Need SQL To Perform Repeater Paging
Feb 15, 2005
I want to build some paging functionality into my repeater (b4 you ask, datagrid not providing flexibility required for presentation).
I will have no problem with the VB logic but I will need to execute SQL that only returns results from x to y (e.g. results 21 thru 40 for page 2). I know I can do something like 'SELECT TOP 20 * FROM...', or something like it, for page 1. But, I'm not sure if it's possible to build SQL for the pages greater than 1. Any suggestions.
Thanks
Martin
View 1 Replies
ADVERTISEMENT
Sep 21, 2006
I'm new to ASP.NET and i've been banging my head aganist this problem for a few days now.I have a repeater and then a repeater inside that repeater. <asp:SqlDataSource ID="sqlRepeater1" runat="server" ConnectionString="<%$ ConnectionStrings:Inspections_DBCS %>" SelectCommand="SELECT count(*) as mycount FROM insuranceco with (NOLOCK) where insurancecoid=@insurancecoid" OnSelecting="sqlRepeater_Selecting" > <SelectParameters> <asp:Parameter DefaultValue='' Name="insurancecoid" Type="String" /> </SelectParameters> </asp:SqlDataSource> <% 'sqlRepeater1.SelectParameters["insurancecoid"].DefaultValue = "123"; %>This returns:Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: BC30451: Name 'sqlRepeater1' is not declared.Source Error:Line 38: Line 39: <% Line 40: sqlRepeater1.SelectParameters["insurancecoid"].DefaultValue = "123";Line 41: %>Line 42: I tried a solution i saw on the web about using the onselecting event but that didn't pan out either Protected Sub sqlRepeater_Selecting(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.SqlDataSourceSelectingEventArgs) 'Handles sqlRepeater1.Selecting WithEvents 'Response.Write(e.Command.Parameters.Add) 'e.Command.Parameters.Add(e.Command.CreateParameter("P1", "test")) 'e.Command.Parameters.Add("P1", "value")I have to be doing something wrong because i would think there has to be a way to reference variables when you are going from repeater to repeater i just dont know.Please help my mask of sanity is starting to slip off.Thanks
View 4 Replies
View Related
May 25, 2008
Hi there,
In 2005.NET, if I used an asp:repeater, I would load the data from source and then manipulate it like so://load the data from source using a predefined connection and SQL Statement.private void LoadMyDataFromSource(){ try { connection.Open(); OleDbDataReader myReader = comm.ExecuteReader(); rptrCatList.DataSource = myReader; rptrCatList.DataBind(); myReader.Close(); } finally { connection.Close(); }} //catch the ItemDataBound event and manipulate the data how I wish before it's loaded into the Repeater.protected void rptrCatList_ItemDataBound(object sender, RepeaterItemEventArgs e) { if (e.Item.ItemType == ListItemType.Item || e.Item.ItemType == ListItemType.AlternatingItem) { int title = 4; //this is the index of the column I wish to manipulate((Label)e.Item.FindControl("lblTitle")).Text = ((IDataRecord)e.Item.DataItem).GetString(title) + ":" } }This would give me all the flexbility I ever needed. But now I wish to use linq and since the IDataRecord relies on dataReader sources, I cannot obtain the same flexbility. Can anyone point me in the right direction for obtaining the same kind of flexbility but using a linq-to-SQL dataContext? I wish to manipulate mostData that comes through from my source, so: //loadng the data in via my linq-to-sql context.private void LoadProducts() { MyDataContext db = new MyDataContext (); var all = from p in db.Products_IncontinenceStandards where p.Product_Cat == "Category1" select p; rpterCat.DataSource = all; rpterCat.DataBind(); }This is where I get stuck because, even though I can still capture the ItemDataBound event since I have databound the Repeater to the linqSource, I can't access the individual fields (or this is what I think I can't do!), Does anyone know how to relate to this so I can create the same effect? Many Thanks,Nathan Channon
View 4 Replies
View Related
Oct 29, 2006
So I have code to fill my repeater with a data: Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Dim cnn As Data.SqlClient.SqlConnection = New Data.SqlClient.SqlConnection(System.Web.Configuration.WebConfigurationManager.ConnectionStrings("db_ConnStr").ConnectionString) Dim cmd1 As Data.SqlClient.SqlDataAdapter = New Data.SqlClient.SqlDataAdapter("SELECT aspnet_Users.UserName, COUNT(forum_posts.post_id) AS IlePost, forum_posts_1.post_content, forum_posts_1.topic_id, forum_posts_1.post_id, forum_posts_1.post_date FROM aspnet_Users INNER JOIN forum_posts ON aspnet_Users.uID = forum_posts.user_id INNER JOIN forum_posts AS forum_posts_1 ON aspnet_Users.uID = forum_posts_1.user_id GROUP BY aspnet_Users.UserName, forum_posts_1.post_content, forum_posts_1.topic_id, forum_posts_1.post_id, forum_posts_1.post_date HAVING (forum_posts_1.topic_id = @topic_id) ORDER BY forum_posts_1.post_date ASC", cnn) cmd1.SelectCommand.Parameters.AddWithValue("@topic_id", Request.QueryString("ID")) Dim ds As Data.DataSet = New Data.DataSet cnn.Open() cmd1.Fill(ds, "posts") Repeater1.DataSource = ds.Tables("posts") Page.DataBind() cnn.Close() End Sub And I want to take the value from column which I bolded - IlePost. I want take this out at compare with some condition. For example:Dim label as label = Repeater1.Findcontrol("Label1")If COLUMN < 10 thenlabel.text = "Less than 10"elselabel.text = "More than 10"I hope you understand me :-)
View 1 Replies
View Related
Mar 11, 2007
Hello Everyone,I am trying to create a query for the purpose of a nested repeater relation. The information needs to be pulled from one table. I have shortened the columns to the ones that are required.table - PagesIDPageNameParentPageIDSo, take the following example:ID 14, PageName - Service A, ParentPage ID = 6ID 15, PageName - Service B, ParentPage ID = 6ID 36 PageName - Client 1, ParentPage ID = 14ID 37 PageName - Client 2, ParentPage ID = 14ID 38 PageName - Client 3, ParentPage ID = 15ID 39 PageName - Client 4, ParentPage ID = 15 So, I want to create a query that will get my nested repeater to display as follows:Service A Client 1 Client 2Service B Client 3 Client 4What I have come up with so far is:SELECT * from tbl_Pages WHERE ParentPageID IN (Select ID From tbl_Pages)SELECT p.ParentPageID, p.PageName, p.ID FROM tbl_Pages pThe relation would be based off ParentPageID. I keep getting errors that either there is no unique value or the relation is null. What am I am missing here?
View 5 Replies
View Related
Jun 15, 2007
Hell Sir,
I am using repeater control to show the result after search .and using checkbox control in itemtemplate row .After searchresult i am facing a problem in identifying the checked checkboxes in the itemtemplate of repeater control .
Please provide appropriate solution ....
thanks for ur attention...
View 3 Replies
View Related
May 14, 2008
Hi,
I'm coming from a language called Progress and need some basic help with SQL and ASP.net
Here's my item table from database with 6 recordscolor fruit
red applered bananared cherryblue appleblue bananablue cherry
My goal is to put in HTML tables like so..
red
apple
banana
cherry
blue
apple
banana
cherry
I was going to use the ASP.net Repeater control by doing with some SQL statement that will produce this 6 records with a calculated field..
color fruit firstColorInFruitGroupred apple yesred banana nored cherry noblue apple yesblue banana noblue cherry no
So basically when I see a yes thats when I know its a <TH>"heading"
When I see a no, thats when I see that its a <TD> "data"
How would I write this SQL statement? or is there a better way of doing this? Thanks much!
View 7 Replies
View Related
Jun 4, 2008
I need to set a Repeater.Datasource to one of three stored procedures depending on what button the user selects. How do I set it up please?<asp:SqlDataSource ID="SqlDataSource5" runat="server" ConnectionString="<%$ ConnectionStrings:ABCConnectionString %>"SelectCommand="???????????????" SelectCommandType="StoredProcedure"><SelectParameters><asp:ControlParameter ControlID="???????????????????" Name="?????????????" PropertyName="Text" Type="string" /></SelectParameters></asp:SqlDataSource>
protected void btnKeyWordSearch_Click(object sender, ImageClickEventArgs e){ mode = 1; StoredProcdureName = "KWSearch"; KWords = tbxKWordText.Text;}protected void btnCompanyNameSearch_Click(object sender, ImageClickEventArgs e){ mode = 1; StoredProcdureName = "NAMESearch"; CoName = tbxCoNameText.Text;}protected void btnBrandNameSearch_Click(object sender, ImageClickEventArgs e){ mode = 1; StoredProcdureName = "BRANDSearch"; Brand = tbxBrandText.Text;}
View 1 Replies
View Related
Aug 29, 2005
Q1 - I want to compare file names uploaded by users with the name of the file present in the database. I have a repeated control that shows the data alongwith an array of <input type=file> that is createddynamically when the data is displayed in the repeater control. (So there is an input tag within the ItemTEmplate tag in the repeater)Now I want to compare the names of the files uploaded by the user with the values as displayed in the repeater. Is there a way I can do this? So I need to be able to get the data (for example Name) as displayed in the repeater control into a variable like Dim strName As String. Something like: Dim strName As String = (value from the repeater control) Can I do this? How?
Q2 - I want to return a value from a stored procedure that will be stored in a variable in VB and will be used for comparison. So, I want to return a 0 or 1 and then use .ReturnValue method to store this value. The problem that I am facing is that I am using a cursor. And as soon as return is called in the SP it exitsthe procedure and returns only one value (1 if found 0 otherwise) So it does not loop through the completecursor. What can I do to fix this? CODE:
OPEN cur1--print 'Cursor Open'FETCH NEXT FROM cur1 INTO @varFile, @varFileEx, @varFileSt
WHILE @@FETCH_STATUS = 0BEGINIF (@varFile = @FileName AND @varFileEx = @FileExt)BEGINset @varReturn = 0ENDELSE BEGINset @varReturn = 1ENDFETCH NEXT FROM cur_FileSystem INTO @varFileName, @varFileExt, @varFileStatusreturn (@varReturn)ENDCLOSE cur_FileSystemDEALLOCATE cur_FileSystem
Please help. Thanks
View 2 Replies
View Related
Jan 15, 2006
Hi,
I have a repeater which i need to build editing capabilities into in a similar way as the GridView, just a little unsure how to tie it together. Ideally i would like to use a GridView as this would do all of the work for me however it looks like I need to go with the repeater due to the nested nature of the data I am working with.
What is the best way to go about updating the data source from within a repeater? I have already built the edit interface with some MultiViews in the Repeater control and handling the ItemCommand event, just not sure how to actually update the data source.
Can I still use the SqlDataSource wizard to generate all of the SQL for me? If so, within the ItemCommand event handler I have the data i want to update back to the database by using the FindControl method and retrieving the Text, but how do i get this data into the SqlDataSource object and update the database?
Are there any samples available which show how to update a datasource using a repeater?
Your help is much appreciated
trenyboy
View 6 Replies
View Related
Dec 6, 2006
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
original source code
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DatabaseConnectionString %>" SelectCommand="SELECT [authorID], [firstname] FROM [author] where id=1" ></asp:SqlDataSource>
<asp:Repeater ID="rpt" DataSourceID="SqlDataSource1" runat="server">
<ItemTemplate>
<asp:TextBox ID="TextBox1" runat="server" Style="z-index: 100; left: 65px; position: absolute;
top: 59px" Text='<%# authorID %>' ></asp:TextBox>
<asp:TextBox ID="TextBox2" runat="server" Style="z-index: 101; left: 66px; position: absolute;
top: 96px" Text='<%# firstName %>'></asp:TextBox>
</ItemTemplate>
</asp:Repeater>
<asp:Button ID="Button1" runat="server" Style="z-index: 102; left: 46px; position: absolute;
top: 164px" Text="next" />
<asp:Button ID="Button2" runat="server" Style="z-index: 103; left: 102px; position: absolute;
top: 163px" Text="first" />
<asp:Button ID="Button3" runat="server" Style="z-index: 104; left: 156px; position: absolute;
top: 162px" Text="prev" />
<asp:Button ID="Button4" runat="server" Style="z-index: 106; left: 208px; position: absolute;
top: 162px" Text="last" />
</div>
</form>
Compiler Error Message: CS0103: The name 'authorID' does not exist in the current contextSource Error:
Line 13: <asp:Repeater ID="rpt" DataSourceID="SqlDataSource1" runat="server">
Line 14: <ItemTemplate>
Line 15: <asp:TextBox ID="TextBox1" runat="server" Style="z-index: 100; left: 65px; position: absolute;
Line 16: top: 59px" Text='<%# authorID %>' ></asp:TextBox>
Line 17: <asp:TextBox ID="TextBox2" runat="server" Style="z-index: 101; left: 66px; position: absolute;
View 1 Replies
View Related
Jan 27, 2008
I'm about ready to pull my hair out. I have a repeater control, and a date field. If the field is a valid date, I'll use it to calculate and display the person's age. Otherwise, I want to display "N/A". My problem is trying to determine if the date field is null or not.I'm using SQL Server 2005 which allows Nulls in the date field, and for many records I don't have a birth date. It makes sense for these records to leave the date Null. This is my code:Protected Sub Repeater1_ItemDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.RepeaterItemEventArgs) Handles Repeater1.ItemDataBound If e.Item.ItemType = ListItemType.Item OrElse e.Item.ItemType = ListItemType.AlternatingItem Then Dim LabelIcon As Label = CType(e.Item.FindControl("LabelIcon"), Label) Dim LblAge As Label = CType(e.Item.FindControl("LblAge"), Label) Dim inmate As WAP.prisonmembersRow = CType(CType(e.Item.DataItem, System.Data.DataRowView).Row, WAP.prisonmembersRow) If System.IO.File.Exists(Server.MapPath("~/images/picts/" & inmate.FILE2 & ".jpg")) Then LabelIcon.Visible = True End If If inmate.DATE_OF_BIRTH Is DBNull.Value Then If IsDate(inmate.DATE_OF_BIRTH) Then LblAge.Text = "Age: N/A" Else LblAge.Text = "Age: " & GetBirthdate(inmate.DATE_OF_BIRTH) End If End If End IfEnd Sub How can I resolve this?Diane
View 7 Replies
View Related
Apr 5, 2004
i am trying to search an SQL database to retrieve all names from employee table who have a birthday today. this needs to automatically fill in the date parameter with the system date. this is what i have so far:
sub page_load(sender as object, e as eventargs)
dtmDate=DateTime.Now.ToString("M")
con = New SqlConnection("Server=Localhost;UID=******;PWD=*****;Database=Pubs")
cmd = New SqlCommand("Select fname, lname From Employee where dob='& dtmDate'", con)
con.open()
dtrBday = cmd.ExecuteReader()
rptBday.DataSource=dtrBday
rptBday.DataBind()
dtrBday.Close()
I know this isnt quite right. i get errors when it hits my repeater.
the error i am getting is :Syntax error converting string to smalldatetime data type.
if someone could give me a push in the right direction here it would be greatly appreciated.
View 2 Replies
View Related
May 10, 2007
Sorry to ask a stupid question. I have SQL Server 2000 on SBS 2003. I can't find Perform.exe. Anybody know where it should be (I'm sure that you all do!),
Thanks
Colin
View 4 Replies
View Related
Apr 14, 2008
Hi,any body pls help me with the concept called transaction ?Where excatly we are doin this ? In the SQL or through c# codings.i have 3 stored procedures, where i am calling this one by one to perform a single operation in the client side.if any one fails, due to some exceptions. it should rollback and come to the initial state.... How to perform this ? any ideas..
View 8 Replies
View Related
Jan 18, 2003
I have a sp that creates a #temp table and performs a bulk insert.
CREATE TABLE #template (template varchar(8000))
EXEC ('bulk INSERT #template FROM "' + @filename + '"')
SET @html = (SELECT template FROM #template)
DROP TABLE #template
...
When I access this sp with any other user than 'sa' I get this error message:
The current user is not the database or object owner of table '#template'. Cannot perform SET operation.
I've been everywhere (with no success) in the sql srv admin to look for the appropriate check box to allow another named user to access this sp.
Can anyone help?
View 2 Replies
View Related
Apr 14, 2008
IDENTITY_INSERT is already ON for table 'Elbalazo.dbo.DeliveryOption'. Cannot perform SET operation for table 'City'
Here's my entire script:
--------------------------------------------------------------------
/*Disable Constraints & Triggers*/
exec sp_MSforeachtable 'ALTER TABLE ? NOCHECK CONSTRAINT ALL'
exec sp_MSforeachtable 'ALTER TABLE ? DISABLE TRIGGER ALL'
/*Perform delete operation on all table for cleanup*/
exec sp_MSforeachtable 'DELETE ?'
/*Enable Constraints & Triggers again*/
--exec sp_MSforeachtable 'ALTER TABLE ? CHECK CONSTRAINT ALL'
exec sp_MSforeachtable 'ALTER TABLE ? ENABLE TRIGGER ALL'
/*Reset Identity on tables with identity column*/
exec sp_MSforeachtable 'IF OBJECTPROPERTY(OBJECT_ID(''?''), ''TableHasIdentity'') = 1 BEGIN DBCC CHECKIDENT (''?'',RESEED,0) END'
-- City
SET IDENTITY_INSERT City ON
INSERT INTO Elbalazo.dbo.City (
[CityID]
,[CityName]
,[CountyID]
,[Active])
SELECT [CityID],[CityName],[CountyID],1
FROM [ElbalazoProduction].dbo.tbl_City
SET IDENTITY_INSERT City OFF
-- State
SET IDENTITY_INSERT [State] ON
INSERT INTO Elbalazo.dbo.State (
[StateID]
,[State]
,[Active])
SELECT [StateID],[State],1
FROM [ElbalazoProduction].dbo.tbl_State
SET IDENTITY_INSERT [State] OFF
-- NumberOfPeopleOption
SET IDENTITY_INSERT NumberOfPeopleOption ON
INSERT INTO [Elbalazo].[dbo].[NumberOfPeopleOption]
([NumberOfPeopleOptionID]
,[NumberOfPeopleNameOption]
,[Active])
SELECT [NumberOfPeopleID], [NumberOfPeopleName],1
FROM [ElbalazoProduction].dbo.tbl_NumberOfPeople
SET IDENTITY_INSERT NumberOfPeopleOption OFF
-- DeliveryOption
SET IDENTITY_INSERT DeliveryOption ON
INSERT INTO [Elbalazo].[dbo].[DeliveryOption]
([DeliveryOptionID]
,[DeliveryOptionName]
,[Active])
SELECT [DeliveryOptionID], [DeliveryOptionName],1
FROM [ElbalazoProduction].dbo.tbl_DeliveryOption
SET IDENTITY_INSERT DeliveryOption OFF
-- User
SET IDENTITY_INSERT [User] ON
INSERT INTO [Elbalazo].[dbo].[User]
([UserID]
,[FirstName]
,[LastName]
,[Address1]
,[Address2]
,[CityID]
,[StateID]
,[Zip]
,[PhoneAreaCode]
,[PhonePrefix]
,[PhoneSuffix]
,[Email]
,[CreateDate]
,[Active])
SELECT [CustomerID]
,[FirstName]
,[LastName]
,[AddressLine1]
,NULL
,[CityID]
,[StateID]
,[Zip]
,[PhoneAreaCode]
,[PhonePrefix]
,[PhoneSuffix]
,[EmailPrefix] + '@' + [EmailSuffix]
,[CreateDate]
,1
FROM [ElbalazoProduction].dbo.tbl_Customer
SET IDENTITY_INSERT [User] OFF
-- EntreeOption
SET IDENTITY_INSERT EntreeOption ON
INSERT INTO [Elbalazo].[dbo].[EntreeOption]
([EntreeOptionID]
,[EntreeOptionName]
,[Active])
SELECT [EntreeOptionID]
,[EntreeOptionName]
,1
FROM [ElbalazoProduction].dbo.tbl_EntreeOption
SET IDENTITY_INSERT EntreeOption OFF
-- CateringOrder
SET IDENTITY_INSERT CateringOrder ON
INSERT INTO [Elbalazo].[dbo].[CateringOrder]
([CateringOrderID]
,[UserID]
,[NumberOfPeopleID]
,[BeanOptionID]
,[TortillaOptionID]
,[CreateDate]
,[Notes]
,[EventDate]
,[DeliveryOptionID])
SELECT [CateringOrderID]
,[CustomerID]
,[NumberOfPeopleID]
,[BeanOptionID]
,[TortillaOptionID]
,[CreateDate]
,[Notes]
,[EventDate]
,[DeliveryOptionID]
FROM [ElbalazoProduction].dbo.tbl_CateringOrder
SET IDENTITY_INSERT CateringOrder OFF
-- CateringOrder_EntreeItem
SET IDENTITY_INSERT CateringOrderEntreeItem ON
INSERT INTO [Elbalazo].[dbo].[CateringOrderEntreeItem]
([CateringOrderEntreeItemID]
,[CateringOrderID]
,[EntreeItemID])
SELECT [CateringORder_EntreeItemID]
,[CateringOrderID]
,[EntreeItemID]
FROM [ElbalazoProduction].dbo.tbl_CateringOrder_EntreeItem
SET IDENTITY_INSERT CateringOrderEntreeItem OFF
select * from BeanOption
select * from CateringItemIncluded
select * from CateringOrder
select * from CateringOrderEntreeItem
select * from CateringOrderEntrees
select * from City
select * from Country
select * from DeliveryOption
select * from EntreeOption
select * from NumberOfPeopleOption
select * from [State]
select * from [User]
View 15 Replies
View Related
Jun 6, 2008
Hi all, I hope you guys can help me with the following bit of T-SQL. I already have a solution but I really don't like it and I've been trying to find a simpler more elegant way of doing the same thing.
Firstly, let me present you with a brief explanation of what I am trying to do together with some sample data for you to play with and hopefully assist me in finding a better solution than the one I’ve come up with.
So.. here goes
I have two tables:
create table #VehMake (VehMakeId int, VehMake varchar(100))
insert into #VehMake
select 222, 'FORD' union all
select 210, 'FORD (USA)' union all
select 223, 'FORD (AUS)' union all
select 269, 'HONDA' union all
select 253, 'NISSAN' union all
select 280, 'VOLKSWAGEN'
This contains various vehicle makes which I'm sure you'll recognise!
The second table contains vehicle histories:
create table #VehicleHistory (PersonId int, VehMakeVehModel varchar(200), VehMake varchar(100), VehModel varchar(100))
insert into #VehicleHistory (PersonId, VehMakeVehModel)
select 1, 'FORD (USA) MUSTANG' union all
select 2, 'HONDA CIVIC' union all
select 3, 'NISAAN ALMERA' union all
select 4, 'VOLKSWAGEN PASSAT'
As you can see, in the second table, the second column contains a string of the vehicle Make and Model in one string. What I need to do is to split the Make and Model in to separate columns with an update statement.
This seems easy enough with a simple LIKE comparison:
VehMakeVehModel like VehMake+' %'
....BUT if you notice, there are two records in the #VehMake table that are similar but not the same. These are the 'FORD (USA)' and 'FORD (AUS)'. The update statement would return two records from the #VehMake table when trying to match with the first record in my #VehicleHistory table.
As I said, I did come up with a solution but it seems over complicated and I have a feeling that there is a way of doing this with an update. Maybe use the LEN() function but I'm not sure.
Your help would be much appreciated.
BTW, once I've identified the correct Make, I can easily populate my model as all I have to do is use the replace function on VehMakeVehModel column and remove the matched make to get the full model name.
Hope that makes sense and thanks for any help in advance.
View 8 Replies
View Related
Aug 10, 2006
Hello all.
I am looking to perform a calculation and enter the reult into a field within my table. The fields that I need to base the calculation on are all in one table (SALARY). The fields are: SALARY and BASIC_HOURS and the result is to be entered into field HOURLY_RATE. The actualy calculation to be preformed is:
hourly rate = ()salary / 52)/basic hours)
Thanks for reading :)
View 4 Replies
View Related
Aug 31, 2007
Hello,
i am using Full text search for my web application search SP.
i have used Contains for Exact search and Freetext for Any word kind of search.
now i want to perform Like search using Contains.
same behaviour which we can get using LIKE word. (e.g. Select * from tbl where field like 'abc%')
even i have tried using contains(title,'"*Documen*"') . but its not working.
Kindly Let me know how to perform this.
Thanks.
View 3 Replies
View Related
Oct 11, 2006
I am using this SQL in a stored procedure:
INSERT INTO staff_address (staff_number, block_number, block_name) VALUES(@staff_number, @block_number, @block_name)
and I want to update the value @block_number from blocks database with:
SELECT * FROM blocks WHERE block_number = given_block_number
View 5 Replies
View Related
Sep 29, 2006
What i want:
Receive files from remote server every 8 hours daily,and if these files are all created during this period ,then execute next step
My thought:
I can receive files using FTP Task and i can set up job from Sql Agent
but how can i say whether these files are new or old?
Any idea? Thanks
View 4 Replies
View Related
Oct 12, 2004
Is there any way to implement a paging scheme such that only the required records are transferred from SQL Server to the asp.net app?
The only support I can find such as the DataAdaptor.Fill will bring all the records back from SQL Server and then create the page...
This obviously still takes time and memory based on the entire query, not the page size.
Any ideas?
View 2 Replies
View Related
Jul 26, 2005
I have a table with a lot of records. I want to make paging without passing all the data back to a dataset. I know how to select the top n rows but how do I select 10-20 for example.
View 3 Replies
View Related
Dec 9, 2005
Hello,
How can I do paging in my SQL Server stored procedure.
I have thought of a way, but I need to :
"SELECT TOP @Count..."
which is not allowed :S
What can I do to get around this?
View 1 Replies
View Related
Dec 11, 2003
I have noticed that the server i'm running SQL2k on is starting to page out of the norm. I can see that the regsvc and sqlservr svc are showing high page faults/sec. I have 3 gigs of ram and set the max that sql can use to 2 gigs. It is currently using only 168 MB and still will show high paging at random times. I know I can add more ram but that doesn't seem to be the problem. I have also stopped unnecessary services at the os level.
Any other suggestions to fix this?
Thanks in advance.
View 6 Replies
View Related
May 9, 2008
Hi there
I've managed to make it query that return a dataset that have 2 views utilising the "Filter" in RS. I treat this as a single record with multiple views.
Now let say if I have a stored precedure that pass 2 parameters one is called state and year and accepting 'ALL' for every possibility of State and Year and construct that into single dataset with 2 views similar like above.
How do I breakdown this in the reporting services so it will have paging?
This is a simple dataset:
RECORDID, ReportViewType, State, Year, VALUE
1, "VIEW1", "NSW", 1, null
1, "VIEW2", null, null, 10000
2, "VIEW1", "NSW", 2, null
2, "VIEW2", null, null, 11000
3, "VIEW1", "VIC", 1, null
3, "VIEW2", null, null, 11003
4, "VIEW1", "VIC", 2, null
4, "VIEW2", null, null, 11001
I would like to break down (paging) this per recordid. Each page obviosuly has 2 views using the same data set with different FILTER.
Do I need to put into a LIST then inside that list put 2 TABLES? Is this possible?!?!
Thanks
View 5 Replies
View Related
Sep 5, 2006
this is my code: 1 myconnection = new SqlConnection(kiemtraloi,chuoiketnoi);
2 mycommand.Parameters.Add(new SqlParameter("@mancc",SqlDbType.VarChar,10));
3 mycommand.Parameters["@mancc"].Value = TextBox1.Text;
4 myconnection.Open();
5 myreader = mycommand.ExecuteReader();
6 if(myreader.HasRows)
And when I click to start button, a error appear: NO overload for method 'sqlconnection' takes '2' argumentsI don't know what i must do :(, please help methx
View 4 Replies
View Related
Dec 11, 2007
My e-commerce site is currently running the following process when items are shipped from the manufacturer:1. Manufacturer sends a 2-column CSV to the retailer containing an Order Number and its Shipping Tracking Number.2. Through the web admin panel I've built, a retail staff member uploads the CSV to the server.3. In code, the CSV is parsed. The tracking number is saved to the database attached to the Order Number.4. After a tracking # is saved, each item in that order has its status updated to Shipped.5. The customer is sent an email using ASPEmail from Persits which contains their tracking #.The process seems to work without a problem so long as the CSV contains roughly 50 tracking #'s or so. The retailer has gotten insanely busy and wants to upload 3 or 4 thousand tracking #'s in a single CSV, but the process times out, even with large server timeout values being set in code. Is there a way to streamline the process to make this work more efficiently? I can provide the code if that helps.
View 5 Replies
View Related
May 5, 2008
Hi all,
Lets say that i have 3 tables, they are already related together, information on each of the 3 tables and their relationship between eachother can be found below:I am using Microsoft SQL Server 2005 Database in Visual Web Developer 2008 using VB programming (ADO.NET)The 3 tables are as follows:
FloorRoomLocation
Fields inside each of the tables can be found below:
Floor Table(PK) ID(Required) NameDisplayOrder
Room Table(PK) ID(Required) Name(PK, FK) FloorIDExchangeIDExtensionIPDeviceNameRemarks(Required) Equipment(Required) Floor2IDFloorLocationXFloorLocationY
Location Table(PK,FK) FloorID (Required) CountryName(Required) CityName(Required) BuildingName
The Relationships between the 3 tables are as follows:
ID field in Floor table is referenced by the field named FloorID in the Room Table
ID field in Floor table is referenced by the field named FloorID in the Location table
NOTE: Location Table serves only as an extension to Floor table thus they have a 1 to 1 relationship, due to My Projects Lead's instructions I am not allowed to consolidate the Floor Table and the Location Table as 1 whole table.
Floor Table has a 1 to Many Relationship with the Room Table.
I Have already done the physical relationships between each of the 3 tables in the Database Diagram, in Visual Web Developer 2008 Express Edition under the Database Explorer
So i have created this form to accept user input:
this form is in a aspx page called AddRooms.aspx
Country Name:______________ (data sent to location table)
City Name:_________________ (data sent to location table)
Building Name:______________ (data sent to location table)
FloorID:[This is a DropDownList which is databinded to the Floor Table]
Room Name:_______________ (data sent to room table)
*Just imagine that the above is a form to accept user input
*With a hit of a submit button all data will be sent to their respective tables in the database
Now i know that i have to JOIN tables in my database in order for my application to work, but i have no experience performing JOIN, i need great guys like you to help me apply JOIN to the 3 tables mentioned above, do let me know if you have any doubts in what i am trying to do.
Do give me that code that i can either apply in the (VB environment Visual Web Developer 2008) and/or in Microsoft SQL Server 2005 environment
Just need the SQL Statment that i will need to construct to perform the JOIN i need to.
Please Help
Many Thanks : )
View 2 Replies
View Related
Mar 22, 2007
I had my IT dept. install sql server 2005 enterprise edition on a new windows server 2003. All other machines are running sql 2000 server on windows server 2000. I am a sa and local admin on all servers. I tried performing copy database, backup and restore and detach and attach to upgrade the sql server 2000 databases to 2005 and all fail. I followed all steps. I was imformed that IT installed sp2 for sql server 2005. It's like the servers dont talk to each other. Their all on the company's domain. I am wondering if something happen with the install but the IT dept. insist that everything went fine. It's strange that I can't perform a simple backup and restore it on the new server buy when I click on restore it doesn't let me browse to get the backup file on the 2000 server. I never had a problem in Sql 2000 with backup. Can it be the installation was corrupted somehow. It seems fine. I haven't created any new databases because I wanted to move the databases from sql 2000. Can anyone help me get a clue of what the problem is please?
Thanks
View 2 Replies
View Related
May 31, 2008
Hi,
Appreciated someone able to provide me some clu on how to perfom DBCC CHECKDB. Is it necessary to set the database to "Read only" before execute DBCC CHECKDB?
Appreaciated your help.
Regards,
Jimmy Liew
View 3 Replies
View Related
Mar 22, 2007
I had my IT dept. install sql server 2005 enterprise edition on a new windows server 2003. All other machines are running sql 2000 server on windows server 2000. I am a sa and local admin on all servers. I tried performing copy database, backup and restore and detach and attach to upgrade the sql server 2000 databases to 2005 and all fail. I followed all steps. I was imformed that IT installed sp2 for sql server 2005. It's like the servers dont talk to each other. Their all on the company's domain. I am wondering if something happen with the install but the IT dept. insist that everything went fine. It's strange that I can't perform a simple backup and restore it on the new server buy when I click on restore it doesn't let me browse to get the backup file on the 2000 server. I never had a problem in Sql 2000 with backup. Can it be the installation was corrupted somehow. It seems fine. I haven't created any new databases because I wanted to move the databases from sql 2000. Can anyone help me get a clue of what the problem is please?
Thanks
View 1 Replies
View Related
