No Local Instance With SQLServer2005 Dev. Ed.

Oct 20, 2006

(New to SQL Server Installs)

I installed SQL Server 2005 Developer Edition on a WinXP-SP2
workstation and can see some enterprise databases on the network just
fine.

My problem is I cannot register a local database on the local drive for
testing/education purposes.
(I accepted all of the defaults on the install and thought all was
well.)

There are a couple of small databases that are in development in our
group and I need to work on when offline from the network.

Short of uninstalling the whole product and doing it over, what steps
can I take to remedy this so I will be able to work with DB's locally?

Thanks.

View 3 Replies


ADVERTISEMENT

SQL Server Admin 2014 :: Cannot Connect To Named Instance (2nd Instance) From Local SSMS

Jul 22, 2015

I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.

View 5 Replies View Related

Failed To Generate A User Instance Of SQL Server Due To Failure In Retrieving The User's Local Application Data Path. Please Make Sure The User Has A Local User Profile On The Computer. The Connection Will Be Closed

Dec 7, 2006

This is my first time to deploy an asp.net2 web site. Everything is working fine on my local computer but when i published the web site on a remote computer i get the error "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed" (only in pages that try to access the database)
Help pleaseee

View 3 Replies View Related

How To Connect Domain SQLSERVER2005 To WORKGROUP SQLSERVER2005

May 12, 2007

hi



COMPUTER-1



IP ::::: 129.100.100.5

COMPUTER NAME IS ::::: HASH

MEMBER OF DOMAIN

in this computer sqlserver express edition is installed, i want to remove this express becoz in configuration manager it show two SQLSERVER'S are running. when i browse from COMPUTER - 2 for network servers it show server name as HASH/SQLEXPRESS, but not the main SQLSERVER.





COMPUTER -2



IP::::129.100.100.142

COMPUTER NAME::: FEROZ

MEMBER OF WORKGROUP



can anyone help me how to connect these two computers and remove this express edition



iam new to sqlserver configuration



thanks in advance



waiting for eager reply

View 1 Replies View Related

Instance Name As Local Server ?

Oct 10, 2002

I have a SQL2K server installed , and it is given an instance name (like BoxSQLInstance). I have a connect string looking for "local" server, is it possible to make this instance name as the default local server ?

View 1 Replies View Related

Local DB - No Option To Set Instance ID

Sep 30, 2015

I am working on an existing project that uses sql server 2014 local db. I've installed it (there was no option to set an instance id). Using sql server 20014 management studio and setting the server name to (localdb) results in this error

Network related or instance specific error occurred while establishing a connection to sql server.......

So obviously its not there, how can i test this? There's no service I can see. The installation procedure completed without any errors, what could be going on here ?

View 2 Replies View Related

Cannot Connect To Local Instance

Jan 29, 2008

I have just recently installed MS SQL Server 2005 Developer edition. I have installed SP2.

Today when I try to connect via Management Studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)

I installed it as a default instance.

I recently added a login with dbo privileges. I have tried logging in with that sql account and also with windows authentication to no avail.

Thank you for any help.

View 2 Replies View Related

Can't Route To Another LOCAL Broker Instance

Feb 17, 2006

I have two databases (A and B )on the same SQL Server instance. Both have SSB enabled and running fine within themselves. All athorizations are at present set to dbo.

Recently I had a requirement to start a dialog and send a message from within data base A to a queue via a service that is in database B.

I tried coding the SSB instance in the BEGIN DIALOG then I set up a route and tried that. On both occoasions I got the following on sys.transmission_queue

"An exception occurred while enqueueing a message in the target queue. Error: 916, State: 3. The server principal "sa" is not able to access the database "B" under the current security context."

Is this sometjhing to do with security lock downs in 2005?

View 16 Replies View Related

SQL Security :: Cannot Connect To Local Instance

Sep 25, 2015

I have verified that the following services ARE running.SQL Server (SQLEXPRESS)SQL Server Browser SQL Server VSS Writer.This one however will not start ... For some reason it starts then automatically turns off.SQL Server Agent (SQLEXPRESS).When I try to connect using my <machine name>/instance  and Windows Authentication I get the following error ...

"A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server)".The connection specified in the "Connect to Server" box was working perfectly fine before I upgraded. I thought it might have been my Norton 360 Premier but I uninstalled it.I AM having issues with the adapter frequently dropping the internet connection but I just disconnect and reconnect and that resolves itself.The other technique I tried was to replace the server name with the IP address ... <192.168.0.22>/Instance ... This actually seemed to find the SQL Server but rejected the Windows Authentication ...

"Login failed. The login is from an untrusted domain and cannot be used with Windows authentication." I have several databases on here and would hate to have to reinstall SQL Server and manually hook them back up.

View 6 Replies View Related

Can't Access Instance Of Local Webserver

Sep 2, 2006

Hi, I've installed SQL Server 2005 Express Edition, SQL Server Management Studio Express using Windows Authentification and IIS 5. The problem occurs when I try to access the default address of my local computer to test my installation. I've tried with both http://localhost and http://127.0.0.1. The system requires a password despite I don't use password for my Windows Authentification. Does IIS always demands a password regardless my settings for Windows Authentification or?

Best regards

View 4 Replies View Related

Can I Connect To SQLExpress Instance Using (local)

Feb 19, 2007

Hello,

I am using the following connection string to connect to SQL Server 2005 Express Edition installed on my local PC.
string sqlstr = "Server=(local);Database=MyDB;User ID=sa;Password=sa;Trusted_Connection=False";

And it gives me the following error. The string works fine in computer with SQL Server 2000 instance but fails with 2005. The string also fails for "Server = localhost".
However the string works very fine if I use the name of Server 2005 i.e ./SQLExpress

===================================

Cannot connect to (local).

===================================

An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)

------------------------------
Error Number: 2
Severity: 20
State: 0


------------------------------

 

Now the main problem is that, of course I could use a named instance, but since I am embedding the Connection String in a dll file so that any user can use it to connect it to the local instance of the SQL Server 2005 installed in his/her computer, I need to use "server = localhost". Doesn't SQL 2005 support this. If yes, where could i find option to enable it?

I have enabled every option available in surface area configuration for SQL Server 2005, but nothing seems to help out. I even use local as well as remote connections using both TCP/IP and named pipes.
Can nyone help me out?

View 8 Replies View Related

Can't Connect To Local User Instance

Feb 6, 2007

Just when I think I have this stuff figured out, it bites me back everytime.

I'm
trying to deploy an mdf out to a different machine, and attached to it with local user instance. I connect without problem from my development
machine with a local user instance, which also has Express Manager resident,
and I can connect to a server instance without problem.

What I can't do is
copy the .mdf database over to another workstation, which has Sql Native
Client installed, and connect to the database using a local user
instance! I can connect to a server instance without problem from this
other workstation. Here's my connect string for local user instance
that works fine from my dev machine:

Provider=SQLNCLI.1;Persist
Security Info=False;Integrated Security=SSPI;Data
Source=.sqlexpress;AttachDBFileName=<full path_name and mdf
filename>;User Instance=true;

The error I get upon trying to connect with other stations is:

Error -2147467259
Database not found or cound not connect to database

I've
tried this every way I know how. I've copied the database from my dev
machine both with and without having detached the database from the
local instance. I've tried detaching from a server instance and copying
the file over. Nothing works, and I've done this before! What gives with this thing?

Rick

View 5 Replies View Related

SqlDataSourceEnumerator Not Finding The Local Named Instance?

Jun 19, 2007

We are seeing some very strange behavior on installation for our application when it is trying to enumerate the available SQL Server instances. On some machines (not yet determined why) the SQL Browser service is apparently able to locate remote instances but not the local instance. This does not seem to map to any firewall or TCP/IP settings which we can determine. We have gone to the extent of uninstalling all associated firewall and antivirus products, and the problem persists.



For the moment, we are working around this problem by interrogating the registry for the instances installed locally, but this seems unsatisfactory in the long run. Is there any possibility that other instances of SQL Server Express or MSDE have somehow disabled our ability to see local instances? I would really like to find a better solution to this problem.



Andrew Raymond, MCAD.NET

Senior Developer

Mitchell 1

View 2 Replies View Related

Connecting To A Local Instance From A Remote Computer

Sep 18, 2007

Greetings friends,

Not sure if this is the right place for my question but here goes anyway.

I have an instance of SQL Server 2005 installed on my DEV PC. A colleague of mine wants to access my server from his machine which connected to the same network.

I logged on to SSMS and added him as a new login.

Will he be able to connect to it now or do I have to do more than just that?

Your help would be appreciated.

View 6 Replies View Related

DB Connection From File Vs Local SQLServer Instance

Feb 12, 2007

I want to add a data source to a C# project that comes from a local SQLServer instance. But when I attempt to do a new connection, it only allows me to specify a file. That is, the only choices I have to select a data source type are "Access DB file" and "SQL Server DB file". I know that with the non-express VS edition there are more choices available. But reviewing limitations of express editions on the web, I find a frequent mention that one cannot access remote data, only a locally installed data source. But is not a SQL Server instance on my local machine a local data source?

This is an issue because if I proceed with connecting as a file, then VC#Express complains the file is in use. If I first go into SqlServer Expresss and detach the database there, then I can connect to it in VC#Express, but that is rather cumbersome!

So to put it another way, can I use this connection string...

Data Source=.SQLEXPRESS;Initial Catalog=testDB;Integrated Security=True

instead of this one?

Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory| estDB.mdf;Integrated Security=True;Connect Timeout=30;User Instance=True

View 6 Replies View Related

What Does The Following User Instance Limitation Mean Only Local Connections Are Allowed

Mar 17, 2008

 I have been reading through the article pointed to by the link below on msdn and its documented that one functional limitation of user instances is "Only local connections are allowed." I didn't understand the technical details(meaning) of that limitation and hopefully some one might explain it to me so that i can understand it better. 

View 6 Replies View Related

Installed Quick Start On Local Computer - Need New SQL Instance

Sep 15, 2005

Hello, PLEASE Help me.I have just installed the Quick Starts on my local machine, and it mentions that you will need a new instance of SQL called (local)/NetSDK.I already have the MS Personal Edition and the tutorials say to download the MS Desktop Engine. So what do i need to do in order to get teh Quick Start samples to work locally???Can i not just use my own instance and use the Grocer and other Databases there???Please Help

View 1 Replies View Related

Selecting Version Of Remote SQL Instance Into Local Variable?

Feb 28, 2007

Hello all,
I'm a bit new to SQL Server and T-SQL (my background is in DB2), so hoping you can help me with this. I'm writing a T-SQL script that's hopefully going to scan a bunch of SQL server instances and record the results. We've got a mix of SQL2K and SQL2K5 instances, and for part of my script I only want to run something if the remote instance is SQL2K.

I'd tested this on my local PC with several instances created and it worked fine. When I try and run it for instances located on other servers it barfs :eek: . From what I've found from looking up the error message it looks like I've got myself a loopback -- but I don't know how to get around it - any ideas please?


DECLARE @tempdata TABLE (scratch sql_variant)
DECLARE @debug tinyint
DECLARE @server sysname
DECLARE @version varchar(20)

SET @debug=1
SET @server='SQLSERVER_INSTANCE'

INSERT INTO @tempdata (scratch) EXEC ('[' + @server + '].master.dbo.sp_executesql N''SELECT SERVERPROPERTY(''''ProductVersion'''')''')
SELECT @version = convert(varchar(100),scratch) from @tempdata
DELETE FROM @tempdata
IF @debug>0 BEGIN PRINT @server + ' is running SQL Server version: ' + @VERSION END
IF charindex('8.00',@version) > 0 BEGIN
PRINT 'SQL2K-only code goes here'
END


The error I get is:
OLE DB provider "SQLNCLI" for linked server "SQLSERVER_INSTANCE" returned message "The transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Line 1
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "SQLSERVER_INSTANCE" was unable to begin a distributed transaction.


I get this error running from a SQL2K5 instance against both SQL2K or SQL2K5

TIA, moff.

View 3 Replies View Related

SQL 2012 :: Connecting To Local Server Instance From Access

Aug 4, 2014

First time I've tried doing this - I have SQL Server 2012 installed on my local machine with an instance running (which was set up under an administrator account, not mine, which has no admin rights), and I'm trying to create a linked table from Access (also on the local machine) to a table on the server.

I tried creating a DSN using Windows Authentication, using the server name which is the same as my computer name, and got the error "Error 18452, Login failed. The login is from an untrusted domain and cannot be used with Windows authentication".

I then created a SQL authentication user ID and password, and tried the same thing using that instead, and got "Login failed for user <myusername>"

Is there some particular setting on the local instance I need to change to allow this kind of connection, or do I need to use something other than the server name to connect, such as an IP address? Remember that I have no admin access on this machine so any solution would have to avoid requiring that.

View 3 Replies View Related

DB Engine :: Cannot Connect To Named Instance From Local SSMS

Jul 22, 2015

I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.

View 4 Replies View Related

Login Failed When Trying To Connect To Local Instance Of SQL 2005 DB

Jan 2, 2008

I installed SQL 2005 Developer addition on my Vista laptop. When I open Management Studio to connect to the local instance of the DB, I get the error below. Why can't I access? Is there something with Vista that is prohibiting?

Thanks


TITLE: Microsoft SQL Server Management Studio
------------------------------

Login failed for user 'xxxx'. (Microsoft SQL Server, Error: 18456)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=18456&LinkId=20476

------------------------------
BUTTONS:

OK
------------------------------

View 1 Replies View Related

EnumAvailableSqlServers() Fails To Detect Local Sql Server Instance

Mar 15, 2008

I am using SMO EnumAvailableSqlServer to make a list of available SQL servers in local network. I have tested it in two different local networks. In the first all works fine, but in the second I have noticed that when disconnected from the network the call fails to even detect the locally installed sql servers.
I know that I can scan registry to get installed local servers, but I want to know what could be making problem.

View 3 Replies View Related

Detach Database File From Local SQL Server Express Instance By C#?

Jan 30, 2008

I am using the following C# code to establish a SQL connect to a SQL database file:

// connection string
// attach a SQL database file to a local SQL server express instance
string _connectionString = @"Server=.SQLExpress; AttachDbFilename=C:BalanceDatabase_1.mdf; Trusted_Connection=Yes; User Instance=True";

// using System.Data.SqlClient;
SqlConnection _sqlConnection = new SqlConnection(_connectionString);
// open the connection
_sqlConnection.Open();

// do something

// close the connection
_sqlConnection.Close();

So far, the connection works fine.

However, next, I want to copy the database file to another folder. So the following codes:
// source database file name
string sourceDatabaseFileName = @"C:BalanceDatabase_1.mdf";
// target database file name
string targetDatabaseFileName = @"D:BalanceDatabase_1.mdf";
// copy database file
System.IO.File.Copy(sourceDatabaseFileName, targetDatabaseFileName, true);

Then the program came with runtime exception: "IOException was unhandled: The process cannot access the file 'C:BalanceDatabase_1.mdf' because it is being used by another process."


Is it because the database file was sill attached to the local SQL Server express instance? What can I do to bypass this problem? Detach the database file? or dispose the local SQL Server express instance?

Many thanks indeed!

View 9 Replies View Related

Cross DB Dialog Security Issues. Was: Can't Route To Another LOCAL Broker Instance

May 31, 2007

Hi Remus,



I am experiencing the same problem, and I can't get the easy fix to work. I drop and create the DB's in between tests, so it is not related to having an old certificate in the DB, as in the case of Tilfried.



The situation is as follows:

DB1 owned by login1, has a user for login2; this DB is for the initiator

DB2 owned by login2, has a user for login1; this DB hosts the target

Both DB's have TRUSTWORTHY flag set to ON

Error in sys.transmission_queue: 'Error 916, State 3: The server principal "Login1" is not able to access the database "DB2" under the current security context.



Going on a limp, I decide to add a remote service binding in DB1, binding the user for Login2 to the target service, even though BOL explicitly states that this is only required for cross-server communications. This does change the situation - I still get an error, but a new message is sys.transmission_queue: "Dialog security is unavailable for this covnersation because there is no certificate bound to the database principal (Id: 5). Either create a certificate for the principal, or specify ENCRYPTION = OFF when beginning the conversation." I already know that the first option works, but I wanted to get the simple solution running. As for the second option, I doublechecked and the initiating procedure DOES already specify ENCRYPTION = OFF in the BEGIN DIALOG CONVERSATION command. My theory is that the remote service binding somehow forces SB to use encryption, but (a) that is not stated in the error message, and (b) if so, then how to get the messages sent over to the target service without using the binding?



==> EDIT: Just saw that you confirmed this theory in your last reply to Tlifried. So I am indeed back to having to find out how to get this to work without remote service binding - it should be possible, but how???



BTW, SELECT @@VERSION shows that I'm on build 3054, in case it matters.



Between all the errors in BOL and less than helpfull error messages produced by SB, I feel like I'm slowly losing my sanity. Please help!



Best regards,



Hugo Kornelis

View 6 Replies View Related

Rsconfig Command Format For Local Named Instance - Setting Up An Unattended Account

Dec 27, 2007

my local instance of reporting services is named and therefore I think causing me a problem when I issue the following command to set up an unattended account...

rsconfig -s localhostinstance name -e -u domain nameuser name -p password


the message I keep getting is "No Reporting Services instance found on local host.". I tried a couple of things including replacement of the word localhost with my computer name but to no avail. I tried single and double quotes around the -s parameter but no success.

Anybody know how to do this?

View 2 Replies View Related

SQL Server Management Studio Cannot Connect To Local Instance Of SQL Server 2005 SP2

Aug 8, 2007

Hello,

I just installed SQL Server 2005 Enterprise edition from my company's DVD. It was installed with the setting of using both Integrated windows authenitication as well as basic named authenication. I installed all the options too: Database Engine, Analysis Services, Reporting Services, SQL Server compact edition, and Integration Services. When I look at services there are: SQL Server Integration Services, SQL Server Analysis Services, SQL Server Reporting Services, and SQL Server Browser. All of which are running. Something that took me offguard was the installation did not ask me to provide an SA password. Other than that, the install looked like it went good.

I was able to connect to the local instance of the SQL Server 2005 using the SQL Server Management Studio. I could connect with SA, or connect with Integrated Windows Authenication. Whoohoo. Off and running! As a matter of fact, for the SA account I could use any password and it would still log me in.

First thing I did was I went in to the copy wizard to attempt to copy a database from a server on our network to my local box. First it asked me for the remote server. Then when I specified my local instance in the wizard, the wizard complained that my local instance was NOT SQL Server 2005. Doh! This I didn't understand. I figured maybe I need to check for MS updates. Sure enough, I found that ther was a SP2 and then a hot-fix for that SP2. I applied both. Now I cannot connect from SQL Server Management studio to my local instance of SQL Server 2005 database server. I get the following error:

"An error occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)"

However, I went in to see what other services I could connect to, and here's the results:

Analysis Services : OK!
Reporting Services (Windows Auth/Basic/Forms) : NG "The reporting Services Instance could not be found (Microsoft.SqlServer.Management.UI.RSClient)"
SQL Server Compact Edition : NG "The database cannot be found. Check the path to the database. [ File Name = CCG092 ] (SQL Server Compact Edition ADO.NET Data Provider)
Integration Services : OK!

I can connect to other SQL Server databases on our network. However, just not my local one. No one on the network can connect to me either.

I even turned off my windows firewall and still no luck connecting to my own.

So something really went wrong when I applied SP2, however, admittedly from the error message when I tried to use the copy wizard, something was probably already wrong.

Any ideas?

Thanks!

View 4 Replies View Related

Can't Connect To Local Server Instance MSSQLSERVER In SQL Server Management Studio (SQL2005 Sp2/Vista)

Apr 7, 2007

Can't connect to local server instance MSSQLSERVER in SQL Server Management Studio (SQL2005 sp2/Vista).



SQL Server Configuration Manager reports SQL Server2005 services: SQL Server (MSSQLSERVER) Running. This would indicate the name of the SQL server is "MSSQLSERVER" correct? I chose "default" instance during the install and that is the name it gave itself.

I tried connecting to the server using the following for the Server Name: MSSQLSERVER and .MSSQLSERVER neither works.



The only thing that works for my installation is just plain "." (no quotes) and nothing else. Can this be correct because I can't find any reference to this. Thanks.

View 1 Replies View Related

Please Help *** Failed To Generate A User Instance Of SQL Server Due To Failure In Retrieving The User's Local Application Data Path

Apr 28, 2008

Hi all hope some one can help - please bear with me new to this
Basically I have had to change pc's so I copied and pasted my ASPNET.MDF and LDF from my old pc to new PC including webpages/apps etc.. created.
However now all I get is "Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path """"
Just don't understand what permissions the db should have, does it need to match the SQL Express owner...
 
any help would be most appreciated
 
Thanks
 
Chris 
 
 

View 5 Replies View Related

Failed To Generate A User Instance Of SQL Server Due To Failure In Retrieving The User's Local Application Data Path

Jun 21, 2005

I installed my asp.net 2.0 web application  and sql express june editon on my windows 2003 server.When the application tries to reach the database i am getting the following error"Failed to generate a user instance of SQL Server due to failure in retrieving the user's local application data path. Please make sure the user has a local user profile on the computer. The connection will be closed."I can understand that it has something to do with user right but more than that I am pretty lost. Can anyone translate this error for me and give me some tips on what do to.I checked first the user running the sql express service and saw it was the NETWORK SERVICE user. I changed it to be the local system account but that did not make any difference. The application is running just fine on my local computer(Win XP sp2). This one has SQL express April edition though.

View 3 Replies View Related

Local SQL Server Instances Not Showing Up On Local Servers Tab Of Management Studio Logon Screen

Oct 2, 2007

We have a 64-bit VM server running SQL Server 2005. The SQL Server on this particular VM server has 6 local instances installed. On the Management Studio logon screen I can type the full name of the local instance and connect to it, however if I press the drop down in the Server name field, choose Browse and select the Local Servers tab there is nothing listed under Database Engines.

Any idea why the 6 local instances don't show up under Database Engines? This is preventing me from installing a vendor application because their installer looks for local SQL Server instances on this server, but if SQL Server won't even show the local instances then the installer doesn't see them either.

Any help is greatly appreciated.

Thanks,
Craig

View 3 Replies View Related

Can I Use Sqlserver2005 With Asp.net 1.1 ?

Feb 9, 2006

hie
can i use sql server 2005 along with asp.net 1.1 as my front end ?
any idea of doing this ?

View 1 Replies View Related

SqlCacheDependency With SQLServer2005

May 21, 2007

I have implemented a caching strategy using the sqlcachedependency and sql server 2005 backend using the broker service.This works fine and well when i am connecting to the SQL Server 2005 under service account that is in the role db_owner. In a production enivironment i am reluctant to do this so i created another service account that only has execute permissions on the stored procedures.When i use this limited service account for my ASP.net web application, the broker service does not send any messages to the web app to invalid the cache. When checking the event log and SQL profiler i get errors all relating to the user not having access to the SqlQueryNotificationService queue. So i did a lot of googling and tried running the grant scripts below with no luck using this limited service account. Keep in mind everything works fine if i use an account with db_owner priviledges. These are the grants i have tried based on numerious articles  GRANT CREATE PROCEDURE TO three_d_ss_loginGRANT CREATE QUEUE TO three_d_ss_loginGRANT CREATE SERVICE TO three_d_ss_loginGRANT SUBSCRIBE QUERY NOTIFICATIONS TO three_d_ss_loginGRANT RECEIVE ON QueryNotificationErrorsQueue TO three_d_ss_loginGRANT REFERENCES ON CONTRACT::[http://schemas.microsoft.com/SQL/Notifications/PostQueryNotification] TO three_d_ss_login These are the grants i have tried that does not work GRANT SEND ON SERVICE::SqlQueryNotificationService TO three_d_ss_loginGRANT RECEIVE on SqlQueryNotificationService_DefaultQueue to three_d_ss_loginCan some one suggest what i need to do to get sqlcacheddependencies to work with a sql2005 backend under a limited priviledged service account?  ThanksJim 

View 4 Replies View Related

Xquery Help SqlServer2005

Nov 22, 2006

I have the following XML in an XML column in a SQL 2005 Database.<DeliveryList xmlns="http://schemas.adventure-works.com/DeliverySchedule"><Delivery SalesOrderID="43659"><CustomerName>Steve Schmidt</CustomerName><Address>6126 North Sixth Street, Rockhampton</Address></Delivery><Delivery SalesOrderID="43660"><CustomerName>Tony Lopez</CustomerName><Address>6445 Cashew Street, Rockhampton</Address></Delivery></DeliveryList>I need to query that column using the value method to retreive the addressof the first delivery. I come up with this,SELECTDeliveryList.value('data((/DeliveryList/Delivery/Address)[1])','nvarchar(100)')DeliveryAddressFROM Sales.DeliverySchedulebut it tells meXQuery [Sales.DeliverySchedule.DeliveryList.value()]: There is no elementnamed 'DeliveryList'I have tried every permutation of the path and I can not seem to get it towork? Any ideas?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved