I tried using some code for the new pivot function in the "Inside Microsoft SQL Server 2005 T-SQL Querying" book.
I was using the Northwind database but that was from a SQL 2000 database. There was an error that stated the database needed to be updated.
I have looked all over the web and have not seen where to download the SQL 2005 Northwind & Pubs database.
Anybody have the URL for this or is this not available?
Thanks,
Gene
Hi all,
From the http://msdn.microsoft.com/en-us/library/bb384469.aspx (Walkthrough: Creating Stored Procedures for the Northwind Customers Table, I copied the following sql code:
--UpdateSPforNWcustomersTable.sql--
USE NORTHWIND
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'SelectCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.[SelectCustomers]
GO
CREATE PROCEDURE dbo.[SelectCustomers]
AS
SET NOCOUNT ON;
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM dbo.Customers
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'InsertCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.InsertCustomers
GO
CREATE PROCEDURE dbo.InsertCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
SET NOCOUNT OFF;
INSERT INTO [dbo].[Customers] ([CustomerID], [CompanyName], [ContactName], [ContactTitle], [Address], [City], [Region], [PostalCode], [Country], [Phone], [Fax]) VALUES (@CustomerID, @CompanyName, @ContactName, @ContactTitle, @Address, @City, @Region, @PostalCode, @Country, @Phone, @Fax);
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'UpdateCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.UpdateCustomers
GO
CREATE PROCEDURE dbo.UpdateCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24),
@Original_CustomerID nchar(5)
)
AS
SET NOCOUNT OFF;
UPDATE [dbo].[Customers] SET [CustomerID] = @CustomerID, [CompanyName] = @CompanyName, [ContactName] = @ContactName, [ContactTitle] = @ContactTitle, [Address] = @Address, [City] = @City, [Region] = @Region, [PostalCode] = @PostalCode, [Country] = @Country, [Phone] = @Phone, [Fax] = @Fax WHERE (([CustomerID] = @Original_CustomerID));
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
====================================================================================
I executed the above code in my SQL Server Management Studio Express (SSMSE) and I got the following error messages:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NORTHWIND'. No entry found with that name.
Make sure that the name is entered correctly.
===============================================================================================================
I know I recreated the NORTHWIND Database from a different Database before and I did not do anything for the entry in sysdatabases. How can I change the entry in sysdatabases for database 'NORTHWIND' now? Please help and advise.
Thanks in advance,
Scott Chang
Hi all,
In MyDatabase, I have a TABLE dbo.LabData created by the following SQLQuery.sql:
USE MyDatabase
GO
CREATE TABLE dbo.LabResults
(SampleID int PRIMARY KEY NOT NULL,
SampleName varchar(25) NOT NULL,
AnalyteName varchar(25) NOT NULL,
Concentration decimal(6.2) NULL)
GO
--Inserting data into a table
INSERT dbo.LabResults (SampleID, SampleName, AnalyteName, Concentration)
VALUES (1, 'MW2', 'Acetone', 1.00)
INSERT €¦ ) VALUES (2, 'MW2', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (3, 'MW2', 'Trichloroethene', 20.00)
INSERT €¦ ) VALUES (4, 'MW2', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (5, 'MW2', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (6, 'MW6S', 'Acetone', 1.00)
INSERT €¦ ) VALUES (7, 'MW6S', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (8, 'MW6S', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (9, 'MW6S', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (10, 'MW6S', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (11, 'MW7', 'Acetone', 1.00)
INSERT €¦ ) VALUES (12, 'MW7', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (13, 'MW7', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (14, 'MW7', 'Chloroform', 1.00)
INSERT €¦ ) VALUES (15, 'MW7', 'Methylene Chloride', 1.00)
INSERT €¦ ) VALUES (16, 'TripBlank', 'Acetone', 1.00)
INSERT €¦ ) VALUES (17, 'TripBlank', 'Dichloroethene', 1.00)
INSERT €¦ ) VALUES (18, 'TripBlank', 'Trichloroethene', 1.00)
INSERT €¦ ) VALUES (19, 'TripBlank', 'Chloroform', 0.76)
INSERT €¦ ) VALUES (20, 'TripBlank', 'Methylene Chloride', 0.51)
GO
A desired Pivot Table is like:
MW2 MW6S MW7 TripBlank
Acetone 1.00 1.00 1.00 1.00
Dichloroethene 1.00 1.00 1.00 1.00
Trichloroethene 20.00 1.00 1.00 1.00
Chloroform 1.00 1.00 1.00 0.76
Methylene Chloride 1.00 1.00 1.00 0.51
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I write the following SQLQuery.sql code for creating a Pivot Table from the Table dbo.LabData by using the PIVOT operator:
USE MyDatabase
GO
USE TABLE dbo.LabData
GO
SELECT AnalyteName, [1] AS MW2, AS MW6S, [11] AS MW7, [16] AS TripBlank
FROM
(SELECT SampleName, AnalyteName, Concentration
FROM dbo.LabData) p
PIVOT
(
SUM (Concentration)
FOR AnalyteName IN ([1], , [11], [16])
) AS pvt
ORDER BY SampleName
GO
////////////////////////////////////////////////////////////////////////////////////////////////////////////////
I executed the above-mentioned code and I got the following error messages:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'TABLE'.
Msg 207, Level 16, State 1, Line 1
Invalid column name 'AnalyteName'.
I do not know what is wrong in the code statements of my SQLQuery.sql. Please help and advise me how to make it right and work for me.
Thanks in advance,
Scott Chang
I have two data tables:
1) Production data with column headers: Key, Facility, Line, Time, Output
2) Costs data with column headers: Key, Site, Cost Center, Time, Cost
The tables have a common key named obviously as Key. The data looks like this:
Key
Facility
Line
Time
Output
Alpha
I would like to have two pivot tables which I can filter with ONE slicer based on the column Key. The first pivot table shows row labels Facility, Line and column labels Time. Value field is Output. The second pivot table shows row labels Site, Cost Center, and column lables Time. Value field is Cost.How can I do this with Power Pivot? I tried by linking both tables above to a table with unique Keys in PowerPivot and then creating a PivotTable where I would have used the Key from the Keys table.
Can I force the following measure to be visible for all rows in a pivot table?
Sales Special Visibility:=IF(
  HASONEVALUE(dimSalesCompanies[SalesCompany])
  ;IF(
    VALUES(dimSalesCompanies[SalesCompany]) = "Sales"
    ;CALCULATE([Sales];ALL(dimSalesCompanies[SalesCompany]))
    ;[Sales]
  )
  ;BLANK()
)
FYI, I also have other measures as well in the pivot table that I don't want to affect.
I have a simple pivot table (screenshot below) that has two variables on it: one for entry year and another for 6 month time intervals. I have very simple DAX functions that count rows to determine the population N (denominator), the number of records in the time intervals (numerator) and the simple percent of those two numbers.
The problem that I am having is that the function for the population N is not overriding the time interval on the pivot table when I use an ALL function to do so. I use ALL in other very simple pivot tables to do the same thing and it works fine.
The formula for all three are below, but the one that is the issue is the population N formula. Why ALL would not work, any other way to override the time period variable on the pivot table.
Population N (denominator):
=CALCULATE(COUNTROWS(analyticJudConsist),ALL(analyticJudConsist[CurrentTimeInCare1]))
Records in time interval (numerator):
=COUNTROWS(analyticJudConsist)
Percent:
=[countrows]/[denominatorCare]
How can I apply "Min" formula under a "new measure" (calculated field) within a pivot table under Power pivot 2010?Can see that neither does it allow me to apply "min" formula directly "formula box" nor could find any other option.Intent formula: "=Min(1,sum(a:b))" this isn't allowed so all I can do is "=sum(a:b)".
View 3 Replies View RelatedI have simple pivot table (below screenshot with info redacted) that displays a population number ("N" below), this is the denominator, a cumulative numerator number (below "#") and a simple cumulative percent that just divides the numerator by the denominator. It cumulates from top to bottom. The numerator and percent are cumulative using the below functions. There are two problems with the numerator and percent:
1. When there is not a number for the numerator, there is no value displayed for both the numerator and the percent..There should be a zero displayed for both values.
2. When there has been a prior number for the numerator and percent (for a prior month interval) but there is no number for the numerator in the current month interval, the prior month number and percent are not displayed in the current month interval--see the 3rd yellow line, this should display "3" and "16.7%" from the second yellow line.Here is the formula for the numerator:
=CALCULATE(count(s1Perm1[entity_id]),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory])))
Here is the formula for the percent:
=(CALCULATE(countrows(s1Perm1),FILTER(ALL(s1Perm1[ExitMonthCategory]),s1Perm1[ExitMonthCategory] <= MAX(s1Perm1[ExitMonthCategory]))))/(CALCULATE(COUNTROWS(s1Perm1),ALL(s1Perm1[Exit],s1Perm1[ExitMonthCategory])))
I have data in my Powerpivot window which was generated by a sql query. This data includes a field named 'Cost' and every row shows a value for 'Cost' greater than zero. The problem is that when I display this data in the pivot table all entries for Cost display as $0. At first I thought that maybe Cost was set to a bogus data type (such as 'text) but it is set to ''Decimal Number' so that's not the problem.Â
What is happening and how do I fix it so that my pivot table reflects the values for 'Cost'?
I have a data table that contains budget and actual data by month. Â I use the data to create a pivot that shows actual results next to budgeted results. Â I need a column that shows that variance between those columns. Â I think my issue is that the "Type" field contains actual and Budget. Â I sum on "Type". Â I can't seem to create a sum since those items are in the same field or am I missing something?
Table design
Month|Division|Subdivision|Type|Dept|Rate|Units|Amount
October|DC|Day|Budget|125|10.00|100|1000
October|DC|Day|Actual|125|10.00|110|1100
Output Design
DC
DAY
Actual
Budget
125 AvgOfRate
AvgOfRate
SumOfUnits
SumOfUnits
SumOfAmt
SumOfAmt
How to get a list of values to actually display in correct order in either a slicer or when on an axis on a pivot table?
I currently have the below list and have tried to add a preceding numeric (ex. "1. <=0") or preceding blank space, neither of which is visually great. Is there another way?
<= 0
1 - 6
7 - 12
13 - 18
19 - 24
25 - 30
31 - 36
37 - 42
43 - 48
49 - 54
55 - 60
61 - 66
67 - 72
73 - 78
79 - 84
85 - 90
91 - 96
97 - 102
> 102
I am using excel 2010 and creating pivot table from Power Pivot. I created a pivot table with department slicers. All is good, the problem I am having is whilst in an unfiltered position (ALL) of the slicers (departments) I get 200 pages, now when I click on a given department with say 10 pages, I still get the same 200 pages with the first 10 pages showing the data from the clicked department and 190 blank pages.
All I want is to get a WYSIWYG (What you see is what you get) of what is on the screen as my print, but I am getting extra blank pages right after the data. Â How do I resolve this.
Below are the steps I go thru to printÂ
1. Select slicers in unfiltered position (ALL)
2. Select entire pivot table
3. Select Page layout and select print area.
4. Save
5. Click on Print Preview to preview the print
6. Click on a given department in the slicer and repeat item 5, but this gives me blank pages after the data.
Do I need any other step?Â
I am using the pivot task to to a pivot of YTD-Values and after that I use derived columns to calculate month values and do a unpivot then.
All worked fine, but now I get this error message:
[ytd_pivot [123]] Error: Duplicate pivot key value "6".
The settings in the advanced editor seem to be correct (no duplicate pivot key value) and I am extracting the data from the source sorted by month.
Could it be a problem that I use all pivot columns (month 1 to 12) in the derived colum transformation and they aren´t available at this moment while data extracting is still going on?
any hints?
Cheers
Markus
Sorry if this is the wrong forum, but it seems the most appropriate. My "Teach yourself about .Net, Life, the Universe and Everything" book uses the Northwind database in Sql Server format. Is this available for download somewhere?
View 1 Replies View RelatedI have to do an exercize where i am using Northwind sample database. I am normally accustomed to linking to a database on another server. Is there a way i can just include the Northwind database to my project. In general, I need to find out how to link to the Northwind db so I can start querying and processing data. thanks for your help
View 4 Replies View Relatedi need links from where i can download northwind database both access and sql format thanx
View 2 Replies View RelatedI want use the the Northwind database do some example! I had installed the Visual Web Deveplopment Express Edition and installed the SQL Server 2005 Express Edition .but I build one new Website and connect the Northwind database but i can't find the it from the Database Explorer.why?
View 1 Replies View RelatedCan't open Northwind - asp.net - dataaccess-sqldatasource
I remembered doing walkthrough using Northwind. However it wasn't an http project but a file project using the development server. Northwind allowed me to add, edit and insert, and the web page looked fine.
I opened a simple project just to see whether I could get my sqlserver on the internet. (vs studio 2005, sqlserver 2005)
I created the project in http location http://localhost/Northwind . I dragged a sqldatasource to the page, configuring it to display ID and ProductName. I clicked advanced, but noticed the generate insert, edit and delete were grayed out. That told me something was wrong with my authetification.
I configured my sqlserver 2005 to have integrated security.
I built the solution and website, then pressed cntl-F5. I got a login error. Nowhere did the page ask me for username and password. First questions - how do I get this to open up a web page, and how to I get it to allow me to generate insert, edit and delete statements?
dennist685
Server Error in '/Northwind' Application.--------------------------------------------------------------------------------
Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.Login failed for user 'YOUR-02910F1DF1ASPNET'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735123 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137 System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83 System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770 System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17 System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.DetailsView.DataBind() +4 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.DetailsView.EnsureDataBound() +181 System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69 System.Web.UI.Control.EnsureChildControls() +87 System.Web.UI.Control.PreRenderRecursiveInternal() +41 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Control.PreRenderRecursiveInternal() +161 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
sara writes "Dear Sir/Madam,
I use Sql Server 2005.I want to use Northwind Database & I have it but I could not Execute That It is the error:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NorthwindCS'. No entry found with that name. Make sure that the name is entered correctly.
Would you please help me with that?
Regards,
Sara"
Hi I have just started using the SQL Server 2005 Express Edition and wondering how to install the InstNwnd.sql from the sql file. I can't find any way to insert the database
Any help would be very appreciated
Thanks
OK
I've loaded MSDE and its running OK
I've run config.exe to install the sample .net databases,
......but I cannot find northwind or anyother db on the server!
I've never done any db work befor so may be I'm being a bit of a tit!!! sorry in advance if i am...
stuart
I've running MSDE on a win xp box with SP2. The SQL server service manager indicates that the SQL server is running. I'm using Visual Studio 2003. According to the install page for 101 VB and C# Code Samples I should install the .NET frameword samples db.. See http://www.microsoft.com/downloads/details.aspx?FamilyId=08E3D5F8-033D-420B-A3B1-3074505C03F3&displaylang=en
I cd to the appropriate dir and run osql -E -S (local)NetSDK -i InstNwnd.sql (the cmd given on the page noted above). I get the following error:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsPhilip Toews>cd C:Program FilesMicrosoft Visual Stud
io .NET 2003SDKv1.1SamplesSetup
C:Program FilesMicrosoft Visual Studio .NET 2003SDKv1.1SamplesSetup>osql -
E -S (local)NetSDK -i InstNwnd.sql
[DBMSLPCN]SQL Server does not exist or access denied.
[DBMSLPCN]ConnectionOpen (Connect()).
C:Program FilesMicrosoft Visual Studio .NET 2003SDKv1.1SamplesSetup>
I'm a newbie to .NET and SQL server so this makes no sense to me. If the SQL server service manager indicates that the SQL server is running why do I get that error and what is the work around?
Thanks .NET great ones for helping a newbie get off the ground...
:-)
I'm installing Northwind Database onto Local Computer. The Computer's Name is (Localhost)The Installation Menu is asking to for the [Enter Name of the (Server)] "______________________" Am I correct in assuming to Enter Localhost - for the [Enter Name of the (Sever)]. "___Localhost_____" Can someone comfirm as to whether this is correct or not... Thank You.
View 2 Replies View RelatedI have installed MS SQL server eval edition and read through a lot of BOL, just about got my head around users and authentication etc and have a pretty good grounding on db design and architecture.
I now want to mess around with the sample databases a bit to get used to the SQL server interface before I start creating new ones etc but beyond random simple queries that I make up i'm struggling with what to do. I'm sure there are some microsoft tutorials based on the northwind and pubs databases I just cant seem to find any anywhere.
Any suggestions greatfully recieved, Cheers
Dan
I'm using XP Pro and I have the Developer's version of SQL Server installed. I downloaded SQLXML 3.0 and created a virtual directory named nwind.
I then entered the following on my IE browser:
http://<IIServer>/nwind?sql=SELECT FirstName, LastName FROM Employees FOR XML AUTO&root=root
the result is:
"The page cannot be displayed..."
I'd appreciate any help.
Thanks,
Pat
I have asked for the following questions and I need your advises.Utilizing the Northwind database suppied with SQL Server, create SQL tosolve each of the exercises listed.1.I want to contact all customers who have received over $1,000 indiscounts on orders this year. Give me the name and phone number of theperson to contact at the customers site. Also, list the orders wherethe total discount was greater than $100. Remember, discount is apercentage of the price.2.Give me a list of suppliers and products where we do not have thestock on hand to fill the orders to be shipped. List out the customerand order information for each of the products involved.3.Give me a list of all orders that were shipped after the requireddate for the week of Jan 7, 2001. I want to know the name of theemployees that were responsible for the orders.4.We are having a golf tournament and I need some prizes. Give me alist of the top 5 shippers by dollar amount in the last year.5.Some customers are taking us for a ride on shipping. Give me a listof customers and the orders involved where more than ½ of their ordersare being shipped to a region other than their home region.Please advise ...thanks a lot
View 2 Replies View RelatedHi Everyone,
I have a question in regards to SQL Server 2000 and its Query Analyzer. I am trying to create certain queries and I need a Northwind database to work with. However, I can't seem to add the database to the dbs' combo box. Basically, I could not find the way to add this database to the analyzer so I can practice with it. Only databases that are there are the system's ones: Master, Model, MSDB and tempdb.
So how to add this database to the analyzer's settings?
Thanks in advance :)
I am learning SQL Server 2005 Express, and want to use the Northwind data base as used in many code examples. I wanted to attach the Northwind data base via SQL Management Studio, but cannot find a Northwind.mdf file.
When I do a search using 'Northwind', I see there are already a couple of different versions of Northwind already loaded. One appears to be associated with SQL Server Mobile Edition (Samples folder) and another seems to be associated with Visual Studio 8SDKv2.0Quickstart.
Can I use one of these existing Northwind databases (none have .mdf extention) for SQL Server 2005 or do I need to download yet another version?
i am getting an error ... given below and my web.config is also given below
can any one help me is my connection string right ...
i am using sql server 2005 ..
my system name is soft18 ..
Server Error in '/prjLogin' Application.
Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'SOFT18Administrator'.
Description: An
unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the
error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'SOFT18Administrator'.
Source Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of
the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): Cannot open database "Northwind" requested by the login. The login failed.
Login failed for user 'SOFT18Administrator'.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +115
System.Data.SqlClient.TdsParser.ThrowExcepti....................
........................
................
...................
//web.config
<?xml version="1.0"?>
<configuration xmlns="http://schemas.microsoft.com/.NetConfiguration/v2.0">
<connectionStrings>
<add name="QuickStartSqlServer" connectionString="Server=localhostSQLExpress;Integrated Security=SSPI;Database=Northwind;" providerName="System.Data.SqlClient" />
</connectionStrings>
<system.web>
<authentication mode="Forms">
<forms name=".ASPXAUTH"
loginUrl="Login.aspx"
protection="All"
timeout="30"
path="/"
requireSSL="false"
slidingExpiration="true"
defaultUrl="Login.aspx"
cookieless="UseDeviceProfile"
enableCrossAppRedirects="false"/>
</authentication>
<membership defaultProvider="QuickStartMembershipSqlProvider"
userIsOnlineTimeWindow="15">
<providers>
<add
name="QuickStartMembershipSqlProvider"
type="System.Web.Security.SqlMembershipProvider, System.Web,
Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a"
connectionStringName="QuickStartSqlServer"
enablePasswordRetrieval="false"
enablePasswordReset="true"
requiresQuestionAndAnswer="true"
applicationName="LoginControls"
requiresUniqueEmail="true"
passwordFormat="Hashed"/>
</providers>
</membership>
<roleManager
enabled="true"
cacheRolesInCookie="true"
defaultProvider="QuickStartRoleManagerSqlProvider"
cookieName=".ASPXROLES"
cookiePath="/"
cookieTimeout="30"
cookieRequireSSL="false"
cookieSlidingExpiration="true"
createPersistentCookie="false"
cookieProtection="All">
<providers>
<add name="QuickStartRoleManagerSqlProvider"
type="System.Web.Security.SqlRoleProvider,
System.Web, Version=2.0.0.0, Culture=neutral,
PublicKeyToken=b03f5f7f11d50a3a"
connectionStringName="QuickStartSqlServer"
applicationName="LoginControls"/>
</providers>
</roleManager>
<authorization>
<allow users="*"/>
</authorization>
<compilation debug="true"/>
</system.web>
</configuration>
Say, I have the following temporary table (@tbl) where the QuestionID field will change values over time
Survey QuestionID Answer
1 1 1
1 2 0
2 1 1
2 2 2
I'd like to perform a pivot on it like this: select * from @tbl Pivot (min(Answer) for QuestionID in ([1], [2])) as PivotTable
...however, I can't just name the [1], [2] values because they're going to change.
Instead of naming the values like this:
for QuestionID in ([1], [2], [3], [4])
I tried something like this:
for QuestionID in (select distinct QuestionID from @tbl)
but am getting a syntax error. Is it possible to set up a pivot like this:
select * from @tbl Pivot (min(Answer) for Question_CID in (select distinct @QuestionID from @tbl)) as PivotTable
or does anyone know another way to do it?
Is it possible to generate automatic refresh of excel 2013 table which displays some table of a power pivot model on file open?? I dont want to use pivottable (which supports this ...)
View 2 Replies View RelatedI have a pivot table that connects to our data warehouse via a PowerPivot connection. Â The data contains a bunch of comment fields that are each between 250 and 500 characters. Â I've set the columns in this pivot table to have the 'Wrap Text' set to true so that the user experience is better, and they can view these comment fields more clearly.
However, whenever I refresh the data, the text wrapping un-sets itself. Â Interestingly, the 'Wrap Text' setting is still enabled, but I have to go and click it, then click it again to actually wrap the text. Â This is very burdensome on the user, and degrading the experience.
Any way to make this text wrapping stick so that I don't have to re-set it every time I refresh the data?
Hi all,Does anyone know where I can find the Northwind database for SQL Server 2005 Express edition?Everywhere I look I get redirected to the AdventureWorks database, but it must be available because this article which is based on 2005 references it...http://weblogs.asp.net/scottgu/archive/2006/01/15/435498.aspxThanks
View 2 Replies View Related