Hi. I have a stored procedure that I'm interacting with through vb.net... the stored procedure logic, by itself, runs in query analyzer, but when I run it from the code side using the stored procedure, it dies. Now, that said, I'm not a pro at writing a stored procedure, so you might look at this and gasp in horror.
I'm executing a three-staged query, all of which are using temp tables, the final of which is what I'm using for my datagrid import. The temp table name I'm using doesn't work... it's not accepted in the SP and stops the execution of the query stating "invalid table name."
Not being a guru at this, I dont know why it runs in Query Analyzer but not w/i the SP. Can someone look at this and help?
(If its grossly written and there's a better way, I wouldn't be offended to be told that either. I"m looking for ways to write cleaner, faster code)
Here is the SP, any suggestions are very very appreciated.
Thanks so much!
CREATE PROCEDURE sp_PCPPanel_Summary
(@strWHEREMale as varchar(500),
@strWHEREFemale as varchar(500))
GROUP BY Gender, RealAge, WeightedAge, FWeight, Mweight, AccountNum, PatLastName, PatFirstName,
PatAddress, patcity, patState , patZip, Tertiary, PatientStatusKey, InsClass, InsClassDesc, PCPDr, PCPClass, InsurancePlan, CarrierKey, CarrierName, PlanName, Age
ORDER BY realage
')
SELECT isnull(cast(RealAge as varchar), 'Unknown') as AgeRange, RealAge as AgeSort, gender, mweight, fweight,
[Male] = sum(case when gender = 'M' then 1 else 0 end),
[Female] = sum(case when gender = 'F' then 1 else 0 end),
count(*) as Total
into #tblTempPCP2
FROM #tblTempPCP
group by realage, gender, mweight, fweight
Select AgeRange, AgeSort, [MALE], [FEMALE],
[Male Weighted] = case when gender = 'M' then Sum(MWeight * [MALE]) end,
[Female Weighted] = case when gender = 'F' then Sum(FWeight * [FEMALE]) end
from #tblTempPCP2
group by AgeRange, AgeSort, [MALE], [FEMALE], gender, total
order by AgeSort
GO
Hi,Sorry, this is a very easy question. I have to create a storedprocedure in a SQL SERVER Database.I have read lots on MSDN about the syntax of this stored procedure :ie.CREATE PROCEDURE spGetContctDetailsAS-- get everything out of contact tableSELECT * FROM tblContactbut I cannot find anywhere how to actually add this procedure, so thatit is accessable in my VB.NET program.What I am asking is : what screen do I type this into? Is it QueryAnalyzer, if so where?Its got me oh so confused. When I've got time i'll read all about SQLServer, but for this morning I need to know how to simply add thatStored Procedure to my database.Thanks LOADS for any help.
Hi,I have a requirement to update a table in SQL Server through a storedprocedure,the stored procedure should run periodically, say once in a month, andupdate the table.I should not use any external programs to call thestored procedure, is there any other way to do it without using anexternal programs.Thanks in advance,Rajan
I am not sure if this is a correct place to post this question. i am making a simple pay bill system, require people set a schedule that pays bill, then save it into database, when the time come, it auto transfers the money, i am thinking if i can do this in a store procedure. here is the interface:From Account:To Payee:Amount:ScheduleDate: Save the schedule task View scheduled task
I have a stored procedure using UNION joins on three SQL queries. Sadly, I'm only now learning how to use Stored Procedures, so if this is a really dumb question, please forgive me. I'm not used to big UNION statements like this either... usually I'm just programming websites to serve information out pretty simply :) I need to return one result set, sorted by date... one complete result per day. eg: 5/15/2007 | XX | XX | XX | XX | XX | XX |5/16/2007 | XX | XX | XX | XX | XX | XX |5/17/2007 | XX | XX | XX | XX | XX | XX | Currently, when I run the query, I'm getting three separate date values for each date... eg:5/15/2007 | XX | XX | 00 | 00 | 00 | 00 |5/15/2007 | 00 | 00 | XX | XX | 00 | 00 |5/15/2007 | 00 | 00 | 00 | 00 | XX | XX |5/16/2007 | XX | XX | 00 | 00 | 00 | 00 |5/16/2007 | 00 | 00 | XX | XX | 00 | 00 |5/16/2007 | 00 | 00 | 00 | 00 | XX | XX |etc How do I fix this? I've looked through my query ad naseum and don't see anything that sets me off as "wrong". Here is the stored procedure if you can help. I'd really really love the help!
C R E A T E P R O C E D U R E sp_ApptActivityDate (@strWHERE as varchar(500), @strWHERECANCELED as varchar(500)) as exec ('SELECT [date] AS Date, SUM(length) AS TotalSlots, COUNT(cast(substring(appointUniqueKey, 1, 1) AS decimal)) AS TotalAppts, SUM(length * 5) / 60 AS TotalSlotHours, 0 AS TotalActiveSlots, 0 AS TotalActiveAppts, 0 AS TotalActiveSlotHours, 0 AS totalCancelSlots, 0 AS TotalCancelAppts, 0 AS TotalCancelSlotHoursFROM dbo.vw_ALL_ApptActivity ' + @strWHERE + ' UNIONSELECT [date] as DATE, 0 AS TotalSlots, 0 AS TotalAppts, 0 AS TotalSlotHours, SUM(length) AS TotalActiveSlots, COUNT(cast(substring(appointuniquekey, 1, 1) AS decimal)) AS TotalActiveAppts, SUM(length * 5) / 60 AS TotalActiveSlotHours, 0 AS totalCancelSlots, 0 AS TotalCancelAppts, 0 AS TotalCancelSlotHoursFROM dbo.vw_Active_ApptActivity' + @strWHERE + ' UNIONSELECT [date] as DATE, 0 AS TotalSlots, 0 AS TotalAppts, 0 AS TotalSlotHours, 0 AS TotalActiveSlots, 0 AS TotalActiveAppts, 0 AS TotalActiveSlotHours, SUM(length) AS totalCancelSlots, COUNT(cast(substring(AppointUniqueKey, 1, 1) AS decimal)) AS TotalCancelAppts, SUM(length * 5) / 60 AS TotalCancelSlotHoursFROM dbo.vw_CANCELED_ApptActivity ' + @strWHERECANCELED + ' ORDER BY dbo.vw_ALL_ApptActivity.[Date] ' )GO
Insert Into Table2 Select * From Table1 Where Column1Val = '4'
As you can see, I don't need any parameters so I havent configured any. Also, there should not be any result set so I shouldnt need to configure a resultset parameter.
Why is the above query failing with
Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly
Hello all .. I have a form that views the date automatically in a textbox... the date of this text box must be stored in the database after the user press the submit button ... However, I am getting a wrong date which is 01/01/1900 .. although I see it in the form as 15/01/2008 .. this is the code ... please give me a solution ASAP ..
Protected Sub SubmitButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles SubmitButton.Click 'Declaring the variablesDim objConnection As SqlConnection Dim objDataCommand As SqlCommand Dim courseId, traineeName, traineeId, department, comment1, comment2 As String Dim formDate As Date Dim RB1, RB2, RB3, RB4, RB5, RB6, RB7, RB8, RB9, RB10, RB11, RB12, RB13, RB14 As String Dim ConnectionString, evaluationSQL, TraSQL, iTotal As String 'Save form values in variables formDate = Convert.ToDateTime(DateTxt.Text) courseId = CourseIDTxt.Text traineeId = EmailTxt.Text traineeName = TraineeNTxt.Text department = DeptDropDownList.SelectedValue RB1 = RBL1.SelectedValue RB2 = RBL2.SelectedValue RB3 = RBL3.SelectedValue RB4 = RBL4.SelectedValue RB5 = RBL5.SelectedValue RB6 = RBL6.SelectedValue RB7 = RBL7.SelectedValue RB8 = RBL8.SelectedValue RB9 = RBL9.SelectedValue RB10 = RBL10.SelectedValue RB11 = RBL11.SelectedValue RB12 = RBL12.SelectedValue RB13 = RBL13.SelectedValue RB14 = RBL14.SelectedValue comment1 = CommentTxt1.Text comment2 = CommentTxt2.TextConnectionString = WebConfigurationManager.ConnectionStrings("GRPConnectionString").ConnectionString 'Create and open the connection objConnection = New SqlConnection(ConnectionString) objConnection.Open()evaluationSQL = "Insert into Evaluation (Eva_Date, CourseD_Id, Tra_Id , Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Comment1, Comment2 ) " & _ "values(" & formDate & ",'" & courseId & "','" & traineeId & "','" & RB1 & "','" & RB2 & "','" & RB3 & "','" & RB4 & "','" & RB5 & "','" & RB6 & "','" & RB7 & "','" & RB8 & "','" & RB9 & "','" & RB10 & "','" & RB11 & "','" & RB12 & "','" & RB13 & "','" & RB14 & "','" & comment1 & "','" & comment2 & "')"objDataCommand = New SqlCommand(evaluationSQL, objConnection) objDataCommand.ExecuteNonQuery()
Hi sir , That is my Stored pro. which search in Sales table . - I do NOT know which parameters will be sent and which will be null. - I write sqlString which dynamically changed based on which parameters sent.
Here is my code:
Code Snippet SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO Alter PROCEDURE SearchInSales @ID bigint, @AmmountPaid bigint, @AmmountDelayed bigint, @Quantity bigint AS BEGIN
SET NOCOUNT ON; Declare @sqlStr nvarchar(200) set @sqlStr='SELECT * FROM Sales WHERE '
if @ID is not null
set @sqlStr = @sqlStr + 'ID = ' + cast(@ID as nvarchar(50)) else
BEGIN
if @AmmountPaid is not null
set @sqlStr = @sqlStr + 'AmmountPaid = ' + cast(@AmmountPaid as nvarchar(50)) if @AmmountDelayed is not null
BEGIN
if len(@sqlStr)>25 -- check if @sqlStr has any of pre. conditions set @sqlStr = @sqlStr + ' AND ' set @sqlStr = @sqlStr + 'AmmountDelayed = ' + cast(@AmmountDelayed as nvarchar(50)) END if @Quantity is not null
BEGIN
if len(@sqlStr)>25 -- check if @sqlStr has any of pre. conditions set @sqlStr = @sqlStr + ' AND ' set @sqlStr = @sqlStr + 'Quantity = ' + cast(@Quantity as nvarchar(50)) END END
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie exec dbo.DeriveStatusID 'Created' returns an int value as 1 (performed by "SELECT statusID FROM statusList WHERE statusName= 'Created') but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie: exec dbo.AddProduct_Insert 'widget1' which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) I want to simply the insert to perform (in one sproc): SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID) This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example). My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert). Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hello All,I tried to set the access permissions for debugging stored procedure by reading the articlehttp://msdn2.microsoft.com/en-us/library/w1bhybwz(VS.80).aspxandhttp://technet.microsoft.com/en-us/library/ms164014.aspxI have tried to add the role to sysaminas follows1)SELECT * FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_NAME = 'sp_sdidebug'(to find the sp)Error:--The stored procedure not found2)sp_addsrvrolemember 'Developmentswati.jain', 'sysadmin' though this is executed successfuly . Error is still persisting Cannot debug stored procedures because the SQL Server database is not setup correctly or user does not have permission to execute master.sp_sdidebug.
I executed them and got the following results in SSMSE: TopSixAnalytes Unit AnalyteName 1 222.10 ug/Kg Acetone 2 220.30 ug/Kg Acetone 3 211.90 ug/Kg Acetone 4 140.30 ug/L Acetone 5 120.70 ug/L Acetone 6 90.70 ug/L Acetone ///////////////////////////////////////////////////////////////////////////////////////////// Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming: //////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class ///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors: Error #1: Type 'SqlConnection' is not defined (in Form1.vb) Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb) Error #3: Array bounds cannot appear in type specifiers (in Form1.vb) Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance, Scott Chang
More Information for you to know: I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly. I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
I have a sub that passes values from my form to my stored procedure. The stored procedure passes back an @@IDENTITY but I'm not sure how to grab that in my asp page and then pass that to my next called procedure from my aspx page. Here's where I'm stuck: Public Sub InsertOrder() Conn.Open() cmd = New SqlCommand("Add_NewOrder", Conn) cmd.CommandType = CommandType.StoredProcedure ' pass customer info to stored proc cmd.Parameters.Add("@FirstName", txtFName.Text) cmd.Parameters.Add("@LastName", txtLName.Text) cmd.Parameters.Add("@AddressLine1", txtStreet.Text) cmd.Parameters.Add("@CityID", dropdown_city.SelectedValue) cmd.Parameters.Add("@Zip", intZip.Text) cmd.Parameters.Add("@EmailPrefix", txtEmailPre.Text) cmd.Parameters.Add("@EmailSuffix", txtEmailSuf.Text) cmd.Parameters.Add("@PhoneAreaCode", txtPhoneArea.Text) cmd.Parameters.Add("@PhonePrefix", txtPhonePre.Text) cmd.Parameters.Add("@PhoneSuffix", txtPhoneSuf.Text) ' pass order info to stored proc cmd.Parameters.Add("@NumberOfPeopleID", dropdown_people.SelectedValue) cmd.Parameters.Add("@BeanOptionID", dropdown_beans.SelectedValue) cmd.Parameters.Add("@TortillaOptionID", dropdown_tortilla.SelectedValue) 'Session.Add("FirstName", txtFName.Text) cmd.ExecuteNonQuery() cmd = New SqlCommand("Add_EntreeItems", Conn) cmd.CommandType = CommandType.StoredProcedure cmd.Parameters.Add("@CateringOrderID", get identity from previous stored proc) <------------------------- Dim li As ListItem Dim p As SqlParameter = cmd.Parameters.Add("@EntreeID", Data.SqlDbType.VarChar) For Each li In chbxl_entrees.Items If li.Selected Then p.Value = li.Value cmd.ExecuteNonQuery() End If Next Conn.Close()I want to somehow grab the @CateringOrderID that was created as an end product of my first called stored procedure (Add_NewOrder) and pass that to my second stored procedure (Add_EntreeItems)
I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure
at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT
I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT
I have a stored procedure that calls a msdb stored procedure internally. I granted the login execute rights on the outer sproc but it still vomits when it tries to execute the inner. Says I don't have the privileges, which makes sense.
How can I grant permissions to a login to execute msdb.dbo.sp_update_schedule()? Or is there a way I can impersonate the sysadmin user for the call by using Execute As sysadmin some how?
Has anyone encountered cases in which a proc executed by DTS has the following behavior: 1) underperforms the same proc when executed in DTS as opposed to SQL Server Managemet Studio 2) underperforms an ad-hoc version of the same query (UPDATE) executed in SQL Server Managemet Studio
What could explain this?
Obviously,
All three scenarios are executed against the same database and hit the exact same tables and indices.
Query plans show that one step, a Clustered Index Seek, consumes most of the resources (57%) and for that the estimated rows = 1 and actual rows is 10 of 1000's time higher. (~ 23000).
The DTS execution effectively never finishes even after many hours (10+) The Stored procedure execution will finish in 6 minutes (executed after the update ad-hoc query) The Update ad-hoc query will finish in 2 minutes
I am trying to debug stored procedure using visual studio. I right click on connection and checked 'Allow SQL/CLR debugging' .. the store procedure is not local and is on sql server.
Whenever I tried to right click stored procedure and select step into store procedure> i get following error
"User 'Unknown user' could not execute stored procedure 'master.dbo.sp_enable_sql_debug' on SQL server XXXXX. Click Help for more information"
I am not sure what needs to be done on sql server side
We tried to search for sp_enable_sql_debug but I could not find this stored procedure under master.
Some web page I came accross says that "I must have an administratorial rights to debug" but I am not sure what does that mean?
I have a stored procedure 'ChangeUser' in which there is a call to another stored procedure 'LogChange'. The transaction is started in 'ChangeUser'. and the last statement in the transaction is 'EXEC LogChange @p1, @p2'. My questions is if it would be correct to check in 'LogChange' the following about this transaction: 'IF @@trancount >0 BEGIN Rollback tran' END Else BEGIN Commit END. Any help on this would be appreciated.
Hi,I am getting error when I try to call a stored procedure from another. I would appreciate if someone could give some example.My first Stored Procedure has the following input output parameters:ALTER PROCEDURE dbo.FixedCharges @InvoiceNo int,@InvoiceDate smalldatetime,@TotalOut decimal(8,2) outputAS .... I have tried using the following statement to call it from another stored procedure within the same SQLExpress database. It is giving me error near CALL.CALL FixedCharges (@InvoiceNo,@InvoiceDate,@TotalOut )Many thanks in advanceJames
I have a store procedure (e.g. sp_FetchOpenItems) in which I would like to call an existing stored procedure (e.g. sp_FetchAnalysts). The stored proc, sp_FetchAnalysts returns a resultset of all analysts in the system. I would like to call sp_FetchAnalysts from within sp_FetchOpenItems and insert the resultset from sp_FetchAnalysts into a local temporary table. Is this possible? Thanks, Kevin
IF (@i_WildCardFlag=0)BEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (Batch.BatchID = @V_BatchID )) AND ((@V_UserID IS NULL) OR (Batch.Created_By = @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END ELSEBEGIN SET @SQLString='SELECT Batch.BatchID, Batch.Created_By, Batch.RequestSuccessfulRecord_Count, Batch.ResponseFailedRecord_Count, Batch.RequestTotalRecord_Count, Batch.Request_Filename, Batch.Response_Filename, Batch.LastUpdated_By, Batch.LastUpdated, Batch.Submitted_By, Batch.Submitted_On, Batch.CheckedOut_By, Batch.Checked_Out_Status, Batch.Batch_Description, Batch.Status_Code, Batch.Created_On, Batch.Source, Batch.Archived_Status, Batch.Archived_By, Batch.Archived_On, Batch.Processing_Mode, Batch.Batch_TemplateID, Batch.WindowID,Batch.WindowDetails, BatchTemplate.Batch_Type, BatchTemplate.Batch_SubType FROM Batch INNER JOIN BatchTemplate ON Batch.Batch_TemplateID = BatchTemplate.Batch_TemplateID WHERE ((@V_BatchID IS NULL) OR (isnull (Batch.BatchID, '''') LIKE @SSS )) AND ((@V_UserID IS NULL) OR (isnull (Batch.Created_By , '''') LIKE @V_UserID )) AND ((Batch.Created_On >= @V_FromDateTime ) AND (Batch.Created_On <= @V_ToDateTime )) AND Batch.Archived_Status = 1 ' if (@V_BatchStatus IS not null) begin set @SQLString=@SQLString + ' AND (Batch.Status_Code in ('+@V_BatchStatus+'))' end if (@V_BatchType IS not null) begin set @SQLString=@SQLString + ' AND (BatchTemplate.Batch_Type in ('+@V_BatchType+'))' end END PRINT @SQLString SET @ParmDefinition = N' @V_BatchStatus Varchar(30), @V_BatchType VARCHAR(50), @V_BatchID NUMERIC(9), @V_UserID CHAR(8), @V_FromDateTime DATETIME , @V_ToDateTime DATETIME, @SSS varchar(500)' EXECUTE sp_executesql @SQLString, @ParmDefinition, @V_BatchStatus , @V_BatchType , @V_BatchID, @V_UserID , @V_FromDateTime , @V_ToDateTime , @SSS GO SET QUOTED_IDENTIFIER OFF GOSET ANSI_NULLS ON GO
The above stored procedure is related to a search screen where in User is able to search from a variety of fields that include userID (corresponding column Batch.Created_By) and batchID (corresponding column Batch.BatchID). The column UserID is a varchar whereas batchID is a numeric. REQUIREMENT: The stored procedure should cater to a typical search where any of the fields can be entered. meanwhile it also should be able to do a partial search on BatchID and UserID.
I have a stored procedure that among other things needs to get a total of hours worked. These hours are totaled by another stored procedure already. I would like to call the totaling stored procedure once for each user which required a loop sort of thing for each user name in a temporary table (already done) total = result from execute totaling stored procedure Can you help with this Thanks
IF @@ERROR = 0 BEGIN -- Success. Commit the transaction. Commit Tran END ELSE Rollback Tran
return GO
now the problem is, when i execute the stored procedure's inside the main stored procedure, and these sub sp's has an error on it, the main stored procedure doesnt rollback the transation.
now i can put the "begin transation" in the two sub stored procedure's. The problem is
what if the first "SP_Sub_One" executed successfully, and there was error in "SP_Sub_Two"
now the "SP_Sub_One" has been executed and i cant rollback it... the error occured in the "SP_Sub_Two" stored procedure ... so it wont run ... so there will be error in the data
how can i make a mian "BEGIN TRANSACTION" , that even it include the execution of stored procedure in it.
When I am trying to call a function I made from a stored procedure of my creation as well I am getting:
Running [dbo].[DeleteSetByTime].
Cannot find either column "dbo" or the user-defined function or aggregate "dbo.TTLValue", or the name is ambiguous.
No rows affected.
(0 row(s) returned)
@RETURN_VALUE =
Finished running [dbo].[DeleteSetByTime].
This is my function:
ALTER FUNCTION dbo.TTLValue
(
)
RETURNS TABLE
AS
RETURN SELECT Settings.TTL FROM Settings WHERE Enabled='true'
This is my stored procedure:
ALTER PROCEDURE dbo.DeleteSetByTime
AS
BEGIN
SET NOCOUNT ON
DECLARE @TTL int
SET @TTL = dbo.TTLValue()
DELETE FROM SetValues WHERE CreatedTime > dateadd(minute, @TTL, CreatedTime)
END
CreatedTime is a datetime column and TTL is an integer column.
I tried calling it by dbo.TTLValue(), dbo.MyDatabase.TTLValue(), [dbo].[MyDatabase].[TTLValue]() and TTLValue(). The last returned an error when saving it "'TTLValue' is not a recognized built-in function name". Can anybody tell me how to call this function from my stored procedure? Also, if anybody knows of a good book or site with tutorials on how to become a pro in T-SQL I will appreciate it.
Hello, I am hoping there is a solution within SQL that work for this instead of making round trips from the front end. I have a stored procedure that is called from the front-end(USP_DistinctBalancePoolByCompanyCurrency) that accepts two parameters and returns one column of data possibly several rows. I have a second stored procedure(USP_BalanceDateByAccountPool) that accepts the previous stored procedures return values. What I would like to do is call the first stored procedure from the front end and return the results from the second stored procedure. Since it's likely I will have more than row of data, can I loop the second passing each value returned from the first? The Stored Procs are: CREATE PROCEDURE USP_DistinctBalancePoolByCompanyCurrency @CID int, @CY char(3) AS SELECT Distinct S.BalancePoolName FROM SiteRef S INNER JOIN Account A ON A.PoolId=S.ID Inner JOIN AccountBalance AB ON A.Id = AB.AccountId Inner JOIN AccountPool AP On AP.Id=A.PoolId Where A.CompanyId=@CID And AB.Currency=@CY
CREATE PROCEDURE USP_BalanceDateByAccountPool @PoolName varchar(50) AS Declare @DT datetime Select @DT= (Select MAX(AccountBalance.DateX) From Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName) SELECT SiteRef.BalancePoolName, AccountBalance.DateX, AccountBalance.Balance FROM Company Company INNER JOIN Account Account ON Company.Id = Account.CompanyId INNER JOIN SiteRef SiteRef ON Account.PoolId = SiteRef.ID Inner JOIN AccountBalance AccountBalance ON Account.Id = AccountBalance.AccountId WHERE SiteRef.BalancePoolName = @PoolName And AccountBalance.DateX = @DT Order By AccountBalance.DateX DESC
Any assistance would be greatly appreciated. Thank you, Dave
Is it possible to execute a stored procedure in one database, which thenitself executes a stored procedure from another database? We have decide tosplit our data into a tree structure (DB1) and data blobs (DB2) (we areusing MSDE and we have a 2gb limit with each DB so we've done it this wayfor that reason). I would like to, say, execute a stored procedure in DB1,passing in the data blob and other details, DB1 will create a tree node inDB1 and then add the blob record to DB2. DB1 will wrap in a transaction ofcourse, as will DB2 when it adds the blob. Is this possible?
Hi everybody, I am having trouble how to fixed this code. I am trying to supply the parameterinside a stored procedure with a value, and displays error message shown below. If I did not supply the parameter with a value, it works. How to fix this?Error Message:Procedure or function <stored proc name> has too many arguments specified.Thanks,den2005 Stored procedure:
Alter PROCEDURE [dbo].[sp_GetIdeaByCategory] @CatId <span class="kwd">int</span> = 0 AS BEGIN SET NOCOUNT ON;
Select I.*, C.*, U.* From Idea I inner join IdeaCategory C on I.CategoryID = C.IdeaCategoryID inner join Users U on I.UserID = U.UserID Where I.CategoryID = @CatId Order By LastModifiedDate Desc End
Can someone help me with this issue? I am trying to update a record using a sp. The db table has an identity column. I seem to have set up everything correctly for Gridview and SqlDataSource but have no clue where my additional, phanton arguments are being generated. If I specify a custom statement rather than the stored procedure in the Data Source configuration wizard I have no problem. But if I use a stored procedure I keep getting the error "Procedure or function <sp name> has too many arguments specified." But thing is, I didn't specify too many parameters, I specified exactly the number of parameters there are. I read through some posts and saw that the gridview datakey fields are automatically passed as parameters, but when I eliminate the ID parameter from the sp, from the SqlDataSource parameters list, or from both (ID is the datakey field for the gridview) and pray that .net somehow knows which record to update -- I still get the error. I'd like a simple solution, please, as I'm really new to this. What is wrong with this picture? Thank you very much for any light you can shed on this.
On SQL 2012 (64bit) I have a CLR stored procedure that calls another, T-SQL stored procedure.
The CLR procedure passes a sizeable amount of data via a user defined table type resp.table values parameter. It passes about 12,000 rows with 3 columns each.
For some reason the call of the procedure is verz very slow. I mean just the call, not the procedure.
I changed the procdure to do nothing (return 1 in first line).
So with all parameters set from
command.ExecuteNonQuery()to create proc usp_Proc1 @myTable myTable read only begin return 1 end
it takes 8 seconds.I measured all other steps (creating the data table in CLR, creating the SQL Param, adding it to the command, executing the stored procedure) and all of them work fine and very fast.
When I trace the procedure call in SQL Profiler I get a line like this for each line of the data table (12,000)
SP:StmtCompleted -- Encrypted Text.
As I said, not the procedure or the creation of the data table takes so long, really only the passing of the data table to the procedure.
