New MSSQL Directories Created After Upgrade
Apr 14, 2008
Hi,
I recently upgraded my Standard Edition SQL2005 to Developer Edition SQL2005 for the default instance (MSSQLSERVER) only. I used the following command line setup.exe commands to do the job -
start /wait setup.exe ADDLOCAL=SQL_Engine INSTANCENAME=MSSQLSERVER UPGRADE=S
QL_Engine PIDKEY=OHNOYOUCANTSEETHISSORRY SKUUPGRADE=1 /qb
then
start /wait setup.exe ADDLOCAL=Analysis_Server,RS_Server INSTANCENAME=MSSQLSERVER UPGRADE=Analysis_Server,RS_Server PIDKEY=OHNOYOUCANTSEETHISSORRY SKUUPGRADE=1 /qb
(Of course I used my real PID)
I then re-installed the SP2 patches. Everything seemed fine afterwards, until I tried to process a recent cube project in Visual studio. The DATEDIFF() function failed. So I found the problem (in this forum) that the VBAMDX assembly for my SSAS session was referencing an empty bin folder, and therefore could not process VBA functions in MDX.
Now I can fix this by editing the relevant XML file in the DATA folder and restarting my SSAS service but I am concerned about all the other stuff that could be referencing old folders.
Some of the settings e.g. DATA is still in C:Program FilesMicrosoft SQL ServerMSSQL.2OLAPData
but the bin programs are now in C:Program FilesMicrosoft SQL ServerMSSQL.6OLAPData
It seems that I now have 3 new installation folders - MSSQL.5, MSSQL.6, MSSQL.7 as well as the usual .1,.2,.3 since upgrading my Edition.
Why did it make these? What else may be out of wack on the SQLServer services? How can I make sure everything is properly setup?
I guess the problem could be that there is another instance called OFFICESERVERS on the computer (a WIN2003 server) which was created by the SharePoint installation by someother guy..
adv(thanks)ance
Mark W.
View 4 Replies
ADVERTISEMENT
Feb 20, 2007
Just downloaded and installed mssql 2005 sp2 on one of our servers
All components upgrade apart from the database engine. After the first upgrade i rebooted then tried to update the db engine again it failed for a second time.
Below is the error from mssql setup, any help would be nice!
Event Type: Error
Event Source: MsiInstaller
Event Category: None
Event ID: 1023
Date: 2/20/2007
Time: 12:08:11 AM
User: DNETWORKdadmin
Computer: SGC
Description:
Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 7b 45 42 37 36 42 32 31 {EB76B21
0008: 38 2d 38 46 43 35 2d 34 8-8FC5-4
0010: 31 44 46 2d 39 46 31 46 1DF-9F1F
0018: 2d 37 46 46 33 45 30 34 -7FF3E04
0020: 34 38 33 38 33 7d 20 7b 48383} {
0028: 30 34 41 44 42 33 46 44 04ADB3FD
0030: 2d 42 32 38 36 2d 34 39 -B286-49
0038: 41 46 2d 38 35 34 45 2d AF-854E-
0040: 45 44 44 33 38 42 36 44 EDD38B6D
0048: 45 36 44 37 7d 20 31 36 E6D7} 16
0050: 30 33 03
MSSQL Setup log http://www.dwebs.ltd.uk/mssqlinstall.txt
Its a rather large file!
View 6 Replies
View Related
May 4, 2006
Looking for the best practice to upgrade a soon to expire MSSQL 2005
evaluation server to a standard production server? I understand
the license requirements. I have good backups of the
databases.
Should i just pop in a MVL mssql2005 cd and perform an in place
upgrade? Or completely remove the eval version and install clean?
Will i have to redo any SQL users i have added on this server?
Thanks for any help. If anyone has a link to a KBB article i
would be happy to read that on my own as well, i just havent been able
to locate one.
View 3 Replies
View Related
Feb 14, 2008
Writing to tables created by regular users on MSSQL2005
I have users creating tables through an application, I gave them ddl_admin, datareader, datawriter. They can create tables but cannot insert/update data (to their own tables), I cannot insert data either using Access or any other application to those tables created by them (under dbo schema) Is there something I am missing with permissions? Thank you very much
View 3 Replies
View Related
May 5, 2008
Hi,
I have recently upgrade from MS SQL 2000 to MS SQL 2005. The maintenance plan disappeared. Although the jobs are still around and running. What issues might arise from this? Thanks..
View 1 Replies
View Related
Mar 6, 2008
To whom it may concern,
I have developed a web application using ASP 3.0 with a Access DB 2002 backend. I have decided to recently to upgrade the database to SQL 2005 but I am having issues that I cannot work out because I am new to MsSql Language. It appears that the FORMAT function in Access does not work in MsSql ( does not recognise the function ) along with some of the PIVOT and TRANSFORM calls (coming up with "Syntax error near "..."") . Please see the below code. The areas that are showing up as errors when the application is run are highlighted in red.
Thanking you in advance
Darren
<!-- #include file="./../../common/includes/i_header_login.asp" -->
<link href="../../common/css/proceduremanual.css" rel="stylesheet" type="text/css">
<%Sub RecordsetToCSV(ByRef RS, ByVal CSVFilePath, ByVal IncludeFieldNames)
Set objCSVFile = CreateObject("ADODB.Stream")
Call objCSVFile.Open
If IncludeFieldNames Then
'string concatenation issues aren't a problem for a small string of field names
For Each Field In RS.Fields
If FieldNames = "" Then
FieldNames = Field.Name
Else
FieldNames = FieldNames & "," & Field.Name
End If
Next
FieldNames = FieldNames & vbCRLF
Call objCSVFile.WriteText(FieldNames, 1)
End If
Call objCSVFile.WriteText(FieldNames & RS.GetString(adClipString, , ",", vbCRLF, ""))
Call objCSVFile.SaveToFile(CSVFilePath, 2)
Set objCSVFile = Nothing
End Sub
%>
<%
function evaluate(pFormula, pUserID, pMonth, pYear)
if isnull(pFormula) then
evaluate = 0
exit function
end if
x = 0
key = ""
zero = "0"
nine = "9"
eFormula = ""
lf = len(pFormula)
for i = 1 to lf
c = mid(pFormula,i,1)
if x = 1 and c >= zero and c <= nine then key = key & c
if x = 1 and (c < zero or c > nine or i = lf) then
set rsd = cn.execute("select sum(total) from Data where UserID = " & pUserID & " and month(weekEnding) = " & pMonth & " and year(weekEnding) = " & pYear & " and GroupTaskID=" & key)
eFormula = eFormula & rsd.fields(0)
rsd.close
key = ""
if c < zero or c > nine then x = 0
end if
if c = "v" then
key = ""
x = 1
end if
if x = 0 then eFormula = eFormula & c
next
on error resume next
evaluate = round(eval(eFormula),0)
'if err then evaluate = err.description & ": " & eformula
if err then evaluate = 0
end function
%>
<%
period = split(request.form("period"),",")
if ubound(period) = 1 then
mmmm = period(0)+0
yyyy = period(1)+0
else
mmmm = 0
yyyy = 0
end if
%>
<div align="left" class="MainBodyText" style="width: 100%; height: 100%">
<div align="left" valign="top" width="200" style="margin:5; padding:3; font-family:arial; font-size:10pt; font-weight:bold; font-color000000;" >
<% if session("groupid") = 1 then%>
<a href="../main/administration.asp"> <<< Administration Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
<%if session("groupid") = 2 then%>
<a href="../main/manager.asp"> <<< Manager Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
<%if session("groupid") = 3 then%>
<a href="../main/user.asp"> <<< User Home</a>
<%end if %>
<%if session("groupid") = 4 then%>
<a href="../main/general.asp"> <<< Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
</div>
<p align="center" class="MainBodyText">
<img src="../../images/si.gif" align="center"><br><b>Month to Date Dashboard</b></p>
<p align="center" class="MainBodyText">
To use the Print Page function please select the period required then select
view report. You can then select Print Page which will print out the rendered
page.</p>
<form name="f1" method="POST" action="dialmtd.asp">
<div id="printReady">
<table align="center" border="0" width="663" style="border-collapse: collapse" bordercolor="#111111" cellpadding="2">
<tr>
<td align="left" width="127"><font face="Arial" size="2">
<select name="benchmarkgroup" style="color: #000000; border: 0px solid #000000; background-color: #FFE737">
<option value="0" <%if request.form("benchmarkgroup") = "" then response.write "selected"%>>Select Report
<% set rs = cn.execute("select TaskGroupID,TaskGroup from BenchmarkGroups where Active = 1 order by TaskGroupID")
do until rs.eof
if request.form("taskgroupid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="143"><font face="Arial" size="2">
<select name="period">
<option value="" <%if request.form("period") = "" then response.write "selected"%>>Select Period
<% set rs = cn.execute("select year(WeekEnding), month(WeekEnding), format(Weekending,""mmmm yyyy"") from data group by Year(WeekEnding), Month(WeekEnding), format(WeekEnding,""mmmm yyyy"") order by 1,2")
do until rs.eof
x = rs.fields(1) & "," & rs.fields(0)
if request.form("period") = x then selected = "selected" else selected = "" %>
<option value=<%=x & " " & selected%>><%=rs.fields(2)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="117"><font face="Arial" size="2">
<select name="stateid">
<option value="0" <%if request.form("stateid") = "" then response.write "selected"%>>All States
<% set rs = cn.execute("select stateid,state from tblState where benchmarkactive order by state")
do until rs.eof
if request.form("stateid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="127"><font face="Arial" size="2">
<select name="countryid">
<option value="0" <%if request.form("countryid") = "" then response.write "selected"%>>All Countries
<% set rs = cn.execute("select countryid,country from tblCountry where benchmarkactive order by country")
do until rs.eof
if request.form("countryid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="129"><input type="image" src="../../Images/view-report.gif" onclick="f1.submit()" name="f1" alt="Click Here to Generate Report"></td>
<td width="127"><input type="image" src="../../Images/print-report.gif" rname="printMe" onClick="printSpecial()" alt="Click Here to Print the Page"></td>
</tr>
</table>
<% if mmmm > 0 then %>
<table border="0" width="450" align="left" style="margin-left:10px; border-collapse: collapse" bordercolor="#111111" cellpadding="2" cellspacing="4">
<thead>
<tr>
<% sql = " where 1 = 1 AND BenchmarkGroup =" & request("benchmarkgroup")
if request.form("stateid")+0 then sql = sql & " and stateid = " & request.form("stateid")
if request.form("countryid")+0 then sql = sql & " and countryid = " & request.form("countryid")
set rs = cn.Execute("TRANSFORM First(UserID) SELECT description, minimum, mintype, formula FROM BenchmarksActiveUsers" & sql & " GROUP BY displayOrder, description, minimum, mintype, formula ORDER BY displayOrder PIVOT Name")
lastfield = rs.fields.count-1
s = 4 %>
<td align="left" bgcolor="#C0C0C0"><font face="Arial" color="#000000" size="2"><b>Benchmark</b></font> </td>
<td align="center" bgcolor="#C0C0C0"><font face="Arial" color="#000000" size="2"><b>Company Average</b></font> </td>
<% for i = s to lastfield %>
<% next %>
</tr>
</thead>
<tbody>
<br>
<% dim v()
do until rs.eof
min = int(rs.fields("minimum"))
mintype = rs.fields("mintype")
sumv = 0
avg = 0
n = 0
for j = s to lastfield
redim preserve v(j)
v(j) = evaluate(rs.fields("formula"),rs.fields(j),mmmm,yyyy)
sumv = sumv + v(j)
n = n + 1
next
if n > 0 then avg = round(sumv / n) %>
<tr><td></td><td align="center" valign="bottom"><font face="Arial" size="2">Target: <%=min%> <%=mintype%></font></td><td></td></tr>
<tr>
<td bgcolor="#FFFFFF">
<p align="right"><font face="Arial" size="2"><%=rs.fields("description")%></font></td>
<td bgcolor="#FFFFFF">
<p align="center"><font face="Arial" size="1"><% If (avg/min)*100 <=12 Then %><IMG SRC="../images/dial-1.gif">
<% ELSEIF (avg/min)*100 <=24 Then%><IMG SRC="../images/dial-2.gif">
<% ELSEIF (avg/min)*100 <=36 Then%><IMG SRC="../images/dial-3.gif">
<% ELSEIF (avg/min)*100 <=48 Then%><IMG SRC="../images/dial-4.gif">
<% ELSEIF (avg/min)*100 <=60 Then%><IMG SRC="../images/dial-5.gif">
<% ELSEIF (avg/min)*100 <=72 Then%><IMG SRC="../images/dial-6.gif">
<% ELSEIF (avg/min)*100 <=86 Then%><IMG SRC="../images/dial-7.gif">
<% ELSEIF (avg/min)*100 <=99 Then%><IMG SRC="../images/dial-8.gif">
<% ELSEIF (avg/min)*100 =100 Then%><IMG SRC="../images/dial-9.gif">
<% ELSEIF (avg/min)*100 <=112 Then%><IMG SRC="../images/dial-10.gif">
<% ELSEIF (avg/min)*100 <=124 Then%><IMG SRC="../images/dial-11.gif">
<% ELSEIF (avg/min)*100 <=136 Then%><IMG SRC="../images/dial-12.gif">
<% ELSEIF (avg/min)*100 <=148 Then%><IMG SRC="../images/dial-13.gif">
<% ELSEIF (avg/min)*100 <=160 Then%><IMG SRC="../images/dial-14.gif">
<% ELSEIF (avg/min)*100 <=172 Then%><IMG SRC="../images/dial-15.gif">
<% ELSEIF (avg/min)*100 <=186 Then%><IMG SRC="../images/dial-16.gif">
<% ELSEIF (avg/min)*100 =>187 Then%><IMG SRC="../images/dial-17.gif">
<%END IF%></font></td><td><img src="../images/under-target.gif"><br><br><img src="../images/over-target.gif"></td>
</tr><tr><td></td><td valign="top" align="center"><font face="Arial" size="2">Actual: <%=avg%> <%=mintype%></font><hr></td><td></td></tr><% for j = s to lastfield
color = "#000000"
if int(v(j)) < min then color="#FF0000" %>
<% next %>
</tr>
<% rs.movenext
loop
rs.close
cn.close
set cn = nothing %>
</tbody>
</table>
<% end if %>
</div>
</form>
</div>
<!-- #include file="./../../common/includes/i_footer.asp" -->
View 2 Replies
View Related
Feb 26, 2008
To whom it may concern,
I have developed a web application using ASP 3.0 with a Access DB 2002 backend. I have decided to recently to upgrade the database to SQL 2005 but I am having issues that I cannot work out because I am new to MsSql Language. It appears that the FORMAT function in Access does not work in MsSql ( does not recognise the function ) along with some of the PIVOT and TRANSFORM calls (coming up with "Syntax error near "..."") . Please see the below code. The areas that are showing up as errors when the application is run are highlighted in red.
Thanking you in advance
Darren
<!-- #include file="./../../common/includes/i_header_login.asp" -->
<link href="../../common/css/proceduremanual.css" rel="stylesheet" type="text/css">
<%Sub RecordsetToCSV(ByRef RS, ByVal CSVFilePath, ByVal IncludeFieldNames)
Set objCSVFile = CreateObject("ADODB.Stream")
Call objCSVFile.Open
If IncludeFieldNames Then
'string concatenation issues aren't a problem for a small string of field names
For Each Field In RS.Fields
If FieldNames = "" Then
FieldNames = Field.Name
Else
FieldNames = FieldNames & "," & Field.Name
End If
Next
FieldNames = FieldNames & vbCRLF
Call objCSVFile.WriteText(FieldNames, 1)
End If
Call objCSVFile.WriteText(FieldNames & RS.GetString(adClipString, , ",", vbCRLF, ""))
Call objCSVFile.SaveToFile(CSVFilePath, 2)
Set objCSVFile = Nothing
End Sub
%>
<%
function evaluate(pFormula, pUserID, pMonth, pYear)
if isnull(pFormula) then
evaluate = 0
exit function
end if
x = 0
key = ""
zero = "0"
nine = "9"
eFormula = ""
lf = len(pFormula)
for i = 1 to lf
c = mid(pFormula,i,1)
if x = 1 and c >= zero and c <= nine then key = key & c
if x = 1 and (c < zero or c > nine or i = lf) then
set rsd = cn.execute("select sum(total) from Data where UserID = " & pUserID & " and month(weekEnding) = " & pMonth & " and year(weekEnding) = " & pYear & " and GroupTaskID=" & key)
eFormula = eFormula & rsd.fields(0)
rsd.close
key = ""
if c < zero or c > nine then x = 0
end if
if c = "v" then
key = ""
x = 1
end if
if x = 0 then eFormula = eFormula & c
next
on error resume next
evaluate = round(eval(eFormula),0)
'if err then evaluate = err.description & ": " & eformula
if err then evaluate = 0
end function
%>
<%
period = split(request.form("period"),",")
if ubound(period) = 1 then
mmmm = period(0)+0
yyyy = period(1)+0
else
mmmm = 0
yyyy = 0
end if
%>
<div align="left" class="MainBodyText" style="width: 100%; height: 100%">
<div align="left" valign="top" width="200" style="margin:5; padding:3; font-family:arial; font-size:10pt; font-weight:bold; font-color000000;" >
<% if session("groupid") = 1 then%>
<a href="../main/administration.asp"> <<< Administration Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
<%if session("groupid") = 2 then%>
<a href="../main/manager.asp"> <<< Manager Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
<%if session("groupid") = 3 then%>
<a href="../main/user.asp"> <<< User Home</a>
<%end if %>
<%if session("groupid") = 4 then%>
<a href="../main/general.asp"> <<< Home</a><br><br>
<a href="manager_report.asp"> <<< Managers Report Home</a>
<%end if %>
</div>
<p align="center" class="MainBodyText">
<img src="../../images/si.gif" align="center"><br><b>Month to Date Dashboard</b></p>
<p align="center" class="MainBodyText">
To use the Print Page function please select the period required then select
view report. You can then select Print Page which will print out the rendered
page.</p>
<form name="f1" method="POST" action="dialmtd.asp">
<div id="printReady">
<table align="center" border="0" width="663" style="border-collapse: collapse" bordercolor="#111111" cellpadding="2">
<tr>
<td align="left" width="127"><font face="Arial" size="2">
<select name="benchmarkgroup" style="color: #000000; border: 0px solid #000000; background-color: #FFE737">
<option value="0" <%if request.form("benchmarkgroup") = "" then response.write "selected"%>>Select Report
<% set rs = cn.execute("select TaskGroupID,TaskGroup from BenchmarkGroups where Active = 1 order by TaskGroupID")
do until rs.eof
if request.form("taskgroupid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="143"><font face="Arial" size="2">
<select name="period">
<option value="" <%if request.form("period") = "" then response.write "selected"%>>Select Period
<% set rs = cn.execute("select year(WeekEnding), month(WeekEnding), format(Weekending,""mmmm yyyy"") from data group by Year(WeekEnding), Month(WeekEnding), format(WeekEnding,""mmmm yyyy"") order by 1,2")
do until rs.eof
x = rs.fields(1) & "," & rs.fields(0)
if request.form("period") = x then selected = "selected" else selected = "" %>
<option value=<%=x & " " & selected%>><%=rs.fields(2)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="117"><font face="Arial" size="2">
<select name="stateid">
<option value="0" <%if request.form("stateid") = "" then response.write "selected"%>>All States
<% set rs = cn.execute("select stateid,state from tblState where benchmarkactive order by state")
do until rs.eof
if request.form("stateid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="127"><font face="Arial" size="2">
<select name="countryid">
<option value="0" <%if request.form("countryid") = "" then response.write "selected"%>>All Countries
<% set rs = cn.execute("select countryid,country from tblCountry where benchmarkactive order by country")
do until rs.eof
if request.form("countryid")+0 = rs.fields(0) then selected = "selected" else selected = "" %>
<option value=<%=rs.fields(0) & " " & selected%>><%=rs.fields(1)%>
<% rs.movenext
loop
rs.close %>
</select>
</td>
<td align="left" width="129"><input type="image" src="../../Images/view-report.gif" onclick="f1.submit()" name="f1" alt="Click Here to Generate Report"></td>
<td width="127"><input type="image" src="../../Images/print-report.gif" rname="printMe" onClick="printSpecial()" alt="Click Here to Print the Page"></td>
</tr>
</table>
<% if mmmm > 0 then %>
<table border="0" width="450" align="left" style="margin-left:10px; border-collapse: collapse" bordercolor="#111111" cellpadding="2" cellspacing="4">
<thead>
<tr>
<% sql = " where 1 = 1 AND BenchmarkGroup =" & request("benchmarkgroup")
if request.form("stateid")+0 then sql = sql & " and stateid = " & request.form("stateid")
if request.form("countryid")+0 then sql = sql & " and countryid = " & request.form("countryid")
set rs = cn.Execute("TRANSFORM First(UserID) SELECT description, minimum, mintype, formula FROM BenchmarksActiveUsers" & sql & " GROUP BY displayOrder, description, minimum, mintype, formula ORDER BY displayOrder PIVOT Name")
lastfield = rs.fields.count-1
s = 4 %>
<td align="left" bgcolor="#C0C0C0"><font face="Arial" color="#000000" size="2"><b>Benchmark</b></font> </td>
<td align="center" bgcolor="#C0C0C0"><font face="Arial" color="#000000" size="2"><b>Company Average</b></font> </td>
<% for i = s to lastfield %>
<% next %>
</tr>
</thead>
<tbody>
<br>
<% dim v()
do until rs.eof
min = int(rs.fields("minimum"))
mintype = rs.fields("mintype")
sumv = 0
avg = 0
n = 0
for j = s to lastfield
redim preserve v(j)
v(j) = evaluate(rs.fields("formula"),rs.fields(j),mmmm,yyyy)
sumv = sumv + v(j)
n = n + 1
next
if n > 0 then avg = round(sumv / n) %>
<tr><td></td><td align="center" valign="bottom"><font face="Arial" size="2">Target: <%=min%> <%=mintype%></font></td><td></td></tr>
<tr>
<td bgcolor="#FFFFFF">
<p align="right"><font face="Arial" size="2"><%=rs.fields("description")%></font></td>
<td bgcolor="#FFFFFF">
<p align="center"><font face="Arial" size="1"><% If (avg/min)*100 <=12 Then %><IMG SRC="../images/dial-1.gif">
<% ELSEIF (avg/min)*100 <=24 Then%><IMG SRC="../images/dial-2.gif">
<% ELSEIF (avg/min)*100 <=36 Then%><IMG SRC="../images/dial-3.gif">
<% ELSEIF (avg/min)*100 <=48 Then%><IMG SRC="../images/dial-4.gif">
<% ELSEIF (avg/min)*100 <=60 Then%><IMG SRC="../images/dial-5.gif">
<% ELSEIF (avg/min)*100 <=72 Then%><IMG SRC="../images/dial-6.gif">
<% ELSEIF (avg/min)*100 <=86 Then%><IMG SRC="../images/dial-7.gif">
<% ELSEIF (avg/min)*100 <=99 Then%><IMG SRC="../images/dial-8.gif">
<% ELSEIF (avg/min)*100 =100 Then%><IMG SRC="../images/dial-9.gif">
<% ELSEIF (avg/min)*100 <=112 Then%><IMG SRC="../images/dial-10.gif">
<% ELSEIF (avg/min)*100 <=124 Then%><IMG SRC="../images/dial-11.gif">
<% ELSEIF (avg/min)*100 <=136 Then%><IMG SRC="../images/dial-12.gif">
<% ELSEIF (avg/min)*100 <=148 Then%><IMG SRC="../images/dial-13.gif">
<% ELSEIF (avg/min)*100 <=160 Then%><IMG SRC="../images/dial-14.gif">
<% ELSEIF (avg/min)*100 <=172 Then%><IMG SRC="../images/dial-15.gif">
<% ELSEIF (avg/min)*100 <=186 Then%><IMG SRC="../images/dial-16.gif">
<% ELSEIF (avg/min)*100 =>187 Then%><IMG SRC="../images/dial-17.gif">
<%END IF%></font></td><td><img src="../images/under-target.gif"><br><br><img src="../images/over-target.gif"></td>
</tr><tr><td></td><td valign="top" align="center"><font face="Arial" size="2">Actual: <%=avg%> <%=mintype%></font><hr></td><td></td></tr><% for j = s to lastfield
color = "#000000"
if int(v(j)) < min then color="#FF0000" %>
<% next %>
</tr>
<% rs.movenext
loop
rs.close
cn.close
set cn = nothing %>
</tbody>
</table>
<% end if %>
</div>
</form>
</div>
<!-- #include file="./../../common/includes/i_footer.asp" -->
View 5 Replies
View Related
Aug 1, 2006
I have clients that have the MSDE version installed and we need to upgrade there program to the MSSQL 2005. Is there an easy way to convert the data? Should or Could I uninstall MSDE and than install MSSQL2005 WorkGrp? Will there data be affected? Any tips would be appreciated.Thanks!
View 1 Replies
View Related
Aug 31, 2000
we have snapshot replication set up between 2 servers. works like a charm... :-)
the problem is this: several agents are set to run every half hour (snapshot & distribution). every time they run, the agents create a new directory entry under MSSQL7REPLDATA (naming convetion: YYYYMMDDHHMMSS) and load it with files....
needless to say, after several days there are a LOT of directories. right now, we remove them manually, which is time consuming and a pain in the ass...
how do i configure SQL server to only make 1 or 2 dozen directory entries before starting to recycle them?
if this is a really simple fix everyone here knows, my apologies for clutering the board with a 'newbie' post. i'm not really a DBA, i was just 'volunteered'!... :-)
View 2 Replies
View Related
Mar 6, 2008
I've been trying to look for information about using an SQL 2005 database with ASP.NET 2.0 - while there are loads of different articles coving configuring a database to use with asp.net, I cannot find anything on securing a sub-folder in my asp.net application. At the moment I am successfully connecting to, and validating users via a login page in my asp.net application, however, this is all pointless since I can still browse to the pages without logging in! I have tried putting in the usual <location> tags in my root web.config file and asp.net throws an error referring to my connection string, I have also tried adding a web.config file to the sub-directory, but that just uses the windows login, and I can't find anything that'll allow me to tie my own login page to it... Arrrgh! Any help will be greatly appreciated!
Thanks in advance.
View 3 Replies
View Related
Oct 16, 2000
I have a machine where the SQL "data" directory was installed on the smaller drive instead of the larger drive. What do I have to do to move the existing databases? (Backup/restore, or detach - move it physically, then attach?)
Thanks, for the help
View 3 Replies
View Related
Sep 13, 2007
Has anyone ever had a need to backup to multiple directories? I am building a general purpose stored procedure to do various types of backups, and I was wondering if the need to do this is common enough to make it worth the effort.
Example of backup to multiple directories:
backup database [MyBigDatabase]
to
disk= 'D:BACKUPMyBigDatabase_db_200709131454_001.BAK' ,
disk= 'E:BACKUPMyBigDatabase_db_200709131454_002.BAK' ,
disk= 'F:BACKUPMyBigDatabase_db_200709131454_003.BAK' ,
disk= 'G:BACKUPMyBigDatabase_db_200709131454_004.BAK' ,
disk= 'H:BACKUPMyBigDatabase_db_200709131454_005.BAK'
with
init,
stats = 5
CODO ERGO SUM
View 20 Replies
View Related
Sep 30, 2007
Hi
I'm pulling my hair out on this one..... Installed SQLServer 2005 Express and upscaled my website and intranet site that runs my photo image library.
All my thumbnails and images are in a local D drive, while my site root is in C drive. I.e. <img src="file:///D|/Images-WMASTER......etc
Images will now not display. I've checked folder & sharing permissions, IIS permissions, all the usual stuff, but still with no luck after 2 weeks #@%$$@!!
If I change to a networked folder, such as <img src="file:///S|/Images-WMASTER...etc then they show fine.
All I can think is that there is some permissions issue with SQLServer that I'm unaware of.
Your erudite advice would be greatly appreciated!
Thanks, Rob
View 7 Replies
View Related
Jun 29, 2015
trying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName] Go CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
View 3 Replies
View Related
Jan 11, 2006
I'm planning to establish a recovery plan for my SQLServer 2000databases. How to change home and data directories?
View 3 Replies
View Related
May 3, 2007
Hey All,
I'm tring to figure out the best way to organize my reports.
When I create a new Reporting Service Project throught the 2005 .NET IDE, I'm allowed to have 1 folder in the project to deploy to. I've tried adding folders under the default Reports folder, but I haven't found a way to do this. I'd like to be able to add more directories so I can deploy them right to the server, and they will be in the proper folders, with the correct access rights.
A developer here has offered the approach of One Report - One Project. I don't want to do this because the reports have so much in common, like datasources, that I don't want to be flipping back an forth from one project to the next.
I did also look to see if there was a way to assign a dircetory to each report, rather than the project level, but I didn't see way to do that. I also, tried to add folder through the Windows Explorer and see if I could get around this restriction, but no luck there either.
Anyway, How is everyone else organizing they projects?
Eric Wild
View 1 Replies
View Related
Aug 4, 2015
I'm curious if there's a "best practice" for setting up the data directories MS SQL will use for each operation? I've allocated independent disks for things like C: (OS), E: (DATA), etc etc etc but I'm not familiar w/ MS SQL to understand how DBA's commonly configure the folders under each unique disk for things like DATA, LOGS, BACKUP, INDEXES, and TEMPDB. Should I have an identically name folder as show below in my example?
You can see I've just mirrored the drive name to a new folder under the partition so data is being written to: F:DATA and E:LOGS. Is this considered correct / good practice? I assume naming the folder in each mount point to whatever I logically called the drive is correct but if I should change how I configure my drive paths above. I'm trying to learn common good SQL Server practices and while I work on properly installing SQL Server 2012/2014, I want to make sure I configure my partition names SQL will utilize correctly.
View 1 Replies
View Related
Apr 9, 2008
Hey,
What I am trying to achieve currently with SSIS is to view the content in one folder for example 'New' and if there is files in this then move it to 'Archived'.
Any nice liinks or tutorial or general advice you guys could give me ?
View 13 Replies
View Related
Apr 15, 2015
SQL 2008
I have a table that has company id, attachment file name, folderexists columns.
First what I need to do is create a series of folder or directories on a networked server using the company id as the folder name where the folder name does not already exist.
Second I need to move files based on attachment file name and company id to the proper folder.
For those who want to know, this is a remediation project because of a bug in our application.
The application is supposed to created the folder based on company id and then put the attachment in that folder.
View 9 Replies
View Related
Mar 19, 2007
I have sql server reporting services installed .
I have reinstalled the iis .
But now when i ever i reinstalled the reporting services i can't see any virtual directory in IIS.
SSRS installed successfully but no virtual directory
Now please let me help in making the virtual directories of sql server 2005 reporting services.
When I reinstall then if i try to connect with management studio I can't.
If i try to check surface area configuration i get following message
"Reporting services is not configured properly sqlsac"
View 1 Replies
View Related
Jan 29, 2008
Hi,
I have uninstalled and reinstalled several times and I can't get Reporting Services to create the virtual directories in Default Web Site, instead it creates a new web site called Report Server with the virtual directories under that, this Report Server website points to C:Program FilesMicrosoft SQL ServerInetPubwwwroot. Any ideas as to why this happens? My Default Web Site is called Default Website from the initial IIS install , I am on XP Pro SP 2 with IIS 5.1.
This is an issue for me since I don't want to have on another site that doesn't have the aspnet mapings.
I am dumbfounded and can't figure out what to do to make it not do that with the default configuration option checked during install. Should I uninstall and reinstall again and not use the default configuration?
Regards,
Chris
View 3 Replies
View Related
Aug 24, 2015
I contact you because we installed Report Services 2012 and after configuring werb service URL, database, Report Manager URLs... the URLs linked to the Report server + Report Manager does not work.After searching in IIS, it seems that even if virtual directories are created, they are linked to directories which does not exist :- c:Program FilesMicrosoft SQL ServerMSRS11.ReportReporting Services does contain only LogFiles and RSTempFiles directories.
View 7 Replies
View Related
Aug 11, 2004
How many result-rows does mssql return should be used asynchronous method to use mssql cursor, can get the best performance in any time in any result offset?
i want to make the cursor fast in any time whatever how many results returned
View 2 Replies
View Related
Feb 10, 2008
Hi,
i was planning to create a database migration tool ..
its a certain database of a DMS (document management system) to
another DMS (two different DMS)... from DMS using msde 2000 server .. and tranfer to a DMS using a postgre sql or mssql .. depends ..
they have different table structures and names . . :D
i was thing of what language shall i use.. or what language is the best to work on this kind of project :)
hoping for your kind help guys. thanks :)
br
Frozenice
View 1 Replies
View Related
Nov 29, 2006
When attemping to install SQL 2005 Express using the following command line arguments
/qb UPGRADE=SQL_Engine INSTANCENAME=MY_INSTANCE
or
/qb UPGRADE=SQL_Engine INSTANCENAME=MY_INSTANCE SECURITYMODE=SQL SAPWD=MY_PASSWORD
the following error occurs.
Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Edition check:
Your upgrade is blocked because of edition upgrade rules. For more information about edition upgrades, see the Version and Edition Upgrades topic in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
The following version and editions have been verified.
1. .NET 2.0 installed
2. Windows XP SP2
3. MSDE 8.00.2039(SP4)
4. all MSDE databases are owned by sa
5. Instance and SQLAgent running under user that is member of Administrators
What are the possible reasons this error is occurring?
View 4 Replies
View Related
Sep 6, 2006
Does enabling/disabling Data Execution Prevention have a performanceimpact on SQL 2000 or SQL 2005?For SQL best performance - how should I configure for:Processor Scheduling:Programs or Background servicesMemory Usage:Programs or System Cache
View 9 Replies
View Related
Mar 24, 2008
Hi,
I am a bit new to the MSSQL server. In our application, we use so many SQL queries. To imporve the performance, we used the Database enigine Tuning tool to create the indexes. The older version of the application supports MSSQL 2000 also. To re-create these new indexes, I have an issue in running these "CREATE INDEX" commands as the statements generated for index creation are done in MSSQL 2005. The statements include "INCLUDES" keyword which is supported in MSSQL 2005 but not in MSSQL 2000.
Ex:-
CREATE INDEX IND_001_PPM_PA ON PPM_PROCESS_ACTIVITY
(ACTIVITY_NAME ASC, PROCESS_NAME ASC, START_TIME ASC, ISMONITORED ASC)
INCLUDE
(INSTANCE_ID, ACTIVITY_TYPE, STATUS, END_TIME, ORGANIZATION);
Any help in creating such indexes in 2000 version is welcome.
Thanks,
Suresh.
View 2 Replies
View Related
May 3, 2008
Hello
We are using SQL 2005 and now we are planning to use SQL 2000. what are the ways to do the process.
We taken the script spcificall for 2000 and run it in SQL 200. But we are getting the error in SCRIPT?
Could you please give me the step to do?
Thanks,
Sankar R
View 6 Replies
View Related
May 13, 2008
We have a server instance on SQL Server 2005 SP2 build 3042. We have a 32 bit x86 server. We attempted to upgrade to SP2 build 3054 KB934458. And we got the following error as stated in the Summary.txt file.
Code Snippet
**********************************************************************************
Product Installation Status
Product : SQL Server Database Services 2005 (MSSQLSERVER)
Product Version (Previous): 3042
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB934458_sqlrun_sql.msp.log
Error Number : 29538
Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: e:SQLDatamssqlsystemresource1.ldf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
----------------------------------------------------------------------------------
The client tools and workstation components were successfully installed. The server is still reporting build 3042.
Here is the portions of the HotFix.log file.
Code Snippet
05/12/2008 09:19:09.041 Copy Engine: Creating MSP install log file at: C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB934458_sqlrun_sql.msp.log
05/12/2008 09:19:09.072 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
05/12/2008 09:19:09.103 Registry: Cannot read registry key value "Debug"
05/12/2008 09:21:29.382 MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: e:SQLDatamssqlsystemresource1.ldf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
05/12/2008 09:22:33.678 MSP returned 1603: A fatal error occurred during installation.
05/12/2008 09:22:33.724 Registry: Opened registry key "SoftwarePoliciesMicrosoftWindowsInstaller"
Any help would be appreciated.
View 3 Replies
View Related
Oct 26, 1999
Hello:
I am currently work on mssql 6.5. On my workstation, I have mssql 6.5
cient software.
However, I would like to install mssql 7.0 server on my nt workstation
and work with it to become familiar with 7.0. Can I install mssql 7.0
server on my nt workstation? Can mssql 6.5 client coexist with mssql 7.0
on the same machine if they are in different directories?
Thanks.
David Spaisman
View 1 Replies
View Related
Jun 15, 2006
Ben writes "I have a sql script that doesn't function very well when it's executed on a SQL 2000 server.
The scrpt looks like this:
---------------------------------------------------------------------------------------------------
USE [master]
GO
IF NOT EXISTS (SELECT * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
EXEC sp_addlogin N'SSDBUSERNAME', N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
If EXISTS (Select * FROM master.dbo.syslogins WHERE loginname = N'SSDBUSERNAME')
ALTER LOGIN [SSDBUSERNAME] WITH PASSWORD=N'SSDBPASSWORD'
GO
GRANT ADMINISTER BULK OPERATIONS TO [SSDBUSERNAME]
GO
GRANT AUTHENTICATE SERVER TO [SSDBUSERNAME]
GO
GRANT CONNECT SQL TO [SSDBUSERNAME]
GO
GRANT CONTROL SERVER TO [SSDBUSERNAME]
GO
GRANT CREATE ANY DATABASE TO [SSDBUSERNAME]
GO
USE [master]
GO
IF EXISTS (select * from dbo.sysdatabases where name = 'ISIZ')
DROP DATABASE [ISIZ]
GO
USE [SurveyData]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
GO
USE [SurveyManagement]
GO
exec sp_adduser 'SSDBUSERNAME'
GRANT INSERT, UPDATE, SELECT, DELETE
TO SSDBUSERNAME
---------------------------------------------------------------
I need to be converted to a script that can be executed on both MSSQL 2000 and MSSQL 2005.
I was wondering if somebody there could help me with this problem?!
Thanks,
Ben"
View 1 Replies
View Related
Nov 17, 2007
I've been tasked to move our production databases on MSSQL 2000 to 2005. I've supported MSSQL since version 6.5 and performed migrations to successor versions.
Current Environment is MSSQL 2000 32-bit with current Service Packs.
I've performed mock migrations on Test servers upgrading all Production instances simultaneously from MSSQL 2000 to 2005 32-bit. The Test environment is identical to Production minus server name, IP etc. Also I have a separate server with MSSQL 2005 installed where I use the DETACH / ATTACH and BACKUP / RESTORE method for migration / acceptance testing. There are approximately 30 databases totaling 70 GB. This has gone as expected and fairly successful. Vendors have been coordinated with to update code and staff for acceptance testing.
I'd prefer going directly to MSSQL 2005 64-bit instead if possible due to memory benefits etc. This is where I'd like some feedback prior to borrowing a 64-bit server for testing.
Upgrade options:
1. Is it better to migrate from MSSQL 2000 32-bit to 2005 64-bit via:
a. DETACH / ATTACH
b. BACKUP / RESTORE
c. Is one method more advantageous relating to the end result?
2. Regarding XP clients, have issues been experienced with the default SQL Server driver or is an alternate recommended for XP clients to connect to a MSSQL 64-bit server databases?
3. If you have performed this migration and have relevant experience please pass them along.
View 3 Replies
View Related
Jan 19, 2007
Hi,
We are performing a SQL 2005 SP1 upgrade from SQL 2000 on our Windows 2003 SP1 Standard Edition.
When we run the upgrade, we got a error "Upgrade Advisor Return -1" as a pop-up window.
When we run the Upgrade Advisor separately, we get this error :
===================================
Common Language Runtime detected an invalid program.
===================================
Common Language Runtime detected an invalid program. (System.Xml)
------------------------------
Program Location:
at System.Xml.Schema.SchemaInfo..ctor()
at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable)
at System.Xml.XmlReaderSettings.get_Schemas()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh()
at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)
We are in a lost for solutions. We do hope to hear from anyone asap...
Greatly appreciated for any kind assistance.
Thanks.
View 1 Replies
View Related
