No Active Open Transaction
Jun 8, 2015I was expecting this to return an active transaction
begin transaction
select * from table1
dbcc opentran
(no COMMIT or ROLLBACK)
ADVERTISEMENT
SQL Server Admin 2014 :: How To Setup Open Querying Of Active Directory
Mar 9, 2015I am trying to setup querying Active directory from sql for the first time.
We are running on windows server 2012 and using sql 11.0.2100.60. Have tried the following
sql is on sever dev
AD is on sever DO
EXEC sp_addlinkedserver 'ADSI', 'Active Directory Services 2.5',
'ADSDSOObject', 'adsdatasource'
GO
[Code] ....
I get the following error when I try and query
Msg 7321, Level 16, State 2, Line 2
An error occurred while preparing the query "SELECT name
FROM 'LDAP:// xxxx.internal'
WHERE objectCategory='Person' AND
objectClass = 'contact'" for execution against OLE DB provider "ADSDSOObject" for linked server "ADSI".
No Transaction Is Active
May 3, 2008Hi all,
I m trying to get record from one server to another using Commit and Rollback feature in the Sql Server and getiing error message--
"No transaction is active."
below is my sql block
BEGIN TRAN
BEGIN TRY
INSERT INTO [SERVERNAME1].[DATABASENAME].[dbo].[TABLENAME](PurchaseByUserID,price,purchasedate,affiliateID,LicenseeID,debittype)
SELECT PurchaseByUserID,price,purchasedate,affiliateID,LicenseeID,debittype
FROM [SERVERNAME2].[DATABASENAME].[dbo].[TABLENAME]
WHERE Convert(smalldatetime,purchasedate)>=Convert(smalldatetime,'2/14/2008 00:00:00') and Convert(smalldatetime,purchasedate)<= Convert(smalldatetime,'2/14/2008 23:59:59')
COMMIT TRAN
END TRY
BEGIN CATCH
Rollback TRAN
END CATCH
END
Please replay ASAP.
No Transaction Is Active
May 5, 2008
Posted - 05/03/2008 : 13:37:25
Hi all,
I m trying to get record from one server to another using Commit and Rollback feature in the Sql Server and getiing error message--
"No transaction is active."
below is my sql block
BEGIN TRAN
BEGIN TRY
INSERT INTO [SERVERNAME1].[DATABASENAME].[dbo].[TABLENAME](PurchaseByUserID,price,purchasedate,affiliateID,LicenseeID,debittype)
SELECT PurchaseByUserID,price,purchasedate,affiliateID,LicenseeID,debittype
FROM [SERVERNAME2].[DATABASENAME].[dbo].[TABLENAME]
WHERE Convert(smalldatetime,purchasedate)>=Convert(smalldatetime,'2/14/2008 00:00:00') and Convert(smalldatetime,purchasedate)<= Convert(smalldatetime,'2/14/2008 23:59:59')
COMMIT TRAN
END TRY
BEGIN CATCH
Rollback TRAN
END CATCH
END
Oldest Active Transaction
Jan 25, 2001Is there a stored proc to tell details of the oldest active transaction ?
View 3 Replies View RelatedMsdtc/transaction Is Not Active
Oct 1, 2007Server 1: Win2003, Clustered Environment, SQL 2005sp2
Server 2: Win2003, no cluster, SQL 2000sp3a
Server 3 (aka, client): Win2003, using ODBC (sql native client) to connect to server 1
I'm attempting to run an SQR that connects to server 1, yet updates server 2. Right now, all I'm doing is the statement
delete from <server2>.<database>.dbo.table
and am getting the error (DUL41 is server 2):
SQR 5528) ODBC SQL dbexec: SQLExecute error 7412 in cursor 1:
[Microsoft][ODBC SQL Server Driver][SQL Server]OLE DB provider "SQLNCLI" for linked server "DUL41" returned message "No transaction is active.".
(SQR 5528) ODBC SQL dbexec: SQLExecute error 7391 in cursor 1:
[Microsoft][ODBC SQL Server Driver][SQL Server]The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "DUL41" was unable to begin a distributed transaction.
If I use query analyzer (or whatever we're calling it now) to connect to server 1 and run the statement, it works fine. But, SQR is connecting via ODBC (that's different) and also is SQR.
I'm also not 100% sure all of the new MSDTC aspects are configured correctly, but I've gone through the settings a few times. Right now, I pretty much have everything set about as open as possible (these are test servers on the same network) and am still getting the error.
Any help, or ideas I could try, would be great. Thanks.
Updatable Subscriptions - No Transaction Is Active
Apr 11, 2007This may be a simple answer, but I was wondering when setting up transactional replication with updatable subscriptions why does this error occur?
Error:
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "REPLLINK " was unable to begin a distributed transaction.
Changed database context to 'MyDB'.
OLE DB provider "SQLNCLI" for linked server "REPLLINK" returned message "No transaction is active.". (.Net SqlClient Data Provider)
I've looked for MSDTC security documents and checked every box in the security dialog and selected the 'No Authentication Required€™. MSDTC and SQL Agent are running as NETWORKSERVICE user. I also setup permissions on each individual DCOM Objects for SQL Server. And MSDTC service is running. Both Servers are SQL Server 2005 Standard and Windows 2003 R2. The publisher is on the same box as the distributor. No domains or trusts setup on either. This error occurs when changing data on the subscriber.
Thanks,
Patrick
Tempdb Log Mode Waiting Active Transaction
May 22, 2007I am relatively new to SQL Server so excuse my ignorance.
I have noticed in many of my SQL Server 2005 instances that the tempdb database is very often reporting the log mode as waiting active_transaction or waiting checkpoint.
Is this of concern, how can I determine the cause of these waits and how can they be reduced or eliminated ?
Transaction Open
Jul 6, 2004Hi
How do we will know whether transaction is open or closed.
Nageswar
Find And Rollback An Open Transaction
Oct 15, 2007We have a locked table and all I need is a way to show all open trans, so I can roll teh offender back
View 1 Replies View RelatedTransaction Left In Open State On SQLServer 2000 And JDBC
Sep 6, 2007I have a problem where my connection always has an open transaction as viewed by activity monitor.
I am using the latest MS SQL Server 2005 JDBC driver (1.1) and connecting to SQL Server 2000.
This issue arises only when selectMethod=cursor and autoCommit is set to false. This issue does not exist when I connect to SQL Server 2005.
Has anyone else seen this issue?
How can this issue be resolved?
Thanks
Peter
Open Transaction With Sleeping Status And Wait Type As AWAITING COMMAND
Sep 4, 2015During our DR drill we found that the same code which used to run perfectly fine on our Primary Data Centre is running very slow on Disaster Recovery DB Server and there are Lot's of open transaction with sleeping status and waittype as 'AWAITING COMMAND'.CPU, Memory and disk utilization are good. The ping reply between the app server and the DB server is well within the limit's even blocking is not their, also nothing is reported in the error logs. We are using SQL server 2014 STD 64 BIT on Windows Server 2012.
View 6 Replies View RelatedSQL Server 2012 :: Query To Count How Many Sessions Are Active And Remain Active Per Hour
Jan 22, 2015I have a table with the following columns employeeSessionID, OpDate, OpHour, sessionStartTime, sessionCloseTime. I need to see how many users remain active per hour. I can calculate how many logged in per hour, but I am stumped on how to count how many are active per hour. I have a single table that stores login data. I have created a query that pulls out the only the data needed from the table into a temp table using this query. Also note it is possible that the sessionCloseTime is null if the device has not been logged out this would need to be counted a active.
TABLE NAME #empSessionLog Contains the time stamp data OpDate, sessionStartTime and sessionCloseTime.
OpDatesessionStartTimesessionCloseTime
2015-01-202015-01-20 14:32:59.1302015-01-20 14:33:14.6299166
2015-01-202015-01-20 06:58:33.7302015-01-20 15:27:16.9133442
2015-01-202015-01-20 09:56:22.8402015-01-20 17:56:29.7555853
2015-01-202015-01-20 05:59:18.6132015-01-20 14:05:19.0426707
[code]....
can see how many sessions logged in per hour with the following statement:
SELECT
opDate,
FORMAT(DATEPART(HOUR, sessionStartTime), '00') AS opHour,
Count(*) AS Total
FROM #empSessionLog
Group BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00')
Order BY opDate, FORMAT(DATEPART(HOUR, sessionStartTime), '00') ASCResults:
opDateopHourTotal
2015-01-20041
[code]....
Where I am stuck is how do I count the sessions that remain active per hour until the session is closed with the sessionCloseTime.
There Is Not Enough Disk Space Error While Installing SQL In A Active/Active/Passive Cluster
Mar 5, 2008
Hi
I am having some teething problems while installing SQL on a 3 node cluster. Within the Cluster configuration I have 3 Cluster Groups with each of them having their associated disk resources. All these disk resources physically exist on a SAN.
The actual cluster is running absolutely fine and I can access all the disks from their respective owner node. The problem only starts when I start installing SQL Server 2005 on this cluster. I specify the Cluster group from the Cluster Group Selection and choose the desired partition and then the error message pops up
"There is not enough diskspace on the destination disk for the current SQL Server data files. To proceed, free up disk space to make room for data files, or install the data files to a different drive"
But the disk I am trying to install it on is 264Gb and none of it is used. I have also tried to change it to a different disk within the same Cluster group but to no avail. I have even tried to install it in a different cluster group all together but I get the same error message.
I have googled around havent found anything so far. The disks have got full permissions for the account I am installing SQL with.
Any help will be much appreciated.
Regards
Adnan
Active/Active SQL Server Clustering With Multiple Instances
May 12, 2008Hi
I am newbie in SQL Clustering. I have set up a Windows Server Cluster with 2 nodes and am having the following problem with Physical Disk resource for cluster groups:
My Default Cluster Group (named Cluster Group) has IP Address, Network Name, Physical Disk and MSDTC resources. In addition to that my Default SQL Server instance resources are also in this group. I had this initial set up for Active/Passive mode.
Now I am trying to set up a SQL Cluster in Active/Active mode. For this I have to install another instance of SQL Server in the existing cluster and make a separate cluster group for its resources. I made a new cluster group (SQL Instance Group) with an IP Address and a Network Name resource for this new instance but I dont have any Physical Disk resource to allocate to it. As such while installing the SQL Server Instance I get stuck when I'm asked to select the quorum disk to be used.
Is it possible to configure two quorum disks, one for each group?
What's the concept of dedicated disks resource for each sql instance in a group? Is this same as the quorum disk? If this is not a shared disk how do I configure a dedicated disk resource for my second cluster group (SQL Instance Group)?
Anyone could please help me out with this?
Are There Any Issues With An Active/Active Cluster With A Remote Mirror For DRP
Nov 30, 2006Hi folks,
We are going thru the process of scoping an active/active cluster at one site.
I was wondering whether there will be any issues with mirroring (DB by DB) off the cluster into non clustered server at an alternate DRP site.
Regards, Brian
Sutherland
Install Active Active Sql 2005 2 Node Cluster
Mar 12, 2008
Hi all, My aim to install active/active 2 node SQL 2005 cluster. I have installed sql cluster on one mode, which automatically installed on node 2.
it works great. However When i tried to install second virtual server, it is not allowing me to install.
it says already install, can anyone tell me how to install active active cluster
Active/active Sql Server Config; Shared Dbs
Nov 2, 1999Hi,
We are trying to set up an active/active configuration of a SQL Server
cluster, and we had a few questions.
Initially, we want to have 2 Database Servers that would share the same
Database (both reading/writing to the same tables).
However, from reading the MS docs, we find out that we can have what
they call an "active/active" configuration using a Cluster but they
need to have 2 different disk sets, i.e. having 2 separate databases.
If this assumption is correct, how does the data get synchronised
between the 2 databases (that are on the 2 different disks sets)?
Can anyone help? thanks
Axel
ACTIVE/ACTIVE SQL Server 2000 Cluster
Oct 12, 2002ACTIVE/ACTIVE SQL Server 2000 Cluster
This was my plan.
Physical box - box1,box2
virtual box - virtual1
i have a active/passive cluster virtual1 (primary node box1, secondary box2)
I am creating another virtual box on box2 as primary node by name virtual2)
whenever my installation setup runs my default server name is greyed out. it always requires a instance name.
Is that the way it should work?
i can only use instance for active/active failover?
please advice
MSDTC In Active/Active MSCS Cluster
Jun 29, 2004How do I install MSDTC in an active/active MSCS cluster environment?
If I run comclust.exe, I can only activate MSDTC on one of the nodes at a time.
I need DTC on both nodes.
(Opsys is W2K with SQL 2000)
//Mange :)
Active/Active SQL Server Cluster And OLTP
Sep 27, 2005Hello folks,
have you ever heard of an Active/Active SQL Sever 2000 Cluster deployed in a pure OLTP environment?
Some 8 years ago I have learned about a bespoke solution for the SAP ERP system (not the BW!) with DB2 Parallel Server for a huge German company. Then again, I would expect that Oracle RAC might fit into an OLTP environment, although I never heard about a real world implementation.
All this led me to believe clustering is good for failover purposes, and for decision support services, not quite for OLTP applications.
So if you see a point in Active/Active Clustering and OLTP please come forward and explain.
Cheers,
Johann
P.S: For those of you who want to know: Consultants from www.hiltes.com want us to deploy an Active/Active Cluster for their Fashion 3000 Net stock software.
SQL 2000 Active/active Cluster And Different IP Adresses
Mar 22, 2007We run several SQL 2000 SP4 instances on IA64 active/active cluster. The OS we run with is Windows Server 2003 SP1. We have different network cards : 2 network cards teamed for production purposes in domain X and 1 network card dedicated for problem solving in domain Y.
First we configured the cluster with only the 2 teamed network cards for production purposes in domain X. Later we introduced the second network card for problem solving in domain Y.
Everything looks fine. The (virtual) SQL instance listens on two different IP adresses on TCP port 1034. If we try to make connection via isql, EM or Query analyzer than we can directly contact the SQL instance from a workstation/server within domain X but this doesn't work form a workstation/server within domain Y. However if we use the specific TCP port in the connection in domain Y the connection is setup. We wish however not to use explicit TCP ports in setting up connections.
Has anyone experienced the same problem before or has anyone an idea how to solve the problem?
Applying SP To 2005 Active/active Cluster
Jun 8, 2007I have a 2005 active/active cluster and want to apply SQL server 2005 SP2 to both node.
I know that for active/passive , the sp can simple be installed on the active node(instance) and everything will be replicated to the other node.
bear in mind what I have SSIS and SSAS and SSRS running on the active/active cluster.
what is the rigth method for applying the SP to activeactive cluster?
Thanks
Active / Active Cluster Win2K
Mar 5, 2001Hi
While configuring an active / active cluster, do I need to run the SQL setup on both nodes?
The SQL2K setup installs binaries on localdisks of both nodes - hence the question.
thanks
Liju
Active/Active Clustering Config
Feb 22, 2000I have setup an active/active clustering environment for SQL Server, however it is 2 seperate virtual servers. How can I set them up to exist as one virtual server containing both active installations? Can this be done? I have two compaq 8500 w/8 processors each. I need to be able to cluster these configurations to take advantage of all 16 processors in one virtual SQL Server. Can it be done?
If you can answer these questions, you will have my undying gratitude.
Thanks in advance.
SQL7 In Active/active Cluster
Sep 21, 2000Hi
I am running some tests on SQL7 in an active/active cluster and have a couple of queries
1. When I create an ODBC DSN, why is the "Use the Failover SQL Server if the primary SQL Server" checkbox disabled
2. To test, I was running SQL queries from Access over the DSN created. When the Primary Server went down, I had to reconnect to re run the query - Is this normal?
3. Can someone point me to any documentation on the above scenario that would shed some more light?
Thanks
Liju
Upgrad SQL 6.5 To 7.0 In An Active/active Cluster
Oct 26, 1999I currently have a two node HP hardware active/active cluster server. Running windows NT 4.0 Enterprise and dSQL server 6.5 sp 3. I want to upgrade the cluster to SQL 7. I would like to know if anyone ran into any problems or has sucessfully attempted this.
Also I read a few months ago about a gottcha involving NT sp4 and SQL sp5a that would prevent a node from failing over. Has this been corrected and does it affect SQL 7.
thanks
Active/active SQL 2000 Cluster
Sep 27, 2002Hi
Is there anyone who knows where I can get some information about
installing an ACTIVE/ACTIVE SQL 2000 Cluster server (MSCS).
I have no problem setting up an active/passive failover cluster.
Where can I get more information? Do I need two instances? Two databases?
What's the difference between active/active and active/passive?
Thanks!
Active/active Sql Server Cluster
Jan 20, 2004Hello, Can anyone please explain how the failover processes works on a sql server 2000 2 node active/active cluster.
Given the following
You have 2 node active/active cluster NodeA & NodeB
Question
1. How many SQL instances need to be installed on each node?
2. If the answer to question #1 is one instance per node, then
say if NodeA fails NodeB will take over all the resources of NodeA
including the master database, How does that work , how can once instance (in nodeB) handle two master database i.e its own master database and the one taken over from NodeA.
RAM Config For Active/active Sql Cluster
May 18, 2008Hi,
I've just setup an 2 node active/active sql cluster (my first). Both servers have exactly the same specification, 16GB of RAM each and SAN attached. My question is, how do I configure the min and max memory for each sql instance. I've read some where that I need to follow the 20-40-40 rule as, 20% for the OS, 40% for the active sql instance on the node and the other 40% is for the other sql instance if it fails over. Are there any other gotcha that I need to be aware of? Can someone share some light with me in regards to this? Thanks
Ken
Detect Active/Active Node
Jul 3, 2007We have an active/active node setup with SQL 2005. Does anyone have any samples of VBS I could use to see what node is actually taking requests at a certain time? What I want to determine is what the actual active node is.
Thanks.
2 Node Active Active SQL Cluster
May 18, 2006I want to host 2 seperate SQL databases and wanted to know if it would be possible to run this in an active active cluster config which each database running on a different server.
The clustering would be there in the event of failure of one of the servers but for normal operation the two sql instances would be completely seperate.
Is this configuration possible and would this give the best performance and resiliance from a 2 server setup.
What do you think?
Active/Active CLuster Can Not Add 2nd Node
Jun 3, 2007Help, I have an active/active cluster with SQL2k5 Ent with SP2 installed on node1 that is currently running live apps, I need to add the 2nd node to have fail over functionality but if I use the Change Install from Add or Remove Programs on the primary node to add the 2nd node I get the following error.
"The File 'c:....SqlRun_SQL.ms' is not a valid installation package for the product Microsoft SQL Server 2005(SQL2K5VVS01). Try to find the installation package 'SqlRun_SQL.msi' in a folder from which you can install Microsoft SQL Server 2005(SQL2K5VVS01).
No I assume this is because node 1 has had service pack two applied. Does anyone have instructions how I can add node two without having to completely uninstall Node 1, as the doc€™s with SQL2005 SP2 say it can not be removed, a complete uninstall of 2005 must be done???