No Idea If This Is The Right Place To Post... Need Stored Proc Help
Dec 6, 2006
Hello,
I am trying to make a stored proc that will tell me if there are any rows in a table. The table name is a variable that I get at the start of the proc it is not sent in. What I am looking for in the table is sent into the stored proc.
here is where the problem is, i can not save it. It does not seem to allow me to use the if exists with variables. I have tried it also without the + and with the + ' to create a string I cant seem to get it anyway I try.
if exists (SELECT * FROM + @TableName + WHERE + @ColumnName + = + @SearchStr2)
print 'got here ' +@TableName + ' '+ @ColumnName
END
Thanks for any help
View 7 Replies
ADVERTISEMENT
Feb 13, 2008
I am working with a large application and am trying to track down a bug. I believe an error that occurs in the stored procedure isbubbling back up to the application and is causing the application not to run. Don't ask why, but we do not have some of the sourcecode that was used to build the application, so I am not able to trace into the code.
So basically I want to examine the stored procedure. If I run the stored procedure through Query Analyzer, I get the following error message:
Msg 2758, Level 16, State 1, Procedure GetPortalSettings, Line 74RAISERROR could not locate entry for error 60002 in sysmessages.
(1 row(s) affected)
(1 row(s) affected)
I don't know if the error message is sufficient enough to cause the application from not running? Does anyone know? If the RAISERROR occursmdiway through the stored procedure, does the stored procedure terminate execution?
Also, Is there a way to trace into a stored procedure through Query Analyzer?
-------------------------------------------As a side note, below is a small portion of my stored proc where the error is being raised:
SELECT @PortalPermissionValue = isnull(max(PermissionValue),0)FROM Permission, PermissionType, #GroupsWHERE Permission.ResourceId = @PortalIdAND Permission.PartyId = #Groups.PartyIdAND Permission.PermissionTypeId = PermissionType.PermissionTypeId
IF @PortalPermissionValue = 0BEGIN RAISERROR (60002, 16, 1) return -3END
View 3 Replies
View Related
Sep 25, 2000
Hi,
Any pros and cons of putting sprocs into Source Safe?
Thanks,
Judith
View 2 Replies
View Related
Aug 24, 2006
I am having trouble executing a stored procedure on a remote server. On my
local server, I have a linked server setup as follows:
Server1.abcd.myserver.comSQLServer2005,1563
This works fine on my local server:
Select * From [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.dbo.TableName
This does not work (Attempting to execute a remote stored proc named 'Data_Add':
Exec [Server1.abcd.myserver.comSQLServer2005,1563].DatabaseName.Data_Add 1,'Hello Moto'
When I attempt to run the above, I get the following error:
Could not locate entry in sysdatabases for database 'Server1.abcd.myserver.comSQLServer2005,1563'.
No entry found with that name. Make sure that the name is entered correctly.
Could anyone shed some light on what I need to do to get this to work?
Thanks - Amos.
View 3 Replies
View Related
Jun 15, 2006
Hi All,Quick question, I have always heard it best practice to check for exist, ifso, drop, then create the proc. I just wanted to know why that's a bestpractice. I am trying to put that theory in place at my work, but they areasking for a good reason to do this before actually implementing. All Icould think of was that so when you're creating a proc you won't get anerror if the procedure already exists, but doesn't it also have to do withCompilation and perhaps Execution. Does anyone have a good argument fordoing stored procs this way? All feedback is appreciated.TIA,~CK
View 3 Replies
View Related
Jul 20, 2007
Is there a place where i can find events that takes place in the sql server? Like adding data to a database or something like that....
Regards
Karen
View 4 Replies
View Related
Feb 23, 2007
I have an ASP that has been working fine for several months, but itsuddenly broke. I wonder if windows update has installed some securitypatch that is causing it.The problem is that I am calling a stored procedure via an ASP(classic, not .NET) , but nothing happens. The procedure doesn't work,and I don't get any error messages.I've tried dropping and re-creating the user and permissions, to noavail. If it was a permissions problem, there would be an errormessage. I trace the calls in Profiler, and it has no complaints. Thedatabase is getting the stored proc call.I finally got it to work again, but this is not a viable solution forour production environment:1. response.write the SQL call to the stored procedure from the ASPand copy the text to the clipboard.2. log in to QueryAnalyzer using the same user as used by the ASP.3. paste and run the SQL call to the stored proc in query analyzer.After I have done this, it not only works in Query Analyzer, but thenthe ASP works too. It continues to work, even after I reboot themachine. This is truly bizzare and has us stumped. My hunch is thatwindows update installed something that has created this issue, but Ihave not been able to track it down.
View 1 Replies
View Related
Jan 7, 2004
thanks for reading.
i'm wondering if i can use a stored procedure in place of a UDF in the case where i want a return value based on a simple calculation involving the input parameter.
i'd like to use this inline in a query somewhere else. that's why the UDF.
the UDF would be something like this ...
create function getFiscalYear (@when datetime)
returns int
as
BEGIN
declare @rv int
-- months of Oct, Nov, Dec are rolled into following year
if datepart(month, @when) >= 10
select @rv = datepart(year, @when) + 1
-- whereas all other months stay in this year
else
select @rv = datepart(year, @when)
end
END
so, the only reason i'm not using this UDF (and haven't tested it either) is because i can't find (or can't remember how :( ) to add a UDF to my database. when i run this code in Query Analyzer i get an error on the keyword "function". but that's another question altogether.
thanks in advance. (a) for helping with a stored procedure that does the equivalent or (b) nudging me in the right direction towards getting UDFs to work in my SQL 2000 install.
View 5 Replies
View Related
May 8, 2007
Hello,
I am having an issue with the insert command in a stored procedure in SQL Server 2005. The procedure is designed to generate a Customer number and insert an initial value (a delivery charge) into an order table. Finally, it returns the customer number back to the caller. When I execute the stored procedure from SQL Server Management Studio, it works perfectly. However, when I call it from ASP.net, the procedure properly generates a Customer Number and returns it to my application, but the insert never takes place. Can someone help me figure out why it won't insert?
My ASP.Net (C#) code is here: SqlDataSource dsSelect = new SqlDataSource();
dsSelect.ConnectionString = ConfigurationManager.ConnectionStrings["obeConn"].ConnectionString;
dsSelect.SelectCommandType = SqlDataSourceCommandType.StoredProcedure;
dsSelect.SelectCommand = "getTempCustNo";
DataView reader = (DataView)dsSelect.Select(DataSourceSelectArguments.Empty);
Session["CustNo"] = reader[0]["CustNumber"].ToString().Trim();
Session["PriceCode"] = reader[0]["PriceCode"].ToString().Trim();
Session["orderNo"] = reader[0]["OrderNo"].ToString().Trim();
My stored procedure is here:ALTER PROCEDURE [dbo].[getTempCustNo]
AS
BEGIN
declare @CustNo int;
declare @prodDesc VARCHAR(max);
declare @prodNo int;
declare @stdPrice float;
declare @orderNo int;
declare @priceCode int;
-- populate values
SELECT @custNo = ISNULL(MAX(OD_CUSTNO)+1, 100000000), @prodNo = 999, @orderNo = 1, @priceCode = 1000
FROM [dbo].[tblOrderDet]
WHERE OD_CUSTNO >= 100000000;
-- get the price of our product
SELECT @stdPrice = PR_RATE_1
FROM tblPrices
WHERE PR_PRODNO = @ProdNo
AND PR_RCDCOD = @priceCode;
-- get the description
SELECT @ProdDesc = PM_PRDESC + ' ' + PM_VOLUME FROM dbo.tblPromas WHERE PM_PRODNO = @ProdNo;
--Add a delivery charge to the customer's order table
INSERT INTO tblOrderDet (OD_ORDRNO, OD_CUSTNO, OD_PRODNO, OD_QUANTITY, OD_ORG_QUANTY, OD_PRICE, OD_DESCR, OD_LOW)
VALUES (@orderNo, @CustNo, @prodNo, 1, 0, @stdPrice, @prodDesc, 'N');
--Return the customer values
SELECT @custNo AS 'CustNumber', @orderNo AS 'OrderNo', @priceCode AS 'PriceCode';
END
View 3 Replies
View Related
Oct 22, 2007
---------------------------------------------------------------
My Original Post
I have to query n table(NLRImports) using the Distinct keyword, to retrieve a set of ID numbers. ( "Select DISTINCT id_nbr from NLRImport" ).
Now i want to use those values i retrieved, to process the records in the table(NLRImports) 1 by 1. How do i use those ID no's i retrieved as Variables or parameters for my next query?? If this makes sense?
----------------------------------------------------------------
First, thanks for the response.... now here is what im trying to do.
I created a simple application in delphi to import information to a table in MSSql2005. This is some of the resulting columns...
date | id_nbr | account_nbr | sub_account_nbr | ... etc
-------------------------------------------------------------
Now there will be several entries with the same id no but on different dates, so i take it dates would rather be my pkey.
Then i need to take one person's entries(i work on id_nbr) and go thru all the entries taking the earliest date and comparing all the other entries for that person to the first date and select all the dates more than 19 days after the first date and less than 91 days from first date and place it in a new table.
I used cursor s and while loops to kind of get it going but i know that cursors are not really recommended use but the performance implications dont bother with this particular job.
What other ways should i be using to accomplish this?
thanks, i hope this is clear...
View 1 Replies
View Related
Feb 20, 2003
I have seen this done by viewing code done by a SQL expert and would like to learn this myself. Does anyone have any examples that might help.
I guess I should state my question to the forum !
Is there a way to call a stored proc from within another stored proc?
Thanks In Advance.
Tony
View 1 Replies
View Related
Jan 13, 2006
Hi all,
I have a stored procedure "uspX" that calls another stored procedure "uspY" and I need to retrieve the return value from uspY and use it within uspX. Does anyone know the syntax for this?
Thanks for your help!
Cat
View 5 Replies
View Related
Jan 20, 2004
Hi all
I have about 5 stored procedures that, among other things, execute exactly the same SELECT statement
Instead of copying the SELECT statement 5 times, I'd like each stored proc to call a single stored proc that executes the SELECT statement and returns the resultset to the calling stored proc
The SELECT statement in question retrieves a single row from a table containing 10 columns.
Is there a way for a stored proc to call another stored proc and gain access to the resultset of the called stored proc?
I know about stored proc return values and about output parameters, but I think I am looking for something different.
Thanks
View 14 Replies
View Related
Aug 30, 2007
I would like to know if the following is possible/permissible:
myCLRstoredproc (or some C# stored proc)
{
//call some T SQL stored procedure spSQL and get the result set here to work with
INSERT INTO #tmpCLR EXECUTE spSQL
}
spSQL
(
INSERT INTO #tmpABC EXECUTE spSQL2
)
spSQL2
(
// some other t-sql stored proc
)
Can we do that? I know that doing this in SQL server would throw (nested EXECUTE not allowed). I dont want to go re-writing the spSQL in C# again, I just want to get whatever spSQL returns and then work with the result set to do row-level computations, thereby avoiding to use cursors in spSQL.
View 2 Replies
View Related
Oct 14, 2007
I am calling a stored procedure (say X) and from that stored procedure (i mean X) i want to call another stored procedure (say Y)asynchoronoulsy. Once stored procedure X is completed then i want to return execution to main program. In background, Stored procedure Y will contiue his work. Please let me know how to do that using SQL Server 2000 and ASP.NET 2.
View 3 Replies
View Related
Apr 23, 2008
Hello friends......How are you ? I want to ask you all that how can I do the following ?
I want to now that how many ways are there to do this ?
How can I call one or more stored procedures into perticular one Stored Proc ? in MS SQL Server 2000/05.
View 1 Replies
View Related
Dec 18, 2007
Hi Peeps
I have a SP that returns xml
I have writen another stored proc in which I want to do something like this:Select FieldOne, FieldTwo, ( exec sp_that_returns_xml ( @a, @b) ), FieldThree from TableName
But it seems that I cant call the proc from within a select.
I have also tried
declare @v xml
set @v = exec sp_that_returns_xml ( @a, @b)
But this again doesn't work
I have tried changing the statements syntax i.e. brackets and no brackets etc...,
The only way Ive got it to work is to create a temp table, insert the result from the xml proc into it and then set @v as a select from the temp table -
Which to be frank is god awful way to do it.
Any and all help appreciated.
Kal
View 3 Replies
View Related
Aug 23, 2007
When you create a Stored procedure, is it automatically stored under the default Filegoup?
How can I see under which Filegroup my Stored Procedures and Triggers are stored?
View 2 Replies
View Related
Mar 10, 2005
I didn't want to maintain similar/identical tables in a legacy FoxPro system and another system with SQL Server back end. Both systems are active, but some tables are shared.
Initially I was going to use a Linked Server to the FoxPro to pull the FP data when needed. This works. But, I've come up with what I believe is a better solution. Keep in mind that these tables are largely static - occassional changes, edits.
I will do a 1 time DTS from FP into SQL Server tables.
I then create INSERT and UPDATE triggers within FoxPro.
These triggers fire a stored procedure in FoxPro that establishes a connection to the SQL Server and fire the appropriate stored procedure on SQL Server to CREATE and/or UPDATE the corresponding table there.
In the end - the tables are local to both apps.
If the UPDATES or TRIGGERS fail I write to an error log - and in that rare case - I can manually fix. I could set it up to email me from within FoxPro as well if needed.
Here's the FoxPro and SQL Server code for reference for the Record Insert:
FOXPRO employee.dbf InsertTrigger:
employee_insert_trigger(VAL(Employee.ep_pk),Employ ee.fname,Employee.lname,Employee.email,Employee.us er_login,Employee.phone)
FOXPRO corresponding Stored Procedure:
FUNCTION EMPLOYEE_INSERT_TRIGGER
PARAMETERS wepk,wefname,welname,weemail,WEUSERID,WEPHONE
nhandle=SQLCONNECT('SS_PDITHP3','userid','password ')
IF nhandle<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nhandle<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
RETURN
ENDIF
nquery="exec ewo_sp_insertNewEmployee @WEPK ="+STR(wepk)+",@WEFNAME ='"+wefname+"',@WELNAME ='"+welname+"',@WEEMAIL ='"+weemail+"',@WEUSERID ='"+weuserid+"',@WEPHONE='"+wephone+"',@RETCODE =0"
nsucc=SQLEXEC(nhandle,nquery)
SQLDISCONNECT(nhandle)
IF nSucc<0
m.errclose=.f.
IF !USED("errorlog")
USE tisdata!errorlog IN SELECT(1)
m.errclose=.t.
ENDIF
SELECT errorlog
INSERT INTO errorlog (date, time, program,source,user) ;
values (DATE(), TIME(), 'EMPLOYEE_INSERT_TRIGGER','nSucc<0 PARAMS: '+STR(wepk)+wefname+welname+weemail+WEUSERID+WEPHO NE,GETENV("username"))
IF m.errclose
USE IN errorlog
ENDIF
ENDIF
RETURN
SQL SERVER Stored Procedure called from FOXPRO Stored Procedure
CREATE procedure ewo_sp_insertNewEmployee (
@WEPK int,
@WEFNAME char(20),
@WELNAME char(20),
@WEEMAIL char(50),
@WEUSERID char(15),
@WEPHONE char(25),
@RETCODE int OUTPUT
)
AS
insert into WO_EMP (
WE_PK,
WE_FNAME,
WE_LNAME,
WE_EMAIL,
WE_USERID,
WE_PHONE
)
VALUES (
@WEPK,
@WEFNAME,
@WELNAME,
@WEEMAIL,
@WEUSERID,
@WEPHONE
)
IF @@ERROR <> 0
BEGIN
SET @RETCODE=@@ERROR
END
ELSE
BEGIN
-- SUCCESS!!
SET @RETCODE=0
END
return @RETCODE
GO
View 2 Replies
View Related
Jul 19, 2007
Im trying to perform an update with a stored procedure thats all working but
an exception is thrown ....violation of primary key contraint....cannot insert duplicate pri key
I understand whats going on but how do you update some ones details if its protected this way.
?
View 3 Replies
View Related
Feb 22, 2008
I have a stored procedure , where i want to return identity column after insert but before insert i want to check if the record exist then select its identity value to return , after select statement it is retutrning null CREATE PROCEDURE SP_Attendance1 (@DIVISIONID int,@EMPLOYEEID int,@CALLDATE datetime,@RECEIVEDDATE datetime,@DOC datetime,@SYSTEMNAME VARCHAR(20),@DELETED int,@attendanceID int output) AS---DECLARE @ID intIF EXISTS (SELECT ID FROM TBLATTENDANCE WHERE EMPLOYEEID = @EMPLOYEEID AND YEAR ( CALLDATE ) = YEAR ( @CALLDATE)AND MONTH (CALLDATE) = MONTH ( @CALLDATE) AND DAY (CALLDATE) = DAY ( @CALLDATE) )BEGIN SET @attendanceID = SCOPE_IDENTITY()END ELSE BEGIN INSERT INTO TBLATTENDANCE (DIVISIONID ,EMPLOYEEID ,CALLDATE , RECEIVEDDATE ,DOC,SYSTEMNAME ,DELETED )VALUES (@DIVISIONID ,@EMPLOYEEID ,@CALLDATE , @RECEIVEDDATE ,@DOC,@SYSTEMNAME ,@DELETED ) ;SELECT DIVISIONID, EMPLOYEEID, CALLDATE, RECEIVEDDATE, DOC, SYSTEMNAME, DELETED,ID FROM TBLATTENDANCE WHERE (ID = SCOPE_IDENTITY())SELECT @attendanceID = SCOPE_IDENTITY()ENDGO Kindly help with this
View 5 Replies
View Related
Jan 15, 2004
Hi,
I am trying to create a stored proc, that delivers a recordset, per the user requirements BUT,
I want to create a Geneirc search Proc that can handle a few criteria
I was wondering if it is possible to create a VB like Select case
depending on Information supplied to the stored proc
i.e
@Loc_Thing
@Loc_OtherThing
SELECT FirstName,LastName,CIty,Job,,Company,Webpage FROM RECORDSET WHERE
Select case @Loc_Thing
Case "Mickey"
LastName = @Loc_OtherThing
Case "Walt"
Company = @Loc_OtherThing
...... etc
is it possible to create a strored proc like this?
I have found a Select case in SQL, but it doesn't work I would like it?
Any Idea's?
View 1 Replies
View Related
Nov 29, 2004
Hello,
So I created my first SP today which returned data to populate a datagrid. Worked to perfection. Now I'm trying to do a simple login and I'm having a hard time getting it together. I want the user to enter in a username and pass then if user exists, to return their userid and update their last login date. But I can't get it. Any help would be awesome.
Here's my SP...
CREATE PROCEDURE [dbo].[userLogin] @username varchar(50), @pass varchar(50) AS
declare @x int
declare @userid int
if exists (SELECT userid FROM users WHERE username = @username AND password = @pass)
set @x = 1
else
set @x = 0
if @x = 1
UPDATE users SET lastlogin = getdate() WHERE userid = (SELECT userid AS name FROM users WHERE username = @username AND password = @pass)
else
return '0'
if @x = 1
SET @userid = (SELECT userid FROM users WHERE username = @username AND password = @pass)
return @userid
GO
Any constructive criticism on my SP is welcome. Also, should I be using Print or Return if I want to send back a value to my VB code?
And my VB:
Dim user As String = txtUsername.Text
Dim pass As String = txtPassword.Text
Dim objDataSet As DataSet
Dim objAdapter As SqlDataAdapter
Try
Dim cmd As New SqlCommand
'Enter Param's here
Dim myParam1 As SqlParameter = cmd.Parameters.Add("@username", SqlDbType.VarChar)
Dim myParam2 As SqlParameter = cmd.Parameters.Add("@pass", SqlDbType.VarChar)
myParam1.Value = user
myParam2.Value = pass
objAdapter = New SqlDataAdapter
objAdapter.SelectCommand = cmd
objAdapter.SelectCommand.Connection = SqlConn
objAdapter.SelectCommand.CommandType = CommandType.StoredProcedure
objAdapter.SelectCommand.CommandText = "userLogin"
SqlConn.Open()
Dim str As String = cmd.Parameters("@userid").Value()
cmd.ExecuteNonQuery()
If str = "0" Then
'Error Login Page
Response.Redirect("login_err.aspx")
Else
Session("userid") = str
Response.Redirect("home.aspx")
End If
SqlConn.Close()
Catch ex As SqlException
SqlConn.Close()
End Try
View 4 Replies
View Related
Feb 13, 2006
I have 2 tables, lets say: Table1 and Table2.
Table1 has an ID field that is unique (PK).
Table2 has the same ID field and a date field which are both
unique (PK, FK)
I need to write a stored procedure that will query the ID
field from table1 like
Select distinct(id) from Table1
Would return:
ID
1
2
3
4
5
Now on the first of every month I want a job to run that
would create a new record for EACH ID from the above query. The new record would be created in Table2
with the ID and a date (that I will determine), resulting in:
ID DATE
1 01/01/06
2 01/01/06
3 01/01/06
4 01/01/06
5 01/01/06
The following month, after running it again, the table would
look like:
ID DATE
1 01/01/06
1 02/01/06
2 01/01/06
2 02/01/06
3 01/01/06
3 02/01/06
4 01/01/06
4 02/01/06
5 01/01/06
5 02/01/06
I have no idea how to “loop� through this record set for
each record in Table1 and in turn insert into Table2.
View 2 Replies
View Related
Mar 30, 2006
I have a current stored proc that creates records based on
certain criteria. One of the fields I
have is a SmallDateTime field. To
populate this from my stored proc, I have this code (for this one field).
SELECT @myLeaveDate = CAST(STR(MONTH(getdate()))+'/'+STR(01)+'/'+STR(YEAR(getdate())) AS DateTime)
This always creates a record for the 1st of the
current month. This works fine as is. After it runs I can look at the table and it
creates dates that look like the following: “2/1/2006� -Notice it doesn’t have
any minutes, seconds, etc.
Now what I need is to do something similar in another field
which is also SmallDateTime, BUT I want the date to be for the 10th day
of the following month.
I got this working using dateadd, but it also appends the minutes, seconds,
etc.
View 1 Replies
View Related
May 9, 2001
Can I call a sp from within a sp ?
Is this a fairly normal practice ?
Thanks,
Ivan
View 2 Replies
View Related
Sep 15, 1999
Can someone help us with this stored proc.
We need the maxccid -1 to be passed as a value.
Here is the proc.
CREATE PROCEDURE NewBillingInfo
@int_acct_id char (10)
@cc_nickname varchar (20),
@cc_zip varchar (20),
@cc_name varchar (100),
@cc_num varchar (20),
@cc_typ varchar (20),
@cc_month char (2),
@cc_year char (4)
as
set nocount off
declare @maxaddrid int
declare @maxccid smallint
/* BEGIN ENCRYPT DATA*/
exec encrypt @cc_zip output, @cc_zip
exec encrypt @cc_name OUTPUT, @cc_name
exec encrypt @cc_num OUTPUT , @cc_num
exec encrypt @cc_typ OUTPUT, @cc_type
exec encrypt @cc_month OUTPUT, @cc_month
exec encrypt @cc_year OUTPUT, @cc_year
BEGIN TRAN
/* get max credit card id for customer and add 1 */
SELECT @maxccid = Max(int_cc_id) from CusCredit where int_acct_id = @int_acct_id
if @maxcced is null
SELECT @maxccid = -1
SELECT @maxccid = @maxccid + 1
INSERT INTO CusCredit
(int_acct_id, int_cc_id, cc_name, cc_num,
cc_typ, cc_month, cc_year, cc_zip, cc_nickname)
VALUES
(@int_acct_id, @maxccid, @cc_name, @cc_num,
@cc_type, @cc_month, @cc_year, @cc_zip, @cc_nickname)
if @@ROWCOUNT < 1
BEGIN
ROLLBACK TRAN
RETURN 103
end
COMMIT TRAN
RETURN
GO
If someone could take a minute and look at this I would be so grateful.
Thanks Dianne Watson
View 1 Replies
View Related
Nov 29, 2000
I made a strored proc and I receive my like condition in parameter. The like condition must be in '' like (... like 'a%'). I'm sure that it's just a question of apostrophe.
for example:
declare @Command varchar(8000)
declare @Compagnie varchar(100)
select @Compagnie = 'Tonna%'
select @Command = 'SELECT distinct [Site Status].DISTRIBUTION, [Site Status].CC FROM [Site Status] WHERE [Site Status].CC like ' +@Compagnie
execute (@Command)
how can i write that @Compagnie is in apostrophe
thanks
View 1 Replies
View Related
Feb 16, 2004
Hi,
Anybody has Document for Stored procedure coding standard for best performance.
I know that I can able get in BOL and sql-server-performance.com just wanted know if anybody had info other than this.
Thanks,
Ravi
View 1 Replies
View Related
Aug 28, 2002
I want to generate getdate without the timestamp, only the date. Any ideas. Datepart will not convert to varchar as needed within this proc.
View 2 Replies
View Related
Jun 20, 2001
One of the columns I am inserting into may or may not contain sensitive data. If the "type" parameter supplied with the proc. execute statement is of a specific value I need to utilize an encryption function (and a data type conversion) on the following column which is the actual value parameter. If the type does not meet the specific criteria the encryption/conversion for the value parameter.
Any syntax assist would be greatly apprciated.
View 2 Replies
View Related
Jul 17, 2004
I want to determin if a user belongs to a certain group or not within a stored proc:
CREATE PROCEDURE usp_General_IsEstimator
@cLogin sysname,
@bEstimator bit
AS
DECLARE groups CURSOR FOR EXEC sp_helpuser @cLogin
What I was planning on doing is to see if the user login returns the 'Estimating' group name using the sp_helpuser. If so, set @bEstimator = 1 else 0
How can I accomplish this?
I cannot use the cursor with the stored proc. How do I work with the recordset returned by the stored proc?
Any ideas?
Mike B
View 2 Replies
View Related
Oct 31, 2004
Hi,
Could any one please help me in creating sp.
It should accept one input parameter. when you pass value 1 to this parameter it should show all odd numbers from 1 to 100 and when you pass value 2 it should show all even numbers from 1 to 100.
Thanks in advance.
-ss
View 14 Replies
View Related
