I am developing a system for my uni course and I am stuck a little problem...
Basically its all about lecturers, students modules etc - A student has many modules, a module has manu students, a lecturer has many modules and a module has many lecturers.
I am trying to get a list of lecturers that run modules associated with a particular student. I am able to get a list of the appropriate lecturers, but some lecturers are repeated because they teach more than one module that the student is associated with.
How can I stop the repeats?
Heres my sql select code in my cs file:
string sqlDisplayLec = "SELECT * FROM student_module sm, lecturer_module lm, users u WHERE sm.user_id=" + myUserid + "" + " AND lm.module_id = sm.module_id " + " AND u.user_id = lm.user_id ";
SqlCommand sqlc2 = new SqlCommand(sqlDisplayLec,sqlConnection);
I am using the query below to retrieve these results: You can see that the results are repeated, once for DATIF = 1 and then again for DATIF = 2. In this case does not matter if the results appear close to DATIF 1 or DATIF 2. Take in care that I can not know how may extradates or Extrasums are attached to each Account.
Is there any way to avoid these repeated rows? Thanks in advance, Aldo.
ExtraSums.SUF FROM EXTRADATES AS ExtraDates LEFT OUTER JOIN EXTRADATENAMES AS ExtraDateNames ON ExtraDates.DATFID = ExtraDateNames.DATFID RIGHT OUTER JOIN ACCOUNTS AS Accounts ON ExtraDates.KEF = Accounts.ACCOUNTKEY LEFT OUTER JOIN EXTRASUMS AS ExtraSums LEFT OUTER JOIN EXTRASUMNAMES AS ExtraSumNames ON ExtraSums.SUFID = ExtraSumNames.SUFID ON Accounts.ACCOUNTKEY = ExtraSums.KEF LEFT OUTER JOIN EXTRANOTENAMES RIGHT OUTER JOIN EXTRANOTES ON EXTRANOTENAMES.NOTEID = EXTRANOTES.NOTEID ON Accounts.ACCOUNTKEY = EXTRANOTES.KEF WHERE Accounts.SORTGROUP BETWEEN 0 AND 999999999 AND Accounts.ACCOUNTKEY BETWEEN '123456' AND '123456'
I have problem, i wanted a query which will search the duplicate and then give suggestionmost repeated word Table containing the records like below
ID Movie Name New Name
1 Spider Man Spider Man
2 Spider Man 2 Spider Man
3 Spider Man 3 Spider Man
4 Spider Man UK Spider Man
5 Spider Man USA Spider Man
6 New Spider Man Spider Man
7 Spider Man Black Spider Man
8 Spider Man Part 1 Spider Man
9 Spider Man Part 2 Spider Man
10 Spider Man I Spider Man
11 Spider Man III Spider Man
12 Spider Man Part II Spider Man My manufacturer send me the data in this format and i have to allocate there new name to do some comparison I wanted to make this process automatic. what i mean is i need a query which will give me a repeated records along with suggestion as new name. I am fully confident that you guys will help me out from this problem. Looking forward
If I have a student table with 3 columns ID, FirstName and LastName ID- FirstName -LastName ------------------------- 1 Tom Hanks 2 Jerry Thomas
and I have a subject table with two columns StudentID and Subject. StudentID is a foreign key to the student table. StudentID - Subject ------------------------ 1 History 1 Biology 2 History
If my query is select distinct student.id, student.fname, student.lname, student.subject from student left outer join subject on student.id = subject.studentid
then I get 1 Tom Hanks History 1 Tom Hanks Biology.
Is there a way I could get 1 Tom Hanks History null null null Biology
For the below mentioned query their is repetition of rows with the same data.
SELECT srs.prod_area as PA, srs.art as ArtNo, b.adsc_unicode as ArtName, cast(case when a.unit <> '2' then c.avsx/10 else c.avsx/1000 end as integer(2)) as AwsMHS, cast(srs.estimate/10 as integer(1)) as AwsSRSThisWeek,
I am running a query on multiple tables and the data I get back consists of several repeated rows but with one column different. I want to take out those repeated rows and for the column that is different join that data and separate it by a comma. Can this be done?
Ex. Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 717 Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 610 Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 310
So i would like this data to come up as: Cindy Lair 111 Drury Circle Harrisburg Pennsylvania 717,610,310
How to normalization would be use 3 tables ,one for tags_id and tags, and another relating the tags_id to ID from the table above...but how does the code already know there is a tag called repeating?
Hi All, Would appreciate some assistance with the attached, I'm using some fairly complicated recordsets (ASP VBScript) for a property search website, I have a page where a user selects search by County this in turn takes them to a page which lists all the towns in the county and number of live properties in each, I'm using 4 recordsets for this - 3 of which list the towns (townsA2I, townsJ2R & townsS2Z) the 4th is a Property Count, examples of the recordsets are below (using townsAtoI and LiveProperties -
TownsA2I
<% Dim TownA2I Dim TownA2I_numRows
Set TownA2I = Server.CreateObject("ADODB.Recordset") TownA2I.ActiveConnection = MM_recruta2_STRING TownA2I.Source = "SELECT towncountyID, Town, County FROM dbo.easytolettowncounty WHERE Town LIKE 'A%' AND County = '" + Replace(TownA2I__MMColParam, "'", "''") + "' OR Town LIKE 'B%' AND County = '" + Replace(TownA2I__MMColParam1, "'", "''") + "' OR Town LIKE 'C%' AND County = '" + Replace(TownA2I__MMColParam2, "'", "''") + "' OR Town LIKE 'D%' AND County = '" + Replace(TownA2I__MMColParam3, "'", "''") + "' OR Town LIKE 'E%' AND County = '" + Replace(TownA2I__MMColParam4, "'", "''") + "' OR Town LIKE 'F%' AND County = '" + Replace(TownA2I__MMColParam5, "'", "''") + "' OR Town LIKE 'G%' AND County = '" + Replace(TownA2I__MMColParam6, "'", "''") + "' OR Town LIKE 'H%' AND County = '" + Replace(TownA2I__MMColParam7, "'", "''") + "' OR Town LIKE 'I%' AND County = '" + Replace(TownA2I__MMColParam8, "'", "''") + "' ORDER BY Town ASC" TownA2I.CursorType = 0 TownA2I.CursorLocation = 2 TownA2I.LockType = 1 TownA2I.Open()
TownA2I_numRows = 0 %>
LiveProperties
<% Dim LiveProperties Dim LiveProperties_numRows
Sub sLivePropertyCount(vLocation) vCount=0
Set LiveProperties = Server.CreateObject("ADODB.Recordset") LiveProperties.ActiveConnection = MM_recruta2_STRING LiveProperties.Source = "SELECT COUNT(PropertyID) As NumberofProperties, propertylive, propertylocation FROM dbo.easytoletproperty WHERE propertylive = 'y' AND propertylocation = " & vLocation & " GROUP BY propertylocation, propertylive" LiveProperties.CursorType = 0 LiveProperties.CursorLocation = 2 LiveProperties.LockType = 1 LiveProperties.Open()
LiveProperties.Close() Set LiveProperties = Nothing end sub
LiveProperties_numRows = 0 %>
I've tried following the tutorial here http://www.webthang.co.uk/tuts/tuts_dmx/rob9/rob9.asp but when i review the page i get the following error -
"Microsoft OLE DB Provider for SQL Server error '80040e14'
Invalid column name 'Barnet'.
/PropertiesbyTown1.asp, line 338 "
Where line 338"
Where line 338 is the "LiveProperties.Open()" of the above recordset, when i try to view bindings on this recordset Dreamweaver gives me the following errors -
"Column 'dbo.easytoletproperty.propertylive' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause.
Column 'dbo.easytoletproperty.propertylocation' is invalid in the select list because it is not contained in an aggregate function and there is no GROUP BY clause."
It seems that there should be a solution for my situation, but for the life of me I can't seem to figure it out.
I need to compare two "like" tables, containing similar data. Tbl 1 is "BOOKED" (which is a snapshot of inventory) and tbl 2 is "CURRENT" (the live - working inventory table). If I write my query as follows the the subsequent result is "duplicate" data.
Code Block SELECT booked.item, booked.bin, booked.quantity, current.bin, current.quantity FROM BOOKED LEFT JOIN CURRENT ON booked.item = current.item
No matter what type of join I use, there is duplicate data displayed for each table. For example, if there are more bins in the BOOKED table that contain a certain product then the CURRENT table will repeat data and vica versa.
As follows:
Item Bin Quantity Bin Quantity
12345 A01 500 A01 7680
12345 B01 6 A01 7680
12345 C01 20 A01 7680
54321 G10 1032 E15 1163
54321 G10 1032 F20 523
54321 G10 1032 H30 750
98765 Z20 7000 Z20 8500
98765 Y15 2500 Y15 3000
98765 X10 1200 Y15 3000
What I would like to do is display Bin and Quantity only once and the repeating values as NULL or [BLANK]. Or, to display all of the bins from both tables and only the quantities from each table in relation to the bin found in that table, returning a "0" if no quantity exists.
This is what I'm after:
Item Bin Quantity Bin Quantity
12345 A01 500 A01 7680
12345 B01 6 B01 0
12345 C01 20 C01 0
54321 G10 1032 E15 1163
54321 F20 0 F20 523
54321 H30 0 H30 750
98765 Z20 7000 Z20 8500
98765 Y15 2500 Y15 3000
98765 X10 1200 X10 0
Is this possible? If so, how?
I also might add that it is ok for each table to contain multiple entries for any given item. This is basically being requested as an inventory variance report - inventory before physical count and immediatly after physical count - and will only be run once a year.
----------------------------------------------- Just thinking out loud here: What if I created three subqueries, the first containing only BOOKED information, the second containing only CURRENT information and the third being a UNION of both tables? Something like this:
Code Block SELECT q3.bin, q1.item, ISNULL(q1.quantity, 0) as QTY_BEFORE, ISNULL(q2.quantity, 0) as QTY_AFTER
FROM
(select item, bin, quantity from BOOKED)q1 Left Join
(select item, bin, quantity from CURRENT)q2 on q1.item = q2.item Left Join
(select bin, item from BOOKED UNION CURRENT)q3 on q1.item = q3.item
Order By q1.item
I don't know if I wrote the UNION statement correctly, but I will have to try this when I get back to work...
Any one tell me the best process to bind the data to datagrid?I am using this method,it is taking lot of time to fill data to datagrid.
conn = new SqlCeConnection("Data Source=\sample.sdf; Password =''"); dt = new DataTable(); da = new SqlCeDataAdapter(Quary, conn); da.Fill(dt); DataaGrid1.Datasource=dt;
Ok, I'm fairly new to .NET and even newer to the whole database concept. But, don't run away yet, I'm no idiot and I shouldn't have too hard of a time understanding your responses if you're kind of enough to give them. That being said, here's my dilemma:I'm trying to make a database of all the movies I own, the actors in them and the genre (s) they belong to. I have a set of tables that are in the 2NF (I think). I have a movies table, an actors table, a genres table, and two tables called movies_actors and movies_genres with primary-foreign key relationships to pull it all together (e.g. movie_id 1 has two entries in movies_genres, one for Action and one for Drama). My problem arises that when execute my monster query to pull ALL the data on one movie, I get a row returned for every combination of Genres and Actors in a movie. Example:movie_id movie_title comments actor_first actor_last genre_name1 Casino blah blah Robert DeNiro Action1 Casino blah blah Robert DeNiro Drama1 Casino blah blah Joe Pesci Action1 Casino blah blah Joe Pesci Drama And here's the query that produced that:1 SELECT movies.movie_title, movies.comments, actors.actor_first, 2 actors.actor_last, genres.genre_name 3 FROM movies INNER JOIN movies_actors ON movies.movie_id = movies_actors.movie_id 4 INNER JOIN actors ON movies_actors.actor_id = actors.actor_id 5 INNER JOIN movies_genres ON movies_genres.movie_id = movies.movie_id 6 INNER JOIN genres ON movies_genres.genre_id = genres.genre_id So, I want to put all the actors for one movie into the same cell in the datagrid (same with the genres) and still keep it sortable by actor or genre. Is this possible with the .NET 2.0 datagrid? Do I have some fundamental misunderstanding of how my tables should be structured? Am I just really far off and acting like a n00b?
what i'm trying to do is simply display the contents of the sqldata to verify that it works. and it doesn't. i have created a simple database named 'test' and table 'list' with fields: 'name' and 'id'. i have made 3 records as follows:
NAME ID name1 1 name2 2 name3 3
what i did is connect to the database, click and drag it over to the canvas and codes were generated. if i run it, by default it should show all the contents of the table, correct? well, it isn't. i've tried it using a datagrid and it still doesn't work.
is there an access problem with the database? or, what settings to have to make/change in my sql server? by the way, i have MSDE.
' Insert page code here ' Function test() As System.Data.IDataReader Dim connectionString As String = "server='(local)'; trusted_connection=true; database='test'" Dim dbConnection As System.Data.IDbConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [list].* FROM [list]" Dim dbCommand As System.Data.IDbCommand = New System.Data.SqlClient.SqlCommand dbCommand.CommandText = queryString dbCommand.Connection = dbConnection
dbConnection.Open Dim dataReader As System.Data.IDataReader = dbCommand.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
VB.NET 2003 / SQLS2KThe Stored Procedure returns records within Query Analyzer.But when the Stored Procedure is called by ADO.NET ~ it produced thefollowing error message.---------------------------Exception Message: Failed to enable constraints. One or more rowscontain values violating non-null, unique, or foreign-key constraints.------------------------------------------------------Exception Source: System.Data---------------------------If I click OK past the error messages I will get data filling thedatagrid. However not as I would like to see it.Even though it returns the proper data rows and includes all thecolumns I asked for, it also returns plenty of columns I didn't ask for(all the columns of the main table) and all those columns are filledwith "null"In addition each row header contains a red exclaimation mark whch whenhovered over reads;"Column 'cmEditedBy' does not allow DBNull.Values."An interesting thing about this column 'cmEditedBy' is that there isnoting wrong with it and all rows for that column contain data.I believe this error is a mistake! But it probably indicates some otherproblem. How should I track its cause?M O R E ...Below is the code in the data layer, the stored procedure, and the datareturned within query analyzer.\'DataAdapterFriend daView041CmptCyln As New SqlDataAdapter'SqlCommandPrivate daView041CmptCyln_CmdSel As New SqlCommand'Add the commanddaView041CmptCyln.SelectCommand = daView041CmptCyln_CmdSel'SelectWith daView041CmptCyln_CmdSel.CommandType = CommandType.StoredProcedure.CommandText = "usp_View_041Cmpt_ByJobCyln".Connection = sqlConnWith daView041CmptCyln_CmdSel.Parameters.Add(New SqlParameter("@RETURN_VALUE", SqlDbType.Int, _4, ParameterDirection.ReturnValue, False, CType(0,Byte), _CType(0, Byte), "", DataRowVersion.Current, Nothing))'Criteria.Add("@fkJob", SqlDbType.Text).Value = _"48c64a55-874d-40d0-addc-7245f5d9c118"'.Add("@fkJob", SqlDbType.Text).Value = f050View.jobIDEnd WithEnd With//\ALTER PROCEDURE usp_View_041Cmpt_ByJobCyln(@fkJob char(36))AS SET NOCOUNT ON;SELECTJobNumber,DeviceName,ComponentName,Description,Quan,Bore,Stroke,Rod,Seconds,CylPSI,PosA,PosB,PosC,PosD,PosE,HomeIsRet,RetIsRetrac,POChecks,Regulated,FlowControl,PortSize,LoadMassFROM tbl040cmptINNER JOIN tbl030Devi ON fkDevice = pkDeviceIdINNER JOIN tbl020Proc ON fkProcess = pkProcessIdINNER JOIN tbl010Job ON fkJob = pkjobIdINNER JOIN lkp202ComponentType ON fkComponenttype = pkComponentTypeIdINNER JOIN lkp201DeviceType ON fkDeviceType = pkDeviceTypeIdINNER JOIN lkp101PortSize on cmSmallint05 = pkPortSizeIdWHERE(fkJob = @fkJob)--fkJob = '48c64a55-874d-40d0-addc-7245f5d9c118'AND fkComponentType = 2GO//(note - columns are wrapped)\F1111Clip DriverCylinderClip Driver_2 - Top -Cylinder91.2502.250.8752.250NULL01101110011/8 NPTNULLF1111Punch MechCylinderPunch Mech_1 -Cylinder_222.1002.0001.0001.234NULL11000110011/8NPTNULLF1111ClipDriverCylinderBottom92.1002.0001.0001.000NULL11010110011/4NPTNULLF1111Punch MechCylinderPunch Mech_1 -Cylinder_122.1002.0001.0001.000NULL01000110011/8NPTNULLF1111DegateCylinderDegate 1 -Cylinder21.1882.500.8751.000NULL11000110011/8 NPTNULLF1111Clip DriverCylinderClip Driver 1 -Bottom11.1801.250.8751.000NULL00011110011/4 NPTNULL//
Hi, Im trying to pull data from 2 fields in the same table into a SqlDataSource that feeds into a GridView, and display them as 1 field in GridView? I have a database table that has entries of users and their friends. so this tblFriendUser has a column called UserName and another column called FriendUserName. I am trying to get a list of friends for that particular user. Note that if User1 initiated the friend request, he will be listed as UserName and his friend as FriendUserName, but if his friend initiated the friend request, it will be vice versa: him being the FriendUserName and his friend the UserName. So I want the following 2 queries run and merged into one query in order to return 2 columns only: UserFriendID & UserName, is that possible? Is my design bad? Any suggestions/advice would help! Thanks a lot!
SELECT UserFriendID, UserName FROM tblUserFriends WHERE (UserName = @UserName);
SELECT UserFriendID, FriendUserName AS UserName FROM tblUserFriends WHERE (FriendUserName= @UserName);
New to SQL Server Compact Edition and I am getting my feet wet with the following tutorial: http://msdn.microsoft.com/msdntv/episode.aspx?xml=episodes/en/20060831MobileRB/manifest.xml
I follow the tutorial exactly, but the data I edit through the Edit Dialog Form is not saved to the SQL Server table even though all of the edits appear in the datagrid. They never make it back into the table.
As first task I've got Data Flow which loads a set of data into a .NET recordset. After that, inmediately flow execution goes to For..Each Loop. I'd like to avoid go in that direction when Data Flow returns zero rows.
How can I do such thing?
I've tried this on Precedence Constraint Editor but it doesn't work..It doesn't recognize EOF keyword..
I defined a stored procedure with a cursor inside for updating data. When I call it from an MSAccess client, it fails. When I execute it directly in a ISQL/w windows, it doesn`t fail but it displays me the data (wich is the reason for failing from MSAccess). Do somebody know if I could do it without displaying data in the screen ??
I am currently working on a project where I have to import a huge amount of data from CSV files into a database. I don't want to have dublicate keys in my table, but my CSV file contains them. That means the line more at the end of the file contains the mor up to date information that I have to store.
I try to fix this problem since serveral weeks, but my algorithm is very slow and blocks all other processes on the server. At the moment I am copying all records into a temp table that occure more than once in the CSV file. After that I am running through this table line by line and check if the key already exists in the target table and then either make an insert or an update.
We have a relational database (rd) and a data warehouse (dw). This dw has a table (tw) with all key fields (dimension keys) and metric related (measures) fields. This table is populated with monthly data each month. The tw is joined to various look up views present in the dw to obtain name fields from rd. The DBA wants me to remove the look up views. I now have following 2 options that I can think of –
1)Further de-normalize the tw and store the name fields as well. However, there are two issues with this option –
a.The size of tw will grow tremendously. b.We are storing monthly data and the values in the name fields may change after some time. Then we will have to put in additional views/objects to obtain the latest name.
2)Using ETL, obtain the copy of rd tables overnight in dw. We will then join tw with these tables and there will no longer be cross database joins. However, this will be a burden on maintenance and support.
As of now these are the possible options I can come up with. Which one would you suggest and why? If you have another option, please let me know.
I created a database that will be distributed to my customers. This database is running on an Instance of SQL Server 2005 Express edition. I removed the admin logins from my SQL Server Instance so in theory, only my application connecting itself using the Sql Server autenthication will be able to be access the data (using "sa" having a password that I set at the installation).
For now, all this is working fine and after some tests, I haven't been able to access the data in any ways except by using the "sa" and the password my app is the only one to know.
But the problem is coming from a security leak when using User Instance. Indeed, I've been able to create a program getting the content from my MDF file. If somebody try to get connected using User Instance on his own SQL Server instance, he will be able to reach the data.
How could I prevent this to happend? Is there a property or something that could be set into the database that would prevent the database (mdf file) to be used with User Instance?
I have a source sql 2005 with the database collation SQL_Latin1_General_CP1_CI_AS and destination with sql 2012 with the same collation.
But the SQL server llvel collation is different, sql 2005 uses Latin1_General_CI_AI and sql 2012 uses "SQL_Latin1_General_CP1_CI_AS"
Now when i load the data from 2005 for one table to sql 2012 i could see special characters in one column. And i dont see that in the source database. Is there a way to avoid that or is it something we need to manually fix.
I have nine type of buttons, EnrollAmtBTM PlacAmtBTM and so on, I also have a SQL setver view V_Payment_Amount_List from here i need to display the data on the button this is the select value to display when i choose the agency list and the amount corresponding to that agency_ID is displayed here the agency_ID is fetched from the SQL CONDITION THIS IS WHERE I GET FETCH AGENCY DATA WHEN SELECTED i.e SQL CONDITIONprotected void CollectAgencyInformation() { WebLibraryClass ConnectionFinanceDB;ConnectionFinanceDB = new WebLibraryClass(); string SQLCONDITION = "";string RUN_SQLCONDITION = ""; SessionValues ValueSelected = null;int CollectionCount = 0;if (Session[Session_UserSPersonalData] == null) {ValueSelected = new SessionValues(); Session.Add(Session_UserSPersonalData, ValueSelected); } else { ValueSelected = (SessionValues)(Session[Session_UserSPersonalData]); }ProcPaymBTM.Visible = false;PaymenLstBTN.Visible = false; Dataviewlisting.ActiveViewIndex = 0;TreeNode SelectedNode = new TreeNode(); SelectedNode = AgencyTree.SelectedNode; SelectedAgency = SelectedNode.Value.ToString(); Agencytxt.Text = SelectedAgency; Agencytxt2.Text = SelectedAgency; Agencytxt3.Text = SelectedAgency;DbDataReader CollectingDataSelected = null; try {CollectingDataSelected = ConnectionFinanceDB.CollectedFinaceData("SELECT DISTINCT AGENCY_ID FROM dbo.AIMS_AGENCY where Program = '" + SelectedAgency + "'"); } catch { }DataTable TableSet = new DataTable(); TableSet.Load(CollectingDataSelected, LoadOption.OverwriteChanges);int IndexingValues = 0;foreach (DataRow DataCollectedRow in TableSet.Rows) {if (IndexingValues == 0) {SQLCONDITION = "where (Project_ID = '" + DataCollectedRow["AGENCY_ID"].ToString().Trim() + "'"; } else {SQLCONDITION = SQLCONDITION + " OR Project_ID = '" + DataCollectedRow["AGENCY_ID"].ToString().Trim() + "'"; } IndexingValues += 1; }SQLCONDITION = SQLCONDITION + ")"; ConnectionFinanceDB.DisconnectToDatabase();if (Dataviewlisting.ActiveViewIndex == 0) { Dataviewlisting.ActiveViewIndex += 1; } else { Dataviewlisting.ActiveViewIndex = 0; } SelectedAgency = SQLCONDITION; ValueSelected.CONDITION = SelectedAgency;
???? this is where i use to get count where in other buttons and are displayed.... but i changed the query to display only the Payment_Amount_Budgeted respective to the agency selected. from the viewRUN_SQLCONDITION = "SELECT Payment_Amount_Budgeted FROM dbo.V_Payment_Amount_List " + SQLCONDITION; try { CollectionCount = ConnectionFinanceDB.CollectedFinaceDataCount(RUN_SQLCONDITION); EnrollAmtBTM.Text = CollectionCount.ToString(); } catch { }////this is my CollectedFinaceDataCount-- where fuction counts the records in the above select statement if i use for eg. "SELECT Count(Placement_Retention_ID) FROM dbo.V_Retention_6_Month_Finance_Payment_List" here is the functionpublic int CollectedFinaceDataCount(String SQLStatement) {int DataCollection; DataCollection = 0; try { SQLCommandExe = FinanceConnection.CreateCommand(); SQLCommandExe.CommandType = CommandType.Text; SQLCommandExe.CommandText = SQLStatement; ConnectToDatabase();DataCollection = (int) SQLCommandExe.ExecuteScalar(); DisconnectToDatabase(); }catch (Exception ex) {Console.WriteLine("Exception Occurred :{0},{1}", ex.Message, ex.StackTrace.ToString()); } return DataCollection; }
So here mu requirement request is to display only the value fronm the view i have against the agency selected Please help ASAP Thanks Santosh
Why this SQL procedure gives contiguous repeated records ( 3 or 4 times ) ?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ALTER PROCEDURE GetProductsOnPromotInDep (@DepartmentID INT) AS SELECT Product.ProductID, Title FROM Product INNER JOIN (ProductCategory INNER JOIN (Category INNER JOIN Department ON Department.DepartmentID = Category.DepartmentID) ON ProductCategory.CategoryID = Category.CategoryID) ON Product.ProductID = ProductCategory.ProductID WHERE Category.DepartmentID = @DepartmentID AND ProductCategory.CategoryID = Category.CategoryID AND Product.ProductID = ProductCategory.ProductID AND Product.OnPromotion = 1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I am beginner on using SQL. How can I select the repeated rows (five or more times) on a table which have the same ID's but different updated date. I do not need to group all the rows with the same ID,s but rows which are repeated many times according to the required reports needed.
Below are some information regarding tables and views:
Hi I have created a Percent Log Used Alert with a threshold of 85% and am getting e-mailed with Database Mail, the problem is that I continue to get e-mailed repeatedly with the same e-mail until I disable the Alert. Is there any way to have it just e-mail it once?
I have rows coming from the db including: Contract Number, Contract Name, owner and Actions associated with each contract.
SQL statement brings back: Contract Number Contract Name Sales Owner Action 1234 123453 $50 Neil x 1234 123453 $50 Bob y 534232 5464634211 $30 Harry z
The problem is that each contract can have multiple actions associated with it... There ideal output would be:
Contract Number Contract Name Sales Owner Action 1234 123453 $50 Neil x Bob y 534232 5464634211 $30 Harry z
Total: $80
Basically I need to hide and not include repeated items based on a contract number... one idea I had was creating a group based on contract number and then display info in the header and then only owner and actions in the detail section.. The problem is Totals... how can I can it to avoid count the duplicated values..