No Errors. No Replication, Either...
Jul 3, 2007
I have one central publisher server and several remote merge pull boxes. On random remote servers, at random times, replication will fail. The data is inconsistent between the master publisher and the remote merge pull subscribers. (i.e., The subscribers have more recent data than the publisher.)
There are no error messages generated, and it's only for one article. The rest seem to update fine.
I am a complete noob when it comes to replication. How would I even start troubleshooting this? :S
Any assistance is appreciated. Thanks.
-D.
View 14 Replies
ADVERTISEMENT
Jun 1, 2000
I'm running SQL 7.0 with SP2 applied. I have a database that I'm trying to replicate over the Internet.
I'm having a problem getting the initial snapshot. The total amount of data in the snapshot is 3GB. One .bcp file is 2GB and another is roughly 900MB. There are also a few smaller files.
I have my publisher and distributor setup correctly as well as my subscription. I have tested with smaller datasets. Near as I can tell, there is a problem with my files being too big. I get all the .sch files. The first .bcp file is the 2GB file.
I have tried replicating to another server on my LAN (100base-T) and get the same error.
I don't have the exact error, but it's something like:
'Failed to get file sql01_data1_data120000601105138igfile.bcp'
In my FTP Log, I see that transfer was started then aborted.
Any help on how to deliver large amounts of data over FTP would be greatly appreciated.
Thank you,
Charles
View 2 Replies
View Related
Feb 7, 2000
I setup Transactional replication between two SQL Servers.
I am getting the following errors: " Could not find stored procedure 'sp_MSins_stores'." and the job fails.
I dont have any idea why I am getting these errors. I am getting this error for every table in the publication.
Any suggestions are welcome.
Thanks in advance.
View 1 Replies
View Related
Nov 30, 2007
Hi all
I have set up Transactional Replication from 2005 to 2000. After running a few transactions I disabled the replication, pointed one of our IIS servers to the 2000 database to do a quick functional test and validate replication. We are getting "Cannot insert duplicate value in object XXXX with violation of PK constraint errors. I was able to figure out the cause. This was happening for tables with Identity columns which have been set NOT FOR REPLICATION. The IDENT_CURRENT values are different than the MAX value in the table. so doing a DBCC CHECKIDENT with RESEED seemed to have fixed the issue. Now I am running the DBCC command on ALL tables that have been used for Replication and have NFR set to true. Its taking a while as the tables are big.
Now I am wondering if anyone has faced similar issue? Is this a known issue? I have googled and have found nothing or no one complaining about this. I believe most people have used replication for reporting where they are just querying the databases. We are testing replication as a fall back scenario.
Opinions welcome..
thanks,
Don
View 8 Replies
View Related
Apr 11, 2007
I currently have replication (transactional) set up within my domain successfully using 2000 and 2005.
I need to start replicating to a hosting center for a web app from my server out on the DMZ. I can use SSIS and SMS to connect, update data, etc. but when I try to replicate out there it gives me the following errors:
1. Tells me it needs a named instance so I give it the hosted server name : ABC123
2. Then I get the following:
TITLE: Connect to Server
------------------------------
Cannot connect to ABC123.
------------------------------
ADDITIONAL INFORMATION:
Failed to connect to server ABC123. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 53)
Any help would be greatly appreciated!!
TIA
Tena
View 5 Replies
View Related
Oct 13, 2006
I am investigating the feasibility of a configuration with 3 databases on SQL2005
DB_A is an OLTP database and serves up transactional publication pub_txn - with updateable subscriptions
DB_B is a subscriber database which subscribes to pub_txn
DB_B is also a publisher which serves up merge publication pub_merge
DB_C is a subscriber database which pulls pub_merge
===============================
Updates on DB_A are successfully replicated to DB_B
Howvever, when DB_C pulls updates, it doesn't find the update sent to DB_B
===============================
Updates on DB_B are successfully replicated to both DB_A and DB_C
===============================
Updates on DB_C initially failed with the error
Msg 916, Level 14, State 1, Procedure trg_MSsync_upd_course_type, Line 0
The server principal "repllinkproxy" is not able to access the database
"DB_C" under the current security context.
I then changed the login repllinkproxy to be a db_owner in DB_C
I now get the error
Msg 208, Level 16, State 1, Procedure sp_check_sync_trigger, Line 23
Invalid object name 'dbo.MSreplication_objects'.
=================================
I have three questions as a result
1) Is there anything fundamentally wrong with what I am trying to achieve?
2) Why is update on DB_A not reaching DB_C
3) Why can't I update DB_C?
Any suggestions gratefully received
aero1
View 10 Replies
View Related
Oct 25, 2005
Hi,
I have more than 80 databases on my publisher (SQL Server 2000 SP4), I tried to enable Transaction Replication on all of those databases instantly through some T-SQL programming and DTS Packages. Every thing works fine until the snapshot agents starts to take sanpshot from the publisher databases. As soon as their snapshot agents start for those 80 databases, they start giving the deadlock error. All 80 snapshot agents starts at the same time.
Error Message:
Transaction (Process ID xxx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Error Detail:
Transaction (Process ID xxx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
(Source: Server_Distribution (Data source); Error number: 1205)
---------------------------------------------------------------------------------------------------------------
WHY???
View 2 Replies
View Related
Jun 14, 2015
I am getting the error The transaction log for database 'ReplicationDB' is full due to 'LOG_BACKUP'.log_reuse_wait_desc from sys.databases is showing logbackup
The database is subscribed database. We configured transactional replication. But the transactional replication is getting errors and failed. Is there relation b/n this replication failures and log growth in subscriber db?
View 3 Replies
View Related
Aug 12, 2015
How to resolve the data inconsistent errors in merge replication ?
View 0 Replies
View Related
Jul 1, 2015
I recently updated the datatype of a sproc parameter from bit to tinyint. When I executed the sproc with the updated parameters the sproc appeared to succeed and returned "1 row(s) affected" in the console. However, the update triggered by the sproc did not actually work.
The table column was a bit which only allows 0 or 1 and the sproc was passing a value of 2 so the table was rejecting this value. However, the sproc did not return an error and appeared to return success. So is there a way to configure the database or sproc to return an error message when this type of error occurs?
View 1 Replies
View Related
Jul 31, 2006
I have a parent package that calls child packages inside a For Each container. When I debug/run the parent package (from VS), I get the following error message: Warning: The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
It appears to be failing while executing the child package. However, the logs (via the "progress" tab) for both the parent package and the child package show no errors other than the one listed above (and that shows in the parent package log). The child package appears to validate completely without error (all components are green and no error messages in the log). I turned on SSIS logging to a text file and see nothing in there either.
If I bump up the MaximumErrorCount in the parent package and in the Execute Package Task that calls the child package to 4 (to go one above the error count indicated in the message above), the whole thing executes sucessfully. I don't want to leave the Max Error Count set like this. Is there something I am missing? For example are there errors that do not get logged by default? I get some warnings, do a certain number of warnings equal an error?
Thanks,
Lee
View 5 Replies
View Related
Apr 20, 2006
Starwin writes "when i execute DBCC CHECKDB, DBCC CHECKCATALOG
I reveived the following error.
how to solve it?
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -2093955965, index ID 711, page ID (3:2530). The PageId in the page header = (34443:343146507).
. . . .
. . . .
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1635188736)' (object ID -1635188736).
CHECKDB found 0 allocation errors and 1 consistency errors in table '(Object ID -1600811521)' (object ID -1600811521).
. . . .
. . . .
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -8748568, index ID 50307, page ID (3:2497). The PageId in the page header = (26707:762626875).
Server: Msg 8909, Level 16, State 1, Line 1 Table error: Object ID -7615284, index ID 35836, page ID (3:2534). The PageId in the page heade"
View 1 Replies
View Related
Jun 15, 2007
I'm getting this, after upgrading from 2000 to 2005.Replication-Replication Distribution Subsystem: agent (null) failed.The subscription to publication '(null)' has expired or does notexist.The only suggestions I've seen are to dump all subscriptions. Sincewe have several dozen publications to several servers, is there adecent way to script it all out, if that's the only suggestion?Thanks in advance.
View 3 Replies
View Related
Sep 13, 2007
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies
View Related
Jan 17, 2002
Hi,
In my production box is running on SQL7.0 with Merge replication and i want add one more table and i want add one more column existing replication table. Any body guide me how to add .This is very urgent
Regards
Don
View 1 Replies
View Related
Aug 22, 2007
Hello,
I have this problem on a Production database.
DBCC OPENTRAN shows "REPLICATION" on a server that is not configured for replication. The transaction log is almost as large as the database (40GB) with a Simple recovery model. I would like to find out how the log can be truncated in such a situation.
Thank you.
View 4 Replies
View Related
Mar 6, 2007
Hello,I'm getting the following error message when I try add a row using aStored Procedure."The identity range managed by replication is full and must be updatedby a replication agent".I read up on the subject and have tried the following solutionsaccording to MSDN without any luck.(http://support.Microsoft.com/kb/304706 )sp_adjustpublisheridentityrange (http://msdn2.microsoft.com/en-us/library/aa239401(SQL.80).aspx ) has no effectFor Testing:I've reloaded everything from scratch, created the pulications from byrunning the sql scripts generated,created replication snapshots andstarted the agents.I've checked the current Identity values in the Agent Table:DBCC CHECKIDENT ('Agent', NORESEED)Checking identity information: current identity value '18606', currentcolumn value '18606'.I check the Table to make sure there will be no conflicts with theprimary key:SELECT AgentID FROM Agent ORDER BY AgentID DESC18603 is the largest AgentID in the table.Using the Table Article Properties in the Publications PropertiesDialog, I can see values of:Range Size at Publisher: 100,000Range Size at Subscribers: 100New range @ percentage: 80In my mind this means that the Publisher will assign a new range whenthe Current Indentity value goes over 80,000?The Identity range for this table cannot be exhausted! I'm not surewhat to try next.Please! any insight will be of great help!Regards,Bm
View 1 Replies
View Related
May 26, 2015
What is the main difference between snapshot and transactional and merge replication?
View 5 Replies
View Related
Jul 28, 2006
Hi,
I have a VB.net app that access a SQL Express database. I have transactional repliaction set up on a SQL 2000 database (the publisher) and a pull subscription from the VB.net app. I use RMO in the VB app to connect to the publisher. My problem is I am getting some strange behaviour as follows
- if I run the app and invoke the pull subscription it works fine. If I then close my app and go back in, I can access my data without any problem
- If I run the app and try to access data in my SQL Express database it works fine. I can then close the app, reopen it and run the pull subscription it works fine
however.......
- if I run the app, invoke the pull subscription (which runs fine), and then try to access data in my local SQL Express database without firstly closing and reopening the app, I get a login error
- if I run the app, try to access data in my local SQL Express database (which works fine), and then try to run the pull subscription I get a "the process cannot acces the file as it is being used by another process" error. In this case I need to restart the SQL Express service to be able to run replication again.
I get exactly the same behaviour when I use the Windows Sync tool (with my app open at the same time) instead of my RMO code to replicate the data.
I am using standard ADO.Net 2 code to access my SQL Express data in the app and closing all connections etc
Any advice appreciated !
Thanks
Ronan
View 2 Replies
View Related
Jun 28, 2007
Hi all,
I have recently setup a transactional replication in MS SQL 2000. After setting up the replication the clients TempDB grew by almost 60GB. Now the client is Blaming me for the TempDB GROWTH and saying that its because of the replication being setup i tried to convince them but they are not satisfied yet. Can anybody please tell me does replication cause the tempdb to grow. If yes then how. can u suggest any good link for getting to know the internal working of SQL Server replication????
Thanks in advance
Jacx
View 3 Replies
View Related
Aug 30, 2007
Hi all,
I know that adding a column using ALTER TABLE to add a column automatically allows SQLSERVER 2005 to replicate the schema changes to the subscribers, however, I would like to add a new column to an existing article that is being used for merge replication, however, I don't want this column to be replicated. Re-initialising the subscriptions is not a option. Help would be appreciated.
I am using SQLSERVER 2005 (SP1).
View 3 Replies
View Related
Sep 2, 2015
I have been researching on the proper steps or sequence to follow to completely remove SQL Server 2012 Transactional Replication. I have read articles about using SSMS as well as using replication stored procedures and some procedures use SQLCMD or just regular TSQL executed in SSMS. I have also read articles where people said all you really need is connect to the Publisher instance, find the publication you want to remove and choose "Delete" and everything will be taken care of behind the scene. I have three SQL servers that participate in transactional replication. SQL-P (publisher),
SQL-D (distributor) and SQL-S (subscriber). Do I need to connect to the distributor instance and the subscriber instance when removing transactional replication or is it just really connecting to the publisher and click delete on the publication? I want everything gone including any metadata, systems tables, distributions db and any other replication objects created during the initial configuration.
View 6 Replies
View Related
Apr 17, 2007
Hello everyone,I am involved in a scenario where there is a huge (SQL Server 2005)production database containing tables that are updated multiple timesper second. End-user reports need to be generated against the data inthis database, and so the powers-that-be came to the conclusion that areporting database is necessary in order to offload report processingfrom production; of course, this means that data will have to bereplicated to the reporting database. However, we do not need all ofthe data in the production database, and perhaps a filtering criteriacan be established where only certain rows are replicated over to thereporting database as they're inserted (and possibly updated/deleted).The current though process is that the programmers designing thequeries/reports will know exactly what data they need from productionand be able to modify the replication criteria as needed. For example,programmer A might write a report where the data he needs can beexpressed in a simple replication criteria for table T where column X= "WOOD" and column Y = "MAHOGANY". Programmer B might come along amonth later and write a report whose relies on the same table T wherecolumn X = "METAL" and column Z in (12, 24, 36). Programmer B willhave to modify Programmer A's replication criteria in such a way as toaccomodate both reports, in this case something like "Copy rows fromtable T where (col X = "WOOD" and col Y = "MAHOGANY") or (col X ="METAL" and col Z in (12, 24, 36))". The example I gave is reallytrivial of course but is sufficient to give you an idea of what thecurrent thought-process is.I assume that this is a requirement that many of you may haveencountered in the past and I am wondering what solutions you wereable to come up with. Personally, I believe that the above method isprone to error (in this case the use of triggers to specifyreplication criteria) and I'd much rather use replication services tocopy tables in their entirety. However, this does not seem to be anoption in my case due to the sheer size of certain tables. Is thereanything out there that performs replication based on complexprogrammer defined criteria? Are triggers a viable alternative? Anyalternative out-of-the-box solutions?Any feedback would be appreciated.Regards!Anthony
View 11 Replies
View Related
Oct 9, 2007
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example...
Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
thanks...
View 5 Replies
View Related
Nov 9, 2006
I have a wired situation..!I set up transactional replication on one of my development server (SQL2000 Dev Edition with sp4).It is running fine without any issues and all of a sudden, i noticed inmy repication monitor tab under Publisher where I usually see thepublication is empty now.I do see the snapshot agent, log reader and distribution agent under myagents inside the replication Monitor. But its usefull to see all 3agents in one window under publisher before. What happend? Is there anyway to get that inside that monitor? Has someone encountered thissitation before? Please advise....After that I tried to create a new set of replication on differentdatabase on the same server and i dont see those either underReplication Monitor - Publishers....All it says is (No Items)....I would appreciate any help to correct this issue... Thanks in advance..
View 2 Replies
View Related
Feb 25, 2000
When using the following format & .cmd file keep getting this error . . .
DB-LIBRARY error:
Unexpected EOF encountered in BCP data-file.
Have checked the .fmt & .cmd files & also the table layout that the data is being loaded into. Any help would be appreciated.
FMT File
6.0
28
1 SQLCHAR 0 30 "" 1 UserName
2 SQLCHAR 0 32 "" 2 Password
3 SQLCHAR 0 8 "" 3 PasswordExpirationDate
4 SQLCHAR 0 2 "" 4 HintQuestionID
5SQLCHAR 0 25 "" 5HintAnswer
6SQLCHAR 0 40 "" 6EmailAddress
7 SQLCHAR 0 1 "" 7MarketingEmailInd
8 SQLCHAR 0 1 "" 8 StatusEmailInd
9 SQLCHAR 0 30 "" 9 FirstName
10 SQLCHAR 0 30 "" 10 LastName
11 SQLCHAR 0 1 "" 11MiddleInitial
12 SQLCHAR 0 3 "" 12 Suffix
13SQLCHAR 0 9 "" 13SSN
14SQLCHAR 0 8 "" 14DOB
15SQLCHAR 0 1 "" 15 CustType
16SQLCHAR 0 1 "" 16GradeLevel
17SQLCHAR 0 1 "" 17 SharedComputerInd
18SQLCHAR 0 8 "" 18 SchoolCode
19 SQLCHAR 0 2 "" 19CampusCode
20 SQLCHAR 0 50 "" 20 SchoolName
21 SQLCHAR 0 8 "" 21 SchoolLastVerfiedDate
22 SQLCHAR 0 8 "" 22 DateCreated
23 SQLCHAR 0 8 "" 23 LastLoginDate
24 SQLCHAR 0 4 "" 24 LoginCount
25 SQLCHAR 0 4 "" 25 BadLoginCount
26 SQLCHAR 0 1 "" 26 Status
27 SQLCHAR 0 30 "" 27 LastModifiedUser
28 SQLCHAR 0 8 ";
" 28 LastModifiedDate
CMD File
BCP DEVL_CUSTOMER_DB..tblRegistered_Users_TempX in T:custbasedataincomingRegistered_User.txt /f T:custbaseapplsqlcpbuser.fmt /e T:custbasedata
eportsbuseri.err /o T:custbasedata
eportsbuseri.out /b 1000 /SDataserverjmk /User /Password
View 4 Replies
View Related
Jul 23, 1999
I have been receiving 644 errors on an index for one of my tables. We have dropped and rebuilt the index. Even BCP out, drop the table, create the table and BCP in everything and still have problems.
Has anyone else experienced problems with 644 errors? Did you ever determine the cause and are they any preventative ideas?
TIA
View 2 Replies
View Related
May 24, 2005
I get this error when i try to modify or fix a job
Cannot add, update, or delete a job(or ists steps or shcedules) that aoriginated from an MSX Server.
error 14274
Why is this? Any ideas. I checked the sysjobs in the msdb and they have the correct server name for the jobs?
View 2 Replies
View Related
May 11, 2004
Ok, whenever I try to connect, I get the following Error messages:
"SQL Server Registration failed because of the connection failure displayed below.
SQL Server does not exist or access denied.
ConnectionOpen (Connect())"
"An Error 1069 occured while performing this service operation on the
MSSQLServer Service"
I even went as far as uninstalling and reinstalling, but to no avail. Does anyone have an idea what's causing this? It was working fine and then all the sudden one day I start getting these messages and it won't work.
Thanks!
Smitty
View 6 Replies
View Related
May 5, 2008
I have a dynamics db that is used for archival purposes and it is not used very often. Now that someone decided to get some info out of it it wont let them. when I run dbcc I get the following message:
Msg 5242, Level 16, State 1, Line 1
An inconsistency was detected during an internal operation in database 'PACIF'(ID:12) on page (1:19451). Please contact technical support. Reference number 6.
Msg 8921, Level 16, State 1, Line 1
Check terminated. A failure was detected while collecting facts. Possibly tempdb out of space or a system table is inconsistent. Check previous errors.
I was just wondering if this meant anything to any of you? and since all of my backtapes have the same issue, is there any way to fix it?
thanks in advance.
View 11 Replies
View Related
Jun 5, 2007
Failer to generate user instance is the error.
View 1 Replies
View Related
Jan 21, 2008
Running SQL 05 Standard on a Vista box and I have about had it with Vista. Anytime I try to launch Config Manager I get Cannot connect to WMI provider. You do not have permission or the server is unreachable. So try I googled and tried everything I can fine from http://blogs.msdn.com/echarran/archive/2006/01/03/509061.aspx
C:Program FilesMicrosoft SQL Server90Shared>mofcomp "C:Program FilesMicrosoft SQL Server90Sharedsqlmgmproviderxpsp2up.mof" and now I get ..
An error occurred while processing item 10 defined on lines 73 - 79 in file C:s
qlmgmproviderxpsp2up.mof:
Error Number: 0x80041003, Facility: WMI
Description: Access denied
Compiler returned error 0x80041001
so I try every possible different permission setting for anything sql server - problem still happening... try procmonitor.. find the registry keys and grant full contorl to all of them.. problem still happending.. run the little fixwmi.cmd I found.. problem still happening..
try to uninstall SQL Server.. NOT - WMI error - try to reinstall over--- NOT WMI error.
What do I need to do to get this working. .this is becoming a serious hinderance to my productivity!!!
View 15 Replies
View Related
Jun 11, 2007
what a want to know is if there s a way to log sql server errors on a log file, table, these errors are not sql server logs which already exists, i want to log dead locks, sql server timeout errors vs on sql server or somewhere.
is it possible ?
may i use sql server profiler for that purpose?
thx in advance..
View 1 Replies
View Related
