I am trying to build a query for a report and I need both results for a column to show on the same row. The results are multiple names tied to the same account.
This is what I am trying.
SELECT
number AS 'Customer'
(case when seq = '0' then name end) as 'name1',
(case when seq = '1' then name end) as 'name2'
FROM customer
WHERE number between '600080' and '600230'
I have 2 Table
Authors
ID Name
1 Clint
2 Voke
Books
BookID ID BookName Price
1 1 Book1 10
2 1 Boo21 12
3 2 Book3 6
4 1 Book4 13
5 1 Book5 2
Now I want to List All Authors and only show Most Expensive book Name of each Author.
So I need this Fields :ID,Name,BookName,BookID,Price.
How could I Write SQL query For It (I want to show results in DB Without Using SP).
I want to Create NEw Views Which Shows my required Results.
thanks,
I have a sproc in my database that when editing in VS 2003 shows different results.
The sproc code is:
ALTER PROCEDURE dbo.VMUsage_GetRaw
@VMBox nvarchar,@StartDate datetime,@EndDate datetime
AS
SET NOCOUNT ON
SELECT *FROM VMRawUsageWHERE (ACCOUNT = @VMBox) AND (CONVERT(datetime, DATE + ' ' + TIME) > @StartDate) AND (CONVERT(datetime, DATE + ' ' + TIME) < @EndDate)
When I open the SQL statement in the designer and run (and enter my parameters) I get a recordset returned, but when I just "Run Stored Procedure" and enter the same parameters I get no results. The same occurs when I run the sproc from my website (no results).
Any ideas what is happening between the two?
My query produces accurate results just produces one instance for each sales region. I am needing it to only give me one instance of each sales region and give me total counts. What should I re-write?
Code:
Select
salesmanname,
case when [state] IN ('GA', 'FL', 'AL', 'SC', 'NC', 'TN') Then 'South'
when [state] IN ('CA', 'NV', 'WA', 'OR', 'TX') Then 'West'
when [state IN ('NY', 'NJ', 'PA', 'DL', 'CT') Then 'NE'
end As [Sales Region]
[Code] ....
We have the below query that pulls benefit ids for employees but it will show each benefit on a separate row but we would like to have just one rows for the employee and columns for each of the benefits.
SELECT
hcd.PersonId,
hcd.PlanYear,
hcd.TaxIdNumber,
hcd.LastName,
hcd.FirstName,
hcd.BirthDate,
[code]....
I have made a couple of queries I want to use into a Visual studio project, Now is my problem:
All my queries have different statements. I believe the best is to show the results in a Datagridview
How to view them there? I know how to do it... but I have got about 30 queries
Here is my code so far:
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
ComboBox1.DataSource = MyDB_DevDataSet.DataSetName.
Dim connectionString As String = "Data Source=myDBmySRV;Initial Catalog=Teknotrans_dev;Integrated Security=True"
Dim sql As String = "SELECT * FROM CompanyMain"
[Code] ....
Hi there
We have a web application (database) that uses one field called Application and another called TicketType.
When a user fills out a ticket they can choose up to 3 levels of this field.
Eg Application, Application2, Application3
Eg TicketType, TicketType2, TicketType3
The extra two levels not being compulsory.
I am using sql server 2005 // Reporting Services
My query is as below:
SELECT Ticket.TicketNumber, Ticket.CreatedDate, Application_2.ApplicationName AS Application, Application_1.ApplicationName AS [App 2],
Application.ApplicationName AS [App 3], TicketType_2.TicketTypeName AS Tickettype, TicketType_1.TicketTypeName AS [Type 2],
TicketType.TicketTypeName AS [Type 3], Ticket.Description, Company.CompanyName
FROM Ticket INNER JOIN
TicketType AS TicketType ON Ticket.TicketTypeID = TicketType.TicketTypeID LEFT OUTER JOIN
TicketType AS TicketType_1 ON TicketType.ParentTicketTypeID = TicketType_1.TicketTypeID LEFT OUTER JOIN
TicketType AS TicketType_2 ON TicketType_1.ParentTicketTypeID = TicketType_2.TicketTypeID INNER JOIN
Application AS Application ON Ticket.ApplicationID = Application.ApplicationID INNER JOIN
Company ON Application.CompanyID = Company.CompanyID FULL OUTER JOIN
Application AS Application_1 ON Application.ParentApplicationID = Application_1.ApplicationID FULL OUTER JOIN
Application AS Application_2 ON Application_1.ParentApplicationID = Application_2.ApplicationID
WHERE (Ticket.CreatedDate >= @StartDate)
ORDER BY Ticket.TicketNumber
End result looks like this:
Application
App 2
App 3
TicketType
Type 2
Type 3
Software
Internal Apps
proACT
SW Other
Office Issues
General
Application
Click Track server
Alert (App)
Service
Network
Other
Network Fault
Software
Internal Apps
Other
User Account
New
Hardware
Network
HW Fault
Application
Click Track server
Alert (App)
Disk space
Office Issues
General
proACT
Configuration
Deployment
Software
Server Software
SharePoint
SW Fault
App Failure (Function)
Software
Server Software
SharePoint
SW Fault
App Failure (Function)
Ultimately I would like the Application (TicketType) fields to have the Master Information in it and the other two fields populated in order as well.
Can someone help please.
Please ask if I haven't explained myself.
thanks
Dianne
I have 2 TableAuthorsID Name1 Clint2 Voke
BooksBookID ID BookName Price1 1 Book1 10 2 1 Boo21 12 3 2 Book3 6 4 1 Book4 13 5 1 Book5 2
Now I want to List All Authors and only show Most Expensive book Name of each Author.So I need this Fields :ID,Name,BookName,BookID,Price.
How could I Write SQL query For It (I want to show results in DB Without Using SP).I want to Create NEw Views Which Shows my required Results.
thanks,
Query should only return less than 3000 records but its returning over 4M. It needs to show all duplicates records.... All the info are on the same table VENDFIl, so I used a self join but it seems to be looping..
SELECT A.FEDTID, B.VENDOR, C.NPI_NUMBER
FROM VENDFIL A, VENDFIL B, VENDFIL C
GROUP BY A.FEDTID, B.VENDOR
Hello Frds,
This is my query
Select Assessment_Id,Question_Id,Question_short_description,
(isnull(Answer_description,' ') + ' ' + Answer_text) as Answer
from dbo.viewX where assessment_id ='xxxx'
Pleae Note: This query is assigned to a string and passed to the database layer. So, i need the modifications with in this query.
Answer_description and Answer_text are the two different fields,
i need to embed a ":" (colon) between the two data if Answer_text is having any data
else display only answer_description.
Thanks in advance..
Phani.
I am looking for a way to show how I can have a result set that shows a record with one item and the number of records where it was purchased or sold. Below is my sample data.
Use tempdb
go
create table #ItemLedgerEntry
(
ENTRYNO INT NOT NULL
, ITEMNO VARCHAR (50) NOT NULL
, POSTINGDATE DATETIME NOT NULL
, ENTRYTYPE INT NOT NULL
[code]....
I know something like this will give me results but I'd like to run one query.
select itemno, count(*) from #ItemLedgerEntry where entrytype = 0
group by itemno
order by count(*) desc
I ran this query against the pubs database and it runs successfully
ALTER TABLE publishers ALTER COLUMN state CHAR(25)
I change the table & field names for my db as follows:
ALTER TABLE customquery ALTER COLUMN toclause CHAR(25)
and run against my database and I get the following error - Incorrect syntax near 'COLUMN'.
My column name is correct - I don't know why it would run fine against pubs, but not my db. I do not have quoted identifiers turned on. I have tried using [] around my column name [toclause], but that didn't change anything. Any help would be appreciated.
Thanks.
This is my table structure
--=====
create table calculate(
ID int identity (1,1),
PreviousYear_Profit float not null,
)
insert into calculate values (12500)
insert into calculate values (22700)
insert into calculate values (18500)
insert into calculate values (25800)
--======
I want to calculate variance and expected output is
ID PreviousYear PriorVersion Variance
1 12500 sum(PreviousYear) PreviousYear-PriorVersion
2 22700 sum(PreviousYear) PreviousYear-PriorVersion
3 18500 sum(PreviousYear) PreviousYear-PriorVersion
4 25800 sum(PreviousYear) PreviousYear-PriorVersion
I don't have PriorVersion and Variance columns.
PriorVersion will be like sum(PreviousYear)
Variance will be (PreviousYear - PriorVersion)
I can query if I have column, since I don't have these two column how could I possibly achieve the output using my existing table schema.
i'm trying to capture data for every hour and would like to display the hours of the day in a column.
select
case when (datepart(hh,calldate) between 0 and 7AM then 1 else 0 end as [12-7AM],
case when (datepart(hh,calldate) = 8 then 1 else 0 end as [8AM]
from table1
where cast(calldate as date) = cast(calldate as date)
My desired result should display
12-7 am
8 am
9 am
10 am
I have a table with some rows and columns what i want is i want to Show sum of particular column in the last row. This is my code.
SELECT DISTINCT Cluster.ClusterName, Gruppe.GruppeName, Arbeitspaket.ArbeitspaketName, BMWProjekt, AnzahlAP, Abgerechnet, InBearbeitung, Billanz FROM Bestellung
INNER JOIN Cluster ON Bestellung.Cluster = Cluster.rowid
INNER JOIN Arbeitspaket ON Bestellung.Arbeitspaket = Arbeitspaket.rowid
INNER JOIN Gruppe ON Bestellung.Gruppe = Gruppe.rowid
WHERE Projekt ="EA-284-Nxx" AND AnzahlAP <> 0 AND Abgerechnet is 1 AND InBearbeitung is NULL AND Billanz is NULL;
We sometimes have small values stored in a column with datatype of float like 0.000644470739403048 which is being converted to -5.8E-05. Perhaps that is OK to be stored in the database however I need the value in decimal format to use. (I'm using longitude values in google maps).
is there anything I can do at the database level. I was looking at the properties which is 53 numeric precision and 8 length.
How can I compare column in the same table and show only column and value that has been changed.
declare @t table (GroupID CHAR(6),Text1 VARCHAR(MAX),Text2 VARCHAR(MAX),Text3 VARCHAR(MAX))
insert into @t
SELECT '11111','Text1','Text2','Text3'
insert into @t
SELECT '11111','Text1','Text2','Text4'
END RESULTS:
Column Name Old New
Column 3 |'Text3' |'Text4'
Hi,I need what would be similar to a cross tab query in Access.First Column down needs to show all the months, column headings wouldbe the day of the month....1 2 3 4 etc...JanFebMaretchow do i set this up in a stored procedure?any help to get me in the right direction would be greatlyappreciated!!thanks,paul
View 2 Replies View RelatedI made a select query which shows following output as shown in picture .
Now I want to add one more column in this query to show current bags and Bags in these 2 columns i want to show calculation like in first rows currentbags column (Receivedbags-DeleiveredBags) and in currentWeight column RecivedWeight+loss-gain-Deliverdweight) which is 1400 and 697.5 after that in secound row i want to add frist rows currentbags value+ second rows (Receivedbags-DeleiveredBags) and same in weight like daily stock register so output looked like below image
There is one more column common date according to which i have to make calculation like
rid commondate recdate recbags recweight loss gain delbags delwght
101215109 01/01/2015 07/01/2015 1400 697.5 0 0 0 0
101215110 02/01/2015 08/01/2015 560 279.64 0 0 0 0
Dear people,
When i test my page for uploading image too my sql database everthing goes ok (i think) en when i look into my database table i see 3 colums filled
1 column with: Image_title text
1 column with:Image_stream <binary data>
1 column with image_type image/pjpeg
How can i show this image in a gridview column..... i have search for this problem but non of them i find i can use because its a too heavy script, or something i dont want.
Is there a helping hand
Below is the script for uploading the image.....and more
1
2 Imports System.Data
3 Imports System.Data.SqlClient
4 Imports System.IO
5
6 Partial Class Images_toevoegen
7 Inherits System.Web.UI.Page
8
9
10 Protected Sub btnUpload_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnUpload.Click
11
12 Dim imageSize As Int64
13 Dim imageType As String
14 Dim imageStream As Stream
15
16 ' kijkt wat de groote van de image is
17 imageSize = fileImgUpload.PostedFile.ContentLength
18
19 ' kijk welke type image het is
20 imageType = fileImgUpload.PostedFile.ContentType
21
22 ' Reads the Image stream
23 imageStream = fileImgUpload.PostedFile.InputStream
24
25 Dim imageContent(imageSize) As Byte
26 Dim intStatus As Integer
27 intStatus = imageStream.Read(imageContent, 0, imageSize)
28
29 ' connectie maken met de database
30 Dim myConnection As New SqlConnection(ConfigurationManager.ConnectionStrings("Personal").ConnectionString)
31 Dim myCommand As New SqlCommand("insert into tblMateriaal(Image_title,Image_stream,Image_type,ArtikelGroep,ArtikelMaat,Aantal,Vestiging,ArtikelNaam,ContactPersoon,DatumOnline) values(@Image_title,@Image_stream,@Image_type,@ArtikelGroep,@ArtikelMaat,@Aantal,@Vestiging,@ArtikelNaam,@ContactPersoon,@DatumOnline)", myConnection)
32
33 ' Mark the Command as a Text
34 myCommand.CommandType = CommandType.Text
35
36 ' geef alle parameters mee aan het command
37 Dim Image_title As New SqlParameter("@Image_title", SqlDbType.VarChar)
38 Image_title.Value = txtImgTitle.Text
39 myCommand.Parameters.Add(Image_title)
40
41 Dim Image_stream As New SqlParameter("@Image_stream", SqlDbType.Image)
42 Image_stream.Value = imageContent
43 myCommand.Parameters.Add(Image_stream)
44
45 Dim Image_type As New SqlParameter("@Image_type", SqlDbType.VarChar)
46 Image_type.Value = imageType
47 myCommand.Parameters.Add(Image_type)
48
49 Dim ArtikelGroep As New SqlParameter("@ArtikelGroep", System.Data.SqlDbType.NVarChar)
50 ArtikelGroep.Value = ddl1.SelectedValue
51 myCommand.Parameters.Add(ArtikelGroep)
52
53 Dim ArtikelMaat As New SqlParameter("@ArtikelMaat", System.Data.SqlDbType.NVarChar)
54 ArtikelMaat.Value = ddl2.SelectedValue
55 myCommand.Parameters.Add(ArtikelMaat)
56
57
58 Dim Aantal As New SqlParameter("@Aantal", System.Data.SqlDbType.NVarChar)
59 Aantal.Value = ddl3.SelectedValue
60 myCommand.Parameters.Add(Aantal)
61
62 Dim Vestiging As New SqlParameter("@Vestiging", System.Data.SqlDbType.NVarChar)
63 Vestiging.Value = ddl4.SelectedValue
64 myCommand.Parameters.Add(Vestiging)
65
66 Dim ArtikelNaam As New SqlParameter("@ArtikelNaam", System.Data.SqlDbType.NVarChar)
67 ArtikelNaam.Value = tb6.Text
68 myCommand.Parameters.Add(ArtikelNaam)
69
70 Dim ContactPersoon As New SqlParameter("@ContactPersoon", System.Data.SqlDbType.NVarChar)
71 ContactPersoon.Value = tb1.Text
72 myCommand.Parameters.Add(ContactPersoon)
73
74 Dim DatumOnline As New SqlParameter("@DatumOnline", System.Data.SqlDbType.NVarChar)
75 DatumOnline.Value = tb2.Text
76 myCommand.Parameters.Add(DatumOnline)
77
78 Try
79 myConnection.Open()
80 myCommand.ExecuteNonQuery()
81 myConnection.Close()
82
83 Response.Redirect("toevoegen.aspx")
84 Catch SQLexc As SqlException
85 Response.Write("Insert Failure. Error Details : " & SQLexc.ToString())
86 End Try
87
88
89 End Sub
90 End class
I am using table object to present report.
table row1 has all the column names and table row2 has the data.
How can i put a horizontal line between column names and the data rows.
Thank you very much.
I want to show this kind of output
UserID UserName 1 2 3 30
OR
UserID UserName 1 2 3 31
user data saved in db select distinct UserID,Name from Userss Where IsActive=1 and order by UserID and i want to just calculate no of days in month based on year and month name supplied by user. one way i can do it. first i will create a temporary table and in loop add many columns to that table and later dump user data to specific column.
Hi all,
Is it possible to show or hide columns in a report on the fly, i.e. without having to run the report again?
I have a report in with a parameter to let the user choose between the data to show. However the customer doesn't like it that he has to rerun the report. Any help would be appreciated!
Regards,
Henk
Hi All,
I have following problem
please help me to resolve it.
There is table for shipping
as follows:
City
Kg
Rate(rs)
Rajkot
1
25.00
Rajkot
2
30.00
Rajkot
3
42.50
Ahemedabad
1
42.50
Ahemedabad
2
55.00
Ahemedabad
3
67.50
Ahemedabad
4
80.00
Goa
1
90.00
Goa
2
105.00
Goa
3
120.00
Gondal
1
25.00
Gondal
2
30.00
Gondal
3
42.50
Morbi
1
25.00
Morbi
2
30.00
Morbi
3
42.50
Gandhinagar
1
42.50
Gandhinagar
2
55.00
Gandhinagar
3
67.50
Gandhinagar
4
80.00
We need to display
the table in html page using any Asp.Net language.
The result table should be:
City(s)
1
2
3
4
Rajkot,Gondal,Morbi
25.00
30.00
42.50
-
Ahemedabad,Gandhinagar
42.50
55.00
67.50
80.00
Goa
90.00
105.00
120.00
-
Baruch
70.25
80.00
92.00
120.50
Description:
- Display all the cities
together for which all the shipping charges for (1-4) kgs are same. The range
of kgs is not fixed.
Reply as soon as possible.
Thanks
in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
its taking so much of time how t o solve ?
I created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL
My script is here, and the sample result is attached. How should I modify this query to get my expected result?
select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
a.Customer_Status_Txt,
a.Legal_Entity_Type_Txt,
a.Business_Unit_Txt
FROM dw_mart.dbo.DimCustomer a
[code]....
Hi All,
I need to show the Cumulative calculated value only in Total by year/Group. I could not use Visibility expression using
InScope, as it creates *Blank column. Please go thru details below.
Year
Month01 02 03 Total
Salary Salary Salary Salary Cumulative (Calc)
Employee01 20 5 25 25
Employee02 10 10 20 45
.....
Total
How can i achieve this?. Any suggestion on this would be appreciated.
Thanks,
I have one column in a matrix component and it has about 7 items, but the only the items which have values on the page appear at the top of that page.
This is for a labratory so the columns are the different Patient Types and the rows are the different Test Mnemonics. If one of the Patient Types is not used in any of the tests on that page, it doesnt show up. How to I make sure all Patient Types show up on every page?
Thank you all.
We are running 2014 enterprise. I noticed recently that my spreadsheet's column A, while not being used by user, doesn't show up in excel source preview. F1 is column B and so on.
View 4 Replies View RelatedI created a query that got the following result. But I expect to get the structure like, care_nbr, cust_nbr,legal_name, address_type=physical address, addr_line_1, addr_line_2, address_type-primary address, ddr_line_1, addr_line_2. That means I only need primary and physical address, and expect them to show in a row to each care_nbr. How to perform that?
CARE_Nbr||Cust_Nbr||Legal_Name||||||| Address_Tpye |||Addr_Line_1 ||||||||||||||||Addr_Line_2
99000001||004554||Mac Marketing, LLC||Billing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Mailing Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Primary Address||210 Parktowne Blvd Ste. 1||NULL
99000001||004554||Mac Marketing, LLC||Physical Address||210 Parktowne Blvd Suite 1||NULL
How should I modify this query to get my expected result?
select a.CARE_Number,
a.Customer_Nbr_Txt,
a.Customer_Type_Txt,
a.Legal_Name_Txt,
c.Address_Type_Txt,c.Address_Line_1_Txt,c.Address_Line_2_Txt,
[code]....
I'm running SQL Server 2008 Feb08 CTP and I've got a tablix with column groupings and row groupings which works nicely, I'm a becomming a big fan of the tablix.
However sometimes the filter I have on a column group returns no records and the whole column group disappears.
Is there any way to make this column appear with but with empty cells as I have another tablix down the page with the same columns and I want the columns to all line up on the multiple tablix.
In Version 2005 I used to achieve the equivalent of a column group within a table by adding a list with filter to the cell, this meant the column always was shown, the tablix allows does this much more elegantly but I'll have to go back to the old method if I can't make the column remain.
Am I just missing a simple option?
Nathan
In My cube I have :
A Fact table <<Company Revenue>>
2 Dimension <<Month.Dim>> , <<Company>>
I have 4 company say (A,B,C,D) but i have record for only company A & D that too only for December month .
When I create a SSRS report out of the cube i want a matrix where all the company names to be displayed in the rows & all the months in the columns and company's revenue in data
What my report is displaying :
Company | December
-------------------------------------------------------
A | 20000
-------------------------------------------------------
D | 3900
-------------------------------------------------------
what is needed :
Company | January | February | March | ........... | December
-----------------------------------------------------------------------------------
A | | | | | 20000
----------------------------------------------------------------------------------
B | | | | |
----------------------------------------------------------------------------------
C | | | | |
----------------------------------------------------------------------------------
D | | | | | 3900
-----------------------------------------------------------------------------------
How do i achieve this either in SSAS or SSAS.
I have a simple sql select statement that looks like this. Select Column1+ ' ' + Column2 As SpecFROM Table both columns are varchar's and the output i get is something like this.Spec-----------------------AaBbCc What I would like to return as my results is this: Spec--------------------AaBbCc I hope this makes sense. I can I accomplish that?Thanks!
View 3 Replies View Related