Can a SQL Server 2005 Compact Edition database file be deployed on a file share and be accessed by multiple (5-10) concurrent users? This is a current scenario being implemented at several sites using MS Access databases.
Each client would have the SQLce engine installed on it and would only access the database via a managed C# application.
Hi
In the "Choosing Between SQL Server 2005 Compact Edition and SQL Server 2005 Express Edition" white paper, i can read that: "SQL Server 2005 Compact Edition support data file storage on a network share" and "Number of concurrent connections = 256"
But when i try to connect with two different PC at the same time to a .sdf file store on a network share, i have an error message : "File is locked by an other processus"
The firsth PC is connected but the secondth can't
";Mode=Read Write" in the connection string don't change anything.
anybody have an idea ?
I would like to backup my databases to a network share (NAS) instead of local disk using Maintenance Plans created by Enterprise Manager. I have successfully used a UNC path to target the destination network share but have not been to figure out how to submit a logon to the network share before the backup is executed.
The SQL Server instance is running in the context of the local system account.
Can I insert a step in the SQL SQL job that is created by the Maintenance Plans that changes the Windows account that the backup runs under? If yes what command syntax would I use in the inserted step or is there another way to accomplish that I'm attempting to do?
thanks
HP
Hello,
I am trying to backup a database with a command like:
BACKUP DATABASE my DataBase TO DISK = '\bkSystemkDiskBackup1.bak'
but I get the error 'Cannot open backup device '\bkSystemkDiskBackup1.bak'. Device error or device off-line.
The bkDisk folder is shared, with Everyone full-control access (it's a test environment)
MS SQL 2000.
I attempted to backup my database to a shared drive using the UNC path and it gave me access denied. Any thoughts?
View 2 Replies View RelatedHi,I am not able to execute following command from computers other than the SQLserver itself.select * from openrowset(bulk N'\ImageServerModelCam_05.dwg',SINGLE_BLOB) as docI get following error message:Msg 4861, Level 16, State 1, Line 1Cannot bulk load because the file "\ImageServerModelCam_05.dwg " couldnot be opened. Operating system error code 5(Access is denied.).If I use local file path and keep the file on the SQL server then it worksfine from any computer.select * from openrowset(bulk N'D:ModelCam_05.dwg', SINGLE_BLOB) as docThe network share has read access for everyone.What should I do to make it work? I am not allowed to move the files and theapplication which loads them to the SQL server.ThanksSachin G
View 2 Replies View RelatedI've recently moved an asp.net website from my PC to a network share because another tech it going to be working on it. I finally got the correct permissions on the network share and the correct .NET Framework settings on my PC to be able to run the app. Now I can't access the SQL server which is on a different server. Getting the following error:
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
How to I setup access to my SQL server for the app from any given PC on my LAN?
how can Share may sqlexpress 2005 on network that other can access my databasess on their pc and edit update and insert recored into my table
please tell me how can do this ?
Hello All,
I 'm trying to attach a database to my sql server 2005 using the following syntax:
Code Snippet
DBCC TRACEON(1807, -1)
GO
EXEC sp_attach_single_file_db 'MyNetworkDB', '\leaf7dbsMyNetworkDB.mdf'
GO
Also, the folder dbs and the mdf file MyNetworkDB.mdf has full permission for Everyone.And when executing the above statement, i get the following error:
Code Snippet
DBCC execution completed. If DBCC printed error messages, contact your system administrator.
Msg 5133, Level 16, State 1, Line 1
Directory lookup for the file "\leaf7dbsMyNetworkDB.mdf" failed with the operating system error 5(Access is denied.).
Hi
I am trying to deploy the reports on the share point site which is integrated with the reports Server.
I am getting below error while deploying it.
Sharepoint Server, Reports Server and Database Servers are on 3 different boxes.
===================================
A connection could not be made to the report server http://vstsvr:171/sites/wslReports. (Microsoft Report Designer)
===================================
Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized. (System.Web.Services)
------------------------------
Program Location:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.SqlServer.ReportingServices2006.ReportingService2006.ListSecureMethods()
at Microsoft.ReportDesigner.Project.ReportServiceClient2006.CheckAuthenticated()
at Microsoft.ReportDesigner.Project.ReportClientManager.DetectEndpointAndAuthenticate(String url, ICredentials credentials, String& authCookieName, Cookie& authCookie, EndpointType& endpointType)
at Microsoft.ReportDesigner.Project.ReportClientManager.GetCredentials(String url)
at Microsoft.ReportDesigner.Project.ReportProjectDeployer.PrepareDeploy()
Can any one help on this.
Thanks
Devanand
Hey All,
This is my first time using the forums here nor am I a SQL programmer. I'm trying to help a coworker figure out how to access files from a network share (using a UNC path) from a different domain. Right now we have three domains - Production, Development, and the Local. There is a one-way trust setup with the development and local domains, so using cross domain accounts is easy. Unfortunately, we cannot setup one right now with our production domain to any of the other two domains. Is there a way to pass production credentials from our local or development domain servers to a production server share? Am I even approaching this in the right way? Maybe there is a different method, any help would be GREATLY appreciated!
-Andrew
Network Administrator
Somehow I have an impression this can be done.
Somehow I tried myself by modifying MsDtsSrvr.ini.xml to point it to network UNC share, but it didn't work for me. It gave me an error
"Failed to retrieve data for this request (Microsoft.SqlServer.SmoEnum)
Additional Information: The storage localtion for the folder 'File System' cannot be accessed. (MsDtsSrvr)"
I checked my UNC permission, and I even allow full access from "everyone", but it still does not work.
I paste my MsDtsSrvr.ini.xml here too, and any help is greatly appreciated!
<?xml version="1.0" encoding="utf-8"?>
<DtsServiceConfiguration xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<StopExecutingPackagesOnShutdown>true</StopExecutingPackagesOnShutdown>
<TopLevelFolders>
<Folder xsi:type="SqlServerFolder">
<Name>MSDB</Name>
<ServerName>.</ServerName>
</Folder>
<Folder xsi:type="FileSystemFolder">
<Name>File System</Name>
<StorePath>\test01mytest</StorePath>
</Folder>
</TopLevelFolders>
</DtsServiceConfiguration>
I have SQL Server 2014 (Enterprise) on Server A. The service runs under DomainAAdmin.
The Client machine is B, User credentials DomainBUser.
DomainBUser has a share on B that contains a BCP data file. DomainAAdmin has full access to this file.
If I log onto A (the server machine) with either DomainAAdmin or DomainBUser credentials, and run SQL Server Management Studio with Windows Authentication I can run BCP sucessfully using the following:
BULK INSERT [MyTable] from 'Bsharedatafle.tsv' WITH ( KEEPNULLS , KEEPIDENTITY ) However, if I log onto B, (the client machine and the machine hosting the share) and try to run the same bcp command, I get "Access is Denied".
Hello,
Ho do I allow multiple users to share a database?
Background
I have developed a Windows App in VS.NET 2005 which connects to a SQL 2005 Express database.
Now I want to install the app and database on the network and I am getting an error "File 'file_name' is on a network device not supported for database files"
What is the best way to get this working
Thanks in advance,
Phil
SQL Agent will not successfully execute my package as a job. Bids executes the package correctly as well as when I run the package manually (right click, run package) through SQL Server Management Studio. This is a permissions issue with the flat file any help will be much appreciated.Background Information:OS: SQL 2005 on Windows Server 2003Flat File Connection: \servernamefolderfile.txt (If I change the flat file location to a local file the package will run as a job successfully)Domain: The package is running on a Windows machine that is not on any domain. The network location is a Windows machine on a domain.Security: The network location folder (\servernamefolderfile.txt) has no security, namely anyone can access any file to read/write/delete/etc. I can manually add and delete files as well as add and delete files when the package runs through BIDS or when I manually run it through management studio.Permissions: I have created a login, security credential, and proxy which I am using to run the package. The security credential is tied to the Administrator account on the local machine.
Error Message: Executed as user: COMPUTER-NAMEAdministrator. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:05:37 PM Error: 2007-06-19 12:05:39.25 Code: 0xC001401E Source: DataTransfer Connection manager "FILECONNECTION.FileConnection" Description: The file name "\servernamefolderflatfile.txt" specified in the connection was not valid. End Error Error: 2007-06-19 12:05:39.25 Code: 0xC001401D Source: DataTransfer Description: Connection "FILECONNECTION.FileConnection" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:05:37 PM Finished: 12:05:40 PM Elapsed: 2.297 seconds. The package execution failed. The step failed.
(note: I replaced the fileconnection strings with FILECONNECTION and the serverpath with "servernamefolder" for privacy reasons.
Any help would be greatly appreciated. This is some sort of security issue with SQL Agent. But, the error claims that the user is running as localmachineAdministrator. Isn't this how the package would run if I manually execute it?
Hello,
I am experiencing an issue with SQL Server 2000 Maintenance Plan.
DB Backup job fails to delete old backup files from the file server (I am backing up to the network share - actually, a DFS).
Backup part of the maintenance plan/job succeeds, but then cleanup part fails.
I made sure that service account under which SQL Server Agent is running, has sufficient privileges over the network share by logging in and successfully deleting files in question.
I was not able to locate any log entries either on the SQL Server machine or on the file server machine that would indicate the root of the problem. Even though I turned on auditing for Delete operations for the destination folder, its subfolders and files, I could not find anything in the Security event log.
I would appreciate any ideas on how to troubleshoot and correct this problem.
Thanks in advance,
I am running Microsoft SQL Server 2012 SP on a Windows Server 2008 R2 Standard SP1 box. The SQL Server service is running as a simple windows domain user (nothing special, no admin rights, etc.) I am having some issues with using Bulk Insert when the data file is on a network share when using Windows Authentication. What is known is that the SQL Server service account has access to the network resource, which is shown by logging into SQL Server with a SQL account and doing the Bulk Insert. I also have rights to the files on the share, as shown by the fact that I put the files there. My SQL is in the form of:
Bulk Insert [table name] From '[server][share][filename]' With (FirstRow = 2, FormatFile='FormatFile.xml')
Now, when connecting to SQL Server with Windows Authentication and running the Bulk Insert I get the following error:
Msg 4861, Level 16, State 1, Line 2 Cannot bulk load because the file "[server][share][filename]" could not be opened. Operating system error code 5(Access is denied.).
I found this snip at
BULK INSERT (Transact-SQL)Security Account Delegation (Impersonation), which says, in part (emphasis mine):
To resolve this error [4861], use SQL Server Authentication and specify a SQL Server login that uses the security profile of the SQL Server process account, or configure Windows to enable security account delegation. For information about how to enable a user account to be trusted for delegation.
How to Configure the Server to be Trusted for Delegation, and we tried the unconstrained delegation and I rebooted the SQL server, but it still does not work. Later we tried constrained delegation and it still does not work.
I have verified the SPNs:
C:>setspn adsvc_sqlRegistered ServicePrincipalNames for CN=SVC_SQL,OU=Service Accounts,OU=Users,OU=ad domain,DC=ad,DC=local: MSSQLSvc/SQLQA.ad.local:1433 MSSQLSvc/SQLDev.ad.local:1433 MSSQLSvc/SQLQA.ad.local MSSQLSvc/SQLDev.ad.local
I have verified that my SQL connection is TCP and I am getting/using a Kerberos security token.
C:>sqlcmd -S tcp:SQLQA.ad.local,1433 -E1> Select dec.net_transport, dec.auth_scheme From sys.dm_exec_connections As dec Where session_id = @@Spid;2>
gonet_transport auth_scheme------------- -----------TCP KERBEROS(1 rows affected)1>
If I move the source file to a local drive (on the SQL server), all works fine, but I must be able to read from a file share?
Hello All,
I need some advise/help how to deploy a small sql server compact 3.5 database on networkshare where about 8 people have access to it(install de client ) and can modify the database with aprox 3000 records.
I'm using visual basic 2008 and created a compact database and filled it with one table of an export of an access database done with data port console.
And created a new windows forms application and saved the project.
Publish is not the problem but how too set it up......
There is not much info to find on how to get a sql server 3.5 database running on a network share.
Who can help ???
Thanks
I have integrated Share Point server 2007 with Reports Server to publish the reports on share point site. I did all steps involved for integration
I have share point server, reports server and database server on three different machines configured and when I am trying to publish the reports from my local Dev box, setting the below project properties,
target datasource folder: http://vstsvr:168/sites/wsL/ReportsLibrary/
target report folder: http://vstsvr:168/sites/wsL/ReportsLibrary/
target Server url: http://vstsvr:168/sites/wsL/
I am getting the following error:
TITLE: Microsoft Report Designer
------------------------------
A connection could not be made to the report server http://vstsvr:168/sites/wsL/.
------------------------------
ADDITIONAL INFORMATION:
Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
--
<HTML dir="ltr">
<HEAD><meta name="GENERATOR" content="Microsoft SharePoint" /><meta name="progid" content="SharePoint.WebPartPage.Document" /><meta HTTP-EQUIV="Content-Type" content="text/html; charset=utf-8" /><meta HTTP-EQUIV="Expires" content="0" /><meta name="ROBOTS" content="NOHTMLINDEX" /><title>
Error
</title><link rel="stylesheet" type="text/css" href="/_layouts/1033/styles/core.css?rev=5msmprmeONfN6lJ3wtbAlA%3D%3D"/>
<script type="text/javascript" language="javascript" src="/_layouts/1033/init.js?rev=VhAxGc3rkK79RM90tibDzw%3D%3D"></script>
<script type="text/javascript" language="javascript" src="/_layouts/1033/core.js?rev=F8pbQQxa4zefcW%2BW9E5g8w%3D%3D"></script>
<meta name="Robots" content="NOINDEX " />
<meta name="SharePointError" content=""/>
</HEAD>
<BODY scroll="yes" onload="javascript:if (typeof(_spBodyOnLoadWrapper) != 'undefined') _spBodyOnLoadWrapper();">
<form name="aspnetForm" method="post" action="../../_layouts/error.aspx" id="aspnetForm" onsubmit="return _spFormOnSubmitWrapper();">
<input type="hidden" name="__VIEWSTATE" id="__VIEWSTATE" value="/wEPDwUKLTU2NjkxODU3M2RkRs1mjkyJL3hiHYWlWaZqxb1RHhI=" />
<TABLE class="ms-main" CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%" HEIGHT="100%">
<tr><td>
<table CELLPADDING=0 CELLSPACING=0 BORDER=0 WIDTH="100%">
<tr>
<td colspan=4 class="ms-globalbreadcrumb" align="right">
<a href="javascript:TopHelpButtonClick('NavBarHelpHome')" id="ctl00_PlaceHolderGlobalNavigation_TopHelpLink" AccessKey="6" title="Help (new window)"><img src="/_layouts/images/helpicon.gif" align="absmiddle" border="0" alt="Help (new window)" /></a>
</td>
</tr>
</table>
</td></tr>
<tr>
<td class="ms-globalTitleArea">
<table width=100% cellpadding=0 cellspacing=0 border=0>
<tr>
<td id="GlobalTitleAreaImage" class="ms-titleimagearea"><img id="onetidHeadbnnr0" src="/_layouts/images/titlegraphic.gif" alt="" /></td>
<td class="ms-sitetitle" width=100%>
</td>
<td style="padding-top:8px;" valign=top>
</td>
</tr>
</table>
</td>
</tr>
<TR>
<TD id="onetIdTopNavBarContainer" WIDTH=100% class="ms-bannerContainer">
</TD>
</TR>
<TR height="100%"><TD><TABLE width="100%" height="100%" cellspacing="0" cellpadding="0">
<tr>
<td class="ms-titlearealeft" id="TitleAreaImageCell" valign="middle" nowrap><div style="height:100%" class="ms-titleareaframe"></div></td>
<td class="ms-titleareaframe" id="TitleAreaFrameClass">
<table cellpadding=0 height=100% width=100% cellspacing=0>
<tr><td class="ms-areaseparatorleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=1 alt=""></td></tr>
</table>
</td>
<td valign=top id="onetidPageTitleAreaFrame" class='ms-areaseparator' nowrap width="100%">
<table id="onetidPageTitleAreaTable" cellpadding=0 cellspacing=0 width=100% border="0">
<tr>
<td valign="top" class="ms-titlearea">
<a href="http://vstsvr:168/sites/wsL" id="ctl00_PlaceHolderTitleBreadcrumb_idSimpleGoBackToHome">Go back to site</a>
</td>
</tr>
<tr>
<td height=100% valign=top ID=onetidPageTitle class="ms-pagetitle">
<h2 class="ms-pagetitle">
Error
</h2>
</td>
</tr>
</table>
</td>
<td class="ms-titlearearight">
<div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
</tr>
<TR>
<TD class="ms-leftareacell" valign=top height=100% id="LeftNavigationAreaCell">
<table class=ms-nav width=100% height=100% cellpadding=0 cellspacing=0>
<tr>
<td>
<TABLE height="100%" class=ms-navframe CELLPADDING=0 CELLSPACING=0 border="0">
<tr valign="top">
<td width="4px"><IMG SRC="/_layouts/images/blank.gif" width=4 height=1 alt=""></td>
<td valign="top" width="100%">
</td>
</tr>
<tr><td colspan=2><IMG SRC="/_layouts/images/blank.gif" width=138 height=1 alt=""></td></tr>
</TABLE>
</td>
<td></td>
</tr>
</table>
</TD>
<td>
<div class='ms-areaseparatorleft'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
<td class='ms-formareaframe' valign="top">
<TABLE width="100%" border="0" cellspacing="0" cellpadding="0" class="ms-propertysheet">
<TR valign="top" >
<TD class="ms-descriptiontext" width="100%">
</TD>
<TD ID=onetidYPadding width="10px"><IMG SRC="/_layouts/images/blank.gif" width=10 height=1 alt=""></TD>
</TR>
<TR >
<TD ID=onetidMainBodyPadding height="8px"><IMG SRC="/_layouts/images/blank.gif" width=1 height=8 alt=""></TD>
</TR>
<tr>
<td valign="top" height="100%">
<A name="mainContent"></A>
<table width=100% border=0 class="ms-titleareaframe" cellpadding=0>
<TR>
<TD valign=top width="100%" style="padding-top: 10px" class="ms-descriptiontext">
<span id="ctl00_PlaceHolderMain_LabelMessage">The file you are attempting to save or retrieve has been blocked from this Web site by the server administrators.</span>
<P><span class="ms-descriptiontext">
<span id="ctl00_PlaceHolderMain_helptopic_troubleshooting"><A Title="Troubleshoot issues with Windows SharePoint Services. - Opens in new window" HREF="javascript:HelpWindowKey('troubleshooting')">Troubleshoot issues with Windows SharePoint Services.</A></span>
</span>
</TD>
</TR>
</table>
<script type="text/javascript" language="JavaScript">
var gearPage = document.getElementById('GearPage');
if(null != gearPage)
{
gearPage.parentNode.removeChild(gearPage);
document.title = "Error";
}
</script>
</td>
</tr>
</table>
</td>
<td class="ms-rightareacell">
<div class='ms-areaseparatorright'><IMG SRC="/_layouts/images/blank.gif" width=8 height=100% alt=""></div>
</td>
</TR>
<tr>
<td class="ms-pagebottommarginleft"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-pagebottommargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-bodyareapagemargin"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
<td class="ms-pagebottommarginright"><IMG SRC="/_layouts/images/blank.gif" width=1 height=10 alt=""></td>
</tr>
</TABLE></TD></TR>
</TABLE>
<input type="text" name="__spDummyText1" style="display:none;" size=1/>
<input type="text" name="__spDummyText2" style="display:none;" size=1/>
</form>
</BODY>
</HTML>
--. (Microsoft.ReportingServices.Designer)
------------------------------
BUTTONS:
OK
------------------------------
THanks in Advance for any help.
Devanand
When running the following statement in SQL 2005, I get the error message "Access is denied":
exec master.dbo.xp_cmdshell 'TYPE \SERVER-BSHAREFILE.TXT'
The following are true about the network:
The SQL Server is installed on SERVER-A.
SERVER-A and SERVER-B are Windows 2003 servers on the same Windows 2003 domain.
The SQL Server and SQL Server Agent services are running under the domain account SQLSERVICE.
SQLSERVICE is a member of the Domain Admins group.
The Domain Admins group is part of the local Administrators group on SERVER-B.
The SQLSERVICE account has also explicitly been given Full Control to the folder referenced by \SERVER-BSHARE
xp_cmdshell use has been enabled on the SQL Server.
If I run the following command in SQL:
exec master.dbo.xp_cmdshell 'whoami'the following is returned: DOMAINSQLSERVICE
If I change the command to access the c: drive instead of a network drive, it executes successfully.
Can anyone shed some light on why I still cannot access any of the files in this folder using xp_cmdshell?
Tim
Hi,
I have installed MSDE sql server in my system and it stored as my system name.
I careated a user and try to register in his Enterprise Manager and it is not connecting.
Can you give me some input for this issue?.
Thanks,
Ravi
I would appreciate help on how to setup database on server B when SQL Server is located on server A of a multi-server network. I am a novice.
View 3 Replies View RelatedHi,everyone.
I have defined a data type "OC_BUN_NAME" in database "CVPRO". I want to create a table tempdb.dbo.CVPRO in SQL SERVER 2005 system Database tempdb. But SQL SERVER 2005 DBMS gives a Error Messages:"Can not find the data type OC_BUN_NAME".
How can I do? How to use data types in the other database?
Please give me some advice. Thank you in advance.
Has anyone written a RSS file that is used to add new Active Directory User/Group to SSRS, and applying security ROLES such as BROWSER?
I have new IT AD group that I need to apply to ALL folders on my PROD, QA and DEV servers. Way too many folders to do via SSMS or Web interface.
Would you be willing to share the RSS file?
I am using SharePoint Services 3.0 (SP1) with default configuration options, which installs the Microsoft##SSEE instance of SQL to my local C: drive.
While attempting to relocate the files to another drive, I set one of the databases (as recommended) to Single User by using the SQL Server Management Express tool.
I cannot now reset that database to Multi User, even by executing the query
exec sp_dboption 'database_name', 'single user', ''FALSE'
again by using the Management Express Tool.
Can someone please help, in plain english???? Thanks
I have written a VB/SQL Server based application. The application uses stored procs and the SQL Server security model to handle logins and permissions. My partner and I want to sell the applicaiton to specific businesses and offer a rental program for smaller companies that would like to use the application to connect to an internet based database. The application uses TCP/IP with a specific port number to connect to the database so it can be used in or out of LAN.
If we rent the application, maintenance is simple. I just create a user in the database with the login/password the user would like and viola they have access to the data.
When a company wants to purchase the program to use in-house, we would like to offer two alternatives: #1 a single user or #2 a multiple user SQL Server database.
My question is if a company purchases the single-user version, how can we keep them from adding users to their database. In other words, since we have no control over the database at the client's location, how can we ensure that it remains a single-user database?
Thanks for any help!
Randall Medcalf
What would happen if I deploy my Asp.net Web Application with default setting of Sql Express and user instance set to true in the connection string? Where will the database be created and under whose account?
Dear all,
to restore one perticular backup set, i've made the database to single user mode, now it is not accepting me to connect to that again...
how can i bring the database to multiuser mode?
thanks in advance
Vinod
Even you learn 1%, Learn it with 100% confidence.
Is there another way for users to access reports online besides the Report Manager? Or is there a way for users to go to a URL that does not include the server? The same question goes for Report Models and Report Builder. Can they access these features without access to the server and databases?
View 3 Replies View RelatedUsing Transact SQL how can I retrieve the network user name by accessing the API apiGetUserName.
I would like to some how create a stored procedure that will retrieve the user name when a user tries to access the data in a table(s).
Can multiple users connect to SQL Server 2005 concurrently?
View 4 Replies View RelatedDoes anyone have links to various strategies for handling multi-user concurrency issues when updating data in SQL Server (2000 or 2005), either in the database (stored procedures) or via code.
I've seen a couple such as:
Check individual user updated columns to see if the database columns have changed and if not apply the updated columns (either individual updates or constructing a dynamic SQL statement).
Check all the fields for any change and if no change, update all the fields.
Check a version field for change and if no change, update all the fields.
What I haven't seen is complete solutions such as for the first one, ensuring the record is locked and can't be changed while checking for concurrency and ultimately updating the data. For the second one, how to raise an error if there was a problem, or for the third one how to ensure the record is locked between the version check and the update.
Even pieces of solutions are welcome (locking records, testing for change, etc). Just want to compare and contrast various methods as I create an infrastructure for 2005.
Thanks,
LarryC
Dear All,
i've altered my database to single user mode. and now trying to change to multi user mode with the query
alter database mydb set multi_user
but it is saying that it is in single user mode. query analyser closed.
how can i change that to multi user mode? idont know who opend that
to run sp_who it is not showing the database in dropdown list in enterprise manager.
thanks in advance
Vinod
Even you learn 1%, Learn it with 100% confidence.