Could anyone, please, explain to me why I have negative values in
RowModCtr column in sysobjects table? I have tested that after I update
statistics the RowModCtr column is reset to 0. But why do I have
negative values in the first place? Thx.
calculating profit... how do I write an update query that will correct the gross profit calculated column for all negative qty transactions
Basically in the stored procedure that creates the table the query includes:
Profit = CASE Sale WHEN 0 THEN 0 ELSE (Sale - Cost) END,
which is wrong when sale and cost is negative the formula becomes
(-Sale + Cost).... I want it to be -(Sale-Cost) (where sale any cost ignores negative sign.....
but i dont know to write this....any ideas???
I have the following query, I would like to know if I can replace negative values with a zero and if a posiive value appears then leave the value alone?
SELECT TimeStamp, Tag1,Tag2,Tag3
FROM dbo.keller8
hi,
In the result of a function in my query, there are negative numbers.
How do I replace them with a 0 or is there a function like ISNULL that replaces the values that are negative?
thanks,
maarten
Hi,
I´m working with chart type bar (Simple Bar) and i received four values from stored procedure, all values are negative numbers. The Reporting Service shows the values in the chart, but, doesn't show the "bars".... If one of four values will be positive, the report shows the values and the "bars" but if all values will be negative, the report shows just de values.
What do I do for the bars appear with four negative values ?
Thanks.
Hi,
I have table with a column which has both negative and positive values.
I want to calculate the sum of positve values and the sum of negative values from that column separately. Is it possible.
Plase help me.
Ex: My Input Values are
column1
-186.5499257
-141.8985222
-95.3846883
-71.1359768
-69.39071172
30.44750844
40.33666032
53.81527872
98.2967252
112.948667
OutPut goes like This
Column1 Column2
-186.5499257 null
-141.8985222 null
-95.3846883 null
-71.1359768 null
-69.39071172 -564.36
30.44750844 null
40.33666032 null
53.81527872 null
98.2967252 null
112.948667 335.84
Hello everybody,
I have a DTS package that imports excel spreadsheets.
The excel spreadsheet cells contain numbers based on vlookups. Now negative values appear in these cells as -999 but when loaded into the table they appear as (999).
Is there anyway way to configure it to just load -999? The tricky part is I don't have control over the format of the spreadsheet cell and the destination table field is varchar. I am hoping there is some way that the DTS interprets and picks up the value as it is displayed in excel.
Or do I have to stick with converting it manually by replacing '(' and ')' with nothing and appending '-'?
Thanks for any help.
I have a bubble map which contains negative values for the data field.
If I Preview a bubble map report within Visual Studio, I can get the expected result.
However, once I deploy this report I cannot get any data back from the report (see screenshot below)
Once Deployed and viewed in IE:
Why this is occurring?
Also, the data field options in the Layer Wizard are SUM and COUNT. Can these be changed?
Hi,
I'm starting out with Visual Studio 2008 and SQL Server CE and have come unstuck at the first hurdle.
I have performed the below simple steps:
1. I have created a table with an identity field in it. The identify increment is a positive value (1). This works fine and I can populate data to the table directly.
2. I drag the table adapter from the dataset to a form to create a datagrid form.
When I run this form, the field for the identify column populates with negative values and when I go to save the record the application errors.
Note: this only happens with SQL Server CE. I do exactly the same with a server based db and get positive increments via the form.
The simple-ugly solution is to just set a negative increment in the table to match what is going on via the form, but this strikes me as a cop out. It is most likely that I am overlooking something obvious and I would be very appreciative if someone could point me in the right direction.
Thanks,
Julian
I have a table that displays a bunch of data based on their percentage changes.
There is a parameter (let's say 5%) that the user can set to display only the data which either increased more than 5% or decreased more than 5%.
I want to have a space between the positive changes and the negative changes. ie, to create a blank row between the +'s and the -'s. Does anyone know of a way to do this?
Thanks,
Steven
MS SQL Server 2008 R2
I have both positive and negative values in a single column, where I want sum total of positive values & negative values. Is there any Expression for this to sort out.
How can you modify the crdate in sysobjects?
View 1 Replies View RelatedI am not aboe to view the userdefined tables in sql 2005. not sure whether my user dont have permission to view. how to view my user permission or not ..
another one , is there any table to find system table instead sysobjects,information_schema in 2000.
Any idea what are different types in sysobjects table? How can I seperate views only?
select distinct type from sysobjects
type
----
P
U
S
V
K
D
R
I would very much like to create a trigger on the sysobjects table in my database. When I attempt to do so, I get a permission error. Is there some way I can change the permission setting to allow me to do this?
Thanks.
HI there , i have recently upgraded my publishers to 2005.
Transactional replciation seems to be running fine.
However in SS2000 i always used to query sysobjects on replinfo to see if a table was replicaed and how it was replicated, 1 = snapshot , 3 = transactional etc.
However after upgrading replinfo on sysobjects is 0 for all my articles, whats up with this ?
Must i use sp_helparticle only now? Also how does the system know if an object is replicated now , i used to think it used the replinfo column on sysobjects, how is this different in 2005?
Thanx
Hi all,
I have a question about accessing a specific column from the database.
I know when we use: select name from sysobjects would select all the table names and the constraints from the database. I want to select all the column names in each of the table. How can I go about doing this.
Thank you
Hi there,
Once in a while, I find down there are some missing objects in production database. Because we share the sa password with couple of developers, therefore, it's hard find down who did it. So, I try to create a trigger in sysobjects table to prevent this problem, however, I keep getting the error message "error 229: create trigger permission denied on object 'sysobjects'"
although I log in using sa. Can someone give me some suggestions how to prevent this from happening beside using trace profiler and also why do I get the denied message when create trigger on sysobject even with sa login.
Thanks in advance
hi,
can any one tell what is the difference between data in xtype and type columns in sysobjects?
Hello everyone.
I'm facing to a serious problem.
I wanted to migrate SQL 2000 -> SQL 2005.
First of all, I tried to attach my *.mdf file to SQL 2000. but It was not only failed but also SQL 2005 failed to recover my *mdf file.
Now, I think my *.MDF file has system tables for SQL 2005 because when trying to attach *.mdf to SQL 2000 engine send the following message :
--------------------------------------------------------------------------
Msg 906, Level 22, State 2, Line 1
Could not locate row in sysobjects for system catalog 'Sysobjects' in database 'rudol.net'. This system catalog should exist in all databases. Run DBCC CHECKTABLE on sysobjects in this database.
--------------------------------------------------------------------------
Also, I tried again to attach the *.mdf to SQL 2005 but SQL 2005 doesn't really works.
Stupidly, I didn't back up the *.mdf file.
How do I attach it to SQL 2005 or recovery "sysobjects" table for SQL 2000?
Please answer.
P.S.
Forgive my terrible English. English is not my mother tongue.
HI friends,
i have deleted the 'sysobjects' table by accident. then follows the problem.
1. default value constraint not working
2. auto increment constraint not working
is that because of this sysobjects problem.
help me out to fix this problem...
hav fun, njoy
sundaram
Hi,I'm using "select [name] from sysobjects where OBJECTPROPERTY(id,N'IsUserTable') = 1" to get all user-defined tables(about 17000tables)and found out there are tables missing in sysobjects.How can I refresh/rebuild sysobjects table?is there a better way to get a list of user-defined tables?thanks,
View 2 Replies View RelatedEveryone,
Is there a reference to describe the relevance of the Category column in the sysobjects table? I'm trying to track down stored procedures that are set to automatically run at startup and the only thing I can find that is consistent about those that are set to autorun is that they have a value of 16 in the Category column. Is this consistent? What else may I glean from this column?
Thanks
Tim
I have a question about the xtype field in the sysobjects view. What do these characters mean? I think I've found lists, but are they complete?
What is the difference between FN and FS?
I would like to know how can i check from SQL statement that
whether LinkedSERVER exists or not like we search a table from "sysobjects"
Is there a way where i can search my LinkedServer exists ?
if exists (select * from sysobjects where name = ['mylinkedserver'])
Hey all,
Not sure how I did this, but I dropped a table and it still shows up in sysobjects. This breaks a job that rebuilds indexes because the table doesn't exist. I tried recreating and dropping the table, but the extra entry is still there. Would it be okay to just delete the row from sysobjects? This has happened in a 2000 and 2005 db at the same time.
Thanks for any advice.
Reposted from 2000 area per suggestion. The site is running SQL 2000 build 2187.
I've got an 'accidental client' (sister company without a DBA at the moment) who has a problem that I've never seen before. They have a table that SQL claims to not exist in sysobjects. But it does exist in sysobjects as a User Table:
quote:select * from MyTable
Msg 604, Level 21, State 5, Line 1
Could not find row in sysobjects for object ID 55671246 in database 'MyTable'. Run DBCC CHECKTABLE on sysobjects.
dbcc checkdb ('MyDatabase')
Msg 2501, Level 16, State 1, Line 1
Could not find a table or object named 'MyTable'. Check sysobjects.
Msg 2501, Level 16, State 1, Line 1
Could not find a table or object named 'MyTable2'. Check sysobjects.
Msg 2501, Level 16, State 1, Line 1
Could not find a table or object named 'MyTable3'. Check sysobjects.
Msg 2501, Level 16, State 1, Line 1
Could not find a table or object named 'MyTable4'. Check sysobjects.
Msg 2501, Level 16, State 1, Line 1
Could not find a table or object named 'MyTable5'. Check sysobjects.
DBCC results for 'routingengine_historical'.
DBCC results for 'sysobjects'.
There are 483 rows in 14 pages for object 'sysobjects'.
DBCC results for 'sysindexes'.
There are 310 rows in 21 pages for object 'sysindexes'.
DBCC results for 'syscolumns'.
There are 839 rows in 20 pages for object 'syscolumns'.
DBCC results for 'systypes'.
There are 26 rows in 1 pages for object 'systypes'.
DBCC results for 'syscomments'.
There are 470 rows in 35 pages for object 'syscomments'.
DBCC results for 'sysfiles1'.
There are 3 rows in 1 pages for object 'sysfiles1'.
DBCC results for 'syspermissions'.
There are 145 rows in 1 pages for object 'syspermissions'.
DBCC results for 'sysusers'.
There are 19 rows in 1 pages for object 'sysusers'.
DBCC results for 'sysproperties'.
There are 0 rows in 0 pages for object 'sysproperties'.
DBCC results for 'sysdepends'.
There are 421 rows in 4 pages for object 'sysdepends'.
DBCC results for 'sysreferences'.
There are 4 rows in 1 pages for object 'sysreferences'.
DBCC results for 'sysfulltextcatalogs'.
There are 0 rows in 0 pages for object 'sysfulltextcatalogs'.
DBCC results for 'sysfulltextnotify'.
There are 0 rows in 0 pages for object 'sysfulltextnotify'.
DBCC results for 'sysfilegroups'.
There are 1 rows in 1 pages for object 'sysfilegroups'.
CHECKDB found 0 allocation errors and 0 consistency errors in database 'MyDatabase'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
dbcc checktable ('MyTable') with ALL_ERRORMSGS
Msg 2501, Level 16, State 1, Line 1
Could not find a table or object named 'MyTable'. Check sysobjects.
dbcc checktable ('sysobjects') with ALL_ERRORMSGS
DBCC results for 'sysobjects'.
There are 483 rows in 14 pages for object 'sysobjects'.
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
I've fully verified the correct existence of the table and how it links to the object ID by running statements like:
quote:select * from sysobjects where name = 'MyTable' and type = 'U'
select object_id('MyTable')
select object_name(55671246)
Odd that when selecting data from the table the error refers to the database by the table name. Running checktable on sysobjects shows no errors.
Running sp_help 'MyTable' works and shows the expected results as far as columns, indexes, and such. The table structure is fully visible in Management Studio and can be visually explored. Only when querying data is there an issue.
All tables are owned by dbo.
Ideally I need to recover these tables. If that is impossible, I'd like to remove the tables and cleanly free up all the related data pages.
Any thoughts?
Hi,I'm trying to determine with my program whether or not a given databasesupports a given feature set. To do this I'm querying for certain storedprocedures in the sysobjects table and if they are present, making theassumption the database will support the given feature. The problem is Ican't find a certain stored procedure in the sysobjects table, even though Iknow it exists and can see other similar procedures using:select * from dbo.sysobjects order by nameIts as if all of my other stored procedures are in the sysobjects tableexcept this one, the one I'm specifically querying for. Are there certainreasons why a proc won't appear in the sysobjects table? Is this somethingI need to fix?Thanks,Robin
View 4 Replies View RelatedHi All,
I've written a scalar function in C# for the MS SQL Server 2005 that has to have access to two databases in one instance of a server ("database1" and "database2"). I got information from database1, calculate the name of the database2 and got information from user's tables in the database2. But when I'm trying to get informatin from "sys.tables", "sys.columns", "sysobjects" I always get an error "System.Data.SqlClient.SqlException: This statement has attempted to access data whose access is restricted by the assembly."
All databases are inside one server, I can run this quieries in SQL Server management Studio - could anybody help me what should I set/change to get metainformation from another database in the same server (in fact I need a list of fields of a curtain table).
Thanks,
Alex Gerasimov
P.S. Atrribute [SqlFunction(DataAccess = DataAccessKind.Read)] is in the applicaiton.
All my online research has told me how to get info about a table field's data using the system tables, but I can't find anything that tells how to get that table field's data specifically. Could be that it's difficult to explain so difficult to search on but I know there has to be a way to do this and it can't be that difficult.
How do I use the system tables sysobjects and syscolumns to give me the data from a specific field in a third table?
Basically I don't want to know the field type for a tables field, I want to know that field's value.
Let's say I have a table called tblCompanies and that table has 4 fields. idCompany, companyName, companyState, and companyCountry.
How can I return the value as a command parameter for any one of the 4 fields using sysobjects and syscolumns?
If I were writing dynamic SQL I would do something like this:
set @valueToReturn = exec ('select ' + @fieldNameToReturn + ' from ' + @tableToSearch + ' where ' + @fieldToMatchOn + ' = ' + @valueToMatchOn)
But I don't want to use dynamic SQL, I want to use the existing system tables to write a straightforward query. My nonfunctioning/English version of this would be:
give me the value for the field name I send in as a string (@fieldNameToReturn)
from the table I send in as a string (@tblToSearch)
where (sysobjects.name = @tblToSearch) and (syscolumns.name = @fieldNameToReturn) and (@tblToSearch.@fieldnameToMatchOn = @valueToMatchAgainst)
I'm using sysobjects and syscolumns because that's where I can use my variables for table name and column name to link. I just can't figure out how to get hold of my actual data table and the values in it.
Does that make any sense to anyone? I'm sure someone has had to want something like this.
Thank you, thank you, thank you!
I think this should be a dead easy one.
SQL Server 200.
Can I query to find all the tables in a single schema? I can't for the life of me find this one out!
I'm currently using a dreaded cursor with an exists test to get the results I want but there is surely an easier way!
Cheers,
G
Greetings:I have to do a one-off forceful change of some data in a database. Ineed to disable some FK constraints, make the data change, and thenre-enable the constraints.My process will be:ALTER TABLE TABLE1 NOCHECK CONSTRAINT FK_TABLE1_TABLE2UPDATE TABLE1 SET COLUMN1=2 WHERE COLUMN2='Problem row'ALTER TABLE TABLE1 CHECK CONSTRAINT FK_TABLE1_TABLE2I wanted to get some evidence that the constraints were back up after Idid the 'check constraint' statements, so I looked in sysobjects.There's a status column for the constraints, but I can't make muchsense of the numbers. Most of the FK constraints that I have notchanged are of status 0, but when I NOCHECK a constraint, it goes to2304. When I CHECK it again, it's 2408.Can someone explain this, and suggest a way to double-check that myconstraints are in fact enabled once I run the CHECK statement?Thanks!!
View 2 Replies View Relatedhi all,i was using the system tables namely sysindexes and sysobjects in sql server 2000. But now sql server 2005 is using instead of sql server 2000. Since am using sysindexes and sysobjects, too much time is taking for the execution in sql server 2005. So I need to change the query suitable for sql server 2005.I have read in msdn that the system tables are replaced with corresponding catalog views in sql server 2005. The catelog view for sysobjects is sys.objects. plz check the link http://technet.microsoft.com/en-us/library/ms187997.aspxCould anyone please tell me how to replace the sysindexes and sysobjects in the query without rewriting the query too much. If I can replacesysobjects with just sys.objects, then it will be very helpful. Is it possible? And what about sysindexes. Any help anyone could give would be greatly appreciated!
View 8 Replies View Related