Server: Msg 9002, Level 17, State 2, Procedure spPFW_Get_Financial_Data, Line 145
[Microsoft][ODBC SQL Server Driver][SQL Server]The log file for database 'tempdb' is full. Back up the transaction log for the database to free up some log space.
When I use the tools/backup database it will not let me select backup transaction log or fails the bacup of the tempdb database with a msg saying : 'Backup and restore operations are not allowed on database tempdb'
I am getting this error in my SQL Server 2005 server. It is saying that one of my databases transaction log file is full, but I am a little confused.
I googled this the other day and found a threat here, but I was having problems with the search function. I wasn't getting anything back. Hate to repost.
Anyway, the DB is in simple recovery mode. The disk that it is on has plenty of space; 80+gigs.
I cannot recall the T-SQL command to be able to query of sys.databases to find infor on 'log_reuse_wait_desc' (I am really new to SQL).
Does anyone have some suggestions and help? Can someone help me with the t-sql command to use against sys.databases?
DB is in SIMPLE recovery mode (total size 124 GB). Log file Initial size is 650 MB auto growth set for 500 MB.
Below is the error I am facing.
Could not clear 'DIFFERENTIAL' bitmap in database 'DBSAPCAD' because of error 9002. As a result, the differential or bulk-logged bitmap overstates the amount of change that will occur with the next differential or log backup. This discrepancy might slow down later differential or log backup operations and cause the backup sets to be larger than necessary. Typically, the cause of this error is insufficient resources. Investigate the failure and resolve the cause. If the error occurred on a data backup, consider taking a data backup to create a new base for future differential backups.
A nonrecoverable I/O error occurred on file "//SQLDIFF/SAPCAD_DBSAPCAD.bak:" 995(The I/O operation has been aborted because of either a thread exit or an application request.).BACKUP DATABASE is terminating abnormally.
In the weekend we faced an error on the DB backup.Drive K got full because of database log file grown and we have 4 MB free space left. I have no option to increase the drive space nor the log file size.
I am unable to perform, full or differential backup for this db.
Hi there I sorry if I have placed this query in the wrong place. I'm getting to grips with ASP.net 2, slowly but surely! When i try to access my site which uses a Sql Server 2005 express DB i am receiving the following error:
Server Error in '/jarebu/site1' Application.
Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Database 'd:hostingmemberasangaApp_DataASPNETDB.mdf' already exists.Could not attach file 'd:hostingmemberjarebusite1App_DataASPNETDB.MDF' as database 'ASPNETDB'.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210
This is the connection string that I am using: <connectionStrings> <add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|ASPNETDB.MDF;Integrated Security=True;Initial Catalog=ASPNETDB;User Instance=True" providerName="System.Data.SqlClient"/> </connectionStrings>
The database is definitly in the folder that the error message relates to. What I'm finding confusing is that the connection string seems to be finding "aranga"s database. Is it something daft?
I have database with unlimited growth in Data with 2MB growth and Log File with 1MB growth. The continuous data is inserted with min 20KB per minute. We struct with following error and Log file size is too large (85GB) than Data file(20GB). Now server is not allowing to take backup as diskspace is not available.
Msg 9002, Level 17, State 2, Procedure DumpData, Line 10 The transaction log for database '%DB' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Please help me to resolved the issue and let me know hints to shrink LOG file. Data inserted are using ADO applications that uses some insert/select stored procedures that does not have begin transaction-Commit Transaction block as appliction issues the Commit over connection object.
I'm currently using a shopping cart software called .netCart, which is in ASP.NET and VB. I have been trying to import my local "fully working" database to my remote server using Enterprise Manager via the DTS Export/Import Wizard, but then the exported remote database is not working with the software. Unfortunately, I have no prior experiences in MS SQL database at all, nor do I know anything about the scripts they used with the software I purchased.
Error message when attempting to run part of the software (website) with the exported database -
"Cannot insert the value NULL into column 'CustomerID', table 'tablename.dbo.Customers'; column does not allow nulls. INSERT fails. The statement has been terminated. [Customer Table]"
I simply used the DTS wizard to export the database. All settings are left "default" because I don't know what I should do about them....
1) At Specify Table Copy or Quert, "Copy table(s) and view(s) from the source database is selected. 2) Selected all tables. At the "Column Mappings and Transformations" window for all tables, "Create detination table" is SELECTED and "Enable identify insert" is UNCHECKED. 3) At one of the error table (i.e. Customers), the CustomerID int is NOT NULL.
Sorry, I do not know what's wrong with it, and I don't know how to explain it better technically. The software company do not support this as well.
I believe the problem is with the settings in the DTS wizard when I try to export the database. Something is not set right, but I don't know how to do it.
Can anyone please try to solve this problem for me? Thank you very much.
Hi guys, Your help please. First off, I have searched the Forum for answers using the keywords and tried those clues first but with no luck. This one for example: http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q282254
I had a copy of MSDE installed on my machine about 12 month ago but never used it so I uninstalled it. Then I downloaded and installed SQL Server 120-day Evaluation edition a few days ago. When I tried to run SQL Server I get An error 1069 – (The service did not start due to logon failure)…
I’m using Windows XP.
How can I find out what the password is or how can I reset it so the SQL Server logon works?
I'm struggling with the problem which feels like it shouldn't be taking me this long! Any help would be gratefully received. Simply, there are two tables: Users: userid | username Links: sourceUserId | destUserId sourceUserId and destUserId are both in the users table. I'm trying to write a SP which will output the names of the linked users. eg: Bob | Alice Alice | Geoffrey Peter | Bob Any help gratefully received! Thanks in advance -- Chris
I've seen this question asked when I searched, but I didn't see an answer that looked like it applied to me, so I'll ask again.....
Making the transition from VB 6 to VB.NET and decided to take a stab at database programming while I'm at it. I bought "Database Programming with Visual Basic.NET and ADO.NET" by Sams Publishing and ran into problems in the first chapter. I've posted some questions on the microsoft.public.vb.database newsgroup and got some help, but it's still not working.
I'll skip some of the boring stuff and dive right in with what I've found out so far:
From MSSQL$VSDOTNETLOGERRORLOG
2004-11-19 02:29:34.71 spid3 SQL global counter collection task is created. 2004-11-19 02:29:34.76 spid3 Warning: override, autoexec procedures skipped. 2004-11-19 02:29:58.87 spid51 Error: 15457, Severity: 0, State: 1 2004-11-19 02:29:58.87 spid51 Configuration option 'allow updates' changed from 0 to 1. Run the RECONFIGURE statement to install.. 2004-11-19 02:29:59.01 spid51 Error: 15457, Severity: 0, State: 1 2004-11-19 02:29:59.01 spid51 Configuration option 'allow updates' changed from 1 to 0. Run the RECONFIGURE statement to install.. 2004-11-19 02:29:59.46 spid3 SQL Server is terminating due to 'stop' request from Service Control Manager.
The last suggestion was to uninstall and reinstall. I uninstalled VS and SQL and reinstalled getting the same error message in the log, but the message box said that installation was complete.
On the Server Explorer of the IDE, it shows my computers name (programmer) under Servers. When I expand that and expand SQL Servers, I see PROGRAMMERVSDOTNET. When I try to expand that, I get the SQL Server Login window with Server textbox disabled saying PROGRAMMERVSDOTNET and the Database blank. Under the Login it has James (my sign in name) and asks for a password. When I did the MS-DOS CLI installation, I used "password" as the SAPWD. I tried using password, and tried using the password to log on as James, and get the same error message: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Any help would be appreciated, as long as you remember that I am a COMPLETE newbie at this. I'm fairly computer literate, but I don't know the first thing about databases.....
I got the error message: "The metadata of the following output columns does not match the metadata of the external columns with which the output columns are associated". What does that mean and how am I supposed to fix the problem?
TIA,
Barker
P.S. The SSIS UI seems extremely slow and sluggish (opening, creating connections). Any performance tweaks known? (I have 9GB of RAM on my box and plenty of HD space so I don't think that is it. I also have sql 2005, sp1 installed.)
Hello, I am admittedly new to this, especially sql server and am in need of a pro's assistance.. I installed Microsoft Small Business accounting, which in turn installed and configured a sql server. When I installed ACT! 2005 (v7.0) and tried to create a database, it states that it cannot find the master file.... so I tried to install sql server from Microsofts site - downloaded all the packages, unzipped them and ran them... the error I get is that the sql server needs to have an sa password and to use some switch to change it... for the life of me I am lost here. I can't use ACT! at this point and I have not ideas of how to remove, reinstall or repair the sql server.... Any help you can provide would be greatly appreicated!
i downloaded and installed SQL SERVER 2005 EXPRESS. i tried to convert an "ACCESS" database to sql and got the next error:
: "AN ERROR OCCURED WHILE ESTABLIDHING A CONNECTION TO THE SERVER. WHEN CONNECTING TO SQL 2005, THIS FALIURE MAY BE COUSED BY THE FACT THAT UNDER THE DEFAULT SETTINGS SQL SERVER DOES NOT ALLOW REMOTE CONNECTIONS. PROVIDOR NAMED PIPES ERROR 40 - COULD NOT OPEN A CONNECTION TO SQL SERVER".
I have a stored procedure that takes 18 hours to complete. SometimesI get the below error message when I run the stored procedure.'Server : Msg 9002, Level 17, State 6, Line 1 The log file fordatabase 'Customer' is full. Back up the transaction log for thedatabase to free up some log space.'.I checked my log file and it is not full. And I don't know why I amgetting this message. Any help is appreciated.Thanks,Anjula
I've been looking over this and can't see anything wrong. Can anyone shed some light on this for me? ------------------
Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0117: 'System.Data.SqlClient.SqlConnection' does not contain a definition for 'ExecuteReader'
Source Error:
Line 16: SqlCommand myComm = new SqlCommand("SELECT users, password FROM users WHERE username='" + username + "' AND password='" + password + "'", myConn); Line 17: myConn.Open(); Line 18: SqlDataReader myReader = myConn.ExecuteReader(); Line 19: do Line 20: {
Hopefully this is the right place to post this, I am trying to learn ADO.Net programming using VWD Express with SQL Express... I tried to do the walk-through tutorial on ADO.Net through the asp.net tutorial. The walk-through asked you to download and install a script (check) then it said to open a command window with sql server running (check) and then to copy all of this special script code into to bind the database to the web page (not check). Everything pretty much went down hill after that part. I couldn't get the Update/Cancel/Delete buttons. After that dissapointing attempt at learning I decided to just try and make my own database. All was going pretty well until I try to add the UPDATE/DELETE fields after adding the WHERE clause. No go. So, I don't know if I'm just totally flubbing this up or if this is a common problem. Do I need the two or three pages of custom script like the Microsoft example to make a database work?
1 Hi, I'm a complete newbie at this, and need some help I want to import a text file into a DB. I know how to set it up in the DTS, however when I check the DB each line from the text file is in a seperate row. What have I missed? I want the file just in one row, like its a memo.
2 What do I use to connect to a SQL DB on the web so i can see the DB and all the tables
3 Also if I want to add data to a DB is that done on the server, or do I change my copy of the DB and re-upload
I've imported an access .mbd table into SQL 7.0, and need to know the best way to overwrite my SQL 7.0 table with the new Updated information that is contained in the access table. I've read a little bit about update tables, but is there an easy way to overwrite an entire table without having to specify each row and column?
Ok, not sure if this is where i should post this, but here goes.
I am trying to setup a database to handle RMA stuff at work. I need to be able to access the DB from numerous systems at once. Now i know NOTHING about SQL or any other DB for the most part. Messed around with Access some, but nothing major.
Is there anyone that could help me, explain how, or at least point me in the right direction?
I have MS SQL server 2000. Any help, ideas, or suggestions would be great!!
Hey! I',m totally new to Ms SQL Server. I'm currently trying to import a database from LINUX using SQL+ (Oracle) to MS SQL Server. Any suggestions on how this could be achieved would be most helpful
I need to know how to write a sql statement for VB to Microsoft Access for the following criteria.
TblEmployees only Field to be concerned with is EmployeeID -Its PK TblEmpAttendane has these fields: EntryID - Pk EmployeeID - Fk Date- A text form date validated through vb to avoid hassle Value-A single digit value that can be alpha OR numeric
To get the Date range for the current month I use variables to store the First and last day of the month(in a CUSTOM calendar control).
I have been trying to use this Sql statement(that wont work): SqlString = "SELECT * FROM TblEmpAttendance WHERE Date BETWEEN '" & FirstDay & "' AND '" & LastDay & "'"
I need to: 1.)using the current EmployeeID (from TblEmployees) 2.) find the same EmployeeID in TblEmpAttendance 3.)Get the date range for the current month and year(valid days currnt mo.) -these date are supplied by the variables "FirstDay" AND "LastDay" as seen in above SqlString
4.) Find the Values associated with the dates and EmployeeID
I have a table with 10 records: 10, 9, 8, 7 ... and so on. I want to SELECT the top 3 records starting with the second record on the list (which in this case is 9.) So the result should be 9, 8, and 7. What would be the correct SQL statement for this?
I tried "SELECT TOP 3 * FROM tableXXX WHERE (FieldID<>(SELECT TOP 1 * FROM tableXXX ORDER BY FieldID DESC) ORDER BY FieldID DESC" but sure as heck it didn't work. Can anyone help?
just for understanding a simple iif statement: I like to set a numeric value to 0, if it is smaller than 0. This expression shall be valid over all dimensions for a specific measure
like Iif([Measures].[Provision Ankauf]<0,0,[Measures].[Provision Ankauf] )
it's not working, Pivottable returns ##VALUE everywhere
I have two problems. I am currently using SQL Server express and SQL Server Management Studio Express locally. i have a DotNetNuke website running on the web with IHostASP.Net
Story:
I noticed that my SQL Server 2005 database with IHostASP.net was 350MB. It was only 22 2 months ago and I have had about 100 users sign up. I then connected to my live database via SQL Server Management Studio Express and shrunk the database. No errors and the database was reduced to 24MB - Great I thought!
I went and checked the website and all was great for about an hour then the site went down with the following error:
Error The transaction log for database 'classcampers' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
Anyone know what to do.
Anyway, I have downloaded a .bak of my database as supplied by my host. However I cant figure out to restore this file back to my live database. What are the steps involved?
Do I create a new local database from the .bak and then somhow restore this back to my live one, or do i apply this .bak file strainght to my live database using SQLMSE. Any tutorials becuase I have been trying to apply this restore all day
Thansk for any advice in advance cheers Albertramsbottom:eek:
Hi, which is current running mostly used version of sql server and what was the previous version? how can we track down a query bad performance in sql server(like explain plan,stats..etc..in oracle)
Ive been learning SQL slowly and I need help for a projet I am doing.
I currently would like to compare identical files in a 2 seperate folder. Not only would I like to compare if the files are the same name, but when they are I would like to compare the file contents.
SO basically this is what I need to do: -Compare file names in folder A with files in folder B -If a match is found, compare file contents -If file contents are same, do nothing. If file contents are different, move file to folder C.
I finally decided to do our ASP application using VB, .NET and MSSQL.
My questions are simple, but I cannot find all the answers, so anything you can offer will be greatly appreciated.
Please explain how licenses (CALS) work with regard to Windows Server and MSSQL. For example, suppose we have 200 clients all logged into our application, but only say 40 are currently active (meaning they are adding data, running reports, etc....), but they are not all clicking the "DO" button at the same time. So how many Windows server and/or MSSQL seats, licenses, CALS, cpu's etc.... (whatever they are called) will I need?
How many users do you think a "well designed" ASP application built using AJAX, ActiveX, VB, .NET and MSSQL can a single cpu reasonably support? This application will serve east coast to west coast with heavy traffic from say 7am to 9am and 2pm to 4pm in each time zone. At what point (or what should I look for) to say, you need more memory, more processors, more servers, etc......????
How does one protect (or build in) a method to deal with index corruptions, etc???? Does that occur in MSSQL? If so, generally, what are causes and fixes?
The application will serve many chapters. Many chapters will be solo (by themselves), but we also expect district wide, where multiple chapters (25 to 75) in one district will use the application. We can expect, during time frames mentioned above, that each chapter will have 200 to 400 transactions per am time and same per pm time.
has anyone had great success with IronSpeed?
Lastly, can anyone suggest some good windows web hosting companies?
Hi i have 2 columns in the same table.....one column retrieves all registered students, the other column retrieved registered students but who have not completed a required survey.
The 2 sql statements are almost the same except that the 2nd one does another comparison at another table....(i.e. where student_id not in (select student_id from other_t).
I am trying to combine the 2 sql statements into a derived table where results will be displayed as follows:
registered students | students(incomplete surveys)
I have a database and in my database there are 5 different tables....
One of the tables is called "dvds" and another one is calles "reports"
What I want to do is, I would like to copy and paste everything in "reports" (column name: dvd) to "dvds" table (column name: name).
And I wan the SQL parameter to check everytime before it writes to "name" column in case that entry is already there. If the entry is already there then ignore and do not write, if it is not there then write it.
I am very sorry about my english and my knowledge on SQL.
Can anyone please help me to product this SQL command?
