I have the following query:
(SELECT MIN(CFGDates.AccountPdEnd)
FROM CFGDates LEFT JOIN
AR ON AR.Period = CFGDates.Period
WHERE AR.Period = '200408')
I need to convert this into a case statement.
I tried various ways but did not get the result that I was after
Thanks,
Laura
I need to pull one field from one table and one field from another table that is i need to pull 'eGroupName' field from 'Exception' Table and 'eGroup Description' field from 'eGroup' Table but there is no connection between these two tables means there is no forign key relationship between these two tables but i need to pull both fields . If i use INNER JOIN i need to mention relationship between both tables right? so how to write query for this , and one more thing is i need to add an extra column as "Location"which is not there in either of tables for that i need to use CASE Statement as if DataSource = 1 then "ABC" else "BCD" . pls help me out in writing SQL Statement???
is this correct ?? its showing me errors
Select Exception.eGroupName, eGroup.eGroupDescription from Exception Inner Join eGroup ON ???
(case when 'DataSource =1' then 'ABC' then 'BCD' endcase)
Where .....
Pls correct me
Thanks
Hi folks,
Hope you are all well.
I am using a CASE statement within a SELECT query to sum up values for different customers.
SELECT CR_CUST.Customer_Code,
'General_01' = CASE WHEN CR_PROD.Part_Class_Code = '01' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_07' = CASE WHEN CR_PROD.Part_Class_Code = '07' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END,
'General_08' = CASE WHEN CR_PROD.Part_Class_Code = '08' THEN SUM(CR_INVOICE.Line_Value) ELSE 0 END
FROM CR_CUST
INNER JOIN CR_INVOICE ON CR_CUST.Customer_Code = CR_INVOICE.Customer_Code
INNER JOIN CR_PROD ON CR_INVOICE.Product_Code = CR_PROD.Product_Code
WHERE (CR_PROD.Part_Class_Code = 1 OR
CR_PROD.Part_Class_Code = 7 OR
CR_PROD.Part_Class_Code = 8)
GROUP BY CR_CUST.Customer_Code,
CR_PROD.Part_Class_Code
The above query produces the following results...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 .00 .00
02347 7606.49 .00 .00
02210 .00 12618.42 .00
02347 .00 13131.63 .00
02210 .00 .00 4505.44
02347 .00 .00 5018.03
My question is this - is it possible to expand my SQL Query into a Sub Query so that each customers data appears on the same line of the results?, like so...
Customer_Code General_01 General_07 General_08
------------- ---------------- ---------------- ----------------
02210 10074.30 12618.42 4505.44
02347 7606.49 13131.63 5018.03
I can achieve this by writing my results into a temporary table and extracting the data with the following SQL Query, but I just thought it would be really cool if I could do it in one SQL Statement without using a temporary table.
SELECT Customer_Code,
SUM(General_01),
SUM(General_07),
SUM(General_08)
FROM #MyTempTable
GROUP BY Customer_Code
Thanks in advance,
Kev
How come SQL Server doesn't like the following?
CREATE PROCEDURE sp_myproc
(@myvar int)
AS
CASE @myvar
WHEN 1
EXEC sp1
WHEN 2
EXEC sp2
WHEN 3
EXEC sp3
DEFAULT
EXEC sp3
END
How can I code something like this legally in T-SQL?
Thanks
Jason
I have a case statement which I need to alter in my query. The field [sr.spec_value] contains either 1 or 0. When it is 1 I want the case expression to return 'YES' when 0 then 'NO'. I've tried a couple of options from the forum but am not getting it right. Here is the original case statement from my query:
case when sr.spec_value = 1 then 'YES' when 0 then 'NO' end [Fixed].
I have a query where I need to see in 2 seperate columns, the Actual date of deliveries and collections, and the Invoice Week number of the same. The problem is that in our ERP system delivery date (di.ddate) is a date field, and the collection date is nvarchar. This is my query and sample results below, as you can see I'm getting nulls for the collection lines. How can I do this efficiently
select di.dticket, di.item,
case di.item when 'DEL' then di.ddate when 'COL' then CONVERT(datetime,di.text2,103) end ActDate,
Case when di.item = 'DEL' then
(select YearWeek from MCSReports.RptRevenueGuideWeekLookup
where di.ddate between FromDate and ToDate) end InvWeek
from deltickitem di
where item in ('DEL','COL')
Sample results below:
dticket item ActDate InvWeek
-------------------- -------------------------------------------------- ----------------------- --------
01-000002 DEL 2011-07-05 15:53:00.000 2011-27
01-000002 COL NULL NULL
01-000004 DEL 2011-07-05 16:04:00.000 2011-27
01-000004 COL NULL NULL
01-000005 DEL 2011-07-05 16:08:00.000 2011-27
01-000005 COL NULL NULL
01-000006 DEL 2011-07-05 16:19:00.000 2011-27
01-000006 COL NULL NULL
01-000007 DEL 2011-07-05 16:24:00.000 2011-27
01-000007 COL NULL NULL
01-000008 DEL 2011-07-05 16:29:00.000 2011-27
01-000021 DEL 2011-07-05 08:48:00.000 2011-27
Hello.
I have data in a SSIS package that I need to alter to something else.
The source column is a VARCHAR(3) column and it only contains two possible values, "ACT" or "CLS".
The destination column is a CHAR(1) column. Where the value of the source column is 'ACT' I want to put '1' in the destination and where the value of the source column is 'CLS' I want to put '0'.
I can do this easily in T-SQL using a CASE statement but the source data is an Ingres database and CASE isn't a valid SQL keyword.
Can I use a data conversion task to do this in SSIS? and if so, what's the syntax?
Thanks
I have a stored procedure in which we are deriving some flags. So, we used series of CASE statements.
For examples
CASE
WHEN LEFT(CommissionerCode, 3) IN ('ABC','DEF',...) THEN 1
WHEN PracticeCode IN (.......) THEN 1
WHEN (CommissionerCode IN (.....) OR PracticeCode NOT IN (.....) OR .....) THEN 1
ELSE 0
END
I need to put these conditions in config table and generate dynamic sql. What is the best way to do this? especially, 3rd condition with OR logic with multiple columns involved.
I have a stored procedure in which we are deriving some flags. So, we used series of CASE statements.
For examples
CASE
WHEN LEFT(CommissionerCode, 3) IN ('ABC','DEF',...) THEN 1
WHEN PracticeCode IN (.......) THEN 1
WHEN (CommissionerCode IN (.....) OR PracticeCode NOT IN (.....) OR .....) THEN 1
ELSE 0
END
I need to put these conditions in config table and generate dynamic sql.
What is the best way to do this? especially, 3rd condition with OR logic with multiple columns involved.
Hello friends,
I want to use select statement in a CASE inside procedure.
can I do it? of yes then how can i do it ?
following part of the procedure clears my requirement.
SELECT E.EmployeeID,
CASE E.EmployeeType
WHEN 1 THEN
select * from Tbl1
WHEN 2 THEN
select * from Tbl2
WHEN 3 THEN
select * from Tbl3
END
FROM EMPLOYEE E
can any one help me in this?
please give me a sample query.
Thanks and Regards,
Kiran Suthar
I am attempting to run update statements within a SELECT CASE statement.
Select case x.field
WHEN 'XXX' THEN
UPDATE TABLE1
SET TABLE1.FIELD2 = 1
ELSE
UPDATE TABLE2
SET TABLE2.FIELD1 = 2
END
FROM OuterTable x
I get incorrect syntax near the keyword 'update'.
I have 3 tables, with this relation:
tblChats.WebsiteID = tblWebsite.ID
tblWebsite.AccountID = tblAccount.ID
I need to delete rows within tblChats where tblChats.StartTime - GETDATE() < 180 and where they are apart of @AccountID. I have this select statement that works fine, but I am having trouble converting it to a delete statement:
SELECT * FROM tblChats c
LEFT JOIN tblWebsites sites ON sites.ID = c.WebsiteID
LEFT JOIN tblAccounts accounts on accounts.ID = sites.AccountID
WHERE accounts.ID = 16 AND GETDATE() - c.StartTime > 180
A table has a column containing values "Y", "N", and some blanks.
I'm trying to write a single SELECT statement applied for that column that displays the word "Yes" instead of "Y" (in the table itself) and the word "No" instead of "N".
Can't figure it out. Any ideas appreciated.
Thanks,
barkingdog
Hi, i've got this stored procedure:
@LidFederatieNummer varchar(20),
@ClubID int,
@LidClubNummer varchar(50),
@PersoonNaam varchar(100),
@ClubStamnummer varchar(10),
@ClubNaam varchar(50),
@SeizoenID int,
@ShowAllJN bit,
@LidFederatieJN int,
@CategorieID int
AS
BEGIN
IF @CategorieID IS NOT NULL BEGIN
DECLARE @LicentieVerplicht int
SET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
END
IF (@ShowAllJN = 0)
BEGIN
SET RowCount 100
END
CASE @LicentieVerplicht
WHEN '1' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 1
Order By Persoon
END
WHEN '2' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN)
ORDER BY Persoon
END
WHEN '3' THEN
BEGIN
SELECTDISTINCT
ClubStamnummer,
ClubID,
ClubNaam,
LidID,
PersoonID,
Persoon,
LidFederatieNummer,
LidClubNummer,
vwClubLidPersoonAlgemeen.LidClubID,
vwClubLidPersoonAlgemeen.LicentieJN,
UserName,
PersoonActiefJN,
LI.SeizoenID,
LI.LidFederatieJN
FROM vwClubLidPersoonAlgemeen
INNER JOIN Persoon P ON vwClubLidPersoonAlgemeen.PersoonID = P.ID
INNER JOIN LidInschrijving LI ON LI.LidClubID = vwClubLidPersoonAlgemeen.LidClubID AND LI.ID = (SELECT TOP 1 LidInschrijving.ID FROM LidInschrijving WHERE LidInschrijving.LidClubID = vwClubLidPersoonAlgemeen.LidClubID ORDER BY ID DESC)
WHERE
LidFederatieNummer LIKE '%'+@LidFederatieNummer+'%'AND
ISNULL(LidClubNummer,'') LIKE '%'+@LidClubNummer+'%'AND
Persoon LIKE '%'+@PersoonNaam+'%'AND
ClubStamnummer LIKE @ClubStamnummer AND
ClubNaam LIKE '%' + @ClubNaam + '%' AND
(@ClubID = 0 OR ClubID = @ClubID) AND
(@SeizoenID = 0 OR vwClubLidPersoonAlgemeen.SeizoenID = @SeizoenID) AND
(@LidFederatieJN = -1 OR CAST(@LidFederatieJN as bit) = LI.LidFederatieJN) AND
vwClubLidPersoonAlgemeen.LicentieJN = 0
Order By Persoon
END
According the value of my @LicentieVerplicht variable:
DECLARE @LicentieVerplicht intSET @LicentieVerplicht = (SELECT LicentieVerplicht FROM Categorie WHERE ID = @CategorieID)
My where clausule should change... how can i achieve this cause my case is not working because it is not inside the select statement
Hi everyone,
I have the following problem withj this query:
SELECT DocNumber,
Title,FirstName,LastName,Paper,
ANNO,Location,Keywords,
URL= case WHEN URL IS NULL THEN
'|<a
href=''https://illiad.library.nova.edu/illiad/FNN/illiad.dll?ILLiadRedirect=OpenURL&genre=thesis&isbn='+CONVERT(varchar,DocNumber)+'&title='+CONVERT(varchar,Title)+'&rft.pub='+CONVERT(varchar,Program)+'&rft.edition='+
CONVERT(varchar,Paper) +'&date='+ CONVERT(varchar,ANNO)+
'&aulast=' + CONVERT(varchar,Lastname) + '&aufirst=' +
CONVERT(varchar,Firstname)+
'&url_ver=Z39.88-2004&rfr_id=info:sid/MARPS:Practicum''target=''blank'')>
Order through ILLiad</a>' ELSE URL END
FROM DocTable1 WHERE FREETEXT....
When URL is null, I don't get the string showing. It works properly only in the query analyzer.
Any ideas?
Christian
Hey guys, i'm trying to use a CASE within a select but i'm not sure how to get started.
Here is my select so far, i'm inserting into a temp table that is used within a loop to gather data from my trigger:
Code:
insert into @temp_par
select CONVERT(varchar(20),d.PAT_ID),
ep.EXT_PAT_ID,
d.DRUG_DESC_ID,
d.ALLERGY_CD,
CONVERT(varchar(20),d.PAR_DT,120),
ISNULL(d.PAR_TXT, 'NULL'),
ISNULL(REPLACE(m.DRUG_NM,'"','^"'),'NULL'),
ISNULL(m.DOSAGE_FORM_CD,'NULL'),
ISNULL(m.STRGTH,'NULL'),
ISNULL(m.STRGTH_UM,'NULL')
from deleted d --PATIENT_PRIOR_ADVERSE_REACTIONS
join EXTERNAL_PATIENT ep on ep.PAT_ID = d.PAT_ID
join MEDNAME m on m.DRUG_DESC_ID = d.DRUG_DESC_ID
I would like to use a CASE for the d.ALLERGY_CD column. The data in this column is usually a 1,2,3,4,5 but i'd like to convert those to their real data, for example:
Code:
1 = A
2 = B
3 = C
4 = D
5 = E
Any help?
Limitations: Needs to be single sql statement for exec, no udf/stored proc
Objective: select aggregate count from tblPerson grouped by s_fk, division,Desc, areaDesc with rollup for totals
if mail_goes_to=1, get the s_fk value via tblPerson/tblAffiliation/tblOrg/tblCity/tblCounty
if mail_goes_to=2, get the s_fk value via tblPerson/tblCity/tblCounty, skipping tblAffiliation/tblOrg
What's the best method? A case statement? Would a cross-join work? Thanks so much for any and all advice!
tblPerson: person_pk, affiliation_fk; home_city_fk, mail_goes_to
tblAffiliation: affiliation_pk, organization_fk
tblOrg: organization_pk, city_fk
tblCity: city_pk, county_fk
tblCounty: county_pk, s_fk
For resulting display only:
tblPersonArea: personArea_pk, area_fk, person_fk
tblArea: area_pk, areaDesc, division_fk
tblDivision: division_pk, divisionDesc
Hi,
I'm wondering what syntax to use for a select case statement.
I have a list of questions. If a particular question is on the list, then it shouldn't show some other related questions.
For example, "have you been in the military?". If you haven't , then you wouldn't be asked all the military related questions.
So- I'm saying:
select case when question_id = 488 then don't return question_id 220, 962, 963
I'm trying something like this:
select q.client_id,
case when q.question_id = 488 then end q.question_id = 220 else q.question_id = 220 end q.question_id
from questions_yes_no q
How would I say 'dont show' question 220? End is not the way to go, obviously.
If you can see what I'm trying to do, can you point me to an article or bol search?
Thank you for any help.
INSERT INTO #rpt(Hic, DtImported, Source, PlanID, LastName, FirstName, MemID, CaseStatus)
SELECT
s.Hic,
s.DtImported,
s.Source,
dbo.LastErolledPlan_C_D(s.Hic,s.IsPart_C) as PlanID,
m.LastName,
m.FirstName,
dbo.GetMemID_PartC_D(s.Hic,s.IsPart_C) as MemID,
s.CaseStatus = CASE WHEN CaseStatus ='1' or CaseStatus='0' THEN 'New'
CASE WHEN CaseStatus <>'1' or <> CaseStatus <>'0' Old
ElSE 'No Valid'
End
from tbEsccSuspects s inner join tbPDMMembers m
on s.Hic = m.HicNumber
Where s.EUFStatus = 1 -- AND DtEUFSent is NULL
what I am doing wrong in the case statment that I am getting an error. ?????
Hi,I am wondering how do I write a query that will take case sensitive into consideration. For example, I have "ABCD", "abcD", ABcd", "AbCd" in a table. I want to retrieve "AbCd" only from the table. This is the sql statement that I have:sqlSelect = "SELECT * FROM [al_table] WHERE [alphabet]= @alpha"Dim selectCmd As New SqlCommand(sqlSelect, myConnection) selectCmd.Parameters.AddWithValue("@alpha", "AbCd") From what I have it will return all those value. But that is not what I want. Thanks
View 4 Replies View RelatedHi All,
I need a hand in this script.
SELECT a.id ,value = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
,value2 = CASE
when (x1-x0) = 0 then
((Y2-Y0)-(Y1-Y0))/(0.000000001*(X2-X0))
ELSE
((-111.48277-Y0)-(Y1-Y0))/((X1-X0)*(32.72383-X0))
END
FROM table_name a
where value > 0
ORDER BY VALUE
The problem I'm having is in the where clause. Because the value is not a column name sql server is giving me an error. I need to evaluate the value returned. How can I get around this problem? Any sort of advise will help!
Thank you in advance!
Update ed_abcdeeh set category = case when name_of_school = '' then category = 'No Facility' else '' end,status = case when name_of_school = '' then status = 'Non-Compliant' else 'Compliant' end.
How to make this query right.. when name of school is blank i want to update my category to No facility, but if the name of school has data it will just make it blank. same to the status..
VFP9.0 via MySQL 5.0
Hello everybody
I have problem with CASE statement. Here is select it
Code Block
select
mev.Id
,mev.MetaElementId
,mev.ElementValue
,mev.DocumentId
,me.ElementTypeId
,castedValue =
case
when me.ElementTypeId =3 then cast(mev.ElementValue as integer)
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)
end
from dbo.tbMetaElementValue mev
inner join dbo.tbMetaElement me
on mev.MetaElementId = me.Id
where mev.MetaElementId =7
it returns
Id
MetaElementId
ElementValue
DocumentId
ElementTypeId
castedValue
49
7
2006
28
3
6/30/1905 0:00
53
7
2004
30
3
6/28/1905 0:00
61
7
2006
36
3
6/30/1905 0:00
67
7
2005
38
3
6/29/1905 0:00
70
7
2004
39
3
6/28/1905 0:00
105
7
2003
63
3
6/27/1905 0:00
166
7
2006
109
3
6/30/1905 0:00
195
7
2005
129
3
6/29/1905 0:00
220
7
2005
150
3
6/29/1905 0:00
223
7
2006
151
3
6/30/1905 0:00
As you can see it should return castedValue as integer but it cast to datetime which is wrong. If I commented line
Code Block
when me.ElementTypeId =4 then cast(mev.ElementValue as datetime)
it casts everything normal, but as soon as it has more than one condition in CASE it will choose anything but not right casting
Looks like I am missing something really fundamental. Any help is apreciated !
Thanks
I have a datetime format that comes in 'yyyy-mm-dd hh:mm:ss.nnn'
But I only want 'yyyy-mm'
I am not sure how to correctly write the select statements. Below is what I have..
How would I do this, so the datetime result is 'mmmm-yy' ....
SELECT
[RecordingDate],
[RecordedUserID],
[CombindedPercentieScore]
FROM [dbo].[scoringsummary]
WHERE convert(varchar(7), [RecordingDate],120) between convert(varchar(7), DateAdd(dd,-180,GetDate()), 120) AND convert(varchar(7), DateAdd(dd,-1,GetDate()), 120)
I have trouble converting a text field into decimals in a select statement.
The select statement is as follows:
select cast(ltrim(rtrim(units)) as decimal) as units
and I get an error message:
Msg 8114, Level 16, State 5, Line 23
Error converting data type nvarchar to numeric.
and the 'units' column contains ' 324,32 '
Trying to convert the following SELECT statement into a INSERT statement and having trouble. No doubt this will be a piece of cake to someone. To eventually get this to a trigger stage would be nice, but for the moment I'd settle for just plain SQL. Using MS SQL 2000. The database name is reporting. The table name is CallLog. I'm trying to convert seperate date (RecvdDate) and time (RecvdTime) columns into a single DateTime column. I've scoured a lot of web pages but I'm still lost.
==============
use reporting
go
SELECT RecvdDate + RecvdTime FROM [dbo].[CallLog]
===============
Any help much appreciated.
Hi, I have created a login page (webform1) that enables me to enter my user number and password and if correct it re-directs to webform 2 where all data related to the usernumber that was entered in the login page, appears. Now I want to be able to set different re-direct pages dependant upon different users as some may require more privileges then others. As for my query I have 2 types of users: staff and managers. I want to set the login page so that if staff logins in it goes webform 3 and if manager logins in it goes webform 4. My table in the Sql database is called Users & the fields are: unumber(pk), pwd, userRole, forename, surname. I have been advised to use CASE statements, yet I do not know how to use them. Below have left my code of a simple login without the userRole validation. Please help! Sub cmdLogin_ServerClick If ValidateUser(txtUserNumber.Value, txtUserPass.Value) Then Dim tkt As FormsAuthenticationTicket Dim cookiestr As String Dim ck As HttpCookie tkt = New FormsAuthenticationTicket(1, txtUserNumber.Value, DateTime.Now(), _ DateTime.Now.AddMinutes(30), chkPersistCookie.Checked, "your custom data") cookiestr = FormsAuthentication.Encrypt(tkt) ck = New HttpCookie(FormsAuthentication.FormsCookieName(), cookiestr) If (chkPersistCookie.Checked) Then ck.Expires = tkt.Expiration ck.Path = FormsAuthentication.FormsCookiePath() Response.Cookies.Add(ck) Dim strRedirect As String strRedirect = Request("ReturnURL") If strRedirect <> "" Then Response.Redirect(strRedirect, True) Else strRedirect = "webform1.aspx" Response.Redirect(strRedirect, True) End If Else Response.Redirect("webform3.aspx", True) End If End Sub
View 1 Replies View RelatedHi ALL,
How could you make the SQL Select statement query case sensitive, what i mean is i have this select statement below ...
Select * From Staff WHERE Staff.Staff_ID = 'KabirJ' AND Staff.Password = 'KaBir1!'
and a data row in the staff table that is the following information
Staff_ID Password
Kabirj kabir1!
Since the cases in database is different then in the string provided, i want sql to return me nothing, How do i go about and achieve that???????????
Thanks
Kabir
I am a junior dba not a developer. So I'm just trying to get use to write code in T-SQL.
Anyways, I have a table which is dba.dbhakyedek.
Columns are
dbname, username, class_desc, object_name, permission_name, state_desc
I have statement
select case
when class_desc='OBJECT_OR_COLUMN' then 'GRANT '+permission_name+' ON '+'['+left(object_name,3)+'].'+'['+substring(object_name,5,len(object_name))+ '] TO '+username
WHEN class_desc='DATABASE_ROLE' THEN EXEC sp_addrolemember N'object_name', N'MC'
end
from dba.dbhakyedek
where username='MC'
This statement was running successfully until exec sp_addrolemember thing. I just learned that i can't call a sp in select case but i couldnt figure out how to do it.
below is my original query
select Value = count(*) from dbo.test
I have 20 rows in dbo.test so i will get 20 as my output, now i need to write a case statement here such that when count(*) = 0 then it should display text filed 'NO Data' else it should display the count.
I need to perform an update where there are multiple scenarios which determine the value that is entered. Below is a sort've psuedo code of how it needs to be.
Update MyTable SET MyColumn = CASE WHEN MyCol1 = 'Value1' Then NewValue Else
WHEN MyCol1 <> 'Value1' And MyCol2 = 'Active' Then 'Value1'
In the scenario where MyCol1 <> Value1 and MyCol2 <> 'Active' then no update would occur and the original value would remain intact.
I am selecting the count of the students in a class by suing select COUNT(studentid) as StCount FROM dbo.student But I need to use a case statement on this like if count is less than 10 I need to return 'Small class' if the count is between 10 to 50 then I need to return 'Medium class' and if the count is more than 50 then 'Big class'.
Right now I am achieving this by the following case statement
SELECT 'ClassSize' = CASE WHEN Stcount<10 THEN 'Small Class'
WHEN Stcount>=10 and StCount<=50THEN 'Medium Class'
WHEN Stcount>50 THEN 'Big Class'
END
FROM(
select COUNT(studentid) as Stcount FROM dbo.student) Stdtbl
But can I do this with just one select statement?
Ok,I have a data warehouse that I am pulling records from using OracleSQL. I have a select statement that looks like the one below. Now whatI need to do is where the astrics are **** create a case statement orwhatever it is in Oracle to say that for this record if a 1/19/2005record exists then End_Date needs to be=1/19/2005 else getEnd_Date=12/31/9999. Keep in mind that a record could have both a1/19/2005 and 12/31/9999 instance of that account record. If 1/19exists that takes presedent if it doesnt then 12/31/9999. The problemis that the fields I pull from the table where the end_date is inquestion change based on which date I pull(12/31/9999 being the mostrecient which in some cases as you see I dont want.) so they are notidentical. This is tricky.Please let me know if you can help.SELECTCOLLECTOR_RESULTS.USER_ID,COLLECTOR_RESULTS.LETTER_CODE,COLLECTOR_RESULTS.ACCT_NUM AS ACCT_NUM,COLLECTOR_RESULTS.ACTIVITY_DATE,COLLECTOR_RESULTS.BEGIN_DATE,COLLECTOR_RESULTS.COLLECTION_ACTIVITY_CODE,COLLECTOR_RESULTS.PLACE_CALLED,COLLECTOR_RESULTS.PARTY_CONTACTED_CODE,COLLECTOR_RESULTS.ORIG_FUNC_AREA,COLLECTOR_RESULTS.ORIG_STATE_NUMBER,COLLECTOR_RESULTS.CACS_FUNCTION_CODE,COLLECTOR_RESULTS.CACS_STATE_NUMBER,COLLECTOR_RESULTS.STATE_POSITION,COLLECTOR_RESULTS.TIME_OBTAINED,COLLECTOR_RESULTS.TIME_RELEASED,COLLECT_ACCT_SYS_DATA.DAYS_DELINQUENT_NUM,sum(WMB.COLLECT_ACCT_SYS_DATA.PRINCIPAL_AMT)As PBal,FROMCOLLECTOR_RESULTS,COLLECT_ACCT_SYS_DATA,COLLECT_ACCOUNTWHERECOLLECT_ACCOUNT.ACCT_NUM=COLLECT_ACCT_SYS_DATA.ACC T_NUM(+)ANDCOLLECT_ACCOUNT.LOCATION_CODE=COLLECT_ACCT_SYS_DAT A.LOCATION_CODE(+)AND COLLECT_ACCOUNT.ACCT_NUM=COLLECTOR_RESULTS.ACCT_NU M(+)AND COLLECT_ACCOUNT.LOCATION_CODE=COLLECTOR_RESULTS.LO CATION_CODE(+)AND COLLECTOR_RESULTS.ACTIVITY_DATE =to_date(''01/19/2005'',''mm/dd/yyyy'')AND COLLECT_ACCOUNT.END_DATE = to_date(''12/31/9999'',''mm/dd/yyyy'')AND COLLECT_ACCT_SYS_DATA.END_DATE = *****************
View 1 Replies View Related