).
For example, like SQL Server replication, you should be able to ignore duplicate key errors (error number 2627) indicating the record existed, but error out on nullability constraint errors (number 515) in which the record could not be inserted. If you had a native error code, you could make this decision, while the SSIS error for two different native errors is precisely the same.
There is a known and accepted race condition between a lookup transform and subsequent OLEDB dest insert attempt (assuming a non-transacted container and a common component target table), which is why the 2627 can be safely ignored in certain instances, while a 515 should not be.
I got an error when i do an OLE db Source pointing to an sql 2000 database and executing a sql query inside the OLE Source. The ole source will point to an OLE DB destination which is an sql 2005 database.
But i got the below error:
Error at Data Flow Task [OLE DB Destination [245]]: the column firstname cannot be processed because more than one code page (936 and 1252) are specified for it.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB destination" (245)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow TaSK: There were errors during task validation.
Hi, I'm storing errorcode and errorcolumn values in a separate table called errorrows, I am using the standard ssis add-on reporting package including the logging database.
When using the OLE DB destination adapter I would like to log the error message (reason). These kind of messages are OLE DB specific and won't be logged in my standard logging (error rows and package logging).
Is it possible to catch the ole DB error message so I'm able to log it?
I am using a foreach loop, with the data from an ado recordset, which contains the table name that I wish to write data to an OLEDB data dest. The table names are retrieved from an execute sql task in the an object var. Within the foreach loop, for each table name, I then use a datareader to an ado.net source to pull data from that table, via an expression construct into a variable - i.e. "select * from " + @[User::table_name]. This works fine for the first table, in which mappings are setup using the SSIS design environment. The data is retrieved. I then use a variable and set the data access mode for the oledb destination to "Table name or view name variable". This also saves data fine for the first table in the loop in the oledb dest. When the next table name is retrieved from the ado provider in the foreach loop, the datareader fails, as it still thinks the metadata mappings are from the first table, which was used for the mapping in the design environment. I.E. FIN_CLASS is a column from the first table in the loop.
Error: 0xC0202005 at Data Flow Task, DataReader Source [7181]: Column "FIN_CLASS" cannot be found at the datasource.
I have set the following properties, that I thought (in my feeble mind), are supposed to avoid that behavior. For the datareader, I set ValidateExternalMetadata to false, and for the data flow task (container for the datareader), I set DelayValidation to true. These settings, according to the doc, are supposed to evaluate metadata for the datareader source at runtime (not design time), so that the column metadata is dynamic, and so that the subsequent oledb destination can use the "data access mode" for the oledb destination of "Table name or view name variable".
If I cannot get this to work, I have 2 options: Use OPENQUERY via dynamic t-sql statements, OR create 30 separate flows in SSIS - one for each table - not looking forward to that one.
Good day, I'm working with SSIS on SQL Server 2005 and trying to update a table with a OLEDB Destination. The table I'm updating does not accept Null values. I've tried to update the table in several ways.
Using a "Table or view - Fast Load " Data Access Mode. I get the can't load data due to "Null values are not accepted in field xyz"
Using SQL Command text. Used the isnull function on all null fields and the "Failure inserting into the Read Only Column xyz"
I've check the properties of the table I'm writing to. I've check my user credentials.
Can any of you shed some light on what I'm missing.
I have a SSIS package that reads data from a dump table, runs a custom script that takes date data and converts it to the correct format or nulls and formats amt fields to currency, then inserts it to a new table. The new table redirects insert errors. This process worked fine until about 3 weeks ago. I am processing just under 6 million rows, with 460,000 or so insert errors that did give error column and code.
Now, I am getting 1.5 million errors. and nothing has changed, to my knowledge. I receive the following information.
Error Code -1071607685 Error Column 0 Error Desc No status is available.
The only thing I can find for the above error code is
DTS_E_OLEDBDESTINATIONADAPTERSTATIC_UNAVAILABLE
To add to the confusion, I can not see any errors in the data written to the error table. It appears that after a certain point is reached in the processing, everything, or most records, error out.
I have a Data Flow task which uses an XML File Source with six parellell Outputs, each going firstly to a Data Conversion Task, then the results of each end in a SQL Server Destination Object. (All using the SQL Native Client)
To eplain this further, the Xml file contains 6 different types of elements, the Dataflow splits out each type of element and processes them into different tables. The Data Transformation object exists only because the XML fields are Uni-code and the table fields are VarChar not nVarChar.
Initially using this setup I found that the Connection would timeout using the SQL Native Client so I changed the Timout on the Destination Objects to 0. This fixed the problem to some degree, however at present I can run the Pakage using the Visual Studio enviroment and everything works fine, no problem. When I run the Dtsx file using the SQL Server Agent, I end up getting the error below...
Error: 2007-12-14 14:33:19.16 Code: 0xC0202009 Source: Import XML File to SQL SQL - CP [2746] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from
I understand that this error is somewhat of a 'catch all' and that the way the Native SQL Server Connection object works makes Error Capturing difficult. I have tried a few things which I will list as I'm sure they will be suggested...
I have played around with the 'MaxInsertCommitSize' property of the SQL Server Destination Objects to no avail (IE, changing to 50000, 10000, 1000 all of which resulted in the same problem)
I am running the ssis pakage from the server which is the destination
As mentioned above the Timeout on the SQL Server Destination Objects is set to 0
What I have already mentioned and still don'tt quite understand is that I can run the job successfully from the Visual Studio enviroment but as a job run off the SQL Server it fails...
Trying to do a update/insert from SQL 2005 query to Access 2003 linked table.
In the Script Transformation I get this error.
Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.OleDb.OleDbConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface.
Destinatoin Oledb connection is Native OLEDB Jet 4 to Access 2003 database.
Private sqlConn As OleDb.OleDbConnection
Private sqlCmd As OleDb.OleDbCommand
Private sqlParam As OleDb.OleDbParameter
Private connstring As String
Public Overrides Sub AcquireConnections(ByVal Transaction As Object)
I experienced this problems on both Windows Mobile 2003 SE and Windows Mobile 5.0.
Its native development (c++, oledb, atl and mfc).
It's quite simple to reproduce...
1. open a database
2. open a rowset on table A (whatever, valid of course and with both IOpenRowset and ICommandText), read datas and close rowset
3. power off
4. power on
5. try step 2 with another table (failed on openrowset with error 0x80004005) or try table A (sometimes working because of cached memory, sometims failed on Read Datas).
6. being stuck ;-)
Our work-around was, in case we loose our connection (identified by error 0x80004005 on openrowset), we close it and re-open database... ugly for sure, but working.
What I'm looking now is to use some kind of "detection method" like what people in .Net develoment are using "if ConnectionState.Open <> ...) for reopening my database only on demand...
We want to take advantage of the performance benefit provided by SQL server destination in our packages. We are using a configuration variable to specify whether the SQL Server is remote or local to the packages. We are using a conditional split to redirect the process to either SQL Server destination or OLEDB destination based on the value of the variable. Is there any performance benefit in doing such a thing as it seems that the connection is made in both the paths during the runtime instead of in one particular path alone.
I am a beginner for the SSIS and would like to know how to modify the OLDEB Destination connectionString property at run time like using "for each loop container".
My requirement is that I have a single source which would be Sql Server 2005 and my destination is in MS-Access database residing in 100 places. I do not want to manually design in the data flow to these 100 destinations.
I have all the destinations stored in a table and would like to pick these destinations from the table and loop through the same at run time by modifying destination connection string.
I have planned using dts but the for each loop container does not work through as it works with flat file connection manager , but does not go well with OLDEB connection.
I have a package with an execute SQL task that truncates the destination table as the first step in the control flow and a data flow task that reads data from a flat file and loads a sql server table.
Once in a while the package bombs because it cannot get access to the flat file. The end result is that the table is empty because the truncate runs first. Obviously, I need to address the file contention, but I was wondering how to address this issue in general since anything that causes the data flow to blow up would leave the table empty.
I would rather have the table with day old data than empty, since it is not mission critical and the users can at least look at yesterday's data as opposed to nothing.
Question
Is there a way to specify a "load replace" on the OLEDB destination? I haven't seen one and I guess it makes sense because the data flow task transformations run row by row.
The only solution that I have come up with is to have the following on the control flow:
1) data flow task which reads flat file and loads a temp table
2) execute sql task to truncate the "real" destination
3) data flow task to move data from temp table to real table.
Anyone else come up with a better way to handle this?
How can commit interval for OLE DB destination be set when the data access mode is not "fast load".
What happens in oledb destination in case of a failure in package? How does the roll back happens. I mean how is the commit point set in oledb destination? I know about the transaction options which are at the package level.
I have a strange problem, which I never encountered earlier, I have a data flow which has one source and multiple destinations, I am also using multicast and derived column transformations too, however when I run the package (either from cmd line or designer) the data flow task hangs when it comes to inserting data into the target tables. and it keeps waiting forever. Initialy I thought it was my data set , however if with very few records the problem persists. I have also tried removing the table lock from the destination , increasing the rows per batch to 10000 and commit size to 10000 but to no change. I am using the fast load option within my destination. When I run sp_who2 on my Management Studio I see that the status of all the processes is sleeping and the command is "awaiting command" , any help appreciated.
Overview of my scenario: i have an SQL table with 10 columns. I read data off a csv flat file source and insert / update them into the sql. No problems there.
Now, after the 10th column, the columns are variable from site to site. Ie, for any customer, the first 10 columns are the same but the following 'n' number of columns can be different.
I'm already able to detect what are the 'custom' columns from the source db and can programmatically add / modify the columns to the destination sql tables when SSIS runs.
My problem now is, i have the flat file source with 'fixed' and 'custom' columns together, and my sql table is ready to receive them, but i don't have the proper column mappings in my SSIS package. I only have mappings for the 'fixed' columns.
How can i programmatically 'add' these mappings to my data source and subsequently my oledb destination?
What strategy should i use? Open for anyone's suggestions or ideas.
I have a simple loading to excel destination. It has 900,000 records. In 66,000+ records, i has an error
Error: 0xC0202009 at Data Flow Task, Excel Destination [3286]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at Data Flow Task, Excel Destination [3286]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Excel Destination Input" (3297)" failed because error code 0xC020907B occurred, and the error row disposition on "input "Excel Destination Input" (3297)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Excel Destination" (3286) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC02020C4 at Data Flow Task, OLE DB Source [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
I assume that this is caused by the no. of records im loading since the .xls file can only contain 65,000 records.... i tried using the .xlsx file but i guess it only accepts .xls.
What's the alternative to load to excel 2005 with this numbers of records?
I have a dataflow in my SSIS Package that is supposed to transfer over all the rows from a SQL server table. I am selecting columns from the SQL table and there is a total of 1603 rows. I am only getting 354 rows in the DB2 destination table. I have turned on SQL logging and specifically the BufferSizeTuning option for this dataflow. in the Sysdtslog90 table I see messages about the "Rows in buffer type 0 would cause a buffer size greater than the configured maximum. There will only be 1249 rows in buffers of this type" and "Rows in buffer type 3 would cause a buffer size greater than the configured maximum. There will only be 1251 rows in buffers of this type"
I have the following set in the Dataflow properties. DefaultMaxBufferRows = 5000 DefaultBufferSize = 10485760
The server is windows server 2003 x64, SQL Server 2005 sp1 resides on this server where the SSIS packages are running also. 12gb of ram.
Any suggestions how i can get all the rows transferred, what is Buffer Type 0 and 3? this doesnt seem like a lot of rows (1603 total) to hit a DB2 destination with.
Any settings I would need to check in the Connection Manager? I am using Native OLE DBMicrosoft OLE DB Provider for DB2.
i am trying to load almost 15 csv files to my oledb destination can i use for each container to map the source columns dynamically to destination table during data flow task
I have a Dataflow task with oledb source that is using SqlCommand to retrieve data and oledb destination to write the source output to a table. I have access to both the source and destination databases.
The problem is the destination component is not writing any rows to the destination table eventhough the Source component is returning rows (I can see them in the Preview and the source database table as well). I'm using "Table/View Name from Variable" for destination.
The Package executes without any errors but there is no output.
As soon as I call the input.GetVirtualInput(); method I get a com exception ,Seem that I am missing a
VirtualInputColumnCollection on the component ,but can't seem to figure out why.
When I drop the all the other components and only keep the OLEDb Source and OLEDB Destination with a flow between them , the call to input.GetVirtualInput() doe not fail with a com exception and I can mapping normally
I have a made a simple mapping connecting source and destination on SQL server on local box. I am getting ~36K rows/min as the thru put. I only want to use ole db destination data access mode as SQL query (dnt want to use fast load).
I am doing this test in order to set a bench mark for a custom component which i have developed. With this result i can figure out how much time my custom component is taking.
Experts, please let me know your views on the thru put which i am getting is it good bad or ok with the scenario i am testing and also if there are some ways to improve it.
I've searched around and can't find any references to the problem I'm having. I'd appreciate any ideas or input.
I'm trying to use the OLEDB Destination for an insert at the end of a long data flow. I need to parameterize the input, and for some of the columns I need to use literal values instead of parameters. It seems like this should be the most common thing in the world, but I'm at a loss to get it to work.
I type in the SQL statement just like I would with an OLEDB Command transformation, with the ? character for the appropriate columns in the VALUES clause. However, when I try to use Parse Query I get this error:
"Parameter Information cannot be derived from SQL statements. Set parameter information before preparing command."
OK, so I start searching around for ways to set the parameter information. Nada. On the Mappings tab the parameter list is empty. I check MSDN and it says this:
"If you have entered a parameterized query by using ? as a parameter placeholder in the query text, use the Set Query Parameters dialog box to map query input parameters to package variables."
Set Query Parameters dialog box? I don't see this anywhere. What am I missing?
The options with the SQL Server Destination seem even more limited, as I don't see any way to use a SQL statement or stored procedure.
For the moment I'm going to stub this off with an OLEDB Command transformation with a downstream Trash desintation, but hopefully that's only going to be temporary.
My OLE DB Source is getting data from the following column types:
ID varchar(50), Name varchar(100), Date datetime, Currency char(3), Cost numeric(30,10)
My OLE DB Source outputs my information in the following order when I click Preview:
ID Name Date Currency Cost
When I connect the OLE DB Sorce to a Flat File Destination, it comes out in the wrong order.When I examine the "line" between them (Data Flow Path Editor) I get:
Currency DT_STR Length: 3
ID DT_STR Lenght: 50
Name DT_STR Lenght: 100
Date DT_DBTIMESTAMP
Cost DT_NUMERIC
What is the easiest way for me to change this so the Flat File Destination will output my data in the same order as the OLE DB Source:
I have an OLE-DB Command transformation that inserts a row. If the insert SQL command fails for some reason, I use the "Redirect Row" option to send the row to a script component. Inthere, I get the error description into a string variable in order to log the error into an error table.
For example, if a primary key violation arises, I would like the error description to be "The data value violates integrity constraints". I get it using the ComponentMetadata.GetErrorDescription. When I use the "table or view mode", I get the error description above without any problem. But If I use the "table or view fast load", the description is something like "No status available". But, If I use the error output to fail the component, in the OnError, I get the right error description. Is there a way to have both behaviour, I mean, to be able to redirect error rows to an output and have the cotrrect error description (like the one in OnError event handler) using fast load mode?
Inside a data flow task, i have a oledb source and destination. In my situation, I need to pull data from a table in the source, but also hard code some columns myself, which means my source is a blend of data from table, hard coded data, which will then have to be mapped to columns in oledb destination. Does anyone which option to choose in the oledb source dropdown for the data access mode. Keep in mind, i do need to run a a select query, as well as get data from a table. Is it possible to use multiple oledb sources and connect to one destination, because that is really what intend to do here. I am not sure how it will work, or even if its possible. Basically my source access mode needs to be a blend of sql command and table columns, how would that be implemented? Any help or advice is appreciated.
i am performing the ETL on the as400 db2 database using ms- dts,ssis.
i have built the connection b/w as400 and source to extract data from as400 to staging means in dataflow . when i have built the oledb connction for loading data to destination as oledb destination.then it will connct successfully to the db2 as destination but when execute the task then it not load data , and give provider error.
I have requirement to update/insert the DPID based on the address which are passed as an input values.There are more than one address at the same time and I configured to get the address from the query which are correct and output of the address values will be stored as system object variable.I am then passing the system object variable to for each loop container and I have configured the collection and variable mappings as a variable for each input value.
when I pass the value manually to the web service task it works correctly.When I pass it as a variable to web service task it doesn't return any value.I have a data flow task which converts the ouput from web service task using the xml source converts it to oledb destination.I don't see any rows being written to the target table.
I have to combine data from DB2 and SQL server and do some manipuation. I wanted to do union all and put in temp table for further manipulation. I created a temp table in control flow,Â
CREATE TABLE ##SiteTemp   (    LEVEL2 VARCHAR(20),    LEVEL3  VARCHAR(25)
Then I was trying to use that temp table for destination but I can do see that in destination. I have to automate the package and do that everyday. I read some blogs but did not understand how they did it. I did set retainsameconnection to true. I did find this thread but i did not understand how it was done. URL....
I have two OBL DB sources, Then I have Union ALL and then OLE Destination in data flow.I have the temp table code in Execute sql task.
I have a SSIS pkg that gets data from SQL and do data conversion and Insert into OLE db AS400 destination, There is a flag column in SQL table , that has to be updated to true, once the records are inserted in AS400 how do i do that in SSIS
SQL oledb ---------> dataConversion ---------------> AS400 OLE db Destination | update SQL table Flag column<---------------------------------|
Copy a full directory from source to destination (Done)
then for each file on the destination directory,it must process that file and insert rows on the table.
So I created a foreach loop, and created a varriable aclled CURRENTFILENAME, and assigned it into the foreachloop to index 0.
Inside the foreachloop I created a dataflow task, in the dataflow task I dragged a flat file source and an oledb destination, but I noticed that the flat file source requires flat file manager, and the flat file manager requires a unique FILE NAME. I cant put this c:copia*.txt.
I took a loot at flat file source properties and it has associated the flat file manager, but I can not assign the filename to the variable from the foreach.
