Hi,
i'm calling proc2, proc3 from proc1, as soon as proc1 initiates proc2 kicks in and after completion of proc2 only it will jump to proc3 and so on..right
Please clarify on this.
or it would be great if you refer to any manual which gives details aabout nested stored procedure execution criteria..
any help is greately appreciated..
thanks
Hi all - I'm trying to optimized my stored procedures to be a bit easier to maintain, and am sure this is possible, not am very unclear on the syntax to doing this correctly. For example, I have a simple stored procedure that takes a string as a parameter, and returns its resolved index that corresponds to a record in my database. ie
exec dbo.DeriveStatusID 'Created'
returns an int value as 1
(performed by "SELECT statusID FROM statusList WHERE statusName= 'Created')
but I also have a second stored procedure that needs to make reference to this procedure first, in order to resolve an id - ie:
exec dbo.AddProduct_Insert 'widget1'
which currently performs:SET @statusID = (SELECT statusID FROM statusList WHERE statusName='Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
I want to simply the insert to perform (in one sproc):
SET @statusID = EXEC deriveStatusID ('Created')INSERT INTO Products (productname, statusID) VALUES (''widget1', @statusID)
This works fine if I call this stored procedure in code first, then pass it to the second stored procedure, but NOT if it is reference in the second stored procedure directly (I end up with an empty value for @statusID in this example).
My actual "Insert" stored procedures are far more complicated, but I am working towards lightening the business logic in my application ( it shouldn't have to pre-vet the data prior to executing a valid insert).
Hopefully this makes some sense - it doesn't seem right to me that this is impossible, and am fairly sure I'm just missing some simple syntax - can anyone assist?
Hi, I have two tables:TABLE 1 Table 2========== ==========UID TeamNameTeamID <------------------> TeamID and I am trying to obtain the value of TeamName via a nested stored procedure. However, I am only allowed to obtain the @UID as input parameter. I tried writing the following:Select table2.TeamNameFrom Table1, Table2Where (table1.TeamID=table2.TeamID) and (UID = @ UID)It seems to not work as TeamID was not given. Thus, my other idea of doing this is to:1) Execute a sql to first obtain the TeamID value with the @UID parameter given.then 2)Execute another sql to obtain the TeamName with the result from the first sql as the input parameter.However, I have never worked with nested sql, so it would be great if someone can link me a site that they know. Better yet, write me an example code.Thanks you very much!
View 3 Replies View RelatedIs there a way I can do this? If this statement is true I would like for it to do the update stmt otherwiste do the insert stmt. The code shown below has syntax errors. Any help would be greatly appreciated.
IF (SELECT number, serial
FROM serial
WHERE number = @number and serial is null)
BEGIN
Update Statement
END
ELSE
BEGIN
Insert Statement
END
I have one View say V1 and a Table T1
the Structure is say V1 (a,b,a,d) 4 fields
T1 has (e,f,g,h,i,j ) 6 fields
I want to loop through The V1 view and for each record in the View, after
doing some checks i want to insert a record in the T1 table...
using stored procedures, as there could be thousands of records
Something like this
V1 = Select * from V1
While not V1.EOF
Insert into T1
Wend
I have a stored procedure that returns a list of userIds that are available to the logged in user. I need to be able to use this list of userIds in another stored procedure whose purpose is to simply query a table for all results containing any of those userIds. So if my first Stored Procedure returns this: 2 3 5 6 I need my select statement to do something like this: select UserId, Column1, Column2 from Table1 where UserId = 2 or UserId = 3 or UserId = 5 or UserId = 6 I'm very new to stored procedures, can anyone help me with the syntax for doing this. I'm being pressured to get this done very quickly. Thanks for any help!
View 5 Replies View Related
Hello Guys,
I have a stored procedure. In the stored procedure, I update a value of table field. At the end of the stored procedure, I called another stored procedure. In the second stored procedure, I try to read the value of the field I just updated in the first stored procedure. However, The second stored procedure still get the old value of the field. But, sometimes, it is ok.
Any ideas?
Thanks in advance!
troy
create proc proc1 (@param1 int)
as
begin try
declare @param2 int
begin transaction
exec proc2 @param2
commit transaction
end try
begin catch
if @@trancount > 0
rollback transaction
end catch
i haven't had an opportunity to do this before. I have nested stored proc and both inserts values into different tables. To maintain atomicity i want to be able to rollback everything if an error occurs in the inner or outer stored procedure.
I am calling stored procedure called GetCommonItemCount within another stored procedure called CheckBoxAvailability, the first stored procedure should return a count to second stored procedure and based on that some logic will be executed.
I have 2 problems in that
1. The result is not coming from first stored so the variable called @Cnt is always 0 although it should be 18
2. At the end i need to see in the output the result from second stored procedure only while now i am seeing multiple results of record sets coming.
I have attached the scripts also, the line i described in step1 is
Everytime I execute this script - I am not getting the result I want. I was hoping to take the some parameters call one stored procedufre with in the main procedure. I was hoping to assign a variable to the nested procedure and use that variable in the main procedure, but I am getting a '0' as result - however when I call the a inner procedure by itself if get the correct result. Can someone look at this and tell me where I am wrong? It seems to be a scope problem. Thanks set ANSI_NULLS ONset QUOTED_IDENTIFIER ONGO-- =============================================-- Author: -- Create date: September 8,2006-- Description: Inserts a new project-- =============================================ALTER PROCEDURE [echo88].[insertProject] -- Add the parameters for the stored procedure here @name varchar(50), @desc varchar(MAX), @start datetime, @finish datetime, @memid int, @addr1 varchar(32), @addr2 varchar(16), @city varchar(32), @stateid int, @zipcode char(5)ASBEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON; DECLARE @siteid int; EXEC @siteid = insertSite @addr1, @addr2, @city, @stateid, @zipcode; -- Insert statements for procedure here INSERT INTO Project(Title, Description, Start, Finish, SiteID, MemberID ) VALUES ( @name, @desc, @start, @finish, @siteid, @memid );END
View 1 Replies View RelatedHi,
Please tell me how can i write a stored procedure inside another stored procedure.
With Regards,
litu
litu
Hi,
Please tell me how can i write a stored procedure inside another stored procedure.
With Regards,
litu
litu
I cannot seem to get nesting of stored procedures to work. I must have the syntax wrong. Should the following work:
SELECT *
FROM spWod_rptWoStatusSummary
Where spWod_rptWoStatusSummary is a Stored Procedure.
The above does not work. I get an error telling me that spWod_rptWoStatusSummary is an object that does not exit.
Does anyone know what the correct syntax is?
I cannot seem to get nesting of stored procedures to work. I must have the syntax wrong. Should the following work:
SELECT *
FROM spWod_rptWoStatusSummary
(Where spWod_rptWoStatusSummary is a Stored Procedure).
The above does not work. I get an error telling me that spWod_rptWoStatusSummary is an object that does not exit.
Does anyone know what the correct syntax is?
Hi Out There
The attempt to create the following stored procedure, which is supposed to call the previously created stored procedures inside it,
causes the following errors.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferIDTwo'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferIDThree'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Server: Msg 137, Level 15, State 2, Line 1
Must declare the variable '@OfferID'.
Create Procedure spPrepareOfferSimulation
@OfferIDOne int
As
exec spPopulateOfferTables @OfferID
go
exec spPopulateOfferProduct @OfferID
go
exec spPopulateOfferDictionary @OfferID
go
exec spPopulateOfferCondition @OfferID
go
exec spPopulateOfferError @OfferID
go
exec spPopulateOfferLimit @OfferID
go
exec spPopulateOfferQA @OfferID
go
Can someone provide me with some productive input to fix this mess?
I have a caller stored procedure (sp_A) which calls several stored procedures (sp_1,sp_2,sp_3,sp_4, sp_5)
The statements in the called stored procedures sp_1 to sp_5 are all contained within BEGIN TRY -- BEGIN TRAN and BEGIN CATCH blocks which ensure that any errors in the SQL statements are rolled back when an error occurs.
However, I have noticed that when the called stored procedure fails, the caller procedure does not fail Rather it continues processing the remaining sps. I want to add code in my calling sp to stop this fom happening. Any ideas?
I have used this statement within my calling sp but no joy yet.
set @ErrCode = 0
exec @ErrCode = sp_executesql @Sql
if @ErrCode <> 0
begin
return 1
end
Any one with ideas? Thanks
I need the output of a stored procedure in another SP. That's simple (using a temporary table). But there's a small (big error ) problem.
Since I have to manually define the temporary table with it's fields and datatype to recieve the output from the nested SP , this approach would fail if, in the future more parameters are required to be returned . Is it possible to immunise my SP to such a consequence at creation time, rather them having to amend the temporary table later ?
Any idea how to overcome the above problem ? Is there a way that the temporary table can be automatically created like we have in a SQL statement with the INTO keyword. Any ideas ?
Thanks,
Alec
I have a stored procedure that returns a scalar value and I want to use that value (among other places) within another stored procedure.
-- The general purpose stored procedure is far too long to include here but I've included the last several lines of code at the bottom to show general gist of it and how it exits.--
The only way I can find to use that returned value "criteria" in a stored procedure is to define a temporary table, INSERT it into the table and then extract it from the temprary table into the variable where I actually wanted it.... i.e.
DECLARE @CriteriaTable TABLE ( Criteria VARCHAR(8000) )INSERT INTO @CriteriaTable (Criteria) EXEC psp_WRP_DisplayCriteria @UserID, 'Dealers, Prefix, Serial Range, Models, Makes, Sold Date', @UserGroup SELECT @Criteria=Criteria FROM @CriteriaTable
This seems like a ridiculously long winded and confusing way of doing things, especially since Im doing it in a dozen different procedures, half a dozen reports and 1 (so fasr) asp.net/VB web site - and I can't help thinking there must be a better way using just one or even zero extra lines of code to do this.
e.g. SELECT@Criteria = (EXEC dbo.psp etc...)
... or some variation thereof with the correct syntax.
or even better going to where that variable is used and changing ...
EXEC dbo.[psp_InsertWarrantyReportTracking]
@UserID = @UserID ,
@ReportName = 'rptChassisTrackExtdWarranty', -- <------
@ReportCriteria = @Criteria
to ...
EXEC dbo.[psp_InsertWarrantyReportTracking] @UserID = @UserID , @ReportName = 'rptChassisTrackExtdWarranty', -- <------ @ReportCriteria = (EXEC dbo.psp_ etc...)... or some variation thereof with the correct syntax.
But no matter how I try and how I search I can't find any way other than in what is otherwise a completely supefluous temporary table.
Am I missing something or is that REALLY the only way to get a hold of that returned value?
------ Last portion of the general purpose routine I'm trying to call ---------------------If Patindex('%RO Audit%',@Parmlist) > 0
Begin
set @Criteria = @Criteria + '- RO Audit date'
select @All=ROAuditAll, @From = ROAuditFrom, @To = ROAuditTo
from dbo.tblWRParameters where @UserID = UserName
If @All = 1
set @Criteria = @Criteria + '- ALL' + @NL
else
set @Criteria = @Criteria + 'is between ' + rtrim(@From) + ' and ' + rtrim(@to) + @NL
END
--Return the combined parameter field
select @Criteria as Criteria
END
Has anyone faced problems in calling one stored procedure from within another stored procedure ? I am considering using nested SPs, and would appreciate any inputs on it.
Thks,
SC
I have nested a Stored Procedure within a stored procedure. The nested stored procedure ends in a select statement. What I'd like to do is either capture the results of the select statement (it will be 1 row with 3 columns, I only need the contents of first column), or suppress the select statement from displaying in the final results of the Stored Procedure it is nested in.
Is there any way to do either of those?
For every trigger and stored procedure I have a try-catch that writes to an error_log table.
The problem is the inner error is not preserved, always get:
The current transaction cannot be committed and cannot support operations that write to the log file. Roll back the transaction.
As seen below - though commented out:
I tried commiting any transactions - though I didn't create one.
I played with the
XACT_STATE though that was 0
My test case was last procedure has 1/0
Thanks,
Russ
-----------------------------------------------------------
Below is what I have
Step 1)
ALTER Trigger [trg_ActivityLogEntryReportsError] ON [dbo].[ActivityLog]
FOR INSERT AS
DECLARE @ActivityLogID int
,@AlertMessageTypeID int
,@comment nvarchar(max)
,@Error_Source nvarchar(max)
--- etc.
SELECT
@ActivityLogID = ActivityLogID
,@AlertMessageTypeID = AlertMessageTypeID
,@Comment = Comment
FROM INSERTED
BEGIN TRY
if @AlertMessageTypeID = 2 -- activity reported an error
begin
exec proc_CreateAlertLogEntry_forError
@ActivityLogID
,@Comment
update ActivityLog
set flgActivityChecked = 1
where @activityLogId = activityLogID
end
END TRY
BEGIN CATCH
select
@Error_Source = 'trg_ActivityLogEntryReportsError '
,@Error_Procedure = ERROR_Procedure()
--- etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
,Error_Message
--- etc.
)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
---etc.
,@Error_Comment )
-- if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
Step 2)
/*
This will be called by a Trigger
*/
ALTER Procedure [dbo].[proc_CreateAlertLogEntry_forError]
(@ActivityLogID int
,@Comment nvarchar(max))
AS
Declare
@ProcessScheduleID int
,@ProcessID int
--,@comment nvarchar(max)
,@Error_Source nvarchar(max)
---etc
BEGIN TRY
insert into AlertLog
(
AlertMessageTypeID
,comment
,ActivityLogID
)
values
(
2 -- error
,@comment
,@ActivityLogID
)
end
END TRY
BEGIN CATCH
PRINT 'ERROR OCCURED'
PRINT ERROR_Procedure() + ' ' + ERROR_MESSAGE()
select
@Error_Source = 'proc_CreateAlertLogEntry_forError '
---etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
,Error_Message
---etc.
)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
--- etc.)
-- if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
update ActivityLog
set
flgActivityChecked = 1
,UpdatedDate = getdate()
,UpdatedBy = suser_sname()
where
ActivityLogID = @ActivityLogID
STEP 3
ALTER Trigger [trg_AlertLogEntry_SendsOnInsert] ON [dbo].[AlertLog]
FOR INSERT AS
declare
@AlertLogID Int
,@AlertMessageTypeID int
,@Comment nvarchar(max)
,@Error_Source nvarchar(max)
,@Error_Procedure nvarchar(max)
,@Error_Message nvarchar(max)
--- etc.
SELECT
@AlertLogID = AlertLogID
,@AlertMessageTypeID = AlertMessageTypeID
,@Comment = isnull(Comment,'')
,@ActivityLogID = isnull(ActivityLogID,-1)
FROM INSERTED
BEGIN TRY
PRINT 'trg_AlertLogEntry_SendsOnInsert'
PRINT @COMMENT
exec proc_SendEmail
@AlertLogID
,@AlertMessageTypeID
,@comment
,@ActivityLogID
END TRY
BEGIN CATCH
select
@Error_Source = 'trg_AlertLogEntry_SendsOnInsert '
,@Error_Procedure = ERROR_Procedure()
,@Error_Message = ERROR_MESSAGE()
--- etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
-- etc.)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
---etc.)
-- if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
STEP 4
ALTER Procedure [dbo].[proc_SendEmail]
(
@AlertLogID Int
,@AlertMessageTypeID int
,@Comment nvarchar(max) = ''
,@ActivityLogID int = -1
)
AS
declare @AlertSubject nvarchar(512)
,@AlertBody nvarchar(max)
,@myQuery nvarchar(512)
,@profile_name1 nvarchar(128)
,@return_value int
,@mymailitem int
,@Error_Source nvarchar(max)
---etc.
,@Error_Comment nvarchar(max)
,@Test int
/*
@return_value int -- not using at this point but 0 is OK 1 is failure
@mymailitem int -- not using now could store mailitem_id which is on msdb.dbo.sysmail_mailitems
sysmail_mailitems.sent_status could be either 0 new, not sent, 1 sent, 2 failure or 3 retry.
*/
select top 1 @profile_name1 = [name] from msdb.dbo.sysmail_profile
order by profile_id
set @profile_name1 = rtrim(ltrim(@profile_name1))
print '@profile_name1: ' + @profile_name1
print '@comment: ' + @comment
Declare @CrsrRecipient Cursor
BEGIN TRY
PRINT 'proc_SendEmail'
--set @test = 1/0 'test crashing
select
@AlertSubject = 'AlertSubject'
,@AlertBody = 'AlertBody'
,@recipients = 'russ@test.com'
print 'sending email ' + CAST(getdate() as nvarchar(100))
EXEC @return_value = msdb.dbo.sp_send_dbmail
@profile_name = @profile_name1
,@recipients = @EMAILID
,@body = @AlertBody
,@subject = @AlertSubject
,@mailitem_id = @mymailitem OUTPUT
print 'Done ' + CAST(getdate() as nvarchar(100))
print cast(@return_value as nvarchar(100))
update alertlog
set AlertSendStatusID = 1 --sent
where
@AlertLogID = AlertLogID
END TRY
BEGIN CATCH
PRINT 'ERROR OCCURED'
PRINT ERROR_Procedure() + ' ' + ERROR_MESSAGE()
select
@Error_Source = ' proc_SendEmail '
,@Error_Procedure = ERROR_Procedure()
--- etc.
INSERT INTO ERROR_LOG
( Error_Source
,Error_Procedure
---etc.)
VALUES
(
@Error_Source
,@Error_Procedure
,@Error_Message
--- etc.)
update alertlog
set AlertSendStatusID = 2 --error
where
@AlertLogID = AlertLogID
--if @@TRANCOUNT > 0
--begin
--commit
--end
END CATCH
Hi all,
I have 2 sets of sql code in my SQL Server Management Stidio Express (SSMSE):
(1) /////--spTopSixAnalytes.sql--///
USE ssmsExpressDB
GO
CREATE Procedure [dbo].[spTopSixAnalytes]
AS
SET ROWCOUNT 6
SELECT Labtests.Result AS TopSixAnalytes, LabTests.Unit, LabTests.AnalyteName
FROM LabTests
ORDER BY LabTests.Result DESC
GO
(2) /////--spTopSixAnalytesEXEC.sql--//////////////
USE ssmsExpressDB
GO
EXEC spTopSixAnalytes
GO
I executed them and got the following results in SSMSE:
TopSixAnalytes Unit AnalyteName
1 222.10 ug/Kg Acetone
2 220.30 ug/Kg Acetone
3 211.90 ug/Kg Acetone
4 140.30 ug/L Acetone
5 120.70 ug/L Acetone
6 90.70 ug/L Acetone
/////////////////////////////////////////////////////////////////////////////////////////////
Now, I try to use this Stored Procedure in my ADO.NET-VB 2005 Express programming:
//////////////////--spTopSixAnalytes.vb--///////////
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim sqlConnection As SqlConnection = New SqlConnection("Data Source = .SQLEXPRESS; Integrated Security = SSPI; Initial Catalog = ssmsExpressDB;")
Dim sqlDataAdapter As SqlDataAdapter = New SqlDataAdaptor("[spTopSixAnalytes]", sqlConnection)
sqlDataAdapter.SelectCommand.Command.Type = CommandType.StoredProcedure
'Pass the name of the DataSet through the overloaded contructor
'of the DataSet class.
Dim dataSet As DataSet ("ssmsExpressDB")
sqlConnection.Open()
sqlDataAdapter.Fill(DataSet)
sqlConnection.Close()
End Sub
End Class
///////////////////////////////////////////////////////////////////////////////////////////
I executed the above code and I got the following 4 errors:
Error #1: Type 'SqlConnection' is not defined (in Form1.vb)
Error #2: Type 'SqlDataAdapter' is not defined (in Form1.vb)
Error #3: Array bounds cannot appear in type specifiers (in Form1.vb)
Error #4: 'DataSet' is not a type and cannot be used as an expression (in Form1)
Please help and advise.
Thanks in advance,
Scott Chang
More Information for you to know:
I have the "ssmsExpressDB" database in the Database Expolorer of VB 2005 Express. But I do not know how to get the SqlConnection and the SqlDataAdapter into the Form1. I do not know how to get the Fill Method implemented properly.
I try to learn "Working with SELECT Statement in a Stored Procedure" for printing the 6 rows that are selected - they are not parameterized.
I have an sql file that contains several queries that are generating numbers to populate a sql table. The sql file is too large for a single sp so I am nesting them. I have 4 nested stored procedures. Each of the queries in each stored procedure dumps into its own global temp table. The final stored procedure needs to insert into a sql table all the information gathered in the global temp tables. So the final stored proc. looks something like:
"Create procedure usp_myProc_4 AS EXEC usp_myProc_3
INSERT INTO mySQLTable (a,b,c)
SELECT a, b, c FROM ##myTempTable (which was created in usp_myProc_1)
INSERT INTO mySQLTable (a,b,c)
SELECT a, b, c FROM ##myOtherTempTable
INSERT INTO......etc;"
I have done this befor and it worked fine. The only difference is that when I did this before these insert statements were being called from within an sp_makewebtask procedure.
Now when I try to save this final stored procedure it tells me "Invalid Object Name: ##myTempTable"
How do I call on these global temp tables from my final nested stored procedure?
Thanks for any help.
We are migrating a SQL 6.5 application with 1900 stored procedures that use 100's of temp tables to SQL 2000.
A problem we have encountered was that we started out getting an "invalid column" errors on certain procedures. Investigation determined that the error was being generated in a nested procedure. The table that caused the error ended up being a temp table that was created using "select into". The following select statement from that temp table gave the invalid column error.
First thinking it was the "Select Into" we then discovered that the outer most procedure had created a temp table of the same name prior to executing the lower level procedure. After the select into, the next statement was a SELECT that went against what it thought was the inner temp table. However, it grabbed the outermost temp table and then couldn't find the appropriate columns and generated the error.
The solution, of course, was to rename the inner most temp table. We also remove the "select into" in the procedure by explicitly creating the temp table.
We tried creating some test procedures to attempt to reproduce this scenario without complete success.
Our test created 3 procedures (sp1 calling sp2 calling sp3) to mimic the current scenario. Sp1 created a temp table and executed sp2, which executed sp3. Sp3 created another temp table using the same name as the one created in sp1.
If we create all three procedures at the same time, it doesn't matter if we change the order in which they are created or whether we create the inner temp table explicitly or with a "select into", SQL Query Analyzer won't let us create the procedure because it finds that the temp table has been declared twice. If we create the procedures separately however, they compile and allow sp3 to create a temp table by the same name as sp1. After creating the procedures independently, they runs properly in all cases with everything in proper scope and no problems.
Admittedly, this is bad coding to start with, but what is happening with the scope of the temp tables within the stored procedures?
Thanks,
Glen Smith
Hi,I'm adapting access queries to sql server and I have difficulties withthe following pattern :query1 : SELECT * FROM Query2 WHERE A=@param1query 2: SELECT * FROM Table2 WHERE B=@param2The queries are nested, and they both use parameters.In MS Acccess the management of nested queries with parameters is soeasy (implicit declaration of parameters, transmission of parametersfrom main query to nested query)that I don't know what the syntax should be for stored procedures.The corresponding stored procedure would be something likeCREATE TABLE #TempTable (...table definition...)INSERT INTO #TempTable ExecProc spQuery2 @Param2SELECT * FROM #TempTable WHERE A=@Param1And spQuery2 would be : SELECT * FROM Table2 WHERE B=@ParamI was wondering if this syntax would work and if I can skip theexplicit declaration of #TempTable definition.Thanks for your suggestions.
View 5 Replies View RelatedHi there,I have a data manipulation process written in a Nested Stored procedurethat have four levels deeper. When I run these individual proceduresindividually they all seems to be fine. Where as when I run them alltogether as Nested proces (calling one in another as sub-procedures) Logfile is growing pretty bad like 25 to 30GB.. and finally getting kickedafter running disk space. This process is running around 3hrs on a SQLserever Standard Box having dual processer and 2gb ram.This procedures have bunch of bulk updates and at least one cursor ineacch procedure that gets looped through.I was wondering if anybody experienced this situation or have any clueas to why is this happening and how to resolve this?I am in a pretty bad shape to deliver this product and in need of urgenthelp.Any ideas would be greatly appreciated..Thanks in advance*** Sent via Developersdex http://www.developersdex.com ***
View 1 Replies View RelatedHi all,
I had developed all my reports using CRXI and stored procedures of MSSQL 2000. Now I am migrating from CRXI to SSRS. But i have a problem because of my report stored procedures. These stored procedures are complex and nested. When i try to use procedures in a report, it gives a error. When i comment out my EXEC line in my procedures, it goes OK.
Please help me to do this ?
I am new to work on Sql server,
I have One Stored procedure Sp_Process1, it's returns no of columns dynamically.
Now the Question is i wanted to get the "Sp_Process1" procedure return data into Temporary table in another procedure or some thing.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete]
@QQ_YYYY char(7),
@YYYYQQ char(8)
AS
begin
SET NOCOUNT ON;
select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
[Code] ....
I have a requirement to execute an Oracle procedure from within an SQL Server procedure and vice versa.
How do I do that? Articles, code samples, etc???
Anyone can help with this question: thanks
in a asp .net application, I call a stored procedure which have a output parameter.
the output parameter works find in sql session, but not in the asp .net application.
if I put select msg_out = "error message" in position A(see below for stored proc), it works fine
if I put them inside the if statement, the output parameter wont work in asp .net application, but fine in SQL session
The stored proc was created like this:
Create procedure XXXXXXX
(@msg_out varchar(80) OUTPUT
)
as
begin
while exists (*******)
begin
//position A
if certain condition
begin
select msg_out = "error message"
return 1
end
end
end
end
It seems to me that anything inside if - the second begin...end - it wont get executed.
Anyone has got a clue
Any help much appreciated!
Consider a situation where a stored procedure taking a varbinary(max) (BLOB) input parameter then calls a nested stored procedure and passes along that varbinary(max) as an input parameter to the nested stored procedure.
Is a copy of the BLOB provided to the nested stored procedure (passed by value) OR is the BLOB passed by reference.
My interest is in understanding the potential memory hit when handling large BLOBs in this environment.
For example, if the BLOB is 200MB, will SQL server need to allocate memory for a new copy each time it's passed to another stored procedure?
Looks like table type parameters are passed by reference, but I haven't been able to find any info on BLOBS in this context.
Hi,
I would like to use a stroed procedure within another stored procedure ( nested sp )
in a SQL project in VS.NET 2005. Since I have to use "context connection = true" as
connection string, I wont be able to use this connection for another sqlconnection
object. Because its already open. and If i try to use a regular connection string
("server=localhost;...") it will raise a security permission error. Having this
problem, Im not able to use nested stored procedures. Would anyone please give me a
hint how to resolve this issue?