I am new to SSIS....
I have a very simple package that has a flat file source object and an ole db destination object in the data flow. All works fine.
If I change a row in the flat file to make it fail how do I make the program continue and go to the next row?
The ole db destination does not have a Error Output properties like the flat file source does.
Thanks
I have been working on this import for days and I just can't figure this out. All I am trying to do is import a flat csv file into a new table using the default settings in the import tool and it just won't work! I have tried it hundreds of different ways, including saving the package and opening it in BIDS. I am new to SQL and SSIS... Errors are below.
- Executing (Error)
Messages
Error 0xc02020a1: Data Flow Task 1: Data conversion failed. The data conversion for column "Column 2" returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "output column "Column 2" (18)" failed because error code 0xC0209084 occurred, and the error row disposition on "output column "Column 2" (18)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure. (SQL Server Import and Export Wizard)
Error 0xc0202092: Data Flow Task 1: An error occurred while processing file "C:UsersTonyDocumentsHRAP20110506TCH.csv" on data row 1.
(SQL Server Import and Export Wizard)
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Source - AP20110506TCH_csv" (1) returned error code 0xC0202092. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure. (SQL Server Import and Export Wizard).
I have a flat file which have some record data ex.
id name team
1 "A"my" "Bl"ue"s"
2 "Bob" "Reds"
3 "Chuck" "Blues"
4 "Dick" "Blues"
in above example first record contain invalid data so complete flat file will not import due to one invalid row or record in flat file. so is there any way to check invalid row from flat file and ignore it(write log about invalid record) and process importing flat file.
I have a flat with few columns
FirstName, lastName, Address
f1,l1,a1
f2,l2,a2
I build my SSIS package based on the above file.But now i receive files with different columns order let say
lastName,FirstNamr,Address
l1,f1,a1
L2,f2,a2
or
Address,FirstName,LastName
a1,f1,l1
a2,f2,l2
every time i receive multiple files in different order and i have to remap all my mappings. These are just a few columns and i have like 20 columns and the order can potentially change any time. so every time i have build new packages remap them etc.
through normal c# code it pretty easy. I tried to add script here but the script also needs a source and mapping so there is also a mapping issue. Is there a better way to do this.
I'm working on SSIS to load the data from flat file to sql server, I'm getting date in below format, but in sql server I have given data type datetime. how to convert below format to 16-01-15 12.05.19.1234 AM.
View 4 Replies View RelatedI have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
View 5 Replies View RelatedNeed to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
@[User::Output_Path] + "Comms_File"+ @[User:: FileNumber] +"_" + replace((DT_WSTR, 10) (DT_DBDATE) GETDATE(),"-","")+ ".txt"
All this successfully creates these 4 files:
Comms_File_1_20150724.txt, Comms_File_2_20150724.txt, Comms_File_3_20150724.txt, Comms_File_4_20150724.txt
Now the QUESTION is how do I get these filenames as I need to insert them into a DB Audittable. The audit table looks like this:
CREATE TABLE dbo.MMMAudit
(
AuditID INT IDENTITY(1, 1) NOT NULL,
PackageName VARCHAR(100) NULL,
FileName VARCHAR(100) NULL,
LoadTime DATETIME NULL,
NumberofRecords INT NULL
)
To save the Filename & how many records in each file in our Audit Table, am using an Execute SQL Task and configuring it as this:
Execute SQL Task
Parameter mapping - Mapped the User Variable (RecordsInserted) and System Variable( PackageName) to Insert statement as shown below
SQLStatement: INSERT INTO [dbo].[MMMAudit] (
PackageName,NumerofRecords,LoadTime)
(?,?.GETDATE)
Again this all works terrific & populates the dbo.MMMAudit table as shown below BUT I also need to insert the respsctive file name – How do I do that?
AuditID PackageName FileName NumberOfRecords
1 MMM NULL 12
2 MMM NULL 23
3 MMM NULL 14
4 MMM NULL 1
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Nothing is wrong with package.
I will be receiving a CSV daily where columns within the file will change. The column order and number of columns can change daily. I need a way to read in the header from the csv and create a flat file connection that reflects the columns listed in the header.
Is there an easy way to do this using a script task? I have already read the header into a table but I have been unable to create the dynamic file connection.
I got a flat file like:
Location CurrencyRates
ALBERTA #15U.S.$ 0.2930 1 Can$ 0.0900
BRITISH COLUMBIA #14U.S.$ 0.6891 2 Can$ 0.2117
MANITOBA #18U.S.$ 0.4557 3 Can$ 0.1400
If there a way I can use SSIS to transfer this file to something like:
locationUSDUSDrateflagCADCADrateALBERTA #15U.S.$ 0.29301Can$ 0.0900BRITISH COLUMBIA #14U.S.$ 0.68912Can$ 0.0900MANITOBA #18U.S.$ 0.45573 Can$ 0.1400
I'm copying files to a folder with the naming convention as follows in the source folder:
CM_ABC_MY_TEST.txt
In the destination folder, this filename needs to appear as:
CM_XYZ_MY_TEST.txt
In my File System Task, I'm pretty sure I'm going to need an expression with a replace, substring, etc. But am having a hard time nailing down the exact syntax.
I have created a File System task which is contained in a Foreach Loop Container. I have .bak files that are populating a directory from a maintenance backup plan.
There is a point where I need to delete the .bak file's after I've zipped them all up.
How do I set the SourceVariable to read through the directory and pick up just the .bak file's in the directory to delete.
I am trying to create and later read a data file from a package deployed in SSISDB, but it is not reading it while it is successfully creating the file. The same package when run from the file system package, runs successfully. Generating ispac and deploying in SSISDB is running for infinite time. Is it a permission issue?
View 7 Replies View RelatedI need to get the record counts for all the flat files in a folder. All the flat files are having different format.
Can I get the record count using a single data flow task and for each loop container?
I am having difficulties loading data from a flat file to a SQL Database. I am able to load some data but the rest gets kicked out for the following reasons:
1 – The field is varchar 50 and I would like to convert it to a date field
2 – The field contain periods (.) (Only 1 period in each row)
3 – The field contain blanks (NULLS)
How do I create a derived column that will bypass blanks (Nulls) and remove periods (.) in each row then convert column to a date field in SSIS? Looking for steps to create a derived date column using SSIS (derived task); convert it to a date column (09-19-2015); use functions to redirect the nulls and possibly remove the period (.)?
[b][u]Sample Data[/u][/b]
Column 3 (Varchar 50) Need to convert to date; remove periods, and bypass nulls(blanks)
Blank
.
Blank
.
Blank
Blank
.
01-19-2015
01-19-2015
Blank
.
Blanlk
.
Blank
01-19-2015
.
Blank
.
Hi All,
I need to know how to create a AScii 7 bit flat file using Integration services. I do have basic charecters in the flat files - only other charecters required are a pipe (|), which is used as delimeter and additionally it will have line feed (LF) which is used as row delimeter.
Please let me know if this is possible.
-vinu
Can we disable a flat file connection manager in a ssis package just as how we can disable a OLE db task? When I try to disable the flat file by clicking on work offline its gets disabled which is what i expected , but when i close the package and reopen it again its again enabled , is this the way that a flat file connection manager works.
View 5 Replies View RelatedI am facing a problem i just want total no row count and it should be show in header .So how can i do in SSIS
Suppose
eg. HeaderName , 3
data1
data2
data3
FooterName,3
Hi All,
I am using MS SQL 2005 and using Integration Services I have created FTP task to create a txt file with the required information on to a FTP location. But I need the encoding of the file to be set to AScii 7 bit mode rather than unicode or Ansi-Latin I - which are 16 bit. I tried creating the file first in unicode first & then converting it Ascii, but this made me to loose some data from the generated file. Looks like this doesnt work out and my attempts generating AScii 7 bit flat file is failing. I need solution to URGENTLY otherwise I will have think of some alternative other than Integration services. Egarly waiting for any responses!!
-vinu
I am facing one process related issue.
I have one task in which i have to collect lots of .txt file having ## delimiter my requirement is to convert the delimiter from ## to comma and save the new file with .dat extension in different folder.
I have done all required process and run the application which should flow like collect source .txt file do Script component processing and create new .dat file with processed data in Data Flow task, but in my Task the Source and Destination start on same time and process start after words which cause empty file or some time a.txt file data stored in b.dat file where as a.dat file is completely empty.
The process should flow in sequence but behavior is totally against the process, i am using Foreach Loop Container for pick up each file.
URL....I'm having a problem with Integration Services Tutorials SSIS Tutorial: Creating a Simple ETL Package Lesson 2: Adding Looping (step 3).I can't add a variable to Sample Flat File Source Data.Right-clicking on the connection manager just shows two items of the property: File Name and File Path and nothing else.I am using MS Visual Studio Ultimate 2012. Does it have limitations? I've see screenshots where properties of flat file managers have many more options.
View 2 Replies View RelatedI have a doubt in file system deployment in ssis. I read msdn articles like "MsDtsSrvr.ini.xml" will decide the default folder for ssis packages those are deployed to "File System".
I have installed SQL server 2012 of 64 bit in my system. My "MsDtsSrvr.ini.xml" file was reside in the path"C:Program FilesMicrosoft SQL Server110DTSBinn". This means when we try to deploy my packages to File System default path should come like "C:Program FilesMicrosoft SQL Server110DTSPackages".
But in my case path was coming like "C:Program Files (x86)Microsoft SQL Server100DTSPackages" even though my "MsDtsSrvr.ini.xml" reside in "C:Program FilesMicrosoft SQL Server110DTSBinn". i can't able to see my packages in SSMS when i connected to integration services.
I have a requirement wherein I have to setup the flat file connection manager to accept columns on fly. Meaning I want to retrieve list of columns/column count from the database when the package is run and set the connection manager with those many columns.
View 6 Replies View RelatedI set up a connection file in order to move data from sql to csv files. I should be at the last step, the data flow. but:I don't see any flat file in my destination assistant.
View 23 Replies View RelatedI am using the below code in my command prompt and it is copying all the records from a particular table and dropping in Flat file format in particular folder location. The below code is working if I am pointing to my local database but if I need to point to different database outside my environment how should I set it here also including the case where User ID and password are required to access the db.bcp AdventureWorks.HumanResources.Department out C:myDepartment_c_t.txt -c -t, -r -T -S.
View 12 Replies View Relatedwhat the meaning of the TextQualified attribute on a flat file connection is? I am importing delimited flat files where text columns are not qualified by quotes. If I use the Suggest Types button in the Flat File Connection Manager Editor, it sets TextQualified to True for all columns. Importing works fine than, but it also does with TextQualified = False.
View 3 Replies View RelatedIf I can select an input flat file via a dialog box, or it is necessary to either hardcode the file name or change the filename everytime to a similar format; &How can a query be run and processed in SQL right after input of a flat file to continue?
View 3 Replies View RelatedI am attempting to get this script provided by Microsoft to work to no avail. Specifically, when I set the variable FFNonDataRows to 1 (in order to accommodate for the header row), the variable is not being set to False as expected. I don't know enough about C# to understand why this script isn't working. How to get this script to work in this manner?
[URL] ....
I have one requirements below..
Table input
Eno ename Eloc
Edept
1 Sid
Pune 101,201,301,401,501,601
Output:
Eno ename Eloc
Edept
1 Sid
Pune 101
1 Sid
Pune 201
1 Sid
Pune 301
1 Sid
Pune 401
1 Sid
Pune 501
1 Sid
Pune 601
I have a requirement where I have to take all the data available from a sql table and write it out as a flat file in folder location.Its a simple table have 8-10 coloumns, have to take this data on daily basis from sql table and deliver out as flat file in a folder.
View 19 Replies View RelatedI have a SSIS job which takes a SQL Server view as its source and outputs a flat file. The file is quite large, about 20000 rows of 30 columns and up to 400 characters per row. It is configured with CRLF at the end of each line, tabs between columns, and no header row. Most rows are output with no problems, but occasionally a line will include a line break (CRLF) in the middle. The problem appears random, but the rows with spurious CRLFs appear in clusters, with each row in the cluster having a line break after the same column. To illustrate, it looks something like this:
col1 col2 ... col 30
col1 col2 ... col 30
col1 col2 ... col 24 CRLF
col25 col 26 ... col 30
col1 col2 ... col 24 CRLF
col25 col 26 ... col 30
col1 col2 ... col 30
col1 col2 ... col 30
So although there is some pattern, where a group of lines will include a break in the same place, I've not been able to identify the pattern and relate it back to the data items.
What could possibly cause CRLFs to spontaneously appear midway through the row?
Public Class ScriptMain
Inherits UserComponent
Dim smpid As String
Dim Prdt As String
Dim rcnt As Int64
[code]...
Using the Vb script above I am expecting to read the first row from a flat file source and transferring the data into two variable using script component.
SQL server 2008.
Script task Custom Properties:
Script Task Input Columns:
I get the following errors one after the other:"The collection of variables locked for read and write access is not available outside of PostExecute." "Object reference not set to an instance of an object."
I have a Data Flow Task within a ForEach loop container. The source of the flow is ADO.NET connection and the destination is a Flat File Connection. I loop through a collection of strings in the ForEach loop. Based on the string content, I write some data to the same destination file in each iteration overwriting the previous version. I am running into following Errors:
[Flat File Destination [38]] Warning: The process cannot access the file because it is being used by another process.
[Flat File Destination [38]] Error: Cannot open the datafile "Example.csv".
[SSIS.Pipeline] Error: Flat File Destination failed the pre-execute phase and returned error code 0xC020200E.
I know what's happening but I don't know how to fix it. The first time through the ForEach loop, the destination file is updated. The second time is when this error pops up. I think it's because the first iteration is not closing the destination file. How do I force a close of the file within Data Flow task or through a subsequent Script Task.This works within a SQL 2008 package on one server but not within SQL 2012 package on a different server.