I have a matrix report, which has one row group and one column group. The value is a Count of some field coming from the dataset. So the difficulties that I'm having is that when I click on zero(i.e. 0) values from the main report, the detail report doesn't ran and it through an error message : The 'X' parameter is missing a value. When the value is positive(other than zero) then the detail report works fine.
Now, it's easy enough to make the values clickable so that somebody can drill down to a report that shows detail about the people. I have also discovered how to turn off clickability on the totals. However, what I really want is for the totals to be clickable so that, for example, if I click on the 63, I see a report that shows all men. Likewise, If I click on the 48, I want to see a report that shows all Full Professors. What currently happens when the totals are clickable is that if I click on the 63, I get all men who are full professors (36 records instead of 63). If I click on the 48, I get all Full Professors who are men. (36 records instead of 48).
Is there any way to send different parameters (or even no parameters) to the secondary report if the subtotals are clicked instead of the regular results?
I am somewhat new to SRS. I am creatnig a report containing a Matrix. I did this because there are one or more columns included in the data set. I would like to add totals to both the rows and columns.
Here is data samples of the matrix: Columns: C1, C2, C3... Rows: R1, R2, R3, ... There is a total making up the data section and looks like this (I will just use Valx for the value in the data section):
C1 C2 C3 .... R1 Val1 Val2 Val3
R2 Val4 Val5 Val6 R3 Val7... .... . . .
I would like to total each column and have a summary at the bottom (for the C1 this would contain Val1+Val4+Val7) and also like to have an extra column containing totals for each row (for the R1 this would contain Val1+Val2+Val3...).
Is there a way to do this? Am I missing something obvious?
Thank you for any help, it is very apprecaited. Eric
I have an issue in a group for a Matrix report I have created. Currently if a field in a table has null values in it, the grouping does not show in the matrix. Is there a way to force a group to show if there are Null values? I figure there must be a property to toggle on/off that would take care of this but I cannot seem to find it.
I have a matrix which looks as follows: ----- Actuals | Budget ItemA 20 | 50 ItemB 45 | 30 ItemC 20 | 15
I would like to add a column with the difference between actuals and budget. Actuals/budget is 1 group in the matrix being the dimensionname. How can I calculate the difference (subtract actuals and budget), because if I just use the subtotal function it adds both totals together and I need to have the difference between them?
Hello Friends, I am generating a SSRS report in which I have created report using 3 matrix and each matrix is having three row groups and one column group. So in this report I am getting NULL values for few particular column groups. So i want to hide those null value. I have used expressions in the visibility option for that cell values and its hiding the values but its giving white spaces and the width o the matrix is not shrinking . Can anyone help me out in solving this issue?
The scenario is like this.
column group A B C D E F G H row group1 1 2 Null Null 7 8 10 12 row group2 2 3 null null 8 2 3 3 row group3 5 4 null null 9 3 3 3
So I want to hide these null valued cells. By using the visibility option its hiding it but for COLUMN C & D its giving blankspace and then values for other columns,its not shrinking the NULL cells.
I am using matrix to make a report. I have company name in the row group and user name in the details field. When I run the report I only see the company name once and each user of that company is displayed in a separate row. Then next company name and its users... I wanted to know if there is a way to display company name next to the user name? I know it can be done by using "table" but I can't use table because in this report there are other fields can only be done in a matrix. So, please let me know if there are any settings in matrix which I can use to display my company name next to each user of that company. Please ask me any thing if the question is not clear. Thanks a lot for the help.
Hello I have two matrices. One contains sales data for the current year, the other prior year. Both matrices use different data sets
I'd like to compare the two - possibly by creating a third matrix that subtracts prior year from current year.
Any ideas? When I create a third matrix and substitute a formula like =sum(values, "Data source for matrix 1") - sum(values, "Data source for matrix 2"), the resultant matrix subtracts the grand total from the first matrix - not the individual "cell".
I am newbie to reporting services and I need some help. Could any one please let me know how to replace Null value with 0 in the data section of the Matrix. I don't want blanks to be displayed on the report, I want those to be replaced with 0's.
Does anybody knows how to reference a value inside a group in a Matrix. I know it should be possible to use a calculated field, but I can't find a way to calculate a simple percentage!
example: (The Orders Group have "Received" and "Accepted" columns and these are created Dynamically, and I want to add a calculated field (ie. "%Accepted") to the group.
Simple Formula %Accepted = "Accepted" / "Received" i.e. %Accepted = 5/10 :. (50%)
I'm a real novice user and I we use SQL Server. I have a table called TableLog that has the 4 columns. The first column is repeated x number of times for each value in the second column. I'd like to see this information put into a matrix where I could tell if there are any missing intersections. In addition, I need to insert a WHERE clause that says "BETWEEN 20090000 AND 20100000" for the first and second columns.
What would be an equivalent expression for ISNULL(datafield, 0) for a table/matrix cell? I am using iif( Len().. to find out if there is something in the cell, and displaying zero in the cell if the length of cell item is 0, however am wondering if there is any better/elegant way of doing that?
I'm calculating matrix including totals in the database. I would like to set a background color for all total cells. For total cells with now dat in database I fail to put codiotional formating. I use the following code: =iif(Fields!Col1Desc.Value="Total", "#60759b", "Transparent") For cells under "Total" columns that do not got any db value I got color "Transparent" and not "#60759b"
How do I recognize to which column or row a cell belong in a matrix even if it not a value that come from db but empty one?
for example, note the background color of the cell of Male, Total and 2006
I'd like to create a report with the folloiwng format:
DATE1 DATE2 DATE3 DATE4 DATE5 [fixed 5 dates across the top, from today to T+5]
THING1 x x x x
THING2 x x x x
THING3 x x x x
THING4 x x x x
my raw data looks like this:
THING1, DATE1, TEXT VALUE 1
THING1, DATE2, TEXT VALUE 2
&c&c.
Now: there may be 0, 1 or several (by which I mean 2-5 max) text values to display at each intersection. If there are zero I'd like it to be blank, if there are one or several, i'd like to display them in a little list within the cell.
I am using SSRS 2014. I'm using a matrix instead of a tablix because it allows me to have dynamic columns. In the example I'm showing, two of the columns use the sum function to get the total counts per practice. The third column contains percentages so I averaged for the total but the value is inaccurate compared to the value I would get if the divided the the two totals that are sums of the counts. Is there a way for me to specify that I want to divide the total counts numerator divided by the total counts denominator?
Here's an example report output with the percentage column averaged (inaccurate):
PCP       numerator denominator percentage John Smith  66       104 63.46 Tom Jones   4         36   11.11 . . . Jane Doe    1   1     100 Total 708      1005     72.3
So the 72.3 value is from Avg(metricvalue)
I would like to do this instead: % total = 708/1005, which equals 70.5 - a significant difference.
The metricvalue column is what is the value for every number above (Because it's a matrix).
I am creating matrix report with grouping on WEEK and Fiscalyearweek,I need to calculate of difference between FY14W01,FY15W01 ande  percentage of those..how to calculate in ssrs level.
I have 2 higher level column groupings of month name and year above my actual date groups. It looks a little weird aligning them left but there is no guarantee that centering them will even allow them to show until I've scrolled right to the middle of the cell width that they occupy.
Is there a feature that comes with, or a well known trick for making them center in the area that is being viewed instead of the potentially very wide cell that they occupy?
i want to change the XXX with a value from the dataset. I tried - javascript:window.open('http:www.a.com?num= + Fields!ME.Value '); or - javascript:window.open('http:www.a.com?num= & Fields!ME.Value '); it didn't worked :(
I have created a one-page client summary report. My problem is that I can only get the report to show one client and there are many. How do I add record navigation functionality to my report?
I have a link on the header to jump to another report. It was working fine on test server but when deployed to production, is giving the followin error. Any suggestions Thanks
Inder
The path of the item "(null)" is not valid. The path must be less than 260 characters long and must start with slash. Other restrictions apply. (rsInvalidItemPath)
I got the following code to add a column in a matrix with a variance:
IIF(IsNothing(Previous(Sum(Fields!Amount.Value))) or Fields!year.Value=First(Fields!year.Value,"Category") or Previous(Sum(Fields!Amount.Value))=0,nothing, ( (Fields!Amount.Value) /Previous(sum(Fields!Amount.Value)) ) )
This code works fine, except that the first row of the matrix shows an #error
This happens with each matrix where I use this expression. A warning emerges:
rsruntimeerrorinexpression the value expression for the textrun Textbox43.Paragraphs[0].TextRuns[0]' contains an error.
Attempted to divide by zero.
The strange thing is that the part
Fields!year.Value=First(Fields!year.Value,"Category") should prevent an error and I expect it to show 'nothing'
An screenshot of the table. (each color is a different category. Each row stands for 2013, 2014, 2015)
As you can see, all other 2013 rows show a blank cell, except the first row.
I have a Matrix table that expands to the right when choosing an amount of months to be shown. Under this matrix I have to Charts. The two charts are situated together, that is no space between them, and to the left of the report.
Now, if I choose a lot of months, say three years the matrix diagram will be huge to the right. The problem I have is that the second diagram, the one on the right, moves to the right depending on how big the report gets, and this is not good at all. The two charts are supposed to be all the way to the left.
Hi all, I'm trying to design a website with my old MS Access Application as a template, because my users know that style. I use textboxes to display data from the MSSQL 2005 database, one record and 20 fields per page ....and i would like to navigate through the records with 4 buttons: first, last, next and prior, placed on the page.I tried a lot of things, and my last attemt was a Stored Procedure with a Cursor to do the trickbut.... it did not work It's very easy to do this in MS Access. Can anyone tell me a simple way to do this ?
Hi everyone I stumbled across this problem recently and have tried to figure out a good solution and have come up with nothing. Environment: ADO.NET, ASP.NET 2.0, MS SQL 2000, C# Problem: I have a set of data which I order according to two columns of data in the set. One column is a varchar or a date value (depending on what the user has chosen from GUI controls) and the other is an identity column. This dataset contains lots of data so its not feasible to pull the entire dataset to the client, also everything must be performed via ADO.net (no stored procedures). When the user selects one of the records I load another page and drill down into the record details (think of this as the record details page). This is fine and easy but on this record details page I would like to keep a Next and Previous button so users can move to the next record in the set (remember this set is sorted somehow on the previous page). My question is how can I know what next record should be? It would seem I need to attach a sequential number to the rows of data so I can easily grab the next one in the set. Solutions to this seem to make use of a temp table which I dont think is possible via ado.net. Is there a decent performing way to do this through ado.net? Thanks for all insight.
Can I have a report that is nothing more than a parameter and when the user selects from the list it will jump to another report based on which parameter was selected?
I can create a report with a text box that I can click to jump. I'd like to be able to eliminate the click on text box if possible and jump directly from parameter select pull down box.
I have a report with a Matrix table. When it€™s fully populated I have 5 rows. These rows are different categories in a CRM system. In these categories there are a lot of Opportunities listed. The thing here is that category 1-4 exist in one table, really a view, and category 5 exist in another different view. So to gather all the information into one single Matrix table to later have subtotals and stuff I just made a little Union of the two select queries.
Now one the column in the table is of course Topic. And from here my client wants to be linked to the right CRM card. The problem I have encountered is that how can I have to different addresses on one single cell in the table?
In the Navigation pane in the cell that corresponds to the Topic, for now I have an address like this: =string.Format("http://{0}/SFA/opps/edit.aspx?id={1}", Parameters!srv.Value, Fields!objectid.Value)
What I need to change when it€™s a category 5 Opportunity is €œopps€? to €œcat5€?and add €œ&etc=10008€? to the end of the address. Any ideas?
PS. {0} and {1} are parameters, one server parameter and one opportunity ID parameter.
When I put this link in TextBox properties >> Navigation >> Jump URL of my gridView : http://www.micheldegremont.com it works.
However, if I put "http://www.micheldegremont.com?id=" + Fields!ID.Value it doesn't work. I haven't not link in my report.
And if I put http://www.micheldegremont.com?id=Fields!ID.Value my report create a hyperlink to http://www.micheldegremont.com?id=Fields!ID.Value and no http://www.micheldegremont.com?id=1
I have a doubt regarding use of navigation controls in a report and exporting the report. For example using a drilldown functionality in a report. After the report is generated one can export the report in whatever format he wants (PDF,TIFF, XML,...).
In this case, with the drill down functionality in the report, the details of the report are visible only when the plus sign is clicked. Suppose now the plus sign is not clicked and one exports the report in a PDF or TIFF format.
In the PDF file, the navigation or the drill down functionality is now not useful right ? There is no way to view the detail fields of the report now, using the PDF file right?
Anyone know why my navigation buttons on my reports is always dimmed so that I can only see the very first page of every report? I even spent some time with a Microsoft SQL Server engineer trying to figure this one out and he wasn't able to figure out why?
I tried to attach a picture but I guess pictures aren't allowed. The first page, previous page, next page and last page buttons displayed as arrows on the top left of the reports are always dimmed on every report even though they have multiple pages.
Has this happened to anyone and how did you get it fixed?
