Need Help On Lookup Transform
Jun 25, 2007Please suggest me an article that describes 'Lookup Transform' (Specifically passing parameters) in detail.
Note: Is it possible to pass "variable" as parameters in Lookup transform?
ADVERTISEMENT
Need Help With LOOKUP Transform
Aug 22, 2007I have a very simple problem I am trying to solve.
I have a table with a "DateEntered" field, and I have an ssis pkg set up to load data from a file into the database table. I just want to make sure that no one loads the same file twice in one day.
For example, if today is 8/22/07, and "DateEntered" is "2007-08-22", then I want to add a Lookup transform to run a query that will check and see if there's any rows in the table with a "DateEntered" is "2007-08-22". If so, don't load the file again!
Here's my query:
SELECT Code
FROM myTable
WHERE DATEADD(dd, DATEDIFF(dd, 0, DateEntered), 0) = DATEADD(dd, DATEDIFF(dd, 0, GETDATE()), 0)
(all the dateadd stuff is doing is removing the time portion from the DateEntered field, so we are comparing apples to apples).
Now, if the query returns a bunch of "Codes" then we know that the data has already been entered for the day! So far, so good.
Now, how do I set up the Lookup to get it to work? I'm getting this error message:
Error 1 Validation error. Data Flow Task: Lookup [1299]: The lookup transform must contain at least one input column joined to a reference column, and none were specified. You must specify at least one join column. FXRateLoader.dtsx 0 0
But I thought I did this! On the columns tab, I have:
Lookup column: code
Lookup operation: Replace 'code'
Output alias: code
I have my error output set to:
Lookup output - redirect row
I don't know what I'm doing, obviously..........!
Need assistance :-)
Lookup Transform
Jan 24, 2007Hi!
I am a newbie, grateful for some help. I have a Source Ole DB w sql-command selecting the customer.salary and customer.occupation, which I want to match with demo_id in Ole DB destination.
salary, occupation also in dim_demographic.
But in Lookup editor I find no column demo_id... how do I do this?
LookUP Transform...
Apr 16, 2007Dear friends,
I have a ETL that have a Lookup transform to get a rate from a table SpotRates.
The problem is when the match od some date in SpotRates Table doens't exist...
And for that records I need to lookup for next date...
For example...
SpotRate Table
Date
Currency
Rate
05-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2262
06-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2312
07-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2179
10-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2099
11-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2105
12-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2125
13-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2094
18-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2252
19-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2346
20-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2346
21-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2315
24-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2365
25-04-2006 0:00
DOLAR ESTADOS UNIDOS
1,2425
When I first try to lookup the date 17-04-2006, doesnt give me any records... and I need to create a new lookup for the next date from 17-04-2006. And in this example the next date is 18-04-2006.. How can I do it??
I made a sql query date gives me the next date with 2 parameters ... but I'm having some errors...
SELECT TOP 1 Data
FROM Spot_Rates
WHERE (Currencies_Name = ?) AND (Data > CONVERT(DATETIME, ?, 102))
ORDER BY Data DESC
In this exampple, the parameters returned from lookup1 is:
Currencies_name= 'DOLAR ESTADOS UNIDOS'
DATE='17-04-2006'
I need to create a second lookup transform to return the next date/currency for each row that didnt match in the first lookup...
Regards,
Pedro
Lookup Transform
Aug 10, 2007I want to do something relatively simple with SSIS but can't find an easy way to do this (isint it always the case with SSIS )
I have a column lets say called iorg_id, and I want to lookup the matching rows for this col in a table.
In this table iorg_id may have several potential matching rows. In this table there is another col called 'Amount'.
I want to retrieve for each iorg_id the matching iorg_id in the other table but only the row with the largest value in the 'Amount' col.
I couldn't find a way to do this all in the Lookup Transform.
I can match the iorg_ids and retrieve the Amount column, but can't find a way just to retrieve the matching row with the largest value in the Amount col. The only way I can think to do this is then run the output from the Transform through an Aggregate function and determine the Max (although haven't tested this yet).
Seems strange to me in that the SQL in the Advanced tab gives me something like:
select * from
(select * from [dbo].[Table1]) as refTable
where [refTable].[iorg_id] = ?
where I believe the first 'select *' is retrieving all the cols that are listed in the LookupColumns list in the Columns tab.
I thought I would be able to amend this to something like:
select max(amount) from
(select * from [dbo].[Table1]) as refTable
where [refTable].[iorg_id] = ?
but I get a metadata type error.
So, questions are:
Is it possible to do this all in the Lookup Transform are do I have to use the Aggregate function as I think ?
Why is it not possible to amend the sql in the Advanced tab to manipulate the returned data ?
Lookup Transform + Composite Key
Oct 27, 2007I am trying to digest this logic, and have been unsuccessful so far. I am designing a package for incremental loads, but the destination table has a composite primary key on 2 columns, one of which is nullable. The source data comes from a SPROC. Uptill now, I have been banging my head trying to get this logic to work via the Lookup transform with a conditional split, but it doesn't work. Am I on the right track, or should I be using the SCD Wizard?
As a side note, I have been trying to work a solution using Andrew's blogpost on doing incremental loads: http://sqlblog.com/blogs/andy_leonard/archive/2007/07/09/ssis-design-pattern-incremental-loads.aspx
Thanks.
Lookup Transform With Multiple Matches
Aug 3, 2007Please indulge my ignorance, as I have only been using SSIS for a couple of weeks.
I'm trying to create a data warehouse using two input tables.
A column needs to be added to one table by using a lookup into the second table.
SSIS seems to handle the "no matches" and "single match" cases perfectly.
I can't for the life of me figure out how to properly handle multiple matches.
SSIS defaults to the first match, but I need to compute the "best" match.
Many thanks in advance
Scott!
Lookup Transform With Variable Parameter
Jun 8, 2006Is it possible to use a VARIABLE in the Lookup Transform? I am setting the cache mode to partial and have modified the caching SQL statement on the advanced tab to include the parameterized query, but the parameter button only allows me to select columns to map to the parameter. I need to use a variable instead. I see the ParameterMap property of the transform in the advanced editor, but don't see how I can use this to map to a variable.
Can this be done, or do I need to use a new source, sort and left join component to accomplish the same thing?
Thanks!
Brandon
Programmatically Create A Lookup Transform
Oct 31, 2006Hi,
i'm creating a Lookup programmatically. But i can't find out how to assign the ConnectionManager that references the lookup data.
Do you have an example for me?
Many thanks in advance.
Stefan L.
Error In Lookup Transform (Advice Please!!)
May 14, 2008Hi,
I get the following error when
i configure the lookup transform in the data flow task "Input column has a data type that cannot be matched".
This is the query that i use to set the reference table dataset
select firstname, lastname, address, email from customers_dimension cd , cust_test ct where cd.address<>ct.address.
I basically want to try and find all those records that have the same firstname, lastname, email in the customer dimension table where the records do not match. Both the input fields and the lookup fields have the same data type [varchar(max)].
It is pretty confusing, so much so that i did the lookup against the exact same table and got the same error.
Does anyone have a better idea as to what the problem is?
Thankyou
P.S.-This is the caching statement in the advanced tab
select * from
(SELECT firstName
FROM Customers_Dimension) as refTable
where [refTable].[firstName] = ?
Lookup Transform Error When Linking Using A DT_R8
Oct 25, 2005I'm trying to lookup a value in another table linking on a column of datatype DT_R8. The lookup transform is complaining that I can't link on that datatype. However, the documentation says that it should work. I'm using the April CTP. Is this fixed in a later version? Any suggestions?
View 6 Replies View RelatedLookup Transform Not Finding Blank Match
Mar 14, 2006I am having problems with a lookup transformation. I have a row in my lookup table for blank ('') source data. If I test the join using SQL the match is made, but the Lookup transform doesn't consider it a match and sends it to error output. Is there a property that I don't have set correctly or something else I am forgetting?
View 5 Replies View RelatedLookup Transform Still Cannot Find Empty String Matches
Nov 24, 2007Has anyone find solution for this problem.
i also checked
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=298056&SiteID=1 and
http://blogs.conchango.com/kristianwedberg/archive/2006/02/22/2955.aspx
Suppose have a Dimension table
DimColor
----------------------------
ColorKeyPK(smallint) ColorAlternateKey(nvarchar(30))
-1 UnknownMember
1
2 Blue
3 Red
4 Black
Color with the ID 1 is empty string
FactOrders
---------------------------
OrderID Date Color Quantity
OrderID = 1 Color = 'Black' Quantity = 10
OrderID = 2 Color = 'Red' Quantity = 20
OrderID = 3 Color = '' Quantity = 10
OrderID = 4 Color = 'Blue' Quantity = 5
OrderID = 5 Color = Black Quantity = 10
When i use the Lookup transform it cannot find the ColorKeyPK
The result of the Lookup transform is.
------------------------------
OrderID = 1 Color='Black' ColorKey=4
OrderID = 2 Color='Black' ColorKey=3
OrderID = 3 Color='Black' ColorKey=NULL ----> This is the problem Lookup cannot find empty string. It should be 1.
OrderID = 4 Color='Black' ColorKey=2
OrderID = 5 Color='Black' ColorKey=4
Thanks from now.
Integration Services :: Lookup Transform Partial Cache
Sep 6, 2010I've a simple lookup transform in SSIS 2008 (R2). I've created it with a full cache and it worked fine. When i switch to partial cache, it will give me this error:
--------------------------------------------------------------------------------------------------
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at DFT_AdventureWorks [Lookup [411]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[Code] ....
I've created a OLE source with the following query :
SELECT
SalesOrderID,
OrderDate,
CustomerID
FROM Sales.SalesOrderHeader
And this will flow into the lookup transform and this has the following lookup reference query:
SELECT CustomerID,
AccountNumber
FROM Sales.Customer
WHERE CustomerID % 7 <>0
Lookup Transform - Incompatible Data Types Mistery
Jul 10, 2007I have a package that works fine in development. I move the package over to test and it fails validation in the lookup transform.
Error 46 Validation error. Data Flow Task - PO Lines Interface: Lookup - LIST PRICE [29621]: output column "LIST_PRICE_PER_UNIT" (29667) and reference column named "LIST_PRICE_PER_UNIT" have incompatible data types. SPO_TO_ORACLE_PO.dtsx 0 0
What strikes me as odd is the fact that I don't have a way of specifying the data types. I just specify the column I wish to return as a new column with the same name. Anyway, why would this work in one instance but not another?
thanks
John
Lookup Transform Issuing One Select Statement Per Input Row
Oct 20, 2007I am using the lookup transform with the following settings:
Reference table: Use results of an SQL query. The query retrieves the surrogate key and four business key columns from a dimension table which contains a few thousand rows.
Columns: business keys in the incoming data are mapped to the business keys in the reference table, and the surrogate key is looked up from the reference table.
Advanced: Enable memory restriction is OFF (and the other items on the Advanced tab are greyed out).
I assumed that this means that the lookup transform would cache all of the rows in the SQL query, and then perform the lookups against this cache. This is the behaviour that I saw when I was running the package in my local environment in the BIDS debugger.
However, a colleague was doing some profiling on our production database server, and noticed that the lookup transform is instead issuing a single SQL query for each row of input. Our production ETL server has many GBs of free RAM available (way more than enough to cache the contents of the lookup table in memory), and given that memory restriction is disabled, I don't understand why the lookup transform is behaving in this fashion. Does anyone have an explanation for this? I'm probably misunderstanding a key concept here.
Thanks,
Greg
Accessing A Lookup Table From Inside A Transform Script Component
Feb 6, 2007
I have a requirement to access a lookup table from within an SSIS Transform Script Component
The aim is to eliminate error characters from within the firstname, lastname, address etc. fields by doing a lookup of an ASCII code reference table and making an InStr() type comparison.
I cannot find a way of opening the reference data set from withing the transform.
Regards
Tim
Integration Services :: SSIS Cache Transform Lookup With Multiple Indexes
Jan 16, 2013I work in the healthcare area, and am handling the survey data ETL's. There are around 8 different survey areas and based on information received from them for the visit they reference, I want to pull in more info from our invoicing database. My idea is this:
1.) Pull in the flat file to an ODBC staging table
2.) Cache all invoice records that fall between the MIN(Date of Service) and MAX(Date of Service) from the staging table.
3.) First lookup the information needed on patientID, providerID, date of service, and billing location.
4.) For the surveys that didn't match on those 4 columns, try looking up based on patientID, date of service, and billing location (since I could be 99% sure this would still return the record I need).
5.) For the remaining surveys, lookup based just on patientID and date of service. These records will be flagged for manual review because clearly, if a patient has multiple appointments in the same day, this will be prone to error.
However, in trying to use only 3 of the columns in the lookup, I get the error saying basically that I need to utilize all 4. Is there a way around this, or is there an entirely different way I should be approaching this? The reason I thought cache transform was the answer is because I will need to run a different package for each lookup, as the data and logic between each survey will vary, but the invoice data "pool" will stay the same regardless.
Behavior Of SSIS Lookup Transform On Full Cache Setting With Low Computer Memory
Aug 9, 2007
I would like to know what happens when a very large reference data set for a lookup transform with full caching enabled is getting loaded during package execution and the computer memory runs out or is very low.
Does SSIS
a) give an out of memory error of some sort
b) resort to a no caching or partial caching mode
c) maintain the full caching mode but will switch to using the paging file(virtual memory).
I think it will resort to using the page file in which case the benefits of in memory lookups are lost and performance would suffer. If I cannot upgrade the memory or shrink the reference set somehow, i should switch that lookup task to use partial caching or no caching with an indexed lookup table. Would this make sense?
Integration Services :: SSIS 2012 Lookup Transform Converts Date Field To String
Jul 30, 2015We are using lookup transformation in SSIS 2012. The lookup transformation queries a table with two date columns. When we hover the mouse over the two columns in the 'columns' tab of the lookup transformation editor, the two columns show as DT_WSTR instead of DT_DBDATE. This causes the SSIS package to fail due to data type mismatch.A similar abandoned thread is available at: URL....
View 2 Replies View RelatedFuzzy Lookup Transform Row Scores 'inconsistent' With Individual Column Scores
Sep 1, 2006I am trying to interpret some of the results I observe when trying to match similar records using a fuzzy lookup transform, but it's not entirely clear how the overall row similarity score is calculated. In particular, sometimes rows with lower individual column similarity scores will achieve a higher similarity and confidence score than a matching row with higher individual column scores.
The transform is configured with 6 text fields set to fuzzy mapping and a minimum similarity of 0, and 3 additional numeric fields with an exact mapping. It is set to return a maximum of 2 matches per lookup and to do an exhaustive search of the reference table.
For example, from the following matching pair of records Match 1 is picked over Match 2 even though it's individual scores are lower.
Match 1 Match 2
----------------- -----------------
_similarity_author 1.0 1.0
_similarity_title 0.85344648 1.0
_similarity_headline 0.0125 0.0125
_similarity_summary 0.0125 0.0125
_similarity_picture 1.0 1.0
_similarity_caption 1.0 1.0
_similarity 7.8429267E-2 7.3196657E-2
_confidence 0.55728668 0.44271332
In another case both matching records have *identical* scores for every mapped column and yet their similarity and confidence scores are different.
Clearly there are other factors involved in calculating the overall row score. Anybody know what these are?
Fernando Tubio
Performance Expectations For Fuzzy Lookup Against 25mill Row Lookup Table
Oct 31, 2007We did some "at scale" fuzzy lookup tests today and were rather disappointed with the performance. I'm wanting to know your experience so I can set my performance expectations appropriately.
We were doing a fuzzy lookup against a lookup table with 25 million rows. Each row has 11 columns used in the fuzzy lookup, each between 10-100 chars. We set CopyReferenceTable=0 and MatchIndexOptions=GenerateAndPersistNewIndex and WarmCaches=true. It took about 60 minutes to build that index table, during which, dtexec got up to 4.5GB memory usage. (Is there a way to tell what % of the index table got cached in memory? Memory kept rising as each "Finished building X% of fuzzy index" progress event scrolled by all the way up to 100% progress when it peaked at 4.5GB.) The MaxMemoryUsage setting we left blank so it would use as much as possible on this 64-bit box with 16GB of memory (but only about 4GB was available for SSIS).
After it got done building the index table, it started flowing data through the pipeline. We saw the first buffer of ~9,000 rows get passed from the source to the fuzzy lookup transform. Six hours later it had not finished doing the fuzzy lookup on that first buffer!!! Running profiler showed us it was firing off lots of singelton SQL queries doing lookups as expected. So it was making progress, just very, very slowly.
We had set MinSimilarity=0.45 and Exhaustive=False. Those seemed to be reasonable settings for smaller datasets.
Does that performance seem inline with expectations? Any thoughts to improve performance?
Fuzzy Lookup Error When Adding Additional Lookup Columns
Sep 26, 2007I'm working with an existing package that uses the fuzzy lookup transform. The package is currently working; however, I need to add some columns to the lookup columns from the reference table that is being used.
It seems that I am hitting a memory threshold of some sort, as when I add 3 or 4 columns, the package works, but when I add 5 columns, the fuzzy lookup transform fails pre-execute:
Pre-Execute
Taking a snapshot of the reference table
Taking a snapshot of the reference table
Building Fuzzy Match Index
component "Fuzzy Lookup Existing Member" (8351) failed the pre-execute phase and returned error code 0x8007007A.
These errors occur regardless of what columns I am attempting to add to the lookup list.
I have tried setting the MaxMemoryUsage custom property of the transform to 0, and to explicit values that should be much more than enough to hold the fuzzy match index (the reference table is only about 3000 rows, and the entire table is stored in less than 2MB of disk space.
Any ideas on what else could be causing this?
Reporting Services :: SSRS Lookup - Can Use More Than One Field When Doing Lookup
Sep 23, 2015Say I want to lookup a value in another dataset, but there is a grouping that requires you to know what the values for each level is in order to get to the correct detail record. Can you still use the lookup function with more than one field to compare against? So for example
Department
\___SalesPerson
\___Measure
I want to be able to add a new row at the Measure level, but lookup each field from another dataset. In order to do that I will need the Department AND SalesPerson values to do the lookup, but I dont think the Lookup function will let us do that will.
Is It Possible To Lookup Value Based On Two Tables Using Lookup Task
Jun 27, 2007Hi All,
Actually this is in regard to SCD Type 2 Dimension, Scenario is like that I am moving Fact table from some old source and I have dimensionA description value in fact which I want to replace with appropriate id from Dimension Table and that Dimension table is SCD Type 2 based on StartDate and EndDate and Fact Table doesn't contains direct date value rather there is timeId in Fact so to update the value in Fact table I have to Join Time Dimension table and other Dimension Table to replace fact Description with proper Id.
Lets assume DimensionA Structure
id
Description
StartDate
EndDate
Fact Table
id
measure1
measure2
TimeId
Description
Time Dimension
TimeId
Date
Day
Hour ...
Row Yielded No Match During Lookup When Using 2 Columns In Lookup
Jul 24, 2007I am doing a lookup that requires mapping 2 columns in the column mapping section. When I do this, I get the error "Row yielded no match during lookup" . The SQL that I captured in SQL profiler does find the record when I run it in Management Studio. I have already tried trimming everything to no avail.
Why is this happening?
I tried enabling memory restrictions but then I my package hangs and I get a SQLDUMPER_ERRORLOG.log file with the following logged:
07/24/07 13:35:48, ERROR , SQLDUMPER_UNKNOWN_APP.EXE, AdjustTokenPrivileges () failed (00000514)
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Input parameters: 4 supplied
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ProcessID = 5952
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ThreadId = 0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Flags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDumpFlags = 0x0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, SqlInfoPtr = 0x0100C5D0
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, DumpDir = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExceptionRecordPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ContextPtr = 0x00000000
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ExtraFile = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, InstanceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, ServiceName = <NULL>
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 11 not used
07/24/07 13:35:48, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 15 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, Callback type 7 not used
07/24/07 13:35:49, ACTION, SQLDUMPER_UNKNOWN_APP.EXE, MiniDump completed: C:Program FilesMicrosoft SQL Server90SharedErrorDumpsSQLDmpr0033.mdmp
07/24/07 13:35:49, ACTION, DtsDebugHost.exe, Watson Invoke: No
Why am I getting this error with "Enable Memory Restriction"?
Row Yielded No Match During Lookup While There Is No Row Going Through The Lookup
Sep 29, 2006Hi all,
I don't understand what's happening here.
I have a Conditional Split with 3 outputs. On the first output I have a lookup, when I execute the package I have 56 rows going through the Conditional Split, all rows are then going to the 2nd and 3rd output but the lookup on the first output generates an error "Row yielded no match during lookup".
I don't understand why the lookup is generating an error while there is no row going through it.
Any idea ?
Sébastien.
How To Pick Nearby Text Of Lookup Terms With Help Of Term Extraction/Term Lookup
Oct 4, 2007I am designing a ssis package,This is intends to mine text data(Data extracted from websites).
Term lookup/Term extraction has been used as tools for mining.
I have lookup terms defined with me for reference table,but the main problem lie in extracting the nearby text/number/charcters to these lookup terms during mining.
For example :
I found noun "Email" 200 (frequency score) times in my text,Now I want to extract nearby email address(this is also true for PhoneNumber,Address attributes also).so how can I achieve this with SSIS.
If u have some idea/suggestion to carry out this challenge with or without Term Extraction/Term Lookup,plz do write here.
DTS Transform
Jul 13, 2004I get this error:
column 6 ('CheckDate', dbType_dbtimestamp), status 6: dat over flow
invalid character value for cast specification
Here is the sql generated :
CREATE TABLE [DMS].[dbo].[Master] (
[Date_Entered] smalldatetime NULL,
[Initials] nvarchar (10) NULL,
[VendorName] nvarchar (50) NULL,
[CheckNum] nvarchar (20) NULL,
[ExpenseType] nvarchar (10) NULL,
[CheckDate] smalldatetime NULL,
[CheckAmount] money NULL
)
IM guessing i need to change date_enteed type or do a cast
any help pls
!~<M
Look UP Transform
Apr 10, 2008
Hi ,
i am using to Lookup transform for the matching records , if my source records are matching with lookup records it work fine , if not it through the following error
[Lookup [34]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "component "Lookup" (34)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (36)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Please advice , how i can solve this .
Thanks in Advance
Raja Ragothaman
DTS Transform Issue
Jun 28, 2006I am importing data from Excel to a SQL table using a simple DTS. At times the DTS fails because one of the columns in the Excel file may have an invalid time date entry. Sometimes the time will be an invalid negative number and will cause an overflow error durring import to the SQL table column.
Is there a way to capture the data before writing it to the table and validate it and if it is invalid, or more specifically a negative nuimber, enter a default value or a null value?
If there is could you be specific in how to setup the DTS transformation script.
TIA
Jeff
Transform XML From A SELECT...FOR XML
Jan 14, 2008I want to transform elements in a XML-respons.
If I use FOR XML PATH, ELEMENTS in the SELECT-statment I get the following result:
<row>
<nr>99</nr>
<namn>test bolag</namn>
</row>
<row>
<nr>02</nr>
<namn>test bolag 2</namn>
</row>
I want to modify the elements so that they look like this insteed in the SELECT-statment.
<row>
<field name="nr">99</field>
<field name="namn">test bolag</field>
</row>
<row>
<field name="nr">98</field>
<field name="namn">test bolag 2</field>
</row>
I need to transform the resulting XML because I need to send it to a webservice with a mySQL database on the reciving end.
Please help me :-)
Data Transform
Jun 22, 2008Hi friends,
Can somebody tell me how to do this-
How can we Analyze existing code used to transform data into the Operations Data Warehouse, and make changes to correspond to upcoming changes in the SAP data sources.
Thanks
sk