Hi all,
Currently we take full database backups nightly for our SQL Server 2000 data warehouse systems. The backups take a very long time over 20 hours and we would like to find a good way to reduce these backup times. How can I change our backup plan to reduce the long backup run times. Data size is 1 TB for our data warehouse database server.
Thanks
What is the best procedure/sequence to reduce some tables containing large number of rows of
a SQL 2000 server?
The idea is first to check which tables grow extremely fast (all statistics, user or log tables), reduce the table
according to the number of months the user wishes to keep in the table.
As a second step backup remaining rows of table as txt files on harddisk (using DTS), UPDATE STATISTICS and re-indexing reduced table.
Run DTS Package every month once (delete oldest month and backup newest month) and do the same as above to keep size of tables adequate.
What is a fast way to reduce number of rows of a large table - the following example produces an error (timeout expired) of my
ADO connection when executing:
SET @str = 'DELETE FROM ' + @ProcessTable + ' WHERE ' + @SelectedColumn + ' < DATEADD (m,' +' -' +
@KeepMonthsInDatabase + ',
+ GETDATE())'
EXEC (@str)
Adding ConnectionTimout = 0 did not help unfortunately.
What is the best way to re-index the table just maintained?
Thanks
mipo
hi
i have a database that becomes to big after a few days. is there a chance to say if the table reaches a number of lines or a special memorysize, delete (or better archive) the oldest entries?
thanks
I have inherited a number of databases which were substantially over sized when they were set up. I'd like to reduce both the log and database files to be smaller than their original sizes, what's the easiest way to do this? If anyone has any experience of doing this please reply.
View 1 Replies View RelatedI have a production database of a size of 70 GB. Half of the data was archived and deleted from the current database. What is the best way to
reduce the size of the database, as we cannot shrink an entire database to be smaller than its original size? Thanks a lot!
Hello. I am wondering how to effectively reduce the size of my database. After viewing the individual table sizes, I have come to realize that nearly 99% of the database's size is due to images. I am told that too much binary data is not good. How can I go about reducing the size of my database (possibly the images themselves)? I'd appreciate any help.
View 11 Replies View RelatedHello all - I have an installation of SQL Server 2K5 Express with Reporting Services on an XP Pro SP2 PC. It has been running for about 6 months now. Within the 1st month, I had to restore the Encryption Key (the Report Manager failed to function properly).
All had been well until last week, when I had to restore the encryption key (for the same reason). After restoring the encryption key, the Report Manager immediately started to work again.
It happened again today, so I had to once again restore the encryption key. Can anyone offer any ideas as to why/how this would happen?
Thanks!
I've got the below and have several variation and still cant seem to find a perfect way to query the server to bring back that last full backup per db. I'm shopwing mutilple records in the backup set db w/ type = 'D'. I look online and type D = Database. Which i assumed it meant full database backup. Apparently not. Try running the below on one of your full databases. Then check to see if the date is actually the last backup date.
DECLARE @db_name VARCHAR(100)
SELECT @db_name = DB_NAME()
-- Get Backup History for required database
SELECT TOP ( 30 ) s.database_name,
m.physical_device_name,
[Code] ....
Hello,A while back I dropped a text column from a SQL Server 7 databaseroughly 3GB in size. I expected the size of the database to decreaseby around 1GB, but no change occurred. After searching usenet, Idiscovered that SQL Server 7 has no way of reclaiming that space, butthat there is some command that can be run in SQL Server 2000 thatwill reclaim it.I have since migrated this database to SQL Server 2000, and am nowtrying to figure out what that command is, but cannot locate anyusenet posts about it... also tried searching books online, but can'tfind anything that way either.Does anyone know what I should run?Thanks,Tom
View 6 Replies View Related
I have a problem when i restore my .DAT_BAK file. I am getting error like "The backup set holds a backup of a database other than existing database. Restore Database is terminating abnormally".
I tried by using
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH MOVE 'VZAI_DATA' TO D:PROGRAM FILES..MSSQLTEST.MDF',
MOVE 'VZAI_LOG' TO D:PROGRAM FILES..MSSQLTEST.LDF',
REPLACE
And also i tried like
RESTORE DATABASE <DATABASENAME>
FROM DISK = 'D:DATAMYTEST.DAT_BAK'
WITH REPLACE
When i use like this,
RESTORE FILELISTONLY FROM DISK = 'D:DATAMYTEST.DAT_BAK'. I am able to get the output as LogicalName, PhysicalName, Type, FileGroupName, Size, etc.
Can i anyone please help me out?
Thanks in Advance,
Anand Rajagopal
Hi there
I'm getting this message on my third automated backup of the transaction logs of the day. Both databases are in full recovery mode, both successfully backed up at 01.00. The transaction logs backed up perfectly happily at 01:30 and 05:30, but failed at 09:30.
The only difference between 05:30 and 09:30's backups is that the log files were shrunk at 08:15 (the databases in question are the ones that sit under ILM2007, and keeping the log files small keeps the system running better).
Is it possible that shrinking the log files causes the database to think that there hasn't been a full database backup?
Thanks
Jane
Hi all,
I have a table with 4869068 rows and when some one tries to insert the records into this table the database times out....Does any one know what could be the reason and from where do I start debugging.
I have no problem with the disk space?
Thanks,
Venu
If I execute the command ALTER DATASE SET MULTI_USER WITH ROLLBACK IMMEDIATE and there are any connections to the database, the command fails with a "Lock request time out period exceeded." message. If I use SET RESTRICTED_USER, the command succeeds with the following message: "Nonqualified transactions are being rolled back. Estimated rollback completion: 100%." This seems to be a bug.
View 5 Replies View RelatedFor security reasons customer wants to put a SQL database on an encrypted thumb drive (IronKey). Here's the rub though. He wants to be able to work with the data on a workstation. Then, if he takes his laptop out of the office he wants to be able to simply plug that thumb drive into the laptop and fire up SQL on the laptop and use that same database. Procedurally this would work in that the database can be created so that the location is the same from both machine viewpoints, however will the two different SQL instances allow moving the database back and forth like this?
View 9 Replies View RelatedHi,
I am cleaning database backup history as "Delete history if 4 months old" for backup file, and "Delete history if 1 week old" for Log file back.
lets say, I have disaster after 3 months, and I recover database with data and log backup files. Will I be able to recover with 3 month old backup file with just 1 week Log file backup. As I am keeing my Log backups only for 1 week.
Thanks,
We take a full backup in the early morning and hourly transaction log back during the working hours for one database in the production server. The application team made certain changes to the design of the said database in their development server. The backup from the development server was restored to the production server during working hours. After the restoration should we take a full backup before next transactional logbackup? Would the transactional log backup with out a full backup after the restoration of a database be valid?
View 5 Replies View RelatedI have a database that is just over 1.5GB and the Full backup that is 13GB not sure how this is since we have compression on for full backups and my other full backups are much smaller than there respective databases...Now my full backup is taken every Sunday night and the differentials are taken every 6 hours after the full backup. Now I have been thrown into this DBA role with little to no experience just what I have picked up and read. So my understanding of backups are limited but what I think I understand is that we take a full backup and the differential only captures what changes in the database so my question is why is my database 1.5GB but my differential is 15.4GB? I have others database that are on the same instance and don't seem to have this problem. I also just noticed that we do not rebuild the index before a full backup like we do on other instances...
View 13 Replies View RelatedBackup failed to complete the command backup database [ ] TO VIRTUAL DEVICE = ' { 853D3FC0 - 45EA -85B1 - 54F0EA379CAC } 24 ' WITH SNAPSHOT , BUFFERCOUNT = 1 , BLOCKSIZE = 1024
View 1 Replies View RelatedI should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
I have a full backup and several diff backup,now i want to restore
firstly,I restore full backup
RESTORE DATABASE ***
FROM DISK = 'D:databackup200610140000.bak'
WITH NORECOVERY
GO
it's working,then i don;'t know how to continue
Thanks in advance
Hi All,I am facing this issue very frist time. I add a logical device asfollowing:USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksData','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksData.bak'-- Create a logical backup device, AdvWorksLog.USE masterGOEXEC sp_addumpdevice 'disk', 'AdvWorksLog','C:Program FilesMicrosoft SQLServerMSSQL.1MSSQLBACKUPAdvWorksLog.bak'-- Back up the full AdventureWorks database.BACKUP DATABASE AdventureWorks TO AdvWorksData-- Back up the AdventureWorks log.BACKUP LOG AdventureWorksTO AdvWorksLogThe database backup is completed successfully but log's backup failswith the following messages:Msg 4214, Level 16, State 1, Line 1BACKUP LOG cannot be performed because there is no current databasebackup.Msg 3013, Level 16, State 1, Line 1BACKUP LOG is terminating abnormally.We are moving from SQL 2000 to SQL 2005. I have ensured that databasehas full recovery mode on. We are using SQL 2005 on Windows 2003 ServerSP1.Further more, I also created a plan to test it, and plan also failswhen backing up the logs.Can anyone shed some light on this issue.Thanks in advance.Najm
View 1 Replies View RelatedHi,
I have a MS SQL Server 2005 Enterprise Edition 9.0.2153 which manages my BizTalk Server 2006 Databases. The BizTalk server installer automatically creates a job named Backup BizTalk Server (BizTalkMgmtDb) which should back up the databases and transaction protocolls.
The SQL Server Agent runs under domain-administrator account which has full access to my backup directory D:ackups.
The job executes the following steps:
Step 1: BackupFull:
Command:
exec [dbo].[sp_BackupAllFull_Schedule] 'd' /* Frequency */, 'BTS' /* Name */, 'D:Backups' /* location of backup files */
Step 2: MarkAndBackupLog
Command:
exec [dbo].[sp_MarkAll] 'BTS' /* Log mark name */, 'D:Backups' /* location of backup files */
My challenges are:
1. The job doesn't back up my databases(D:Backups is empty after executing the job)
2. I get every time the following error in error protocol of the job:
BACKUP LOG cannot be performed because there is no current database backup. [SQLSTATE 42000] (Fehler 4214) BACKUP LOG is terminating abnormally. [SQLSTATE 42000] (Fehler 3013).
I have already switched the Databases from full to simple recovery mode and vica versa, it didn't help. Also, the above stored procedures doesn't include neither the TRUNCATE nor the LOG parameters for the logfiles so I wasn't able to solve this issue by adjusting these flags.
Any help would be appreciated.
Thanks in advance,
Greg
I am using sql server 2000 and windows server 2003 standard edition:
My database backup job is failing due to lack of disk space. I am taking the backup onto E drive and the
available free space on E drive is 6.85 GB and there are no other drives I can use for the database backups.
The size of mdf file is 21 GB and that of ldf file is 4.2 GB.
The transaction log back up job of that db ran fine.
This database recovery model is Full and
Auto shrink is not checked.
There is one primary filegroup for the database.
In this situation, I am thinking of the following option:
1. Backup the db and log files onto another network shared drive.
If I want to still use the same server E drive to backup the db and log files instead of using another network shared drives.
how can I do that.
Please let me know the best way of handling this issue.
Any help is greatly appreciated. Thanks!
I neglected to backup the transaction log as part of the process of backing up the database. Now i only have the backup file for the database and no transaction log backup. When i try to do a restore on the database, i get the error on a "tail log missing" message (which i'm assuming is that it's looking for the t-log backup?).
Is it possible to restore or even restore to a new database? I'm only looking to retreive data from 2 tables within the backup file.
Thanks!
SQL Server 2005 on Windows 2003 Server x64.
Hi,I have the following three tables below containing Resources,Categories and a link table so each Resource can belong to one or moreCategories. I would like to create a view (ResourceID, ResourceName,CategoryID, CategoryName) that includes one row for each Resource withjust one of the Categories that it belongs to.Resource table- ResourceID- ResourceName- etc..Category table- CategoryID- CategoryName- etc..ResourceCategory table- ResourceID- CategoryIDCan anyone help? Thanks.
View 2 Replies View Related
We replicate a SQL2000 database (DataBaseA) to a SQL2000 database (DataBaseB) by using the Restore function and hasn't change its logical name but only the physical data path and file name. It is running fine for a year. We use the same way to migrate the DataBaseB to a new SQL2005 server with the Restore function and the daily operation is running perfect. However, when we do the Backup of DatabaseB in the SQL2005, it just prompt the error message
System.Data.SqlClient.SqlError: The backup of full-text catalog 'DataBaseA' is not permitted because it is not online. Check errorlog file for the reason that full-text catalog became offline and bring it online. Or BACKUP can be performed by using the FILEGROUP or FILE clauses to restrict the selection to include only online data. (Microsoft.SqlServer.Smo)
Please note we left the DataBaseA in the old SQL2000 server.
Please help on how we can delete the Full-text catalog from DatabaseB so we can do a backup
Many Thanks
i used "dbcc shrink file" to reduce the log file of a database.the query analyzer says "successfully executed" but the log file doesn't seem to reduce..am i missing something?
View 2 Replies View RelatedHi all!
The transaction log of the databse i am using has grown up to 7GB...(previously the setting was unrestricted file growth...now changed to restrict file growth to 7 GB approx.)
now this 7GB space is not needed....i would like to reduce the size to around 2 GB...how can i achieve this?i observer that on the properties i can only increase the size and not decrease it...also i am using transactional replication..this server is the publisher to four subscribers..
Hi guys, how are you?
Ive got a little question, i hope you can help me up
in sql server i have 3 tables
Code:
user
id_user - autoincremental int, primary key
username - varchar 30
car
id_car - autoincremental int, primary key
carName - varchar 30
user_car
id_user - int, foreign key
id_car - int, foreign key
what i want to do, is to
1.- insert a row in User,
2.- insert a row in Car
3.- using SCOPE_IDENTITY, to insert a new row in user_car that relates the ids of the last added car with the last added user.
But i need that to be done in one single transaction.
Once that is done, i have another question
how can i do the same but where i can add a variable number of different cars? in other words, i add 1 user and then add 5 cars, then create 5 rows in the user_car where i have the id of the last added user with the incremental id of the last 5 added cars
how can this be done in one single transaction, i cant make it in 3 transactions cuz it would cause me a lot of trouble. Any help?
my transaction should be something like this
Code:
insert into user(username) values('user1');
insert into car(carName) values('car1');
insert into user_car(???,???)
but im not sure how to do this in one single transaction
Hi,
If I understand it correctly, you only need an LDF file to restore to a point in time after the last full backup? If this is so, then Could the LDF file not be reduced in size on perfoming a full backup?
Most of the time it's not an issue as there is enough space on the HDD, but is it possible to reduce the ldf file size periodically (manually would be fine). Is changing the recovery mode from FULL to SIMPLE and then back to FULL an option?
If so, is anyone able to tell me how, exactly, I can do this? ... I've sifted through the documentaion to no avail ... :eek:
Many thanks
Rob
I am trying to reduce the size of my tempdb using the DBCC SHRINKFILE command and get the following error.
DBCC SHRINKFILE: Page 1:1164376 could not be moved because it is a work table page.
How can I get around this so I can shrink the db?
Hi all,
I have started to look at the way our production DB has been defined and set up, with the view to improving performance.
The DB is now 11gb, and the original size was set up as 3000mb, the rest has been take in 10% additional extents.
Now, back in my DB2 DBA days, this was a bad thing to have any data spread across extents as they may not be contiguous. I am assuming that is the same with SQL Server. Can someone confirm/deny this?
If this is the case, how can I get the DB back into one primary partition?
Thanks in advance.
Mike
If I have a transaction log in a database of size 1GB ( space allocated is during creation of database) currently only 300 mb of its space is used i.e. nearly 700 mb is free. If I want to reduce physical file size of transaction log by 200 mb and release it for operating system then How can I do it???
View 4 Replies View Related