Does anyone happen to know if it is possible to set a custom data flow component property to be non-browsable? I have a number of custom component properties, and would prefer that they only be updateable through my custom UI as opposed to via the property grid on the SSIS designer,
thanks
Hi,
I am creating a custom transformation component, and a custom user interface for that component.
In
my custom UI, I want to show the custom properties, and allow users to
edit these properties similar to how the advanced editor shows the
properties.
I know in my UI I need to create a "Property Grid".
In
the properties of this grid, I can select the object I want to display
data for, however, the only objects that appear are the objects that I
have already created within this UI, and not the actual component
object with the custom properties.
How do I go about getting the properties for my transformation component listed in this property grid?
I am writing in C#.
Hi,
I've created a Custom Data Flow Component and added some Custom Properties.
I want the user to set the contents using an expression. I did some research and come up with the folowing:
Code Snippet
IDTSCustomProperty90 SourceTableProperty = ComponentMetaData.CustomPropertyCollection.New();
SourceTableProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
SourceTableProperty.Name = "SourceTable";
But it doesn't work, if I enter @[System:ackageName] in the field. It comes out "@[System:ackageName]" instead of the actual package name.
I'm also unable to find how I can tell the designer to show the Expression editor. I would like to see the elipses (...) next to my field.
Any help would be greatly appreciated!
Thank you
I am attempting to set my custom properties in the UI I have created for my custom transformation. I can access them in the ProcessInput, but if I try to assign them a new value in my UI the values dont change.
I set the properties up in ProvideComponentProperties
public override void ProvideComponentProperties()
{
// Perform component setup operations
ComponentMetaData.UsesDispositions = false;
// Add Input
IDTSInput90 input = ComponentMetaData.InputCollection.New();
input.Name = "TrimInput";
input.ErrorRowDisposition = DTSRowDisposition.RD_NotUsed;
// Add Output
IDTSOutput90 output = ComponentMetaData.OutputCollection.New();
output.Name = "TrimOutput";
output.SynchronousInputID = input.ID;
IDTSCustomProperty90 Trimproperty = ComponentMetaData.CustomPropertyCollection.New();
Trimproperty.Name = "Trim Values";
Trimproperty.Description = "Selected Trim Values";
IDTSCustomProperty90 Colproperty = ComponentMetaData.CustomPropertyCollection.New();
Colproperty.Name = "Col Names";
Colproperty.Description = "Column Names";
}
btn Click event in UI form
IDTSCustomProperty90 Trimproperty = _dtsComponentMetaData.CustomPropertyCollection["Trim Values"];
Trimproperty.Value = sConcatTrim;
IDTSCustomProperty90 Colproperty = _dtsComponentMetaData.CustomPropertyCollection["Col Names"];
Colproperty.Value = sConcatColNames;
Any suggestions or please point me to any example would be greatly appreciated.
Hi everyone!
How do I create my own descriptions as shown in the buttom of the Properties pane in Visual Studio 2005 when I create a Custom Task?
Thanks in advance!
Hello to everyone, I've a question about UDTs and the way I can use them to access tables and columns where they are applied in a SQL Server 2005 DB.
I've already spent 2 days googling and MSDN reading but nothing helped me to solve my problem, thats why I'm posting it here (this is the second post, maybe the last one was in the wrong Forum).
The scenario follows:
I've created a UDT called MyUDT that exposes 2 properties MyTable, MyColumn, here its the code:
[Serializable]
[SqlUserDefinedType(Format.UserDefined, IsByteOrdered = true, MaxByteSize = 8000, Name = "MyUDT")]
public class MyUDT : INullable, IBinarySerialize
{
private string _myTable;
private string _myColumn;
....
/// <summary>
/// Set or Get the Table Name where the UDT is applied.
/// </summary>
public string MyTable {
get { return this._myTable; }
set { this._myTable = value; }
}
/// <summary>
/// Set or Get the Table's Column Name where the UDT is applied.
/// </summary>
public string MyColumn
{
get { return this._myColumn; }
set { this._myColumn = value; }
}
....
}
And here it's my question/s:
How can I expose the defined Properties (MyTable, MyColumn) in order to be directly used from
SQL Server Management Studio within the Column Properties Panel?
Pls take a look to the print screen placed below:
[img=http://img81.imageshack.us/img81/7193/untitledip1.th.jpg]
If it is not possible, is there a way for any UDT to get back from the sql server execution context
the table and the column where it is applied/used?
I need to solve that in order to later retrieve via SQL the Extended Table Properties where the UDT is used
and make some work on presented MetaData. Thanks in advance, every answer/help will be very much appreciated.
I'm building a custom component and UI and am a bit confused on where I
need to create and/or set custom column
properties?
My UI will have a datagrid with three
columns: 1) a check box to select a column for use by the component, 2)
the input column name, and 3) a "differentiator" checkbox that indicates
an extra property about some of the columns that have the first column
checkbox checked (For example, my component may be using five input columns, but
three of those need to be used in a slightly different
way.)
The problem is, I don't understand when or
where I'm supposed to create the custom property for the input
column. SetUsageType is where I've been thinking, but I don't
know if I'm supposed to be creating it for an input column or a virtual
input column. I'd appreciate any guidance.
Hi,
I saw some thing called custom properties for the "Derived transformation" in the msdn site. I tried to use them in a simple package, but I am getting an error as "can't write to derivedoutputcolumnname.friendlyexpression". Friendly expression is one of the custom properties available for the derived transformation output columns.
The steps I followed to get to this error are as follows:
1) Get data from a table using OLEDB Source. Suppose I am getting firstName, LastName etc.
2) Derived column input is values from the above OLEDB Source.
3) I have added a new column called "Concatenated name" which is concatenated value of first and last names.
4) Then in the properties editor of this data flow task in expressions option I clicked on ellipse available. I got an editor for property expression, which contained two columns called "Property" and "Expression". Property column contains dropdown with friendly expressions propety for the derived columns and expression column is a text box, where in we can enter expression to be evaluated for the corresponding friendly expression property.
5) Now when I click on OK and try to debug it gives an error as "Can't write to concatenatedname.friendlyexpresiion".
If anybody has already faced this problem and solved it please let me know, because I am struck here a long time.
Thanks&Regards,
Sreekanth Ammisetty
Is there a way of disabling a custom property in a component so that during design-time the property is grayed out? I looked around the properties of IDTSCustomProperty90 and nothing sticks out.
Thanks
Mike
Ok, so I've looked near and far and have found nothing but info that says data flow properties can not be changed at runtime....then I see in this in the SSIS documentation under ADO.NET Source Custom Properties:
View 15 Replies View RelatedI have a custom component that takes in unicode stream and converts it to ascii text. However I would like to make my default string length and code page editable in the standard GUI editor. Right now I can set the default to 1000 characters, but when I try to change it, it says "Property value is not valid"
Any ideas?
Thanks!
Ive been using SSIS for a month or two and now find I need to create some custom tasks to perform some performance logging. in the the overloaded ProviderComponentProperties section I am trying to create a property which has the same look as the Expressions properties you find elsewhere (Little + on the left and a group of sub properties when expanded).
Ive have played with creating a IDTSCustomPropertyCollection90 collection then adding my sub properties to it but I cant seem to then add my new collection to the ComponentMetaData.CustomPropertiesCollection.
Im assuming the Expressions parameter is a collection added to the properties collection but I cant figure out how. Any help would be much appreciated.
Hello All Experts,
I have created one custom task with PropertyGrid Control and two button on it. I have everything under one class library project.
Problem I am facing is when i load task and clik on Edit I can not see those properties into that GUI and even functionlity of those two buttons (OK and Cancel) not working but I am able to see those properties in default property window.
If I create this GUI as a seperate window application then I am able to see those properties in GUI and buttons also working but in SSIS I am not able to load the task.
After reading on internet about SSIS they suggest to create everything under one project which I did.
Basically I am trying to populate connection managers like Source Connection and Destination Connection when I load this task and there are much more backend functionlity but at first step i m stuck and not able to see those properties in GUI.
Please help and give your input on it. I was following "Increment Task" example given by MSDN.
If you need more info let me know.
Thanks
Hello,
I'm working on a custom dataflow destination component. It makes use of the External Metadata Collection. I also use Custom Properties with the external metadata collection.
When I open the destination component using the Advanced Editor, and select an External Metadata Collection and change the Custom Property it always changes back to the original value.
Additionally the method SetExternalMetadataColumnProperty never gets called.
Here is a little Test Component that surfaces the problem:
[DtsPipelineComponent(ComponentType=ComponentType.DestinationAdapter, DisplayName="Test Destination")]
public class Class1 : PipelineComponent
{
public override void ProvideComponentProperties()
{
base.ProvideComponentProperties();
ComponentMetaData.InputCollection.RemoveAll();
IDTSInput90 input = ComponentMetaData.InputCollection.New();
input.Name = "Name";
input.ExternalMetadataColumnCollection.IsUsed = true;
IDTSExternalMetadataColumn90 ext = input.ExternalMetadataColumnCollection.New();
ext.Name = "ExtName";
IDTSCustomProperty90 customProp = ext.CustomPropertyCollection.New();
customProp.Name = "Custom Property";
customProp.Value = "Hallo";
}
public override IDTSCustomProperty90 SetExternalMetadataColumnProperty(int iID, int iExternalMetadataColumnID, string strPropertyName, object oValue)
{
return base.SetExternalMetadataColumnProperty(iID, iExternalMetadataColumnID, strPropertyName, oValue);
}
}
Any ideas how to make that work?
Georg
I implemented a custom source adaptor. I want to be able to associate custom properties with each of the output columns. I want them to be passed downsteam. The idea is to be able to retrieve these information in a downstream custom transformations of ours and process the various columns accordingly. How do I go about doing this?I noticed that the IDTSCustomProperty90 seems to have a local scope only.
View 1 Replies View RelatedHI,
I need to open a File through File connection manager and want to assign these file properties to SSIS precreated varibale or Newly created varibale. I want to show file properties in Propertygrid. Properties grid will conatin File Propeties Column and SSIS varibale Combobox column. The combo box will contain New variable field. When user select New Variable field, then a new SSIS varibale window will open and we can able create New variable and that Newly created variable should add to that property comboBox.
For Instance if we create a new varibale Name "Creationdate" by clicking on New Varible in ComboBox, then that CreationDate variable should add to Property ComboBox in PropertyGrid. After adding when we select that variable Name "Creationdate" then that selected file Creation date should assign to SSIS varibale "Creationdate" field.
Any Comments or sample will help me.
Nitin
I have an ODBC connection string that is working fine with the following properties:
Database="XXXXXXX",Network="YYYYYY"; strangely no server is specified in the string, but it is specified in the ODBC Connection file.
I am trying to do a new server registration in SSMS for this database.However, I don't understand where the network spec is placed.
Under Registered server name I've tried:
YYYYYYXXXXX
When I browse the server for the database instance list, I receive "network path was not found".
I even tried:"XXXXXXX",Network="YYYYYY" for the registered server name.Same error message.
What am I doing wrong ?
Hi,
I'm trying to enable Expression for a custom property in my custom data flow component.
Here is the code I wrote to declare the custom property:
public override void ProvideComponentProperties()
{
ComponentMetaData.RuntimeConnectionCollection.RemoveAll();
RemoveAllInputsOutputsAndCustomProperties();
IDTSCustomProperty90 prop = ComponentMetaData.CustomPropertyCollection.New();
prop.Name = "MyProperty";
prop.Description = "My property description";
prop.Value = string.Empty;
prop.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
...
}
In design mode, I can assign an expression to my custom property, but it get evaluated in design mode and not in runtime
Here is my expression (a file name based on a date contained in a user variable):
"DB" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + "\" + (DT_WSTR, 4)YEAR( @[User::varCurrentDate] ) + RIGHT( "0" + (DT_WSTR, 2)MONTH( @[User::varCurrentDate] ), 2 ) + ".VER"
@[User::varCurrentDate] is a DateTime variable and is assign to 0 at design time
So the expression is evaluated as: "DB189912189912.VER".
My package contains 2 data flow.
At runtime,
The first one is responsible to set a valid date in @[User::varCurrentDate] variable. (the date is 2007-01-15)
The second one contains my custom data flow component with my custom property that was set to an expression at design time
When my component get executed, my custom property value is still "DB189912189912.VER" and I expected "DB200701200701.VER"
Any idea ?
What I want to accomplish is that at design time the designer can enter a value for some custom property on my custom task and that this value is accessed at executing time.
View 10 Replies View RelatedI am writing a custom task that has some custom properties. I would like to parameterize these properties i.e. read from a varaible, so I can change these variables from a config file during runtime.
I read the documentation and it says if we set the ExpressionType to CPET_NOTIFY, it should work, but it does not seem to work. Not sure if I am missing anything. Can someone please help me?
This is what I did in the custom task
customProperty.ExpressionType = DTSCustomPropertyExpressionType.CPET_NOTIFY;
In the Editor of my custom task, under custom properties section, I expected a button with 3 dots, to click & pop-up so we can specify the expression or at least so it evaluates the variables if we give @[User::VaraibleName]
Any help on this will be very much appreciated.
Thanks
is there anyway to retrieve the database properties and display in an asp.net web form as a quick over view rather than logging onto the server to check, items such as size, space available, last backup data etc? Cheers
View 2 Replies View RelatedHi and thanks for your help
specifying the default database means what. for instance when I add alog in user and I have to choose a default database. Does it make a difference if the Default database is Master or any other user database name. What is the significant to select Master vs any other database.
Thanks,
Ahmed
Hello!
We are having problems with a single SQL Server where the Server properties will not save, and always revert to the default.
It occurs only on those tabs with "configured" and "running" options at the bottom. Other tabs will keep the settings we custom.
The big problem is with the memory and processor tabs which even when we've made only a single change and stopped and started the service, reverts back to a default.
Any clues - we are logged in as "sa" and have not removed the SA priviledges.
Thanks for any help,
Simon
Once upon a time, I went to check the properties of an instance and EM just hung - anyone know why this might happen?
View 1 Replies View RelatedHi all,
Plz help me to know whats wrong with following script:
EXEC sp_addextendedproperty
@name = 'col_Programs_ID_Description',
@Value = 'The Unique Identifier for a specific Program',
@level1Type = 'Programs',
@level2Type = 'ID'
I get the following error:
Server: Msg 15600, Level 15, State 1, Procedure sp_addextendedproperty, Line 42
An invalid parameter or option was specified for procedure 'sp_addextendedproperty'.
NOTE: If I dont use the last 2 parameters this procedure runs fine, but it adds the Extended Property to the Database Level while I'm trying to add it to the TABLE-->COLUMN level.
Thanks
Mariah
Hi all,
I'm having a problem need your help:
I can see all properties of datafile (FilegroupName, FileID, FileType,
Location, CurrentSize, Space Used) by Enterpise Manager.
Please tell me how do I see all those properties by SQL Query Analyzer.
I want to know actual space used in data file to shrink file.
Thanks in advanced,
TN
Running SQL2000 SP3.
We installed an application named Streamserve. Now, if I go into Enterprise Manager I can expand the databases fine. But when I try to right-click properties Enterprise Manager goes bye bye. No error messages. I tried this on master and same thing. I currently have 2 different machines - a dev and a QA box and both are behaving badly.
Any ideas?
Thanks
Sharon
Hi,
when ever I try to look at the properties of a job, the create new job window appears. what gives?
When I create a new database it asks for information regarding the Data files.
What is it for? Will this file get creted to the location that I write?
How often will it get copied there?
Help;Im New with a company and the sql server ismaxing out the cpu'sWe have 3 web servers load balanced....large volume of datathe current PropertiesComputer:4 amd 2.88 processors4 g MememoryRecomendations of good sql setupmemory, cpu etcThank youmike
View 6 Replies View RelatedHas anyone tried to open a cube into Business Intelligence Studio and the properties for the database vanished (project menu, properties)?
How do you get them back?
Hello
Im having abit off trouble with my images positioning..
I have 3 images in the header placed side by side with a rectangle around them sent to the back
In layout view the images look correct, however when i deploy the report the rectangle appears on top and then the images appear undernealth each other...when they should be inside the rectangle. is there something like float on top properties similar to objects in Word?
A separate question, I also have a table to the right off the table i have an image and under that image another image...when i preview the report the second image is pushed to the bottom of where the table ends...is there someway to make the image appear side by side to the table instead off getting pushed down to the bottom...something similar to a frame in HTML ?
thanks
Hi.
I am trying to look for ways on how to get all the databse properties under each instance.
say I want to view the size, recovery model, physical location, etc.
The sys.database_files is only applicable per database. Is there a query, or a table in master database to get these or store these values?
thanks...