I am using the sample SSIS Event Log reports provided by Microsoft: http://www.microsoft.com/downloads/details.aspx?familyid=526e1fce-7ad5-4a54-b62c-13ffcd114a73&displaylang=en
The Event Log Summary report is showing a negative value for #Abort. Why is the aborted count negative?
Could some one help me to explain what does it means when I ran sp_spaceused on the database it reported ex. -15430kb for unused. Does this mean that the index ran out off space. Do I need to increase space for the database. I will try to run the dbcc check hope it will fix the problem.
Thanks.
every 1 hour my server's computer is restarting !
when the windows finish restarting i open the Event viewer and see that what coused it is the error :
"Report Server Windows Service (MSSQLSERVER) cannot connect to the report server database."
Event 107
source : "Report Server Windows Service (MSSQLSERVER)"
How can i solve it ?
Is there a way to handle an event when the report viewer has completed loading the report? I have handled the report viewer load event but also want to handle an event for when it has completed loading.
I am wanting this because the "report is being generated" message is far off of the screen when I use a large report viewer.
So, on page load I simply make a textbox visible that says "report is being generated". When it completes generating the report, I want it to make that message invisible.
The disposed and unload events don't seem to handle this correctly.
When running SSIS packages, the package execution information is logged in the SYSDTSLOG90 table which contains the following columns.
id
event
computer
operator
source
sourceid
executionid
starttime
endtime
datacode
databytes
message
After executing a package, I found that the values in the "executionid" column are the only ones that are unique. Can we use this to determine what package was run? We are trying to architect a solution that would allow us to determine as to how long a package ran, if it ran into warnings / errors etc., We can easily accomplish this by having our own table and using Global variables within packages, we could insert / update this table. Appreciate any help.
hey. I have a formview - inertitemtemplate. In here I have a button with CommandName="Insert". In code behind under FormView1.ItemInserting I want to be able to abort the inserting in some cases. Is this possible?
View 1 Replies View RelatedOn several occasions I have experienced crashes while running an SSIS package in debug mode. It happens when I start process on Control Flow table and click on Data Flow tab to monitor progress. I have forwarded the error reports and have searched the boards for similar references. Is this problem going to be fixed?
SSIS Data Sources
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05
Copyright (c) 1988-2003 Microsoft Corporation
Standard Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
----------------------
Microsoft SQL Server 2005 - 9.00.3054.00 (Intel X86)
Mar 23 2007 16:28:52
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
Visiual Studio 2005 Professional SP1 SP.050727-7600
.NET Framework 2.0.50727
Hi i have used
http://msdn2.microsoft.com/en-gb/library/ms160724.aspx
to enable custom security in the report server,now custom security sample is working fine with my report server,
So bigger problem is my Software manager ask me to redesighn
UILogon.aspx page ?
Now the bigger problem is when redesign the UILogon.aspx page
I am having lot of problems in the sample ,thing is i cant get any button event from the
code behind it self ?
Error is saying that
"cannot handle Event 'Public Event Click(sender As Object, e As System.Web.UI.ImageClickEventArgs)' because they do not have the same signature."
Whats is the wrong with this ?
regards
sujithf ?
I am currently working to write a progress log for my SSIS packages. So far I am able write a new log entry, update this log entry using OnProgress and OnError Event Handlers. I'd like to take it one step further. Whenever the package ends whether cancelled or finished normally; I'd like to write to my logging table COMPLETED_ABNORMALLY on cancelled or COMPLETED_NORMALLY on a normal finish of the package. I'm not sure where to begin with this process. I'd like to utilize a simple method and event handler.
View 0 Replies View RelatedHi,
We have 8 SSIS jobs which need to be made dependent on the arrival of a single file.
All the flows need to be triggered based on the presence of a file
Whats the way to do this
Thanks
Manish
SSIS Checkpoint and restart event handling.
I am using checkpoints in my SSIS packages which determines the step at which the package failed the last time and restart at that step.
But i need some other task also to kickoff only during restart? There is not an OnRestart handler as OnError in SSIS.
How can i do this ?
hi!
I am using a simple Data Flow within a Squence Controller and have added a Event Handler for OnPostExecute which contains a simple insert to a table, but this is not working. My package gets successfully execute but data is not getting inserted in the table used in Event Handler. I have also tried OnError, OnPackageFailer etc... but no results. Please guide.
Hi everyone,
I'd like to alter OnInformation event in order to add more parameters (as TaskHost). Is it possible? I've tried but appears an error:
OnInformation' cannot to implement OnInformation' because of it doesn't exists on the Microsoft.SqlServer.Dts.Runtime.IDTSEvents'
Sub OnInformation(ByVal taskHost As TaskHost, ByVal [source] As DtsObject, ByVal informationCode As Integer, ByVal subComponent As String, ByVal description As String, ByVal helpFile As String, ByVal helpContext As Integer, ByVal idofInterfaceWithError As String, ByRef fireAgain As Boolean) Implements IDTSEvents.OnInformation
I suppose that I must add an overload method but how?
Thanks for you help/advices,
Enric
Hi
I'm still fairly new to some of SSIS's enhanced funtionalities, one of them being Event handlers. I have tried creating a simple package, that simply contains a SQL Execute task that basically creates a simple table. Now i have then added a OnPostExecute even handler as a test which basically runs a script task that simply shows a msgbox. I have gone to execute the package, however after the completion of the SQL Execute task, nothing happens, the even handler doesnt get fired for some reason, i switch to the even handler page and the script task has not been executed. It is like this for every event handler i have tried, even the OnError event. Could this be a problem with my installation of SSIS or have i done something wrong?
Any help would be greatly appreciated as i have done SSIS training and to create an event handler was never this hard!
Regards
Singstar
Is it possible to launch an SSIS package after a SQL event takes place? I need to run a package after a customer order is placed. Can a trigger in SQL launch the package?
View 1 Replies View Related
I have an SSIS Package that loads data to a SQL Server table and also logs package statistics along the way with individual SQL statements. In the event of failure, I want the data loaded to the target table rolled back but I want the statistics updates saved to the database. My package consists of several Execute SQL tasks that handle the logging and a Data Flow task that loads the data to the target table along with a couple of event handlers to handle errors. I have the Transaction Option property on the Package set to Required, to Supported on the Data Flow, and to Not Supported on the Execute SQL tasks and the OnError Event Handlers.
When we run the package (and cause an error) everything runs fine until it gets to the On Error event handler for the Data Flow task. This task hangs and never finishes. If we set the Transaction Option for the Event Handler to Supported (allowing it to enlist in the parent transaction) it works but the updates that it makes roll back along with the data from the Data Flow.
Is there a problem with having Event Handlers stay out of a transaction started by the parent package?
Any help would be appreciated.
We are using MSDTC to handle our transactions and some clients seem to be getting these errors more and more when we went to framework 2.0. Any ideas what could be causing this?
Before in framework 1.1 we would ask our clients to re-register their computer into the domain and/or rename their computer and this worked but it seems like in framework 2.0 it doesn't do the trick. Also, the wrong dns setup causes this too but after trying to fix both things it still doesn't work. I believe this error means either the server has finished the transaction and can't find the client to return the result or the active directory account/computer account is corrupted. Any ideas?
The transaction has already been implicitly or explicitly committed or aborted.
Type: TransactionException
StackTrace:
Server stack trace:
at System.Transactions.Oletx.OletxTransactionManager.ProxyException(COMException comException)
at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts)
at System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction tx)
at System.Data.SqlClient.SqlInternalConnection.Enlist(Transaction tx)
at System.Data.SqlClient.SqlInternalConnectionTds.Activate(Transaction transaction)
at System.Data.ProviderBase.DbConnectionInternal.ActivateConnection(Transaction transaction)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
Previously
Hi guys.
View 1 Replies View RelatedI would like to create an event handler that would catch any errors that result from a sys.<table> not existing. The package is designed to run on both SQL Server 2000 and SQL Server 2005 and when I query sys.<tables> there is an error when the query is run on SQL Server 2000. I just need a good starting point...I would like something that when the server isn't 2005 it just skips the server and doesn't fail the package and doesn't get counted towards the max error count. Thanks for any help.
-Kyle
Hi,
Is it possible to do an event based scheduling of SSIS packages from SQL Server Agent? Like schedule a package to run when a file is available in a particular folder.
Does anyone have any similar experiences to share?
Regards,
Emil
Has anyone used Checkpoint files in conjunction with the OnError Event Handler ? I'm having a problem getting the OnError event to fire when the SSIS package reruns with the Checkpoint file.
The first run of the package (without a checkpoint file) works fine. The error occurs, the OnError event handler is called, the package stops and the checkpoint file is created.
When the package is restarted is goes to the correct spot (where the error occured) using the checkpoint file, then it throws an error within the For Loop container and does not call the OnError event handler. The OnError event handler is setup on the For Loop container. The ForLoop performs three loops. Each one of these loops creates an error. Not one of these errors within the three loops will trigger the OnError event handler...
Any help would be appreciated.
thanks
This morning I needed to update some bad address's in our production DB. I ran this query in ISQLW:
UPDATE mytable SET city = 'blah' WHERE city <> 'blah'
GO
it should have been:
UPDATE mytable SET city = 'blah' WHERE city <> 'blah' AND name = 'blah'
GO
So I basically started updating my entire DB rather than just a handful of records. The query seemed to be running too long (30seconds) then I noticed and clicked the Cancel button. Does this transaction get rolled back when you click cancel? Im not sure where to look to see if the rollback occurred.?
I do have a way to re-update all the address's and a backup but Ive never restored and Im not sure I even need to. I could also run a query to group all the address's but it will be very difficult to tell what got updated. Where talking about 500k records.
Thanks!
Hello,
I am connecting with various sqlservers in a package to get the information. If connection failed with any sqlserver, package failed after 3 tries.
I would like that if connection failed with any sqlserver, package should not end rather move ahead and connecto next sqlserver.
I already tried to increase the number of error from 3 to 1000 but still package failed as soon sqlserver connection failed.
Any help is appreciated.
Thanks.
--
Farhan
Context: I have a web page that uplaods a file that is then imported to the database via an SSIS package.
Problem: If and when the package encounters an error, I want to surface that error to the user via the web page.
Approach: I derived my own class from the DefaultEvents class and then overrode the OnError event handler to catch any errors raised during package execution. I then pass my class to the package Execute method.
Results: The OnError is triggered, but I don't know how to abort package execution nor how to pass the error context to the user. I tried raising a custom exception in the OnError handler, but it failed to propogate to the calling code (ie the code that executes the package).
Another approach would be to write to a database table and then do a query from my web page after the package is done executing (alternatively, I could generate a log file). Seems like a lot of work though. All I want is to pass the error context back to my calling code so I can tell the user what happened.
Thanks in advance for your help.
My project currently has task which have their own individual event handlers that get called onError (setup event messages). I also have a package level event handler that performs a generic task (sending events to the windows eventviewer) In the package level event handler there is a script task that decides on a boolean variable whether to "Success" or "Failure" to different task. When I fail one task of the main control flow, the task level event handler runs, then the package level event handler runs, and then it also runs again for some unknown reason. The second time it runs it picks up the value of a variable set in the variables window. However, I change this value at runtime to the value from a database. I can't understand why it would run the second time, and if it did run why it would have the value from the variables window and not the value that is set in memory. It's like the event handler runs with the value from memory and then runs and picks the values back out of the variables window, replacing the db values and re-runs.
Maybe the package itself is failing all together and then re-runing the package level event handler?
Any help would be greatly appreciated.
-Chris
Hi Guys, I have a SQL block which I want to run based on some values in the DB
-----------------
I am implementing the check as follows..
---------------------
PRINT 'Checking the DATABASE name and Schema Version '
SET NOCOUNT ON
CREATE TABLE chkversion (table_name VARCHAR(30), id INT, reason varchar(200))
GO
DECLARE @MSG CHAR(1)
print @MSG
GO
/* Make sure user is running the right script and right db user */
declare
@ver varchar(100),
@username varchar(100),
@cnt int
begin
select @ver = value from propertytable where id = 33086
select @cnt = count(*) from propertytable where parentid=5001 and propertyid = 726;
select @username = db_name(dbid)from master.dbo.sysprocesses where status ='runnable'
insert into chkversion (table_name, id, reason) values ('', -1, 'You are logging on Database - ' + @username)
insert into error_report (table_name, id, reason) values ('', -1, 'Your agile database version is ' + @ver)
if (@ver != '9.0.144'or @cnt !=0) begin
insert into chkversion (table_name, id, reason) values ('', -1, 'STOP: Your Schema Version and/or database version are not at original 90SP2. Please abort!')
end
else
insert into chkversion (table_name, id, reason) values ('', -1, 'PROCEED: You can run this script to upgrade your db schema from 9.0.144 to 9.0.178')
end
GO
DECLARE @MSG CHAR(200)
SELECT @MSG = convert(varchar(255), reason) from chkversion where id = -1
print @MSG
GO
DECLARE @MSG CHAR(1)
print @MSG
GO
SET NOCOUNT OFF
----------------------------------------------------------
After this, I want user to press 1 to continue or CTRL +C to abort based on the output message from above.
How Do I implement this feature?
In Oracle, I use...
Accept agproceed number prompt 'Enter 1 to continue or CTRL C to abort.';
Recently we migrated our environment to 2012.
We are planning to implement Xevents in all the servers in place of Trace files and everything is working fine.
Is it possible to configure Extended event to trigger a mail whenever any event (example dead lock) occurs.
I have gone through so many websites but i never find.
My SQL Server 2005 SP4 on Windows 2008 R2 is flooded with the below errors:-
Date 10/25/2011 10:55:46 AM
Log SQL Server (Current - 10/25/2011 10:55:00 AM)
Source spid
Message
Event Tracing for Windows failed to send an event. Send failures with the same error code may not be reported in the future. Error ID: 0, Event class ID: 54, Cause: (null).
Is there a way I can trace it how it is coming? When I check input buffer for these ids, it looks like it is tracing everything. All the general application DMLs are coming in these spids.
I have been testing with the WMI Event Watcher Task, so that I can identify a change to a file.
The WQL is thus:
SELECT * FROM __InstanceModificationEvent within 30
WHERE targetinstance isa 'CIM_DataFile'
AND targetinstance.name = 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Backup\AdventureWorks.bak'
This polls every 30 secs and in the SSIS Event (ActionAtEvent in the WMI Task is set to fire the SSIS Event) I have a simple script task that runs a message box).
My understanding is that the event polls every 30 s and if there is a change on the AdventureWorks.bak file then the event is triggered and the script task will run producing the message.
However, when I run the package the message is occurring every 30s, meaning the event is continually firing even though there has been NO change to the AdventureWorks.bak file.
Am I correct in my understanding of how this should work and if so why is the event firing when it should not ?
Server 2003 SE SP1 5.2.3790 Sql Server 2000, SP 4, 8.00.2187 (latest hotfix rollup)
We fixed one issue, but it brought up another. the fix we applied stopped the ServicesActive access failure, but now we have a failure on MSSEARCH. The users this is affecting do NOT have admin rights on the machine, they are SQL developers.
We were having
Event Type: Failure Audit
Event Source: Security
Event Category: Object AccessEvent ID: 560
Date: 5/23/2007
Time: 6:27:15 AM
User: domainuser
Computer: MACHINENAME
Description:
Object Open:
Object Server: SC Manager
Object Type: SC_MANAGER OBJECT
Object Name: ServicesActive
Handle ID: -
Operation ID: {0,1623975729}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: Domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: User
Client Domain: Domain
Client Logon ID: (0x0,0x6097C608)
Accesses: READ_CONTROL
Connect to service controller
Enumerate services
Query service database lock state
Privileges: -
Restricted Sid Count: 0
Access Mask: 0x20015
Applied the following fix
http://support.microsoft.com/kb/907460/
Now we are getting
Event Type: Failure Audit
Event Source: Security
Event Category: Object Access
Event ID: 560
Date: 5/23/2007
Time: 10:51:23 AM
User: domainuser
Computer: MACHINE
Description:
Object Open:
Object Server: SC Manager
Object Type: SERVICE OBJECT
Object Name: MSSEARCH
Handle ID: -
Operation ID: {0,1627659603}
Process ID: 840
Image File Name: C:WINDOWSsystem32services.exe
Primary User Name: MACHINE$
Primary Domain: domain
Primary Logon ID: (0x0,0x3E7)
Client User Name: user
Client Domain: domain
Client Logon ID: (0x0,0x60D37C1A)
Accesses: READ_CONTROL
Query service configuration information
Query status of service
Enumerate dependencies of service
Query information from service
Privileges: - Restricted Sid Count: 0 Access Mask: 0x2008D
Hi all,
Can we get the event properties by using a query?
Are there any extended stored procuder to get the above?
Scenario:
>Desktop>Right Click on My Computer
>Go to Manage and click
>Expand System Tools
>Expand Event Viewer
>Application
click on one event.We can get the log info which is the manual procudure.
But now i want to get the event properties through the Query analyzer...
Any help would be great?
Thanks,
We recently upgraded to SQL 2005 from SQL 2000. We have most of our issues ironed out however about every 1 minute there is a message in the Application Event log and the SQL log that states:
EVENT ID 18456 Login Failed for the users DOMAIN/ACCOUNT [CLIENT: <local machine>]
This is a state 16 message which I thought meant that the account does not have access to the default database. The account is actually the account that the SQL services run under.
Any ideas? We can't seem to figure this one out. We actually upgraded to 2005 from 2000 and had an error appear after every reboot that prevented the SQL Agent from running(This application has failed to start because GAPI32.dll was not found. Re-installing the application may fix this problem.) We did a full uninstall of SQL and reinstalled fresh and restored the databases from .bak files and that is when the EVENT ID 18546 started occuring every minute.
We don't have any SQL heavy hitters here so please be detailed with any possible solutions. That you very much for any help you can provide!
David
I know a WMI event watcher can be used to watch for a new file being added to a folder. However, I need to check for new folders being added to an existing folder. I haven't been able to find a post on doing this. Is there a way in WQL to check for a new folder being added instead of a new file? I've used SQL for years, but am new to SSIS.
View 2 Replies View Related