Net Send Failure
Jul 23, 2005
On a Windows 2000 Server in MYDomain I can do the following
successfully:
Net Send JoeUser "test"
However on a Windows Server 2003 (Standard Edition) in MyDomain I get:
An error occurred while sending a message to JoeUser.
The message alias could not be found on the network.
More help is available by typing NET HELPMSG 2273.
If I enter: net send /DOMAIN:MyDomain joeuser "test"
net send comes back with:
The message was successfully sent to domain MyDomain
BUT... no popups are received.
Is there something common to a Windows Server 2003 server that I need
to configure to get this to work?
How does this relate to SQL Server 2000? I figure that if I can get it
to work via a command prompt that it will work for notification as well
-- which at this point it doesn't.
Thanks for any help.
RBollinger
View 2 Replies
ADVERTISEMENT
Aug 7, 2006
Hello,
I'm working on SSIS Package, I messing with one problem. I have a sequence container as a parent & it has 4 data flow task. In that data flow task data is ETL in another database server. According to my requirement, if any of the task is failed then i have to send a mail to the concern person describe the cause of failure. Currently i'm doing this by event handler onerror condition. but for one error it sending 4 mail. becuase for one error it's giving 4 error message. i had used another alternative, on failure of task i connect it to another task that sending mail. but it works only when i use logical OR. But i'm not getting whether it's a correct method or not.
Please help me. Soon.
Thanks in advance.
View 3 Replies
View Related
Apr 26, 2007
Hi,
I tried to set up the send Mail Task and got the following message, however can't receive any message:
SSIS package "Package.dtsx" starting.
Error: 0xC002F304 at Send Mail Task, Send Mail Task: An error occurred with the following error message: "Failure sending mail.".
Task failed: Send Mail Task
SSIS package "Package.dtsx" finished: Success.
The program '[3628] Package.dtsx: DTS' has exited with code 0 (0x0).
Can somebody tell me why?
Thanks,
View 1 Replies
View Related
Sep 25, 2007
Hi,
The send mail task in ssis was failing with following error
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
The firewall for SMTP server was opened.
And successful in sending mail using Database Mail task from the sql server
Do any one have idea why this difference is? Do any one ever faced similar issue?
One reason I could found is McAfee virus scan policy is stopping the SSIS Send mail task.
(source: 9/25/2007 9:00:04 AM Blocked by port blocking rule C:Program FilesMicrosoft SQL Server90DTSinnDtsDebugHost.exe Anti-virus Standard Protection : Prevent mass mailing worms from sending mail 10.237.5.105:25)
Thanks
View 12 Replies
View Related
Mar 23, 2008
i have a package that contains a foreach loop container, in this container i have sql tasks, and execute package tasks, that end with a send mail task. if there something wrong with the smtp server, or it's down, the send mail task fails the package.
i don't want this to happen, what i want that if the send mail taks fails, the package will continue it's execution.
--i thought of using the event handler... but i don't know if it works...
thank you for any help!!!
View 5 Replies
View Related
Mar 12, 2007
Hi ALL
I am facing a strange problem using ADO to connect Sql Server that I can not resolve it.
My program connected to SqlServer when it started, the state of the connectionPtr was adoStateOpen.Then I disable the network card and enable it immeditately, the errors happened when I executed the sql query probably because of connectionPtr was invalid,but the state of connectionPtr was always adoStateOpen.
1)Msg: Unspecified error Source: Microsoft OLE DB Provider for ODBC Drivers Description: [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (send()).
2)Msg: Unspecified error Source: Microsoft OLE DB Provider for ODBC Drivers Description: [Microsoft][ODBC SQL Server Driver]Communication link failure.
Should I reconnect to SqlServer?How can I catch this error when the connection is valid except other errors?
Sorry,my english is poor and thanks for your response.
Thanks a lot.
Env:
1)OS : Windows 2000 Server
2)SqlServer:Sql Server 2000
View 1 Replies
View Related
Mar 26, 2015
I have multiple task flows with precedence constraints and i have changed the constraint as completion to execute the package even though there is failure in one of the tasks in the package but every time the send mail success is executed instead of Send mail Failure task.
View 0 Replies
View Related
Jun 10, 2015
I have configured smtp email in MS sql server and configure email to schedular job when schedular jobs become failed. Can i configure email so that email will be sent from scheduler job on both success of job and Failure of job?
View 3 Replies
View Related
Jul 29, 2015
Send Mail task not working properly when it configured in Precedence Constraint (Failure)...
Scenario:
I'm using multiple containers in my ssis package. Also I have configured mail task for capturing error.
I'm getting mail only when error occurs in foreach loop container. If error occurs in other containers it doesn't works.
Actually I would like to receive mail notification on error when it occurs in any of the containers or DFT.
View 9 Replies
View Related
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
Aug 15, 2006
Hi,
I have a string almost 11006 length.. when i try to send back from SQLCLR procedure
it says cannot send ..
here is Exception Text "Message length 11060 exceeds maximum length supported of 4000."
Max limit to send a string using pipe is 4000
How I can send a string which is large in size than 4000.
Thanks
View 6 Replies
View Related
Jan 19, 2007
Hello All,
Hopefully someone out there will have an idea as this is driving me nuts.
I want to send a dynamic files in attachment files ny send mail task that file name has change follow datetime.
I try to use the expression but I can't use it.
please tell me for this problem.
Any suggestions appreciated,
Thanks.
View 4 Replies
View Related
Apr 18, 2012
I have a job that emails out shipment notifications at the end of the day to our customers. The problem I have is I don't understand why the same email is sending out twice within a minute of each other when the job is only scheduled to run once. If I take the code out of the step and run it in management studio it only emails once. I attached the code for one customer for reference. We are running SQL 2008 on a VM sending to an exchange 2010 server.
DECLARE @tableHTML NVARCHAR(MAX) ;
SET @tableHTML =N'<H1>XYZ Company ASN For ' + CONVERT(VARCHAR(10), GETDATE(), 101) + ' </H1>' +
N'<table border="1">' +
N'<tr><th>Vendor</th><th>Delivery Date</th>' +
N'<th>Purchase Order Number</th><th>Item Number</th><th>Item Description</th>' +
N'<th>Quantity Shipped</th><th>UOM</th><th>BOL Number</th>'
[code]....
View 9 Replies
View Related
Nov 17, 2007
Hi all,
I am using ODBC to connect SQL Server 2000 + SP4 server runnig on Windows 2003 standard edition Server +SP1. But, sporadically my application server connectivity to DB fails and i receive the following error messages
[Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionWrite (WrapperWrite()).
[Microsoft][ODBC SQL Server Driver][DBNETLIB]General network error. Check your network documentation.) In D:de.cpp 702 Apr 12 2006 20:34:47
[Microsoft][ODBC SQL Server Driver]Communication link failure) In D:de.cpp 702 Apr 12 2006 20:34:47
20071017 08:23:10 TID (00000ff0) Sev (3) Err (0) Msg (Read failure.
General SQL error.
Strange thing is that i receive this error only sporadically, Please Please advice !
Thanks ,
Jitender
View 1 Replies
View Related
Jul 14, 2015
Is there anyway to send excel file from ssis using send mail task without saving the excel file locally. I need to automate the process which involves loading the excel file from the database and send it to some people.
View 6 Replies
View Related
Nov 28, 2007
I have attempted to report out errors at the end of an ETL process by alerting supporting DBAs of errors using the SSIS "Send Mail Task". Task completes along with the sequenced packages, but does not mail anything out. No logic at this time for trigger, just success from the previous task triggering the task to send mail. I also get no errors in the output, and I get no output indicating the send mail task fired, but it does go "green". Do I have to enable database mail and have privileges?
Component Configuration:
SMTP Connection Manager - SMTP Server: arsocex02
Send Mail Editor -
From: messerj@arsocdev.bdev.lab.mil
To: sanderss@arsocdev.bdev.lab.mil
MessageSourceType: Direct Input
Expression: MessageSource = "Package>>> " + @[System:ackageName] +" was executed at>>> " + (DT_WSTR, 40) @[System:tartTime] + " by user>>> " + @[System::UserName] + " on Machine>>> " + @[System::MachineName] + " Errors reported to ERRORS_COURSE_CLASS_STATUS_T: " + (DT_WSTR, 50) @[User::ErrorCourseClassStatus]
Thanks
View 7 Replies
View Related
Feb 27, 2007
Hello All,
Hopefully someone out there will have an idea as this isdriving me nuts
I have some sample problem.I want to send many email in one send mail task, how can i do it?
what is a signal for separate between email address in send mail task.
please tell me for this event.
any suggesstion appreciated
Thanks you very much.
P.Chonnathan
View 5 Replies
View Related
May 30, 2001
Is there a way to send a message to all people connected to the sql server at the same time or does this have to be done individually?
Thanks in Advance
Troy
View 2 Replies
View Related
Nov 1, 2001
Is there a way to get two or more users to recieve net send messages? Currently we have one user that is receiving the messages and we need another admin to receive them as well.
Thank you in advance,
Anita
View 1 Replies
View Related
Sep 11, 2006
Hi all, can i send an email through SQL? i don't want to use third party software. Also, i can't configure the customer's db server. It is possible to send an email without much configuration. If configuration needed, is it possible to configure through SQL script? thx
View 8 Replies
View Related
Aug 26, 2002
Is there a way to send a net send notification to more than one user? I can send to one successfully. Thanks.
View 1 Replies
View Related
Sep 24, 2001
<CODE>
<FONT face="Verdana, Arial, Helvetica" color=midnightblue size=2>For some reason
this proc doesn't send attachment. Please advise.
<P></P>
<P><PRE id=code><FONT id=code face=courier size=2></pre>
<P></P><P>CREATE PROCEDURE [dbo].[sp_SendCDONTSMail]<BR>@Help [BIT] = 0,<BR>@From [VARCHAR](8000) = NULL,<BR>@To [VARCHAR](8000) = NULL,<BR>@Cc [VARCHAR](8000) = NULL,<BR>@Bcc [VARCHAR](8000) = NULL,<BR>@Subject [VARCHAR](8000) = NULL,<BR>@Body [VARCHAR](8000) = NULL,<BR> @Filename [VARCHAR](8000) = NULL,<BR> @Importance int = 0,<BR>@MailFormat [BIT] = 0,<BR>@BodyFormat [BIT] = 0<BR>AS<BR>DECLARE<BR>@Error [VARCHAR](150),<BR>@object [INT],<BR>@hr [INT]</P><P>IF @Help = 1<BR>BEGIN<BR>PRINT '<BR>Purpose:<BR>This porcedure will send an email using CDONTS.dll.<BR>Use as a replacement to xp_sendmail. It will allow you<BR>to send HTML emails from SQL<BR>'<BR>RETURN 1<BR>END</P><P>IF ((@From IS NULL OR @From = '') OR (@To IS NULL OR @To = '') OR (@Subject IS NULL OR @Subject = '') OR (@Body IS NULL OR @Body = '')) AND @Help = 0<BR>BEGIN<BR>SET @Error = 'sp_SendCDONTSMail requires parameters @From, @To, @Subject, and @Body.' + CHAR(13) + 'Please execute ''sp_SendCDONTSMail 1'' for syntax assistance.'<BR>RAISERROR(@Error, 16, 1)<BR>RETURN -1<BR>END</P><P>EXEC @hr = sp_OACreate 'CDONTS.NewMail', @object OUT<BR>EXEC @hr = sp_OASetProperty @object, 'From', @From<BR>EXEC @hr = sp_OASetProperty @object, 'To', @To<BR>EXEC @hr = sp_OASetProperty @object, 'CC', @Cc<BR>EXEC @hr = sp_OASetProperty @object, 'Bcc', @Bcc<BR>EXEC @hr = sp_OASetProperty @object, 'Subject', @Subject<BR>EXEC @hr = sp_OASetProperty @object, 'Body', @Body<BR>EXEC @hr = sp_OASetProperty @object, 'MailFormat', @MailFormat<BR>EXEC @hr = sp_OASetProperty @object, 'BodyFormat', @BodyFormat<BR>exec @hr = sp_OASetProperty @object, 'Importance', @Importance<BR>EXEC @hr = sp_OAMethod @object, 'AttachFile', @FileName <BR>EXEC @hr = sp_OAMethod @object, 'Send'<BR>EXEC @hr = sp_OADestroy @object</P></FONT></FONT>
</CODE>
View 1 Replies
View Related
Nov 9, 2000
Hi,
I know that is possible to programmatically send an e-mail with the command xp_sendmail, but i want to know if it's possible to programmatically send a Net Send message.
Martin
View 1 Replies
View Related
Jan 24, 2005
Hi,
I have a datetime field in sql database in which dates are stored in format 'mm/dd/yyyy'.
What i want is to send them BD greetings checking with the current date.
How can i acheive this in query ?
Thanks in advance.
View 4 Replies
View Related
Jul 24, 2006
I have a requirement to select top 15 from a table
select top 15 from students
============================
now , i want to send first 5 to Class A , Next 5 to Class B , Next 5 to Class C
how can i
select top 5 to 10 from top 15 from table students
==========================================
select top 10 to 15 from top 15 from table students
==========================================
View 4 Replies
View Related
Mar 27, 2008
Hi,
I need to select a table from my database and send the table as an email message to a person every 10am because the table changes every day. How to it?
View 2 Replies
View Related
Jul 23, 2005
I'm a newby and I have a quick question. I have set up this procedureto run as a job. I can create a block and have it populate the table,but I need to be alerted via email when the table is being populated. Ido not know what step/s am I missing. Here is the scripts I ran:CREATE TABLE BlockMonitorInfo(spid smallint,blocked smallint,waittype binary,InfoTime datetime)go/*********creates a control table that lets you turn the backgroundprocess on and off**********/CREATE TABLE BlockMonitorControl(BlockMonitorOn tinyint)go/**********populates the control table and initially turns on thebackground process******/INSERT INTO BlockMonitorControlVALUES (1)go/*StartBlockMonitor accepts one datetime paramter that controls thesampling delay for capturing blocking information*/drop PROC StartBlockMonitorgoCREATE PROC StartBlockMonitor@DelayTime char(9)ASDECLARE @CurrentInfoTime datetime-- Set the control flag in BlockMonitorControl = Onupdate BlockMonitorControl set BlockMonitorOn = 1-- Capture blocking lock info until the control flag is set = false-- We set it off by running StopBlockMonitor which we'll create soon.WHILE (SELECT BlockMonitorOn from BlockMonitorControl) = 1BEGINSELECT @CurrentInfoTime = getdate()INSERT INTO BlockMonitorInfo (spid, blocked, waittype, InfoTime )SELECTspid, blocked, waittype, @CurrentInfoTimeFROMmaster..sysprocesses (nolock)WHEREblocked <> 0WAITFOR delay @DelayTimeENDgo/*StopBlockMonitor turns off the capture of blocking info by setting thecontrol flag in BlockMonitorControl = off*/DROP PROC StopBlockMonitorgoCREATE PROC StopBlockMonitorASUPDATE BlockMonitorControl SET BlockMonitorOn = 0goSELECTBlockMonitorInfo.*FROMBlockMonitorInfo,(SELECT distinct InfoTime FROM BlockMonitorInfo)BlockChainTimeWHEREBlockMonitorInfo.InfoTime =BlockChainTime.InfoTimeand Blocked not in(SELECT spidFROM BlockMonitorInfoWHERE InfoTime =BlockChainTime.InfoTime)This last query is what I have set up in a job, but I need the job toalert us when the table gets new information added.Thank you for the assistance!
View 1 Replies
View Related
Jul 20, 2005
xp_sendmail has died on our SQL Server, I get error "xp_sendmail:failed with mail error 0x80004005" if I try using it.I believe that the reason that this has happened is because the SQLServer service account is unable to send mail, as follows:If I log on to Outlook Web Access as the SQL Server service account(SVC_SqlServer) I am able to receive mail. However, any mail sent fromthis account simply dissapears.It appears in the Sent items folder (in OWA for the SVC_SqlServeraccount) but the recipient (me, in this case) never receives it!Does anyone know why this account is unable to send mail?Help!eddiec :-)
View 1 Replies
View Related
Jan 3, 2007
Hi,
How can I Send Mail with the query result having multiple rows. What type of dataflow destination is correct (recordset, datareader). The Send Mail task is working correctly. But, the message is blank without any result set.
Appreciate your help.
Thanks
View 16 Replies
View Related
Aug 20, 2007
hi friends
1) sql connection SMTP Connection Manager 1 (windows authenditacaion/smtp both itried i was selected)
2) from/to /cc : i entered som mail ids of yahoo
3) subject : Hi koti how r u ,i am fine here
4) message source type : variable
SMTPSERVER: it is just string with null value i was declare a variable
ok fine then
how to use the send mail in the foreach loop example please send me
regards
koti
View 1 Replies
View Related
Jan 30, 2008
Hi all,
actually i m working on a store procedure in which end of the procedure when task complete it's send email to specific person, but i m having a problem using this function.
i am using
EXEC master..xp_sendmail @subject = @cmd, @recipients = @recipients, @message = @@servername
it's work fine when the outlook is configure on the server, but is there any way to send email rather then configure outlook on the server just chk internet is working send email on behalf of server,
i have more then 2 servers and outlook is configure only one server and i don't want to configure outlook on other server due to work load on server.
Thanks and looking forward.
-MALIK
View 4 Replies
View Related
Sep 6, 2007
How can i send email through sqlserver on Micrsoft Exchange?
View 2 Replies
View Related
