Does anyone out there have any ideas on the best way to connect in integration services to a nonstop sql database running on a tandem computer? We have some odbc drivers that have proven to be problematic and slow to use. What oledb products I can find apparently come with something that's around $36K per processor to buy. Thanks.
View 1 RepliesI have one data pump in a series that was pumping in too many records. Doing an independent query of the source table, I found there was about 140,000 records. My pump uses a variable for the source query, nothing fancy just a simple SELECT * FROM table WHERE DateField > '4/6/2006 12:00:00AM'. The Destination is local on the SQL Server and is set by a variable, and does a fast load. When I went away and checked in BIDS while it was running (the data flow tab where you can see the record count) it was at 28,000,000 and still going!
Any ideas what could be causing this? As I say there are only 140,000 records and no joins in the query--is this a bug someone has run into before?
Thanks,
Kayda
have developed a report on a test server which I can access from i./e. http://localhost/reports
DataSourcce is accessed using a sql login
My colleague on his machine can not access. His error is:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'MarketAnalytics'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Hi everyone,
I have one problem with my reports. I have one Cube and every week, we process the cube to recalculate the measures.
Before, my report can be displayed with any problem but know, since we process the cube, we can't see the reports based on the cube.
The errors display in the report manager are :
rsProcessingAborted and
rsErrorOpeningConnection.
When i try to access the report directly from my local project thanks to visual studio, the reports works well.
I think that it may be a problem of rights and abilitations. Or maybe it'a an IIS problem ? Or a firewall problem ?
Thanks for your response.
Shaouk.
Hi All,
I need to write a report which will run based on the user's input for Server Group. Meaning, if the user wants the report to be run for one say, UAT group, the report (and therefore the stored procedure) should be executed against UAT server. Or, if the user wants it to be run on the Production machine, the stored procedure should be executed on the Production Server. Assume that both UAT and Production servers are in the same domain to rule out any authentication issue.
I think one way of doing it is to create a linked server on one server which we use to connect via the Report Manager. So, whatever Server Group is selected based on that the SP will be executed on that respective Server Group's Server, since in the query we will have given full names of the tables that we use.
But, I strongly suspect, that having linked servers will not be accepted since it requires that the server owners maintain that. So, I was thinking if there is any other way of achieving this. If anyone knows, please help me with this.
Thanks a lot and let me know if the question is not clearly stated.
Manoj.
Hello, I Created a report with reportbuilder, after clicking on Run Report I got this message, Its very strange it seems that its trying to generate or create a datasource.
Para obtener más información acerca de este error, vaya al servidor de informes en el equipo del servidor local o habilite los errores remotos
----------------------------
No se puede crear una conexión al origen de datos 'dataSource1'.
----------------------------
Error al procesar el informe.
We're having some issues with where our backups write to, so I've been watching and monitoring the performance, when I noticed today that restore labelonly from disk has been running almost non stop for the past few hours.
The account running the query is the SQL Server's service account, and the program is "Microsoft SQL Server".
Every minute or so the SPID changes which made me think it was related to the transaction logs, the "restore labelonly" runs for as long as each database in the transaction log backup.
Example: Database A transaction log backup takes 1 minute and the SPID XX for restore labelonly runs 1 minute
Database B transaction log backup starts and there is a new SPID for restore labelonly.
I hope this makes sense because I normally don't see this restore labelonly running.
Hai All..
I have develop any report in reporting services on server Development. i deploy my report to server production.
i have connection to cube as data source. if open report manager in server production and open the report, its succesfully. the report is open. but if i open report manager in server development show error
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'PNL'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine
i use windows authentication in my pnl datasource.
thanks
Yudhi
Hi,
I've written a DTS Package to pull information from a number of servers. I have a list of servers (Source Servers) and for each one I automatically update the Datasource property of the Source Server connection using vbscript in an ActiveX Script task and a global variable.
I have a transformation that occurs between the Source server and Target server.
As I process each Source Server in turn, the global variable gets set correctly and so does the Datasource property of the Source Server connection. However the transformation still runs against the first Source Server that was processed.
Looking at BOL it appears that a transformation stays connected even after it has finished. Therefore I assume that although I change the Datasource of the connection to a new server, it still runs against the first server that was used.
My question is how do I get the connection to run against the updated Datasource, i.e. do I need to do a refresh of the Connection, disconnect or what ?
Any ideas would be much appreciated.
thanks
I am making a rss script to deploy the reports and datasources.
View 2 Replies View RelatedI went to look at the connection string previously entered for a dataset created in a new report, and am not seeing anything intuitive for bringing up the associated datasource dialog box that was used to enter name, type and connection string. I'm also noticing nothing intuitive for deleting an existing dataset. How do you do these two very simple things in an existing project? I dont see the dataset in solution explorer, I see it only in the text box on the data tab and in a limited kind of way on the dataset view where the columns show and maint is allowed mostly on the columns only. I tried hilighting the dataset here and hitting the delete key to no avail.
View 1 Replies View RelatedI added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
I working on a form using an SQL DataSource. I am going to add a where clause. In that where clause a value from a label will be passed from the user.
How do I pass to the HTML Source the label value from the where clause. The value can change from user to user.
Sample below:
SELECT [KeyRolesID], [KeyRolesDesc] FROM [KeyRoles] WHERE ([JobCodeFamily] = @JobCodeFamily).
I want to replace the @JobCodeFamily which is currently coded with a value from the Sql DataSource in the design form with a label value entered by the user.
Hi, guys
I used an exported wcf service as a web service, try to use it as the reporting datasource,
[OperationContract]
DataSet GetTestReportData();
the app.config in the service host:
<configuration>
<appSettings>
<add key="BaseReportingAddress" value="http://localhost:8999/ReportHandlerService"/>
</appSettings>
<system.serviceModel>
<services>
<service name="Reporting_Handler.ReportHandlerService">
<endpoint address="http://localhost:8999/ReportHandlerService"
binding="basicHttpBinding"
behaviorConfiguration="ReportingServiceBehavior"
contract="Reporting_Handler.IReportingHandler"/>
</service>
</services>
<behaviors>
<behavior name="ReportingServiceBehavior">
<metadataPublishing
enableGetWsdl="true"
enableMetadataExchange="true"
enableHelpPage="false">
</metadataPublishing>
</behavior>
</behaviors>
I set the datasource type as xml and the connection string to http://localhost:8999/ReportHandlerService, the query string for dataset is
<Query>
<SoapAction>
http://tempuri.org/IReportingHandler/GetTestString
</SoapAction>
<Method Namespace="http://tempuri.org/IReportingHandler/"
Name="GetTestString">
</Method>
</Query>
but it doesn't work, I tried use a pure asp.net web service and it works. can anyone help me to set the connecting string for datasource and query for dataset when it using wcf as the web service? Thanks in advance.
bruce
Hi All,
I have a question about the datasource that we create on the Report Manager. What is it used for? In the below connection string which is given in the "Connection String" text box of a datasource link:
"Data Source=ProdServer;Initial Catalog=Northwind"
What is this datasource used for? Is it used only to use the ReportServer database or even our queries incorporated in the RDL files will be run against this datasource? I think the latter should not happen because while creating RDL files also, we provide a connection string to run the stored procedures against that datasource.
Please let me know about the same.
Thanks a lot and let me know if the question is not clear.
Manoj Deshpande.
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
Can someone help me with this? For the life of me, I cannot figure out why I recieve this error: Procedure or function usp_ContactInfo_Update has too many arguments specified.Here is my code: <asp:SqlDataSource ID="SqlDataSource2" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"SelectCommand="usp_ContactInfo_Select" SelectCommandType="StoredProcedure" UpdateCommand="usp_ContactInfo_Update"UpdateCommandType="StoredProcedure"><UpdateParameters><asp:Parameter Name="Division" Type="String" /><asp:Parameter Name="Address" Type="String" /><asp:Parameter Name="City" Type="String" /><asp:Parameter Name="State" Type="String" /><asp:Parameter Name="Zip" Type="String" /><asp:Parameter Name="Phone" Type="String" /><asp:Parameter Name="TollFree" Type="String" /><asp:Parameter Name="Fax" Type="String" /><asp:Parameter Name="Email" Type="String" /><asp:Parameter Name="Res" Type="Boolean" /><asp:Parameter Name="Res_Rec" Type="Boolean" /><asp:Parameter Name="Com" Type="Boolean" /><asp:Parameter Name="Com_Rec" Type="Boolean" /><asp:Parameter Name="Temp" Type="Boolean" /><asp:Parameter Name="Temp_Rec" Type="Boolean" /><asp:Parameter Name="Port" Type="Boolean" /><asp:Parameter Name="Land" Type="Boolean" /><asp:Parameter Name="Drop" Type="Boolean" /></UpdateParameters><SelectParameters><asp:ProfileParameter Name="DivID" PropertyName="Division" Type="String" /></SelectParameters></asp:SqlDataSource>Here is my Stored Proc:ALTER PROCEDURE dbo.usp_ContactInfo_Update @Division varchar(1),@Address varchar(50),@City varchar(50),@State varchar(2),@Zip varchar(10),@Phone varchar(20),@TollFree varchar(20),@Fax varchar(20),@Email varchar(50),@Res bit,@Res_Rec bit,@Com bit,@Com_Rec bit,@Temp bit,@Temp_Rec bit,@Port bit,@Land bit,@Drop bit/*(@parameter1 int = 5,@parameter2 datatype OUTPUT)*/AS/* SET NOCOUNT ON */ UPDATE tblDivisionSET Division = @Division, Address = @Address, City = @City, State = @State, Zip = @Zip, Phone = @Phone, TollFree = @TollFree, Fax = @Fax, Email = @Email,Residential = @Res, Residential_Recycling = @Res_Rec, Commercial = @Com, Commercial_Recycling = @Com_Rec, Temp = @Temp, Temp_Recycling = @Temp_Rec, Portable_Restrooms = @Port, Landscaping = @Land, Drop_Off_Center = @DropWHERE (Division = @Division) RETURNAny Help is greatly appreciated!
View 2 Replies View RelatedI have this web store that I have been creating. When a customer goes to check out, he has to log in, then he is redirected to a page where he can view/add/or edit shipping and billing address. I have based all the sql statements on the profile username, adding records and retrieving them works just fine. When I go to change something in the info it uses an sql statement that updates based on "Where AccountUserName = @AccountUserName", I have @AccountUserName set to Profile("Username"). Keep in mind this works fine for adding new or bring up current records. I even put in code in the updated event for the sql data source to post a msgbox telling me how many rows were affected, it says 1 even though I dont see any change in the data. What am I doing wrong here, it's driving me nuts, its just a very simple update.
View 2 Replies View RelatedMy god.All I want to do is post the contents of a web form to a database sql express 2005 or access using C#. Why can I find nothing for this very simple process online?Can you tell I am totally frustrated? So lets say i have a few text fields and I want to click submit and have that entered into a table. I use C# for code behind. So I can do basic C# programming and I can to webforms with visual web developer 2005 dragging and dropping for textboxs and a button to the aspx page. But then the mystery begins for me. How the hell do I simple post that form data to the table. I understand connection string basics. I aslo can design and create tables. But tying this all together is becoming a problem. I don't want to use gridview formview detailview or any of that canned UI stuff. I also don't understand VB and when I see VB examples they only cloud my already cloud ASP.NET world. Please help by posting examples, and maybe some links or books to add to my newbish collection. Thanks,Frank
View 3 Replies View RelatedLets say I have a Sqldatasource that uses the following SelectCommand="SELECT category,name FROM table". How do I get the value on category from my datasource in code behind if I know that my selectcommand always will return one row? Can I write something like datasource.items["category"].Value? Thanks for your help!
View 1 Replies View RelatedHi there,
I'm using a Repeater at the moment which is bound to a SQLDataSource. I expect much load on that Website, should I choose another DataSource? Which other DataSource is better if it's about Performance?
I read some stuff about the SQLAdapter and a DataSet.. is that better in performance? Why is it better?
What about LinQ?
Thanks a lot for any clarification.
I am using a SQLDatasource to populate a dataview as illustrated below. I run into a problem when I search for a "LastName" that includes an (') Apostrophe ( e.g. O'Reilly) . Searchin for the whole name there is no problem, but when I search for simply O, or O' I get errors.
I am not sure ...when to address names with an apostrophe...
1) On insertion to the database (using a "Replace(LastName, "'", "''") 2) or after they have been entered and they are to be searched for.
If scenario 1, can anyone provide the best way to do this...If scenario 2, how would that be worked into the SQL Datasource code below....
I have tried several variations with the times SQL Datasource to no avail....
I would appreciate any help !
Thanks !
<asp:SqlDataSource ID="SqlDataSource1" runat="server"ConnectionString="<%$ ConnectionStrings:ClinicTest2ConnectionString1 %>"
SelectCommand="SELECT [PatientID], [Accession], [FirstName], [LastName], [Address1], [City], [strddlPatientState], [ZIP], [DOB] FROM [ClinicalPatient] WHERE [LastName] LIKE @LastName ORDER BY [LastName],[FirstName]ASC">
<SelectParameters>
<asp:QueryStringParameter Name="LastName" QueryStringField="NameSearch_Result" />
</SelectParameters>
</asp:SqlDataSource>
I have a single variable to be utilitized in my SQL Where clause...
Select *FROM projectsWhere project_id = @id
How do I use this c# variable in the datasource?
string TableID; TableID = "192.AB";
I know this is simple, but I figured I'd ask. I don't want to do a work around , like a hidden textbox with the value assigned, and then link the datasource to the tb control, seems extremely hackish.
Hi
When I try to configure a SQL datasource and I use a Microsoft SQL Server datasource I get a blank drop down list for server name. My aspnetdb is available in SQL Server 2005 and I can log into it through management studio, and the service is started. I am also using Vista Ultimate.
Is there any other configuration I need to do for Visual Studio 2008 to see the SQL Server instance?
Thanks
Kwis
hi... i am very new to SQL server.. previously was using MySQL...
now i am trying to connect my project to SQL Server..
but i wasnt able to...
i keep getting errors
System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified at System.Data.Odbc.OdbcConnection.Open() at icms.DB.q(String mySTR) in C:icmsDB.vb:line 30
below is my webconfig
i am not very sure about the value for the user.. because if it is MySQL i can get it from my control centre.. but what about SQL server ? where should i get my value ?
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<appSettings>
<add key="db" value="icms" />
<add key="db_user" value="sqladmin" />
<add key="db_server" value="server" />
<add key="db_pwd" value="*****" />
<add key="session_timeout" value="600" />
</appSettings>
<system.web>
<compilation defaultLanguage="vb" debug="true" />
<trace enabled="true"/>
<customErrors mode="RemoteOnly" />
</system.web>
</configuration>
======================
Dim myCMD As New SqlCommand
Public Sub New()
Dim db_server = AppSettings("db_server")
Dim db = AppSettings("db")
Dim db_user = AppSettings("db_user")
Dim db_pwd = AppSettings("db_pwd")
Dim DBConnection As String = "DRIVER={SQL Server};" & _ '<==== is my driver correct?
"SERVER=" & db_server & ";" & _
"DATABASE=" & db & ";" & _
"UID=" & db_user & ";" & _
"PASSWORD=" & db_pwd & ";" & _
"OPTION=3;"
myDB.ConnectionString = DBConnection
myCMD.Connection = myDB
End Sub
'Public Function q(ByVal mySTR As String) As OdbcDataReader 'SQL Query
Public Function q(ByVal myStr As String) As SqlDataReader
myCMD.CommandText = myStr
Try
myDB.Open()
q = myCMD.ExecuteReader(Data.CommandBehavior.CloseConnection)
Catch ex As Exception
Err(ex.ToString)
End Try
End Function
Public Sub c(ByVal mySTR As String)
' COMMAND ONLY
Try
myCMD.Connection.Open()
myCMD.CommandText = mySTR
myCMD.ExecuteNonQuery()
myCMD.Connection.Close()
Catch ex As Exception
Err(ex.ToString)
End Try
End Sub
If I add this to my web config ConnectionStrings section:<add name="SQLPubs" connectionString="myServer99;uid=MyUId;pwd=MyPWD;database=MyDB" providerName="System.Data.SqlClient" />Everything displays correctly, referring to this section in the SQLDataSource ControlHowever, if I add the connection string, exactly as it's listed in the web.config, and INSTEAD of the using that entry, enter it implicitly in the Connectionstring property of the DataSource Control, along with adding the System.Data.SQLClient to the ProviderName property of the DataSource control (which I understood was possible), I get this error:Unable to find the requested .Net Framework Data Provider. It may not be installedWhat am I missing?here's my tag:<asp:SQLDataSource ID="DS1" Runat="Server" SelectCommand = "SELECT top 50 {FieldList}From {TableName}" ConnectionString="myServer99;uid=MyUId;pwd=MyPWD;database=MyDB" ProviderName="System.Data.SQLClient"></asp:SQLDataSource>
View 2 Replies View Relatedim using this datasource to extract values from a database.i simply want to extract the values for ratingsum and ratingcount to populate variables so as to be checked within a code loop.how do i do this? in classis asp would be something like <%=rsRecords(RatingSum)%><asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:MyConnectionString %>" ProviderName="<%$ ConnectionStrings:MyConnectionString.ProviderName %>" SelectCommand="SELECT SUM(rating) As RatingSum, COUNT(*) As RatingCount FROM tbl_Rating WHERE Itemid=100"> </asp:SqlDataSource>
View 1 Replies View RelatedI have a simple form that accepts a zip code and a city when the submit button is hit this is triggered...
Protected Sub btnSearch_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSearch.Click
Dim Zip, City As String
Zip = txtZip.Text
City = txtCity.Text
grdZipCodes.DataSourceID = "ZipSearch"
ZipSearch.SelectParameters("ZipCode").DefaultValue = Zip
ZipSearch.SelectParameters("City").DefaultValue = City
grdZipCodes.DataBind()
End Sub
This is supposed to populate a gridview with filtered data. Instead I get nothing, even though in query analyzer if I dont provide a city or a state all results are returned. Is there a reason my gridview is not populating.
this is what my SQL Datasource is :
<asp:SqlDataSource ID="ZipSearch" runat="server" ConnectionString="<%$ ConnectionStrings:something%>" SelectCommand="ZipCodesSearch_s" SelectCommandType="StoredProcedure">
<SelectParameters>
<asp:Parameter Name="ZipCode" Type="string" Direction=input />
<asp:Parameter Name="City" Type="string" Direction=input />
</SelectParameters>
</asp:SqlDataSource>
In the following example...
EXEC sp_addlinkedserver
@server = 'Shipping',
@provider = 'Microsoft.Jet.OLEDB.4.0',
@srvproduct = 'OLE DB Provider for Jet',
@datasrc = 'C:ShippingShipping BackEnd.mdb'
...can I specify the UNC path of the Access DB instead?
Hi,
New to databases so need some help. While trying to set up data source in control panel, I find that there are no drivers for *mdf files. Just *.dbo and *.xls and others. Can someone tell me what to do. I can't get analysis services to let me access my database, which are *mdf files a friend sent me.
What do I need to do...Can someone help me.
Regards,
Milfredo.
I am trying to do incremental extract using Datasource reader.
I need to send a variable in where condition to extract the data base on the max date from other table.
To implement this i have created two variables
1)to get the max date from the table.
2)to store the sql query and send the mad date from other variable to extract the data.
i have give this sql variable in data flow expression.but its not working.
can any one tell me where i am going wrong.
Hi All,
I am using SSRS 2005 (Report Designer), and in 1 of the Report, I have a Report Parameter for example say IMask (Dropdown List), which I am populating by values from the following XML file (Imask.xml)
<?xml version="1.0" standalone="yes"?>
<REPORTCONFIG>
<INVALIDMASK>
<INDEX>0</INDEX>
<IMASK>00000000</IMASK>
<DESC>Custom Created</DESC>
</INVALIDMASK>
<INVALIDMASK>
<INDEX>1</INDEX>
<IMASK>FFFFFFFF</IMASK>
<DESC>Custom Created1</DESC>
</INVALIDMASK>
</REPORTCONFIG>
I have created a XML DataSet whose DataSource is of €œType : XML€œand get the values from the above mentioned XML file by using following XML query :
REPORTCONFIG {}/ INVALIDMASK
The Result of the above XML query is:
INDEX | IMASK | DESC
--------------------------------------------------------------
0 00000000 Custom Created
1 FFFFFFFF Custom Created1
Now, the report Parameter (IMask) which is a DDL has
€œvalue field€?= IMASK and €œlabel field€?= DESC
So far so good, but what I really want :
1) in case of label field is something like this:
€œlabel field€?= IMASK : DESC (for eg; 00000000 : Custom Created 1)
2) If no nodes(<INVALIDMASK>) are present in the XML file, I get no results when the above XML query is fired. So, Is there any way of getting the count of rows returned by XML query.
And in case of no rows I want my Report Parameter (IMask) to have
€œvalue field€?= NONE and €œlabel field€?= NONE
Regards,
abhi_viking
Hello :
Can we make to cross the name of the DataSource in URL of the report ?
Thank you very mutch.