We have an SSIS package that executes a query to a DB2 database and stores the result set in a variable of type object. The result set is typically ten rows or less. Several steps in the package loop through these rows and do various processing based on the contents of the rows.
We now have the need for other packages to have access to the original result set. These packages might be run minutes or hours after the first package. Is there a simple way to save the original result set in a file and then pick it up for processing later? Unfortunately, using a SQL Server table to store the results is not an option for us at this time.
I am new to SSIS so I'm sure this is easy to do but I can't seem to figure it out. I created a SQL task that creates a result set. I would like to loop through each result of the result set and insert it into another table.
I'm not sure how to map the result set as input to the second SQL task that will do the insert. I can put the variable in the parameter mapping but I don't know what the SQL should look like to insert this into my table. Each row of the result set has five columns. Normally I have something that looks like INSERT...Values(?,?,?,?,?) but because my input parameter is just one result set object this doesn't work.
How to get the CASE results highlighted in BOLD into this equation; "(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked" ? Thank you. CREATE VIEW dbo.vwu_ReportViewASSELECT EmployeeID , LastName , FirstName , LocationCode , UserID , Today , Login , AMBreakOut , AMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) > = 50 AND ISNULL(DATEDIFF(Minute, AMBreakOut, AMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS AMBreak , LunchOut , LunchIn , CASE WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 66 THEN '0' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 67 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 81 THEN '15' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 82 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 96 THEN '30' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 97 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 111 THEN '45' WHEN ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) >= 112 AND ISNULL(DATEDIFF(Minute, LunchOut, LunchIn),0) <= 126 THEN '60' ELSE '75' END AS LunchBreak, PMBreakOut , PMBreakIn , CASE WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 0 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 19 THEN '0' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 20 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 34 THEN '15' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 35 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 49 THEN '30' WHEN ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) >= 50 AND ISNULL(DATEDIFF(Minute, PMBreakOut, PMBreakIn),0) <= 64 THEN '45' ELSE '60' END AS PMBreak , Logout , Comments , LoginLogon , AMBreakOutLogon , AMBreakInLogon , LunchOutLogon , LunchInLogon , PMBreakOutLogon , PMBreakInLogon , LogoutLogon ,(LogOut - LogIn) + (LunchBreak) -(AMBreak) + (PMBreak) AS TimeWorked
I have no idea to write a store procedure or only query to pass a string parameter more than 4000 characters into execute() and return result for FETCH and Cursor.
We already used Oracle Datasatage Server the following Query statement for Source and Lookup.here there is parameter maping in the SQl Statement . How can achive in SSIS the Folowing Querystatment?
Query 1: (source View Query) SELECT V_RDP_GOLD_PRICE.GDR_PRODUCT_ID, V_RDP_GOLD_PRICE.ASSET_TYPE, V_RDP_GOLD_PRICE.PREFERENCE_SEQ, V_RDP_GOLD_PRICE.RDP_PRICE_SOURCE, TO_CHAR(V_RDP_GOLD_PRICE.PRICE_DATE_TIME,'YYYY-MM-DD HH24:MI:SS'), TO_CHAR(V_RDP_GOLD_PRICE.REPORT_DATE,'YYYY-MM-DD HH24:MI:SS'), V_RDP_GOLD_PRICE.SOURCE_SYSTEM_ID FROM V_RDP_GOLD_PRICE V_RDP_GOLD_PRICE WHERE REPORT_DATE = (select max(report_date) from V_RDP_GOLD_PRICE where source_system_id = 'RM' )
Query 2: (look up )
SELECT GDR_PRODUCT_ID, TO_CHAR(MAX(PRICE_DATE_TIME),'YYYY-MM-DD HH24:MI:SS') , TO_CHAR(REPORT_DATE,'YYYY-MM-DD HH24:MI:SS') FROM V_RDP_GOLD_PRICE where GDR_PRODUCT_ID = :1 and report_date = TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') AND PRICE_DATE_TIME BETWEEN TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') - 7) AND TO_DATE(:2,'YYYY-MM-DD HH24:MI:SS') GROUP BY GDR_PRODUCT_ID, TO_CHAR(REPORT_DATE,'YYYY-MM-DD HH24:MI:SS')
please anyone give the sample control flow and how to pass the parameter?
I've run into a problem with SSIS packages wherein tasks that write or copy files, or create or delete directories, quit execution without any hint of an error nor a failure message, when called from an ASP.NET 2.0 application running on any other machine than the one where the package was created from. By all indications it appeared to be an identity/permissions problem.
Our application involves a separate web server and database server. Both have SQL Server 2005 installed, but the application server originally only had Integration services. The packages are file system-deployed on the application server, and are called using Microsoft.SqlServer.Dts.Runtime methods. For all packages that involve file system tasks, the above problem occurs.
When the above packages are run using the command prompt (either DTEXEC or DTEXECUI) the packages execute just fine. This is expected since we are using an administrative account. However when a ShellExecute of the same command is called from ASP.NET, the same problem occurs.
I've tried giving administrative permissions to the ASPNET worker process user to no avail.
I have likewise attempted to use the SQL Server Agent job approach but that approach might not be acceptable for our clients since it means installing SQL Server 2005 Database services on the application server.
I have read the relevant threads in this forum, namely http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1044739&SiteID=1 and http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=927084&SiteID=1 but failed to find any solution appropriate for our set up.
We manage some SSIS servers, which has only SSIS and SSIS tools installed on them and not the sql server DB.
SSIS packages and configuration files are deployed on a NAS. We run the SSIS packages through DTEXEC by logging in to the server.
We want to allow developers to run their packages on their own on the server, but at the same time we dont want to give them physical access on the server i.e we do not want to add them into RDP users list on server properties. We want them to allow running their packages remotely on the server.
One way We could think of is by using powershell remoting and we are working on that. But is there any other way or any tool already present for the same.
I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error: [Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
---------------------------------------------------------------------- I executed it in my SQL Server Management Studio Express and I got: Commands completed successfully. I do not know where the result is and how to get the result viewed. Please help and advise.
HI, I ran a select * from customers where state ='va', this is the result...
(29 row(s) affected) The following file has been saved successfully: C:outputcustomers.rpt 10826 bytes
I choose Query select to a file then when I tried to open the customer.rpt from the c drive I got this error message. I am not sure why this happend invalid TLV record
As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC. Tables I have are structured as follows:
SHOWS showID showTitle
SHOWACCESS showID remoteID
VIDEOS videoDate showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle, (SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID) FROM shows, showAccess WHERE shows.showID = showAccess.showID AND showAccess.remoteID=21 ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate. Can anyone shed some light on where I am going wrong?
I am trying to code a WHERE xxxx IN ('aaa','bbb','ccc') requirement but it the return values for the IN keyword changes according to another column, thus the need for a CASE function.
WHERE GROUP.GROUP_ID = 2 AND DEPT.DEPT_ID = 'D' AND WORK_TYPE_ID IN ( CASE DEPT_ID WHEN 'D' THEN 'A','B','C' <---- ERROR WHEN 'F' THEN 'C','D ELSE 'A','B','C','D' END )
I kept on getting errors, like
Msg 156, Level 15, State 1, Line 44Incorrect syntax near the keyword 'WHERE'. which leads me to assume that the CASE ... WHEN ... THEN statement does not allow mutiple values for result expression. Is there a way to get the SQL above to work or code the same logic in a different manner in just one simple SQL, and not a procedure or T-SQL script.
I'm using a subquery to return a delivery charge line as a column in the result set. I want to see this delivery charge only on the first line of the results for each contract. Code and results are below.
declare @start smalldatetime declare @end smalldatetime set @start = '2015-03-22 00:00' -- this should be a Sunday set @end = '2015-03-28 23:59' -- this should be the following Saturday
In this example, I only want to see the delivery charge of 125.00 for the first line of contract HU004377. For simplicity I have only shown the lines for 1 contract here, but there would normally be many different contracts with varying numbers of lines, and I only want to see the delivery charge once for each contract.
Is it possible from sql to use SAS as an object? And if so how?
I was recently tasked with Data Profiling and sitting next to me is a SAS developer, who just has to run a couple of functions, to do what has taken me days (and I haven't finished!). If I could call out to SAS and run the SAS functions it would be great. I have looked on the net and can see SAS calling out to SQL but not the other way round. Technically I'm probably not up to this but I don't want this to hold me back... so any help would be great.
okay.. Here is my first post from pass. I am here on sunday getting ready for the first of 5 days of nothing but SQL Server Every time i come to this thing i still get excited about the whole community thing.
who else from dbforums is going to be here? i would be interesting to put faces with those names.
in any event i will post interesting tidbits from the event if any come to mind. starting with the microsoft givaway of a copy of std edtion 2005 (when released) to any attendee. you get a coupon and you register a pin on a web site and they will send you a copy upon release. its a nice perk i guess, but msdn and the CTPs kind of take the savoir faire out of it.
is it possible to do:(A)declare @numberofitems Int@numberofitems = select max(itemorder)from store, department, etc.and pass the @numberofitems to a #tempStore table, like:(B)(store, department, @numberofitems,...)I got itemorder but not the number of items in each departmentAlex--Sent by 3 from yahoo part from comThis is a spam protected message. Please answer with reference header.Posted via http://www.usenet-replayer.com/cgi/content/new
Hey everyone I'm having trouble finding a way to pass a particular paramater, my main goal of this is to create a custom paging and sorting control for the DataList, but we wont worry about all the un-nessesarry code, here is what I am dealing with... Sub Page_Load()
Dim Conn As SqlConnection Dim Query As String Dim SqlComm As SqlCommand Dim myDataReader As SqlDataReader
' Define connection object Conn = New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString)
' Define query to retrieve main category values Query = "SELECT [productMainCategory] FROM [User_Products] WHERE [productMainCategory] = @productMainCategory" ' Define command object SqlComm = New SqlCommand(Query, Conn)
' Iterate through records and add to array list While myDataReader.Read() IDList.Add(myDataReader("productMainCategory")) End While
' Close DataReader and connection objects myDataReader.Close() myDataReader = Nothing Conn.Close() Conn = Nothing
' If page has not been posted back, retrieve first page of records If Not Page.IsPostBack Then Paging() End If
End Sub The Entire Point to this bit of code is to open a connection to the database find the category productsMainCategory, count all the fields with the Name 3D Art --> and save that number into an Array List where I will be using it later on in my code......The big old problem here is that it counts every single field in the productsMainCategory, Columb.........I need to figure out how to pass it a parameter so that it only counts my 3D Art --> fields, I have tried using this bit of code but nothing SqlComm.Parameters("@productMainCategory").Value = "3D Art -->"Does anyone have any ideas of how I might go about donig this?Thank You..
I have a stored procedure that I want to pass in a number of months and use it in my where caluse. I need to minus the number of months that as passed in by @TaskMonths. But it is minusing days not months. @TaskMonths intWHERE (tblTasks.Caller = @Caller) AND (tblTasks.DueDate BETWEEN CONVERT(varchar, GETDATE() - @TaskMonths, 101) AND GETDATE()) I apprecaite any help.
I'm trying to pass a comma delimited list of numbers to a parameter to use in an IN of my Where clause. Dim MySqlParamSelected As New SqlParameter("@Selected", SqlDbType.Int) Cmd.Parameters.Add(MySqlParamSelected) MySqlParamSelected.Value = Session("intSelected") WHERE tblSelected.Selected_ID IN (@Selected) It will work if I only pass it one number (e.g. 78), but when I pass it more than one (e.g. 78,79) it fails. Here is the error: Msg 119, Level 15, State 1, Line 4Must pass parameter number 7 and subsequent parameters as '@name = value'. After the form '@name = value' has been used, all subsequent parameters must be passed in the form '@name = value'. Does anyone know how I can correctly pass multiple numbers to use in my IN?
How do i pass a parameter to a stored proc using this command: object SqlHelper.ExecuteScalar (SqlConnection connection, string spName, params object[] parameterValues) let's say that my parameter name is @ID and the value is IDval ..
Does any1 know if when A SQL pass through query is executed in access (to a SQL srv dbase) wether or not access will wait until that call is completed before running other steps (in an macro say). I don't think it does but would appreciate a more definitive answer.
Anybody know if the PASS Conference in Orlando is going to happen or not? The website www.sqlpass.org is in a holding pattern saying that the conference is "POSTPONED," but I would have thought a post about the intention to resched or cancel the gathering would be in order.
I placed a post regarding this issue previously but no success. So I thought I explain everything properly this time in a new post. Thanks
I have created a stored procedure which passes variables to the ssis package and then executes the package. The two variables inside the ssis package are @FileName and @ConnectionPath As you can see from the below stored procedure, xp_cmdshell is used to execute the package. If only the first variable is used in the package and the @connectionPath variable is hardcoded inside the package then package runs fine. Problem is in this particular call as you see below because @ConnectionPath is included.
Error: 2007-08-08 08:46:01.29 Code: 0xC0202009 Source: BaseProfiles2 Connection manager "CounterpartyExposure" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for ODBC Drivers" Hresult: 0x80004005 Description: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". End Error
if only the output is run in the query analyser then the error is:
The identifier that starts with 'Data Source=gblond088sjyMSQL_curves_DEV1, 2025;Initial Catalog=CounterpartyExposure;Provider=SQLNCLI.1;Integrated Security=SSPI' is too long. Maximum length is 128.
I have created this sp to and i cant figure out how to use the top 3 as a paramter. I want to be able to use any # like top1,2,3,4,5 etc. I not sure how to compose the syntax i have my sp below.
set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
-- ============================================= -- Author:<Author,,Name> -- Create date: <Create Date,,> -- Description:<Description,,> -- ============================================= ALTER PROCEDURE [dbo].[sp_moveBackupTables] @serverName varchar(50) --Parameter AS BEGIN
declare @tableName varchar(50) --Variable
--Declare Cursor DECLARE backup_Cursor CURSOR FOR select name from adventureworksdw.dbo.sysobjects where name like 'MyUsers_backup_%' and xtype = 'U' and name not in(select top 3 name from adventureworksdw.dbo.sysobjects where name like 'MyUsers_backup_%' and xtype = 'U' order by name desc)
OPEN backup_Cursor
--Move to initial record in the cursor and set variable(s) to result values FETCH NEXT FROM backup_Cursor INTO @tableName
--Loop through cursor records WHILE @@FETCH_STATUS = 0 BEGIN --dynamically build create table Declare @SQL varchar(2000) Set @SQL = 'CREATE TABLE ' + @serverName + '.dbo.' + @tableName + '( [Id] [numeric](18, 0) NOT NULL, [Field1] [nchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL, [Field2] [numeric](18, 0) NOT NULL, [Field3] [nchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [Field4] [nchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [Field5] [nchar](10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, CONSTRAINT [PK_1' + @tableName + '] PRIMARY KEY CLUSTERED ( [Id] ASC )WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY] ) ON [PRIMARY]'
EXEC(@SQL)
--Insert values into new dynamically created table Declare @backupTableRecords varchar(1000)
Set @backupTableRecords = 'Insert into ' + @serverName + '.dbo.' + @tableName + ' SELECT * FROM AdventureWorksDW.dbo.'+ @tableName
exec(@backupTableRecords)
--Drop old table Declare @dropTable varchar(200) set @dropTable = 'drop table adventureworksdw.dbo.' + @tableName
exec(@dropTable)
--Move to the next record in the Cursor and set variable(s) value(s) FETCH NEXT FROM backup_Cursor INTO @tableName END CLOSE backup_Cursor DEALLOCATE backup_Cursor END
HiWe still use SqlServer 2000 and DTSs.My question is: Can I pass a parameter to a DTS and if yes then how ?We would like to plan our screen like this.The user will input a parameter on the screen/form and then the DTS willbe activated using the value inputed.We do have how to work around it if parameters can't be passed but itwould make things a lot easier and straightforward if we could.Thanks !David Greenberg
Hello, I placed a post regarding this issue previously but no success. So I thought I explain everything properly this time in a new post. Thanks
I have created a stored procedure which passes variables to the ssis package and then executes the package. The two variables inside the ssis package are @FileName and @ConnectionPath As you can see from the below stored procedure, xp_cmdshell is used to execute the package. If only the first variable is used in the package and the @connectionPath variable is hardcoded inside the package then package runs fine. Problem is in this particular call as you see below because @ConnectionPath is included.
Error: 2007-08-08 08:46:01.29 Code: 0xC0202009 Source: BaseProfiles2 Connection manager "CounterpartyExposure" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for ODBC Drivers" Hresult: 0x80004005 Description: "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified". End Error
if only the output is run in the query analyser then the error is:
The identifier that starts with 'Data Source=gblond088sjyMSQL_curves_DEV1, 2025;Initial Catalog=CounterpartyExposure;Provider=SQLNCLI.1;Integrated Security=SSPI' is too long. Maximum length is 128.
