Hi,
I cannot execute a script task in the VBA code window.
I cannot debug or log if I run a single script task from the right click Execute Task .
Every time I have to run the entire package in order to be able to debug.
What am I missing?
appreciate a help.
Gulden
I am having the same problems as those in another post. SSIS package works fine when executed in BIDS and through execute package utility but it doesnt work when executed as a step in a job.
The other problem is that the logging also doesnt work when i try executing it as a job. So I have no clue about what to do without knowing what error it is. When I run the job it simply says the step has failed.
I have tried most of the solutions posted in other websites most of them to do with using proxies with credentials but havent hit a solution. I would love to get any input on what to do.
Thanks
I'm evaluating SQL 2005 Everywhere Edition for use by our desktop application. I'm a traditional SQL Server developer and I rely heavily on stored-procedures to encapsulate basic data manipulations across multiple tables and inside multi-statement transactions.
I was excited to see an in-process version of SQL released and my thought was "this is great... now I can ditch the tediousness of individual OLEDB/.NET commands, and write batches of T-SQL and just focus on the data manipulations". But, alas, it seems I cannot. Why is SQL Everywhere Edition limited to executing a single SQL statement at a time?
For example, my application would like to update mutlipe rows in one table, delete multiple rows from another, and insert multiple rows into a third. I can do that with 3 T-SQL statements in a single small batch in a very readable way with full blown SQL Server. (and I can put that batch in a stored procedure and re-use it efficiently later.) If I contemplate how to do that with OLEDB and the single statement limitation of SQL Everywhere, it's a lot more code and a lot less appealing/maintainable. I want as much of my app to be using declarative code and as little as possible tied up in tedious OLEDB calls. Is this not possible with SQL Everywhere Edition?
I have the failed path of many tasks pointing to a single Script Task that logs a failed entry into my database. In this script task, I need to be able to determine the task that faliled as I need to write a unique error message depending on the task that failed.
In my VB script, how would I determine which task was the one that failed?
Thank You!!!
a SSIS newbie
I have modified my workflow to take conditional branch. The workflow terminates after the branched tasks finish without continueing to the next task no matter how I set the flow out condition. I found I have this problem when a task take more than one input. Does SSIS has a seeting for limiting the inputs to be taken?
Thanks in advance for the help!
Hi,
I'm trying to debug a Script Task. I set a breakpoint then start debug. I always get a COM Exception error:
unhandled exception occurred in DTAttach.exe[3332]
File position not valid for new breakpoint
Can someone suggest me something?
Thanks
I have the following scenario:
-I have a package that uses checkpoints
-The first task in that package (an Exec SQL Task) retrieves a timestamp value from an external source
-That timestamp value is used in data-flows to pull data that has been changed since then
-At the end of the package the value in the db is updated
Now...if something fails then on the next execution the checkpoint file will kick in. But this means that the first task (which retrieves the timestamp) will not execute and therefore all the data-flows will be pulling the wrong data.
The only way I can think of getting around this problem is to specify that a task should execute regardless of the presence of a checkpoint file. Unfortunately it seems this cannot be done.
Another option might be to put an OnPreExecute task on the package that gets the timestamp value.
Anyone got any advice about how I should progress? Short of a suggestion from elsewhere I'm going to go with the tactic of using the OnPreExecute to retrieve the timestamp.
Thanks in advance.
-Jamie
First off, we are talking about a script task and not a script component. I have a task flow that has numerous script tasks. One of these is a script task within a foreach loop container. Prior to this foreach loop container there are two other script tasks. I put my breakpoints in the script task in the foreach loop. When I run DEBUG, some weird things happen:
1. The code breaks at one of the script tasks, prior to the one I entered the breakpoint in.
2. there are no breakpoints that I entered in the script task that the code breaks on.
3. The code does not break in the script task I want it to break in (the one in the foreach loop container).
I've checked the forum and couldn't find out what I need to do to get this to work correctly.
Can someone please shed some light on this problem.
Thanks,
Lee
I am getting an while trying to run the script task in debug mode in SSIS package.
"SQL Server Integration Services Script Task has encountered a problem and needs to close. We are sorry for the inconvenience."
Any idea why i am getting this error.
Thanks,
How to debug a Script Component task?
For instance, I€™ve got a Input0_ProcessInputRow procedure and I€™d like to see what happen when compiler reach this line:
dFecha = Left(Row.Column19, 4) & "-" & Mid(Row.Column19, 5, 2) & "-" & Right(Row.Column19, 2)
I€™ve put a toogle breakpoint there and then saved but when I run the package to ignore at all.
This topic has been already discussed in these newsgrups but I still have doubts.
Thanks a lot for any advice or clarification
I'm getting the error Visual Studio has encountered a problem and needs to close. When sending the error report to Microsoft no resolution comes up but another message like:
Microsoft Visual Studio for Applications has lost the link to .
Your work will be exported to C:Documents and Settings.... when you quit the application
Any hints on what I can try?
Thanks in advance, Michael.
Hi all,
I have a simple question: is it possible to use Edit and Continue feature when debugging a script task in VSA?
It seems to me that after breaking the execution of the script task and adding some code in break mode, whole edit disappears after leaving VSA environment.
I have enjoyed the Edit and Continue feature when developing in VBA, so I am wondering if it is available in VSA.
Thank you very much for the answer!
Marek Stefanek
I have a DTS package that I brought over from SQL server 2000 in to SQL Server 2005. I have installed all of the legacy components to run the DTS packages but I need to debug an ActiveX script task. In SQL Server 2000 I could turn on Just-In-Time debugging and use the stop operator (in my vbscript) to break the running script and launch the debugger.
I don't see how to do this in SQL Server 2005 Management Studio. Is it possible to debug a script object in a DTS package running in SQL Server 2005?
Jay Abbott
I seem to be doing something wrong I have a script task as follows:
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
Public Sub Main()
Dim emptyBytes(0) As Byte
Dts.Log("The change in records between this load and the last load is " & CDbl(Dts.Variables("percent").Value) * 100 & "%.", 0, emptyBytes)
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
I have logging turned on for the package going to a text file with just errors checked. For this step I specifically checked the box for logging on this step (instead of inheriting logging) checked the logging provider, and on details checked ScriptTaskLogEntry.
The upshot is, the step runs fine but I have no entry in the log. HELP
Thanks,
LarryC
I am trying to understand the use-case of Dts.Logging.Log.
Following BOL, I see that I can use Dts.Log to send a custom log message to my log provider. The following example code produces an event called "User:ScriptTaskLogEntry", with the message "My custom message here".
Dim dataBytes(0) As Byte
Dts.Log("My custom message here", 0, dataBytes)
I would like to be able to produce my own custom event (lets call it "MyCustomEvent"), as well as a custom log message. I thought it would be possible via Dts.Logging.Log, which requires that I specify an event name, in addition to a log entry. However, when I place the following code in the script task, I do not get any logging whatsoever.
Dim dataBytes(0) As Byte
Dts.Logging.Log("MyCustomEvent", System.Environment.MachineName, System.Environment.UserName, "Custom Log", "", "", "My custom message here", Now, Now, 0, dataBytes)
Any thoughts?
Thanks!
Hallo All,I'm making in my DB some logs.I have a separate table containing:ID,Date,Source,Type,ErrorNo,DescriptionAcctualy the table struct is not immportand that's why I do not postthe script.I have one procedure, which I call in my other function procedures,triggers etc. with parameters.This procedure (WriteToLog) is called, if in other procedures, triggersis any validation, exception or only information which I would like tolog me separately, and it writes the record into this table.But sometimes, it is very hard, to follow much logs, and I figured out,if I could have something like transaction ID, task ID, it will be mucheasier.Firs idea was to, by going from procedures to other procedures, pass aself generated token (ie. date with any additional number). But then, Ineed to change everywhere where I call WriteToLog procedure the callsyntax.Let's say that we have following situation:Procedure1:Action1Select1CompareOfValues1exec WriteToLogAction2CompareOfValues2exec WriteToLogAction3exec Procedure2Procedure2:Action1exec WriteToLogSelect1Insert1Trigger1Started:Action1CompareOfValues1exec WriteToLogAction2Trigger1Exit:Procedure2Exit:Procedure1Exit:Now ... I could pass this my generated number, from SP to SP and so on.But I would like to now, does the MS SQL server has something whatidentifies transaction like descripted below.In this case, I do not need to pass any number, only I need to get thisnumber anyhow in SP WriteToLog, and insert it into my log table.Any sugestions?Thank's in advance.Mateusz
View 3 Replies View RelatedThe ExecuteSQL task makes it easy to capture the resultset of a query or stored proc in a variable. But what about the messages that would normally appear in the Messages tab when running queries in Management Studio or Query Analyzer? There must be a way to display and log rowcounts and other messages that a query normally produces.
Various package/task logging configrations haven't helped. I've read discussions about logging rowcounts in data flow tasks, but what about capturing messages in ExecuteSQL and other control flow tasks that run T-SQL?
I only have enough time to dabble in this technology so I may be missing something obvious or approaching this incorrectly. Any suggestion, reference, constructive criticism or reponse would be appreciated.
All,
I 'm using 'Analysis Services Processing Task' as part of a SSIS package to refresh the cube. in the property page,
the 'loggingMode' is set 'enabled', but there is no records in the sysdtslog90 table while all other tasks are logged in the table. How to logging into the sysdtslog90 table?
Thanks in advance
Jessie
I'm having a hard time to getting back an xml data back from a stored procedure executed by an Execute SQL task.
I'm passing in an XML data as a parameter and getting back resulting XML data as a parameter. The Execute SQL task is using ADO connection to do this job. The two parameters(in/out) are type of "string" and mapped as string.
When I execute the task, I get the following error message.
[Execute SQL Task] Error: Executing the query "dbo.PromissorPLEDataUpload" failed with the following error: "The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 2 ("@LogXML"): Data type 0xE7 has an invalid data length or metadata length.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
I also tried mapping the parameter as XML type, but that didn't work either.
If anyone knows what's going on or how to fix this problem please let me know. All I want to do is save returning XML data in the parameter to a local package variable.
Thanks
I have an Analysis Services Processing Task in my SSIS package. I run the SSIS package using SQL Server job, the running of the package is a job step.
When I process manually the analysis services objects (in practise cubes) using dtexec utility I get a lot of log. In case the processing fails I get error messages that quite well describe the error. But when I run the job the only information I get in the job log is that the job step failed. I know the failure happens in the Analysis Services Processing Task.
Is there any way in SSIS to get a) the log of the Analysis Services processing or b) the error messages of the Analysis Services processing? Or should the processing be done some other way than I've been doing?
Hi,
I have found that when I'm debugging a custom component in BIDS that I've created in another instance of Visual Studio, every time I rebuild the component I have to shutdown and restart BIDS and then reattach to the BIDS process. Which is pretty time consuming... And if I find a small error in my custom component when debugging then I don't seem to be allowed to make any changes to the code unless I stop debugging and go through the process above.
Am I missing something here? Or do I really have to manually go through these steps every time I want to change code in the component I'm debugging?
Can I automate the process with MSBuild or NAnt? If so, is there an example of this anywhere?
Thanks in advance,
Lawrie.
I created DTS a while ago and placed in job to run once a day (it worked fine for 3 months)
2 days ago I changed sa password and now job fails with error (Login failed for user 'sa'.), but it run fine from DTS !!!
1. My DTS created with domain Account DomainSVCSQL2000( sa rights and local admin)
2. SVCSQL service use DomainSVCSQL2000 to run
3. SVCSQL agent use DomainSVCSQL2000 to run
4. DTS use 'osql -E
Where should look for reference to sa ?
Executed as user: MONTREALsvcsql2000. DTSRun: Loading... Error: -2147217843 (80040E4D); Provider Error: 18456 (4818) Error string: Login failed for user 'sa'. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0. Process Exit Code 1. The step failed.
Have an SSIS package running great in 2008R2. It generates several flat files based on inline database queries. The first step of the package inserts a record into a log stats table and the last step of the package updates this record with the package name, run time and execution status. Now I need to add the records counts for each flat file to the log table.Â
Is there a way I can update one field for run counts with each of the counts for each file. So the [run counts] table column would look something like:
file1: 43522
file2: 645367
file3: 7883
Is it possible to store the record counts and flat file names in variables then concat them at the end when updating this record?
Or, is a better way to just insert/update a new record for each flat file step and log the counts for that file for its own record?
In either case, how I can capture the file count and pass that to the update statement.
Just wonder whether is there any indicator or system parameters that can indicate whether stored procedure A is executed inside query analyzer or executed inside application itself so that if execution is done inside query analyzer then i can block it from being executed/retrieve sensitive data from it?
What i'm want to do is to block someone executing stored procedure using query analyzer and retrieve its sensitive results.
Stored procedure A has been granted execution for public user but inside application, it will prompt access denied message if particular user has no rights to use system although knew public user name and password. Because there is second layer of user validation inside system application.
However inside query analyzer, there is no way control execution of stored procedure A it as user knew the public user name and password.
Looking forward for replies from expert here. Thanks in advance.
Note: Hope my explaination here clearly describe my current problems.
I have about 100 different tables that I would like to bring on nightly basis via integration services. SSIS will process the data and send on to its warehouse destination.
Is it possible to use a single task to bring in all these tables from within SSIS? and can write failed records to flat files at the sametime? instead of defining a data flow for each table and dealing with hundreds of dataflows just have one task that loop through the list of tables.
Wonder how warehouses fed by 100s of tables deal with this kind of scenario?
I have a table with email addresses and CC_Flag.
Email    | CC_Flag
xxxx          0
yyyy          1
zzzz          1
Using Task SQL, I am trying to pass these email addresses to two separate variables - To_field, Cc_field on basis of the CC_Flag..Is it possible to fill two variables from a single SQl Task,.
Greetings,
I am developing a package on my local workstation. I have defined two logging service providers. One is for SQL Server and the other is for the Windows Event Log. I am using the Dts.Log method in a script task to write log entries.
Logging is working properly with the SQL Server provider and rows are being inserted into the sysdtslog90 table. However, the only events that are being logged in the Windows Event Log are the package start and end events which I believe SSIS is doing automatically anyway.
Is there something I need to do to enable WIndows Event Log logging other than defining a log provider and making sure it is checked active? Won't SSIS write to two different logs with one Dts.Log call? Any ideas on what might be going wrong with my approach?
Thanks,
BCB
Hi
I've created a simple package that contains only one task that is an execute sql task. When I run only this single task from Business Intelligence development studio it runs successfully. But when I run the whole package (also from Business intlligence studio), the package fails.
The data source I access is ODBC. I'm sure the real reason for the error is the bad ODBC driver of the data source but this can't be changed. So I need to know what is different from running only a task in a package to running the whole package. If I knew that I might be able to adjust some setting and make it work.
Any help welcome.
hi frnds,
im very new to SSIS package .my package consists of Single Exceute task.
In Single Exceute SQL task i had 3 seperate queries to get the count of rows of 3 tables.
the Query goes like dis ...
select count(*) AS precheckcount1 from new_main_dts where cust_nbr like '875%'
like dis for another 2 tables i had written with the alias name precheckcount2 and 3
i mapped the variable user::precheckcount1 to precheckcount1 in the resultSet and for other two alias name i did the same.
while executing the package the error is thrown : [Execute SQL Task] Error: An error occurred while assigning a value to variable "precheckcount2": "Unable to find column precheckcount2 in the result set.".
please help me its very urgent
I created a simple SQL Task in SSIS.
Connection is ADO.Net
SQL Statement is SELECT 10 AS NumberVar
ResultSet is set to single row
But when executing task I always get error message:
[Task 'SQL ausführen'] Fehler: Die zurückgegebene Anzahl von Ergebnisbindungen ist für 'ResultSetType' ungültig: 'ResultSetType_SingleRow'.
In English something like returned number of bindings is not valid.
Hi,
I decided to use the SQL Server log provider to store logging data of all my Integration Services packages. I also created some reports about this data for operating purposes.
I have a problem occurs the name of the executing package is not always written to the log,but the name of the single task which failed. But that is not very useful information for operating, because I do not see any chance to get the name of the package by the information which is logged in the sysdtslog90 table in the database which I defined for SSIS Logging.
How do I configure the package to always log the package information into the table, too?
Best regards,
Stefoon
Hi:
I have a data flow task in which there is a OLEDB source, derived column item, and a oledb destination. My source is a SQL command, that returns some values. I have some values, that I define in the derived columns, and set default values under the expression column. My question is, I also have some destination columns which in my OLEDB destination need another SQL command. How would I do that? Can I attach two or more OLEDB sources to one destination? How would I accomplish that? Thanks
MA2005
I set up a connection to mysql using ADO.NET's ODBC Data Provider. And I'm running a simple query to return one table's maximum ID(int32 unsigned). There is no problem to achieve that.
But when I bind the result to a variable and excute task. It gives out error message: "An error occurred while assigning a value to variable "MaxAuditLogID": "Result binding by name "MaxID" is not supported for this connection type. "
I tried to change the type of variable around but with no luck.
Could anyone help with this issue? Thanks!