Is this a limitation of SQL server. I am running a quite complex sp that I wrote which uses exec to execute an SQL string. Running the SP produces the desired results but if I try to use this sp with an insert statement then I get an error message that exec cannot be nested in an insert statement.....any help would be appreciated
View 2 Replies
Here is what i am trying to do
select ID, FName, LName
if(SUBSTRING(FirstName, 1, 4)= 'Mike')
Begin
Replace(FirstNam,'Mike','MikeTest')
if(SUBSTRING(LastName, 1, 4)= 'Kong')
Begin
Replace(LastNam,'Kong,'KongTest')
if(SUBSTRING(Address, 1, 4)= '1245')
Begin
.........
End
End
end
from dbo.test1Users
When i do that i get this error
Incorrect syntax near the keyword 'from'.
Thank you for your help
Can anyone show me how to write or post a sample of a nested case statement?
Thanks,
LOC
Hi All,
I'am trying to program a nested CASE statements (if this is not possible, does anyone have any alternate suggestions ?) and I'm getting syntax errors.
The statement is:
SELECT @cmdLine =
CASE @BackupType
WHEN 1 THEN Select @tmpStr =
CASE @initFlag
WHEN 1 THEN 'BACKUP Database ' + @databaseName + 'TO '+ @backupDeviceName + ' WITH INIT, NOUNLOAD, NAME = ' + @backupJobName + ' , SKIP , STATS = 10, NOFORMAT'
ELSE 'BACKUP Database ' + @databaseName + 'TO '+ @backupDeviceName + ' WITH NOINIT, NOUNLOAD, NAME = ' + @backupJobName + ' , SKIP , STATS = 10, NOFORMAT'
END
WHEN 2 THEN Select @tmpStr =
CASE @initFlag
WHEN 1 THEN 'BACKUP Database ' + @databaseName + 'TO '+ @backupDeviceName + ' WITH DIFFERENTIAL, INIT , NOUNLOAD, NAME = ' + @backupJobName + ', SKIP, STATS = 10, NOFORMAT'
ELSE 'BACKUP Database ' + @databaseName + 'TO '+ @backupDeviceName + ' WITH DIFFERENTIAL, NOINIT , NOUNLOAD, NAME = ' + @backupJobName + ', SKIP , STATS = 10, NOFORMAT'
END
WHEN 3 THEN Select @tmpStr =
CASE @initFlag
WHEN 1 THEN 'BACKUP Log ' + @databaseName + 'TO '+ @backupDeviceName + ' WITH INIT, NOUNLOAD, NAME = ' + @backupJobName + ', SKIP , STATS = 10, NOFORMAT'
ELSE 'BACKUP LOG ' + @databaseName + 'TO '+ @backupDeviceName + ' WITH NOINIT, NOUNLOAD, NAME = ' + @backupJobName + ', SKIP , STATS = 10, NOFORMAT'
END
ELSE ''
END
TIA,
Romy Stevensen
I need help nesting select statements. Here's what I'm trying to do:
select (select e.emp_name_lf as employee, e.emp_id
from employee e, install_payroll_detail ipd
where e.emp_id = ipd.emplno)
e.emp_name_lf as username
from employee e, install_payroll_master ipm
where e.emp_id = ipm.entered_by
I just want one row with both the employee and username, however I cannot get the syntax. Any help is greatly appreciated.
Thanks!
Hi i am having some trouble with a nested case statement, what i want to do is set the value of a new column called Result depending on a series of case statements. Basically i want to check Test.Webstatus = 'Rd' and FinalResult = 'true' if this is true i want it to set the value in the Results field to ReportableResult + '~' + ReportableUnitDisplay then go through all the limits fields adding either the value of the field or 'blank' onto the end of the value in the Results field, depending on if the limits field has Null or a value in it. Producing a value in the Results field similiar to: 10~kg:10:5:2:1 or 10~kg:blank:5:blank:1 etc
select ClientRef, Sample.WebStatus as SampleStatus, Analysis, FinalResult, Test.WebStatus,
'Result' = Case
when Test.WebStatus = 'Rd' and FinalResult = 'true' then
Case
Case
when UpperCriticalLimit is null then ReportableResult + '~' + ReportableUnitDisplay + ':blank'
else ReportableResult + '~' + ReportableUnitDisplay + ':' + UpperCriticalLimit
end
Case
when UpperWarningLimit is null then ReportableResult + '~' + ReportableUnitDisplay + ':blank'
else ReportableResult + '~' + ReportableUnitDisplay + ':' + UpperWarningLimit
end
Case
when LowerWarningLimit is null then ReportableResult + '~' + ReportableUnitDisplay + ':blank'
else ReportableResult + '~' + ReportableUnitDisplay + ':' + UpperWarningLimit
end
Case
when LowerCriticalLimit is null then ReportableResult + '~' + ReportableUnitDisplay + ':blank'
else ReportableResult + '~' + ReportableUnitDisplay + ':' + LowerCriticalLimit
end
end
when FinalResult = 'false' then Null
else Test.WebStatus
from Job
inner join sample on Job.JobID = Sample.JobID
inner join Test on Sample.SampleID = Test.SampleID
left join Result on Test.TestID = Result.TestID
Any Advice Would Be Great
Thanks
David
Is it possible to use nested case statements in the SQL for your dataset when you are using Reporting Services? I keep getting an error saying "Unable to parse expression" and my report won't run.
Code SnippetCASE WHEN (CASE WHEN DateDiff(d , GetDate() , DATEADD(d , - 1 , DATEADD(m , 1 , DATEADD(m , 1 , DATEADD(d , - (1 * (DAY(TRANSACTION_DATE) - 1)) , TRANSACTION_DATE))))) < '0 THEN 'Overdue' WHEN DateDiff(d , GetDate(), DATEADD(m , FIELD1 / 30 - 1 , DATEADD(m , 1 , DATEADD(d , - (1 * (DAY(TRANSACTION_DATE) - 1)) , TRANSACTION_DATE)))) > 0 THEN 'Not Due' ELSE 'Due' END)= 'Not Due' AND FIELD2 > 0 THEN DateDiff(m , GetDate() , DATEADD(m , FIELD1 / 30 - 1 , DATEADD(m , 1 , DATEADD(d , - (1 * (DAY(TRANSACTION_DATE) - 1)) , TRANSACTION_DATE))) * 30) / 360 * FIELD2 * @PARAMETER1 ELSE NULL END
I know this is quite a complex statement, so at first I was worried that maybe I had brackets in the wrong places, but I've been through the code and made sure that every opening bracket has an equivalent closing bracket, and everything appears to be OK in that respect. So I'm thinking that maybe the structure of my nested case statements is incorrect? The inner case statement is necessary to calculate whether a transaction is due, overdue or not due. The outer case statement depends on the result of the inner case statement.
Basically, we only want the calculations following the "THEN" in the outer case statement to be executed if the result of the inner case statement is "not due" and Field2 is greater than zero. If either of those criteria aren't met, then it should go straight to the ELSE NULL END statement and stop.
All-
Is there a way that I can embedd a call to a stored procedure into an existing INSERT section in a table adapter?
Say my objective is to call a stored procedure called personfill automatically RIGHT AFTER the TableAdapter inserts a row into the person table. One catch is that the stored procedure must be sent the value of unique identifier field person_id, which was created for the new person record automatically by the db. (If this is not possible to do, I might try using a TRIGGER in the person table.)
Below is the INSERT code of the TableAdapter. My guess is that if I could call a procedure, I would want to put the call between lines 12 and 13.
Your comments would be most appreciated!!!
-Kurt1 <InsertCommand>
2 <DbCommand CommandType="Text" ModifiedByUser="false">
3 <CommandText>INSERT INTO [person] ([family_id], [circle_id], [person_type_id], [last], [first], [username], [password]) VALUES (@family_id, @circle_id, @person_type_id, @last, @first, @username, @password)</CommandText>
4 <Parameters>
5 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@family_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="family_id" SourceColumnNullMapping="false" SourceVersion="Current" />
6 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@circle_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="circle_id" SourceColumnNullMapping="false" SourceVersion="Current" />
7 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="Int16" Direction="Input" ParameterName="@person_type_id" Precision="0" ProviderType="SmallInt" Scale="0" Size="0" SourceColumn="person_type_id" SourceColumnNullMapping="false" SourceVersion="Current" />
8 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@last" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="last" SourceColumnNullMapping="false" SourceVersion="Current" />
9 <Parameter AllowDbNull="false" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@first" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="first" SourceColumnNullMapping="false" SourceVersion="Current" />
10 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@username" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="username" SourceColumnNullMapping="false" SourceVersion="Current" />
11 <Parameter AllowDbNull="true" AutogeneratedName="" DataSourceName="" DbType="AnsiString" Direction="Input" ParameterName="@password" Precision="0" ProviderType="VarChar" Scale="0" Size="0" SourceColumn="password" SourceColumnNullMapping="false" SourceVersion="Current" />
12 </Parameters>
13 </DbCommand>
14 </InsertCommand>
15 <SelectCommand>
16 <DbCommand CommandType="Text" ModifiedByUser="true">
17
I need to pass 3 column values and one Formula string into 4 replace statements and output the result in one column.
Nesting them in the usual way doesn't seem to work as that only allows for one column.
My table consits of four columns...PF (numeric), Hours (numeric), TotalNumber INT, and Formula (nvatchar)
My function needs to search and replace the Formula column for instances of all the three number columns and output the formula as a mathmatical formula rather than a string.
Here is what I have so far which works fine if all three columns have a value, but if only one is null then it will retrun NULL and not the other two values.
FUNCTION GetFormula
(@numPF NUMERIC(10,2), @numHours NUMERIC(10,2), @intTotalNumber INT, @strFormula nvarChar(200)) RETURNS nvarchar(200)
AS
BEGIN
DECLARE @strExpression nvarchar(200)
SELECT @strExpression=REPLACE(@strFormula, 'TotalNumber',@intTotalNumber)
SELECT @strExpression=REPLACE(@strExpression, 'PF',@numPF )
SELECT @strExpression=REPLACE(@strExpression, 'Hours',@numHours )
RETURN @strExpression
END
Many Thanks
I'm just wodnering if you have two select statements, one nested inside another, can you reference tables from the outer loop?
for example, say I would like to find all employees who have at least two clients and employees and clients have a one to many relationship.
select *
from Employee e
where
(
select count(*)
from Clients c
where c.EmployeeId = e.EmployeeId
) >= 2
This obviously doesn't work - but how would i go about doing something like this?
I have nested a Stored Procedure within a stored procedure. The nested stored procedure ends in a select statement. What I'd like to do is either capture the results of the select statement (it will be 1 row with 3 columns, I only need the contents of first column), or suppress the select statement from displaying in the final results of the Stored Procedure it is nested in.
Is there any way to do either of those?
So I have another query I can't seem to function the way I was hoping. I've learned a lot in this past month or so but I've hit another challenge. Anyways what I'm trying to do is when a user/student wants to add a new major I want to show a list of majors that are NOT already in his/her profile. So basically if I had a full list of majors:
Accounting
Computer Science
Mathematics
and the user already had Mathematics in his/her profile I'd like it to display only:
Accounting
Mathematics
Below is the layout of the tables, my attempt at the query, and then below that some example data.
Code Snippet
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF]
GO
/****** Object: Table [dbo].[Majors] Script Date: 04/17/2008 22:38:06 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Majors](
[MajorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
CONSTRAINT [PK_Majors] PRIMARY KEY CLUSTERED
(
[MajorID] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF]
GO
/****** Object: Table [dbo].[MajorDisciplines] Script Date: 04/17/2008 22:38:16 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[MajorDisciplines](
[MajorDisciplineID] [int] IDENTITY(0,1) NOT NULL,
[DegreeID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[MajorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[DisciplineName] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Description] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Criteria] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_MajorDiscipline] PRIMARY KEY CLUSTERED
(
[MajorDisciplineID] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_DegreeID] FOREIGN KEY([DegreeID])
REFERENCES [dbo].[Degree] ([DegreeID])
GO
ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_DegreeID]
GO
ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_MajorID] FOREIGN KEY([MajorID])
REFERENCES [dbo].[Majors] ([MajorID])
GO
ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_MajorID]
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF]
GO
/****** Object: Table [dbo].[MajorDisciplines] Script Date: 04/17/2008 22:38:16 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[MajorDisciplines](
[MajorDisciplineID] [int] IDENTITY(0,1) NOT NULL,
[DegreeID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[MajorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[DisciplineName] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Description] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[Criteria] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_MajorDiscipline] PRIMARY KEY CLUSTERED
(
[MajorDisciplineID] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_DegreeID] FOREIGN KEY([DegreeID])
REFERENCES [dbo].[Degree] ([DegreeID])
GO
ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_DegreeID]
GO
ALTER TABLE [dbo].[MajorDisciplines] WITH CHECK ADD CONSTRAINT [FK_MajorDiscipline_MajorID] FOREIGN KEY([MajorID])
REFERENCES [dbo].[Majors] ([MajorID])
GO
ALTER TABLE [dbo].[MajorDisciplines] CHECK CONSTRAINT [FK_MajorDiscipline_MajorID]
SELECT MajorID
FROM Majors majs
WHERE majs.MajorID NOT IN (SELECT majDis.MajorID FROM MajorDisciplines majDis WHERE majDis.MajorDisciplineID NOT IN (SELECT sMajors.MajorDisciplineID FROM Student_Majors sMajors WHERE sMajors.StudentID = 0))
dbo.Majors
MajorID
Accounting
Computer Science
Mathematics
dbo.MajorDisciplines
MajorDisciplinesID ... MajorID ...
1 Computer Science
2 Accounting
3 Accounting
4 Mathematics
dbo.Student_Majors
MajorDisciplineID StudentID
1 0
Oh also for the MajorIDs I don't want it to return duplicates such as the Accounting in MajorDisciplines...which I was hoping my query wouldn't do but it returns absolutely random data...
Hope someone can help!
Hello. I'm trying to reduce some code in my stored procedure and I'm running into lots of errors. I'm somewhat of a novice with SQL and stored procedures so any help would be beneficial.
I have a SP that gets a page of user data and is also called when sorting by one of the columns (this data is placed in a repeater, btw). I quickly learned that I wasn't able to pass in string parameters the way I had hoped in order to handle the ORDER BY and direction (ASC/DESC) so I'm trying to work around this.
So far I've tried the following with many errors.WITH Users AS (
SELECT ROW_NUMBER() OVER (ORDER BY CASE WHEN @OrderBy='FirstName' AND @Direction='DESC' THEN (FirstName + ' DESC')
WHEN @OrderBy='FirstName' THEN FirstName
WHEN @OrderBy='LastName' AND @Direction='DESC' THEN (LastName + ' DESC')
WHEN @OrderBy='LastName' THEN LastName
END
) AS Row,
UserID, FirstName, LastName, EmailAddress, [Role], Active, LastLogin, DateModified, ModifiedBy, ModifiedByName
FROM
vRF_Users
)
SELECT UserID, FirstName, LastName, EmailAddress, [Role], Active, LastLogin, DateModified, ModifiedBy, ModifiedByName
FROM Users
WHERE Row BETWEEN @StartRowIndex AND @EndRowIndex
I've tried a combination of similar things with parenthesises, without, doing "THEN FirstName DESC" without concatenating anything, etc.
I also tried: DECLARE @OrderByDirection varchar(32)
DECLARE @DESC varchar(4)
SET @DESC = ' DESC'
IF @Direction = 'DESC'
BEGIN
SET @OrderByDirection = (@OrderBy + @DESC)
END
And then writing my case statemet like this:ORDER BY CASE WHEN @Direction='DESC' THEN @OrderByDirection
ELSE @OrderBy
ENDObviously this didn't work either. Is there any way to gracefully accomplish this or do I just have to use a bunch of if/else statements and lots of redundant code to evaluate all my @OrderBy and @Direction parameters???
Thanks in advance,
Jen
Hello,I want to share my experiences about using insert into exec which mayhelp others .Using SQL Server 2000, SP3 .Two Proceduers - Parent SP caliing a Child SP (nested ) . No Explicittransactions .I have defined a # table in Parent SP and calling a Child SP like thisinsert into #temp exec childsp ......Child SP has Select * from local # temp table ( local to child SP) as the last statement .When number of records are less ( around 1000 - 5000) Parent SPexecutes but slow .When the Child SP returns higher number of rows ( 1,00,000 or more )the SP will be running for hours with out completion .Although executing the child SP , with exec ChildSP .... with sameparameters it is completed in 2 mins for 3,00,000 rows .Resolution : - Define a temp table (say #tempChild ) in the Parent SP..In the Child SP instead of select * replace with insert into#tempChild select * from ...Also note that this problem is not noticed in SQL 2000 Server with SP4..This may be due to SP executing in implicit transactions .
View 1 Replies View RelatedI try to select a store procedure in SqlExpress2005 which inside store procedure execute another store procedure,
When I select it but it prompt error messages "An INSERT EXEC statement cannot be nested.".
In Fire bird /Interbase store procedure we can nested. Below are the code;
declare @dtReturnData Table(doccode nvarchar(20), docdate datetime, debtoraccount nvarchar(20))
Insert Into @dtReturnData
Exec GetPickingList 'DO', 0, 37256, 'N', 'N', 'YES'
Select doccode, docdate, debtoraccount
From @dtReturnData
Inside the GetPickList It will do like this, but most of the code I not included;
ALTER PROCEDURE GETPICKINGLIST
@doctype nvarchar(2),
@datefrom datetime,
@dateto datetime,
@includegrn char(1),
@includesa char(1),
@includedata nvarchar(5)
AS
BEGIN
declare @dtReturnData Table(doccode nvarchar(20),
docdate datetime,
debtoraccount nvarchar(20))
IF (@DOCTYPE = 'SI')
BEGIN
Insert Into @dtSALESINVOICEREGISTER
Exec SALESINVOICEREGISTER @DateFrom, @DateTo, @IncludeGRN, @IncludeSA, @IncludeData
END
ELSE
BEGIN
Insert Into @dtDELIVERYORDERREGISTER
Exec DELIVERYORDERREGISTER @DateFrom, @DateTo, @IncludeGRN, @IncludeSA, @IncludeData
END
Select doccode,docdate,debtoraccount From @dtReturnData
END
So how can I select a nested store procedure? can someone help me
I am running the DMX below and I am getting an error we I go to train my structure. It is probably something stupid but I do not see the problem. It seems like the SKIP isn't being recognized but I am not sure. Here is the error:
INSERT INTO error: The '[MSA].[HospitalID]' nested table key column is not bound to an input rowset column.
DMX:
CREATE MINING STRUCTURE [Hospital_Structure] (
[HospitalID] LONG KEY,
[SponsorshipTypeID] LONG DISCRETE,
[GeographicTypeID] LONG DISCRETE,
[CaseMixIndex] DOUBLE CONTINUOUS,
[PercentGovtPayers] DOUBLE CONTINUOUS,
[TotalNumberInpatientCases] LONG CONTINUOUS,
[MSA] TABLE (
[HospitalID] LONG KEY,
[MSAGroupMember] TEXT DISCRETE
)
);
GO
ALTER MINING STRUCTURE [Hospital_Structure]
ADD MINING MODEL [Hospital_Model] (
[HospitalID],
[SponsorshipTypeID],
[GeographicTypeID],
[CaseMixIndex],
[PercentGovtPayers],
[TotalNumberInpatientCases],
[MSA] (
[HospitalID],
[MSAGroupMember]
)
) USING Microsoft_Clustering;
GO
INSERT INTO MINING STRUCTURE [Hospital_Structure]
(
[HospitalID],
[SponsorshipTypeID],
[GeographicTypeID],
[CaseMixIndex],
[PercentGovtPayers],
[TotalNumberInpatientCases],
[MSA] (SKIP, [MSAGroupMember])
)
SHAPE {
OPENQUERY([localhost],'
SELECT
[HospitalID],
[SponsorshipTypeID],
[GeographicTypeID],
[CaseMixIndex],
[PercentGovtPayers],
[TotalNumberInpatientCases]
FROM
[dm].[vw_HospitalClustering_Inputs]
ORDER BY
[HospitalID]') }
APPEND
(
{OPENQUERY([localhost],'
SELECT
[HospitalID],
[MSAGroupMember]
FROM
[dm].[vw_HospitalClustering_InputsNested]
ORDER BY
[HospitalID],
[MSAGroupMember]')
}
RELATE [HospitalID] TO [HospitalID]
) AS [MSA]
Thanks in advance
Hi All,
I am having a problem with nested insert exec. Say for example I have three stored procedure procA, procB and procC.
I am executing procedure procC in procB; I am storing the values returned by procC in a tempTable. The code is
INSERT INTO #Temp
EXEC procC
And in procA, I am executing procB, and the values returned by procB are stored in another temp table. The code is
INSERT INTO #TempOne
EXEC procC
When I execute the procA, I am getting error as
An INSERT EXEC statement cannot be nested.
My requirement is like this, please give me a solution.
Thanks
i have a 3 or 4 cursors, and in the inner cursor i am inserting into a table from a sproc. i keep getting the error
An INSERT EXEC statement cannot be nested.
heres the actual insert code:
set @SQLString = 'EXEC ScoresGetlines '+cast(@customerID as char(10))+',' + cast(@programId as char(10))+',' + '"'+ @period +'",NULL,NULL,0'
INSERT INTO reportData
exec (@sqlString)
ive tried just a simple :
insert into reportdata
exec scoreGetLines @customerId,@programID...........
that still doesnt work. same error. how can this be sorted
I am using the following statement in a SP.
EXECUTE (' INSERT INTO #OutPut
EXEC h_DailyDividend
@TickerTable = '+@TickerTableName+',
@DateTable = '+@DateTableName+',
@Units = '+@Units
)
AND IN h_DailyDividend I am using the following statement.
EXECUTE (' INSERT INTO #TickerTable
EXEC h_SecMstr_SecMap_TQAExch_Info
@IDList = '+@TickerTable+',
@IsTable = 1,
@Type = 0,
@OutPutFormat = 0,
@VenType = 14 ')
And i am getting the following error.
Message: An INSERT EXEC statement cannot be nested.
Can any body help me out how to solve this problem.
Regards
Sulaman
Hi guys! I have these commands that insert into two tables, if condition 1 is met, it will insert into the first table, if the second condition is met, it will insert into the second table.
Is there a way for the insert statements to be merged so that I won't be executing two statements?
Dim update_phase_before As New SqlCommand("INSERT INTO TE_shounin_todokesho_jizen (syain_No,date_kyou,time_kyou) SELECT syain_No,date_kyou,time_kyou FROM TE_todokesho WHERE TE_todokesho.b_a='before'", cnn)
Dim update_phase_after As New SqlCommand("INSERT INTO TE_shounin_todokesho_jigo (syain_No,date_kyou,time_kyou) SELECT syain_No,date_kyou,time_kyou FROM TE_todokesho WHERE TE_todokesho.b_a='after'", cnn)
Thanks.
i'm quite new with sql and i have an question about het insert statements.
Is the order of the insert statements from any importance?
and why is/isn't it?
Greetz
HI,
WELL WE HAVE BEEN TRYING TO AUTOMATE A PROCEDURE OUT HERE,AND WE ARE TRYING TO CONVERT MOST OF THE THINGS INTO PROCEDURES.
BUT WE ARE GETTING A FEW HICCUPS. PLS HELP
THIS IS HOW IT GOES :-
CREATE PROCEDURE MY_PROC1
AS
BEGIN
ST1 .........;
ST2..........;
END
CREATE PROCEDURE MY_PROC2
AS
BEGIN
CREATE TABLE #TMP2
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP2
EXEC MY_PROC1
ST1 .........;
ST2..........;
END
THIS PROCEDURE TOO RUNS WELL ,AFTER TAKING THE DATA FROM THE FIRST PROC IT MANIPUATES THE DATA ACCORDING TO THE CRITERIA SPECIFIED
NO PROBLEM TILL NOW.......
BUT,
CREATE PROCEDURE MY_PROC3
AS
BEGIN
CREATE TABLE #TMP3
(COL1 DATATYPE
COL2 DATATYPE)
INSERT INTO #TMP3
EXEC MY_PROC2
ST1 .........;
ST2..........;
END
THEN IT GIVES AN ERROR AS :-
"An INSERT EXEC statement cannot be nested."
CAN'T WE , FROM A PROCEDURE CALL A PROCEDURE WHICH CALLS A PROCEDURE........
WHAT IS THE NESTING LEVEL OF A PROCEDURE ?
IS THERE ANY WAY AROUND IT OR CAN IT BE DONE BY CHANGING SOME SETTINGS ?
PLS HELP ME OUT IN THIS
THANKS
Hi,all,When I use following sql, an error occurs:insert into #tmprepEXECUTE proc_stat @start,@endThere is a "select * from #tmp " in stored procedure proc_stat, and theerror message is :Server: Msg 8164, Level 16, State 1, Procedure proc_stat, Line 42An INSERT EXEC statement cannot be nested.What's the metter? Any help is greatly appreciated. Thanks
View 2 Replies View Relatedhey there, i'm trying to move one record from one table to the next,so i'm doing this by doing an insert into table, then delete from theprevious table. Only thin g is on the insert i want to include aparameter. Can't work how to do this. Do you think i need to doanother update query and insert the parameter that way, after theinsert is done?ALTER PROCEDURE dbo.ReturnLoan(@strBarcode varchar(100),@strLibrary varchar(100),@dateReturned datetime)ASINSERT INTO Loan_History(Barcode,UserID,Date_Borrowed,Library)Select Barcode, UserID, Date_Borrowed, Library FROM Loans WHEREBarcode = @strBarcodeAND Library = @strLibrary;DELETE FROM LoansWHERE Barcode = @strBarcodeAND Library = @strLibrary ;RETURN
View 1 Replies View RelatedI need to write some insert statements, 1 per table, ~100 tables, all having the approximante form:
Select Into TableA Select * From TableB
Except that I need explicit statements:
Select Into TableA Col1, Col2, Col3, ... ColN Values ...
The reason is that I need to preserve the current identity values (it's a replication setup scenario). I can set Identity_Insert On, but then it wants the explicit column names and values.
Is there a wizard or utility that will generate the statements for me? With
100 tables in the db, I'm not looking forward to writing it all :-)
TIA,
Arthur
PS. Given that it's Easter weekend, if you have an answer could you please e me directly? Thanks!
Hello,
I am creating my companys' database and I have a small problem that must be
solved.
I have a pictures table:
PicturesTable
-------------
ProductID int ForeignKey
Picture nvarchar(30)
...
(A product can have many pictures & the ProductID is unique for any product,
but not for the table of pictures).
What I want to do is to somehow do a procedure to:
1) Check if any images (for a productID) exists in the table
2) if they do not exist then add the appropriate images into the table
3) if the images exist, then update the images with the new one that I have.
What I thought was to just delete all the images from the table for the
specific product:
DELETE FROM PicturesTable
WHERE ProductID = '10-11'
and then add the appropriate images:
INSERT INTO PicturesTable (ProductID, Picture)
VALUES ('10-11', 'Dir1/Pic1.gif')
INSERT INTO PicturesTable (ProductID, Picture)
VALUES ('10-11', 'Dir1/Pic2.gif')
INSERT INTO PicturesTable (ProductID, Picture)
VALUES ('10-11', 'Dir1/Pic3.gif')
but I do not like a lot this idea because if a user tries to read the pictures
for that product (at the same time I was deleting them) s/he would get
nothing. Is any other way that I can do it please?
I would appreciate it if someone answers me.
Yours, sincerely
Efthymios Kalyviotis
ekalyviotis@comerclub.gr
Hi Friends,
I have the following set of Insert Statements that calculates sums for various criteria and inserts a row at a time onto my table.
I have a row for every month starting from January with sums for 4 severity levels. So for 12 months that would be 48 Insert Statements and if I want to do this for 4 different types of [EName] that would be 48 * 4 = 192 Insert Statements. Is there a better way to write this. Thanks for your help
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 1 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 1)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 2 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 2)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 3 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 3)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '1/1/06') AS TrendMonth, 4 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'January' and [Severity Level] = 4)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 1 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 1)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 2 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 2)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 3 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 3)
INSERT INTO dbo.tbl_Ticket ([EName], TrendMonth, [Severity Level], [Count])
SELECT 'OVERALL' AS [EName], DATENAME(MONTH, '2/1/06') AS TrendMonth, 4 , Sum([Count])
FROM dbo.tbl_Ticket
WHERE (TrendMonth LIKE 'February' and [Severity Level] = 4)
Hey guys...
I just made a little proc to generate inserts for a given table. Sadly, it contains two cursors... :(
Can any of you guys come up with a way without cursors?
Here's the proc:
create proc generate_inserts @table varchar(20)
--Generate inserts for table @table
AS
declare @cols varchar(1000)
declare @col varchar(50)
set @cols=''
declare colcur
cursor for
select column_name
from information_schema.columns
where table_name=@table
open colcur
fetch next from colcur into @col
while @@fetch_status=0
begin
select @cols = @cols + ', ' + @col
fetch next from colcur into @col
end
close colcur
deallocate colcur
select @cols = substring(@cols, 3, datalength(@cols))
--select @cols
declare @sql varchar(4000)
declare @colname varchar(100),
@coltype varchar(30)
select @sql = 'select replace(''insert ' + @table + ' (' + @cols + ') '
select @sql = @sql + 'values ('''
declare ccur
cursor for
select column_name, data_type
from information_schema.columns
where table_name=@table
open ccur
fetch from ccur into @colname, @coltype
while @@fetch_status=0
begin
if @coltype in ('varchar', 'char', 'datetime')
select @sql=@sql + ''''''
select @sql=@sql + ' + coalesce(convert(varchar, ' + @colname + '), ''null'') + '
if @coltype in ('varchar', 'char', 'datetime')
select @sql=@sql + ''''''
select @sql = @sql + ''', '''
fetch from ccur into @colname, @coltype
end
close ccur
deallocate ccur
select @sql=substring(@sql, 1, datalength(@sql)-3)
select @sql=@sql + ')'', ''''''null'''''', ''null'') from ' + @table
exec (@sql)
Hello,
I would like to get opinions about the code below and what I can do to improve it. I don't know if I am using the best techniques in this code. I am not running into any problems, but I am assuming there has to be cleaner ways of doing this.
Also I am trying to figure out why the INSERT INTO statement in the query is giving me the error:
"The column prefix '#ttsku' does not match with a table name or alias name used in the query."
The purpose of the code is to select all the item records from a linked server (Non MS SQL) and bring it into a temp table. I did this because I can't create a cursor to the other DB.
Using this temp table, look if the SKU table has the item in it, if it does then update the record, otherwise I need to create the record and fill in the values from the temp table.
Finally I need to delete any records that don't exist in the temp table.
Here is the code:
SELECT
pt_mstr.pt_part as part,
pt_mstr.pt_desc1 as desc1,
dbo.udf_GetEntry(cd_det.cd_cmmt,1,';') as custdesc,
dbo.udf_GetEntry(cd_det.cd_cmmt,2,';') as caformat,
dbo.udf_GetEntry(cd_det.cd_cmmt,3,';') as plformat,
dbo.udf_GetEntry(cd_det.cd_cmmt,6,';') as eaformat,
(pt_mstr.pt__qad24 * pt_mstr.pt__qad25) as pallqty,
case
when um_mstr.um_conv is not null then
round((pt_net_wt / (cast(pt_drwg_loc as numeric) /um_conv)),0)
else
round((pt_net_wt / cast(pt_drwg_loc as numeric)),0)
end as packqty,
pt_mstr.pt_drwg_loc as packsize,
pt_mstr.pt_drwg_size as packum,
dbo.udf_GetEntry(cd_det.cd_cmmt,4,';') as dist1,
dbo.udf_GetEntry(cd_det.cd_cmmt,5,';') as dist2,
pt_mstr.pt_user2 as brand,
pt_mstr.pt__qad24 as ti,
pt_mstr.pt__qad25 as hi,
pt_mstr.pt_status as status
INTO #ttsku
FROM mfgprod..pub.pt_mstr pt_mstr
left join mfgprod..pub.cd_det cd_det on
(cd_det.cd_ref = pt_mstr.pt_part
and cd_det.cd_type = 'MK'
and cd_det.cd_lang = 'US'
and cd_det.cd_seq = 0)
left join mfgprod..pub.um_mstr um_mstr on
(um_mstr.um_um = pt_mstr.pt_net_wt_um
and um_mstr.um_alt_um = pt_drwg_size
and um_mstr.um_part = '')
WHERE pt_part_type = 'FG'
and (pt_status = 'A' or pt_status = 'AMTO')
and (pt_drwg_loc <> '' and pt_drwg_loc <> '0')
declare c_part cursor for
select *
from #ttsku
open c_part
fetch next from c_part
while @@fetch_status = 0
begin
if exists (select *
from sku
where sku.part = #ttsku.part)
BEGIN
update sku
set sku.Desc1 = #ttsku.desc1,
sku.CustDesc = ##ttsku.custdesc
where sku.part = #ttsku.part
END
ELSE BEGIN
insert into sku (sku.part, sku.desc1)
select #ttsku.part, #ttsku.desc1
END
fetch next from c_part
END -- while
close c_part
deallocate c_part
DELETE FROM sku
WHERE not exists (select *
from #ttsku
where #ttsku.part = sku.part)
drop table #ttsku
Thanks again for any help.
Scott
Hello all. Got bit of a long winded question here...........so here we go lol.
OK.......ive got data on an Excel spreadsheet. Ive set the spreadsheet up as a linked server and i'm creating a set of insert statements from it by using the following code:
SELECT 'INSERT INTO TRAINREC (COURSE_NAME) VALUES ('''+
EMPLOY_REF + ''', '''+
FROM AtriumDD...['Employee Training Records$']
For most records this generates a correct insert statement.........for example:
INSERT INTO TRAINREC (EMPLOY_REF, COURSE_NAME) VALUES ('153', 'NMA Panel');
However.........my problems start when the value for course name is containes an ' character. If it does the insert statement generated is incorrect. For example:
INSERT INTO TRAINREC (EMPLOY_REF, COURSE_NAME) VALUES ('139', 'Annual Accounting in Lloyd's Market');
can anyone suggest any ideas on how to get round this? Also if i havent explained it clearly enough just let me know and i can try and expand on it.
Thanks for reading.
Hi,
I'm using version 3.5.5386.0 of SqlServerCompact Edition for windows mobile.
My first tests indicates that an insert statement with '?' ist 20 % faster than with '@p1' parameters:
"INSERT INTO Itest(PKey,value1,value2,value3,Date1) VALUES (?,?,?,?,?)"
"INSERT INTO Itest(PKey,value1,value2,value3,Date1) VALUES (@P1,@2,@3,@P4,@P5)"
I've no explanation for that. I reported some problems with the '?' parameters in my other task http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2715685&SiteID=1
So I'm a little bit afraid to use this version.
Is there a recommandation which version to use for Inserts?
Thanks,
Stefan
Hi,
I want to prepare insert statements for the data of all tables in my database.
I want this to create seed data. Just by using those scripts i can insert the data in another db.
Please suggest ho wto prepare in easy way.
Thanks in advance.
Is it possible to export data from tables to SQL insert statements? Got SQL 2005 developer, visual studio 2005, and Visio enterprise architect, if that makes any difference. I already found this tool but it costs money.
View 1 Replies View Related