I have this script that captures metrics and sizes using T-SQL. When running in development I have no issues. I can run under the context of any database and get results back. When deploying to production servers no results are returning. I'm trying to figure out what permissions are needed for this to return results.
No error message is being returned either. My access is limited for triage against Production? I need to be able to have Production DBA set the right permissions so this job can run correctly.
Sould one has a seperated environment for production and test system? How do you do it on a same server? Install two instance? How do you seperate test DBs from the production DBs? Please advise...Thank you
I want to make some steps towards securing production database.
1. Give limited rights to Developers, i.e. db reaonly, db writedeny 2. Make strong password for local and Domain 3. Use Windows authentication 4. Enable log for 'Failed Login' attempts.
I developed an asp.net application in visual web developer 2005 express edition and SQL sever 2005 express with Advanced services. The application has been deployed and iam wondering what tools are availabel to for backing up my data. Are there any tools i can use to back-up my database. Iam not talking of third party tools but tools a vailable in sql sever 2005 express with advanced services or visual web developer express. OR can write a vb.net Sub procedure that i run and have my database backed up. If so where can i start or what other options may i explorer.
Is it possible to deploy both SQL2000 and SQL2005 on the same server in the production environment?
Is it recommended? Next year we will be deploying a SQL2005 solution and was wondering if we could get away with installing it on the same server as the SQL2000 server, or whether we should put it on another server.
I have been looking for some documentation that would support or rejectmy opinion on Production -vs- Development naming conventions. Ibelieve that each environment should be housed on separate servers withidentical names, access, users, stored procs....... If you eitheragree or disagree with this methodology, I would appreciate your input.TIA,Bill
This is my problem. My package executes fine when i set the connection string with the same database where i execute the query. If i execute with another database connection stirng if fails bacause while executing the pacakge it trys to access the same connection string at design mode.
when i try to execute through cmd prompt by setting conn <new database connection string> it fails.
Is package configuration is the only solution. how can i change conn string depending on different server?
Used the same connection string and DSN (i.e pointing to the same database/server) in both environments. ASP works in Test Environment. Fails in Production Environment.
Test and Production have same versions of software.
Environment Details:
OS: Windows 2003 SP2 MDAC: 2.8 Database: HP Neoview
Our DBA is out for about 6 weeks. One of his regular jobs is to take a Database that is in our Prod environment and copy it to our Training environment.
I have backed up and restored to different servers before, however the Database name in Prod is different than in the Train environment in this case.
In other words I have a PROD database named DATABASE-XX that I want to copy to another SQL server and restore it to DATABASE-XX-TRAIN.
Is there anything special I need to do, other than backup on PROD, copy to TRAIN and restore to the corresponding DB in TRAIN?
We will be implementing our first SQL cluster in December. Our current plan calls for a shared development/test database server with one physical server, but two SQL Server instances. Our production environment will be a SQL cluster. Is it necessary to create a clustered test environment for testing patches, hot-fixes, etc...?
I have heard that turning off 'primary key-to-foreign key-relationships' between tables , helps to boost performance in production environments. Is this really true?
Setting up Transaction Replication in test environment. I am willing to bet that most of you take a production backup (if so, how, and using what?), restoring the database to your test environment, then running a snapshot to your subscriber and away you go.
But perhaps you take a backup of your publisher and subscriber, if so, how do you know there are no inconsistences because there were transactions sitting on the distributor?
What do you do if you have additional indexes on the subscriber for reporting, that are not on the publisher?
Here at work we are having issues with getting consistent databases set up with T Rep, missing rows, duplicate keys at subscriber etc. How to avoid these issues.
I have four tables: Customer (CustomerId INT, CountyId INT), County (CountyId INT), Search(SearchId INT), and SearchCriteria (SearchCriteriaId INT, SearchId INT, CountyId INT, [others not related to this]).
I want to search Customer based off of the Search record, which could have multiple SearchCriteria records. However, if there aren't any SearchCriteria records with CountyId populated for a given Search, I want it to assume to get all Customer records, regardless of CountyId.
Right now, I'm doing it this way.
DECLARE @SearchId INT = 100 SELECT * FROM Customer WHERE CountyId IN ( SELECT CASE WHEN EXISTS(SELECT CountyId FROM SearchCriteria WHERE SearchId = @SearchId) THEN SearchCriteria.CountyId
[Code] .....
This works; it just seems cludgy. Is there a more elegant way to do this?
I have a FullTextSQLQuery which I am trying to search a phrase(The Multi-part identifier) on full text indexed table. I am getting expected results on running the below sql query on QA machine and PreProduction servers, but not getting the same results on our development and production servres as even though same code running.
SELECT DISTINCT TOP 50 c.case_id,c.status_id,cal.cas_details FROM g_case_action_log cal (READUNCOMMITTED) INNER JOIN g_case c (READUNCOMMITTED) ON (cal.case_id = c.case_id) INNER JOIN CONTAINSTABLE(es.g_case_action_log, cas_details, ' "The multi-part identifier" OR "<br>The multi-part identifier" OR "The multi-part identifier<br>" ') as key_tbl ON cal.log_id = key_tbl.[key] ORDER By c.case_id DESC
We are using SqlServer 2008 R2 version on all servers.
I have the following stored procedure that is returning nothing can anyone please help? SELECT job_id, line_num, cust_id, cust_po_id, product_desc, form_num, revision, flat_size, new_art_reprint, order_qty, po_recieved_date, ord_ent_date, customer_due_date, scheduled_ship_date, act_ship_date, act_ship_qty, ship_from, ship_to, price_per_m, misc_charges, commentsFROM tblOrderWHERE (cust_id = @Cust_Id) AND (po_recieved_date BETWEEN @Start AND @End) When I input parameters I make sure my start date is before the first po_recieved_date and the end date is after it yet it is returning nothing. I also made sure that I am putting the correct @Cust_Id
How do I get my data to show starting at the first row instead of skipping down?
Refer to the attachment.
Code: CREATE PROCEDURE [dbo].[uspReportData] -- Add the parameters for the stored procedure here @Metric1 as varchar(50) = NULL, @Metric2 as varchar(50) = NULL, @Metric3 as varchar(50) = NULL, @Metric4 as varchar(50) = NULL, @Metric5 as varchar(50) = NULL, @Metric6 as varchar(50) = NULL, @Metric7 as varchar(50) = NULL, @Metric8 as varchar(50) = NULL,
I am/have been having an issue with Data Access from a Sql Server database. I have a class that contains a method called "GetDataReader" which takes in a string for the query. Occasionally, the DataReader returned has completely different columns thus resulting in an error when trying to read the data. Below is a small section of code that actually creates the datareader, opens the connection and executes the reader.SqlCommand cmdReader = new SqlCommand(); SqlDataReader drReturn = null; try { // Set the connection for the command object cmdReader.Connection = new SqlConnection(this._csbGlobal.ConnectionString); cmdReader.Connection.Open(); // Set the command type cmdReader.CommandType = Type; // Set the command text cmdReader.CommandText = Sql; // Set the command timeout cmdReader.CommandTimeout = _iTimeout; if (Parameters != null) { // Set the parameters for (int i = 0; i < Parameters.Count; i++) { cmdReader.Parameters.AddWithValue("@" + Parameters.GetKey(i), Parameters[i]); } }
// Get the return value drReturn = cmdReader.ExecuteReader(CommandBehavior.CloseConnection); // Dispose of the command object cmdReader.Dispose(); cmdReader = null; } catch (SqlException e) { this.HandleError(e); } catch (Exception e) { this.HandleError(e); } // Return the reader return drReturn;The data access class is created on each page and only used for that page and any usercontrols on that page. I have checked all the datareaders and they are all being closed. I have been fighting with this issue for about a month and a half now. It only seems to happen when there are a lot of people on the site.If anyone has experienced this or konws how to fix it please let me know. Thanks-Jason
Hi,I'm creating a stored procedure that pulls information from 4 tables based on 1 parameter. This should be very straightforward, but for some reason it doesn't work.Given below are the relevant tables: SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_Project]( [ProjID] [varchar](300) NOT NULL, [ProjType] [varchar](20) NULL, [ProjectTitle] [varchar](max) NULL, [ProjectDetails] [varchar](max) NULL, [ProjectManagerID] [int] NULL, [RequestedBy] [varchar](max) NULL, [DateRequested] [datetime] NULL, [DueDate] [datetime] NULL, [ProjectStatusID] [int] NULL, CONSTRAINT [PK__tbl_Project__0B91BA14] PRIMARY KEY CLUSTERED ( [ProjID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF GO ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID]) REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID]) GO ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectManager] GO ALTER TABLE [dbo].[tbl_Project] WITH CHECK ADD CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID]) REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID]) GO ALTER TABLE [dbo].[tbl_Project] CHECK CONSTRAINT [FK_tbl_Project_tbl_ProjectStatus]
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_Report]( [ReportName] [varchar](50) NOT NULL, [ProjID] [varchar](300) NULL, [DeptCode] [varchar](50) NULL, [ProjType] [varchar](50) NULL, [ProjectTitle] [varchar](500) NULL, [ProjectDetails] [varchar](3000) NULL, [ProjectManagerID] [int] NULL, [RequestedBy] [varchar](50) NULL, [DateRequested] [datetime] NULL, [DueDate] [datetime] NULL, [ProjectStatusID] [int] NULL, CONSTRAINT [PK_tbl_Report] PRIMARY KEY CLUSTERED ( [ReportName] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF GO ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] FOREIGN KEY([ProjectManagerID]) REFERENCES [dbo].[tbl_ProjectManager] ([ProjectManagerID]) GO ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectManager] GO ALTER TABLE [dbo].[tbl_Report] WITH CHECK ADD CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus] FOREIGN KEY([ProjectStatusID]) REFERENCES [dbo].[tbl_ProjectStatus] ([ProjectStatusID]) GO ALTER TABLE [dbo].[tbl_Report] CHECK CONSTRAINT [FK_tbl_Report_tbl_ProjectStatus]
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_ProjectStatus]( [ProjectStatusID] [int] IDENTITY(1,1) NOT NULL, [ProjectStatus] [varchar](max) NULL, CONSTRAINT [PK__tbl_ProjectStatu__023D5A04] PRIMARY KEY CLUSTERED ( [ProjectStatusID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[tbl_ProjectManager]( [ProjectManagerID] [int] IDENTITY(1,1) NOT NULL, [FName] [varchar](50) NULL, [LName] [varchar](50) NULL, [Inactive] [int] NULL, CONSTRAINT [PK__tbl_ProjectManag__7D78A4E7] PRIMARY KEY CLUSTERED ( [ProjectManagerID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY]
GO SET ANSI_PADDING OFF
And here is the stored procedure that I wrote (doesn't return results): SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[GetReportQuery] ( @ReportName varchar(100) )
AS
BEGIN
SET NOCOUNT ON
IF @ReportName IS NULL BEGIN RETURN -1 END ELSE BEGIN
DECLARE @DeptCode varchar(50), @ProjID varchar(50) SELECT @DeptCode = DeptCode FROM tbl_Report WHERE ReportName = @ReportName
SET @ProjID = @DeptCode + '-' + '%'
SELECT P.ProjID, P.ProjType, P.ProjectTitle, P.ProjectDetails, M.FName, M.LName, P.DateRequested, P.DueDate, S.ProjectStatus FROM tbl_Project P, tbl_ProjectManager M, tbl_ProjectStatus S WHERE ((P.ProjID = (SELECT ProjID FROM tbl_Report WHERE ((ReportName = @ReportName)))) AND (P.ProjectDetails = (SELECT ProjectDetails FROM tbl_Report WHERE ReportName = @ReportName) OR P.ProjectDetails IS NULL) AND (M.FName = (SELECT FName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.FName IS NULL) AND (M.LName = (SELECT LName FROM tbl_ProjectManager WHERE (ProjectManagerID = (SELECT ProjectManagerID FROM tbl_Report WHERE ReportName = @ReportName))) OR M.LName IS NULL) AND (P.DateRequested = (SELECT DateRequested FROM tbl_Report WHERE ReportName = @ReportName) OR P.DateRequested IS NULL) AND (P.DueDate = (SELECT DueDate FROM tbl_Report WHERE ReportName = @ReportName) OR P.DueDate IS NULL) AND (S.ProjectStatus = (SELECT ProjectStatusID FROM tbl_Report WHERE ReportName = @ReportName) OR S.ProjectStatus IS NULL) ) END
Hi all,I have a SQL job where I do the following -I check for new rows in my Table "DumpResults", every now and then and get the new rows to be inserted into table "CleanTable". I use OPENXML() to get the new data to be inserted but for some reason I don't get the right data through OPENXML() - DECLARE @intDoc INTDECLARE @xmlDoc VARCHAR(8000)IF(SELECT COUNT(*) FROM DumpResults WHERE DumpResults.C1 NOT IN (SELECT CleanTable.C1 FROM CleanTable)) > 0BEGINSET @xmlDoc = (SELECT * FROM DumpResults WHERE DumpResults.C1 NOT IN (SELECT CleanTable.C1 FROM CleanTable) FOR XML RAW) SET @xmlDoc = '<TABLE>' + @xmlDoc + '</TABLE>' PRINT @xmlDocEXEC sp_xml_preparedocument @intDoc OUTPUT, @xmlDoc--INSERT INTO CleanTable(C1, C2, C3, C4, C5) SELECT C1, C2, C3, C4, C5, C6 FROM OPENXML(@intDoc,'/row',1)WITH (C1 INT, C2 CHAR(3), C3 CHAR(3) , C4 FLOAT, C5 INT)EXEC sp_xml_removedocument @intDoc END ELSE Output that I get is - <TABLE><row C1="1" C2="AAA" C3="BBB" C4="1.000000000000000e+000" C5="2"/></TABLE>(0 row(s) affected) SO "PRINT @xmlDoc" is returning back the xml data (new results) it collected from the "DumpResults" table which isn't there in "CleanTable" but the "Select... FROM OPENXML(...)" doesn't return any result. why so? If anyone knows please reply If anyone has any better method to do it, inputs are welcome. Thanks
Hello.... I am in the process of building a search function for an application (VS2005, ASP.net, VB code, and AJAX functionality).The user's form has a textbox (for an input string) and two drop-downs. The user would then click on a "Search Now" button, and the data should populatein a Gridview to the left of the search form. I'm trying to search over an SQL database and need to know how to exactly implement what I have so far: <div id="mcb" style="background-color:#2e4b5b; width:195px; height:410px; float:left"> <div id="ht" style="background-color:#1b2c36;padding:10px; border-bottom:solid 1px #fffdff; width:175px;float:left;"> Quick Search </div><div style="clear:both;"></div> <div style="padding:10px; background-color:#2e4b5b"> <div id="tfta" style="padding:5px 0px 0px 0px"> <b>Vendor Name</b> <asp:TextBox ID="txtVendorFilter" runat="server"></asp:TextBox> <div style="font-size:1px; width:150px; height:1px; background-color:#8FA71F"></div><br /> <b>Contract Type:</b> <asp:dropdownlist ID="ddlContractTypeSearch" runat="server" Width="155px"> <asp:ListItem Value="0">Select...</asp:ListItem> <asp:ListItem Value="1">Vendor Maintenance</asp:ListItem> <asp:ListItem Value="2">Consulting Contract</asp:ListItem> <asp:ListItem Value="3">Hardware License</asp:ListItem> <asp:ListItem Value="4">Software License</asp:ListItem> <asp:ListItem Value="5">Statement of Work</asp:ListItem> <asp:ListItem Value="6">Admin Svcs. Agreement</asp:ListItem> <asp:ListItem Value="7">Master Service Agreement</asp:ListItem> </asp:dropdownlist> <div style="font-size:1px; width:150px; height:1px; background-color:#8FA71F"></div><br /> <b>Sort By:</b> <asp:DropDownList ID="ddlSortBy" runat="server" Width="155px"> <asp:ListItem Value="0">Select...</asp:ListItem> <asp:ListItem Value="1">Contract Name</asp:ListItem> <asp:ListItem Value="2">Contract Type</asp:ListItem> </asp:DropDownList> <div style="font-size:1px; width:150px; height:1px; background-color:#8FA71F"></div><br /> </div> <br /> <asp:Button ID="btnUpdateFilter" runat="server" Text="Search" width="120px"/> <asp:Button ID="btnReset" runat="server" Text="Reset" /></div> </div> Here's my select statement used to initially populate the Gridview (set up using the configuration of the Gridview):SELECT [ContractID], [ContractName], [ContractType], [EffectiveDate], [TerminationDate] FROM [Contract]Here's my btnUpdateFilter codebehind (VB): Protected Sub btnUpdateFilter_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnUpdateFilter.Click Dim strVendorName As String Dim strContractType As String Dim strSortBy As String If txtVendorFilter IsNot "" Then strVendorName = txtVendorFilter.Text End If ''''''''''''''''''''''''''''If ddlContractTypeSearch.SelectedValue = 1 Then strContractType = "1"ElseIf ddlContractTypeSearch.SelectedValue = 2 Then strContractType = "2"ElseIf ddlContractTypeSearch.SelectedValue = 3 Then strContractType = "3"ElseIf ddlContractTypeSearch.SelectedValue = 4 Then strContractType = "4"ElseIf ddlContractTypeSearch.SelectedValue = 5 Then strContractType = "5"ElseIf ddlContractTypeSearch.SelectedValue = 6 Then strContractType = "6"ElseIf ddlContractTypeSearch.SelectedValue = 7 Then strContractType = "7"Else strContractType = "0"End If ''''''''''''''''''''''''''''''If ddlSortBy.SelectedValue = 1 Then strSortBy = "ContractName"ElseIf ddlSortBy.SelectedValue = 2 Then strSortBy = "ContractType"Else strSortBy = "ContractName"End If End Sub
My question is, "how can I form the proper SQL statement", and then implement it so that my gridview will populate using my generated SQL Statement? Thank you for the help!!! -S
I need some help. I have a function that used to use ADO.NET to return a dataview. Now I'm using linq, and I don't know how to make this work anymore.my original function looked like this: public DataView getIssue() { //do some ADO, return the dataview return ds.Tables["Articles"].DefaultView; } With this I could write Gridview1.dataSource = getIssue();I want to do the same thing with Linq, but I'm running into some trouble:Here's my function now:public DataView getIssue() { var query = from a in db.Articles join i in db.Issues on a.IssueID equals i.IssueID select a; DataView dv = new DataView(); dv = query.asdatatable(); return query; }OK, first off I can't use asdatatable since I am using a join, so I can't make the results of my query a dataview. I can't return the results of my query in this function, something that seemed simple to do in Linq now seems like something that may only be possible in ADO.Thanks for your time
You know how osql can return the results of executing a .sql script to a window? Is there any way to achieve that same behavior in .NET? I am in the process of working on an application that needs to execute a .SQL script (which is easy to do) and then return the actual SQL output from the execution to a window. How do I get that output? None of the sql data objects seem to support this.
I have a query running without issue on around 100,000 results however i have a couple where my MAX aggregate is returning two results for a MAX(date time) and i cannot figure out why. I have paired down the query to try and work it out but still don't know.
My query now looks like this (i have remove most columns)
SELECT STATUS, RunOn, sort, T_ID FROM dbo.Results WHERE (RunOn IN (SELECT MAX(RunOn) FROM dbo.Results group BY T_ID) AND T_ID = 21405)
ORDER BY sort
I added the T_ID = 21405 to restrict the results to the problematic results, if i set T_ID to any other test result i get one value based on the latest RunOn, but for some reason with this T_ID i get two values, the latest one and one slightly older... The date time looks ok, i just can't work out why the latest and one older result are returned !
The original query was grouping by more items but i removed those to try and work out what is going one, as mentioned for 99.9% of results it works perfectly, but for this one i don't know.
I have a query with a nested query that is used as an in line view. When I run the whole query I keep getting slightly different results each time (10000, 10002, 10001, 9999 etc.), nothing is being changed, no jobs are running on the DB to affect the tables etc.
When I run the inline view query with the nested query, or nested query on its own, it returns same number each time.
What could potentially be the cause of this?
Using SQL Server 2008 R2 Express Edition on local W7 PC
I am new at SQL and am using SQL server express edition and im a bit stuck! I am using ASP.NET and C# in my website which is using sql database back end.
String SQLroom = "SELECT DISTINCT RoomName FROM Room INNER JOIN RoomCalendar ON Room.RoomID = RoomCalendar.RoomID WHERE Capacity = '" + reqCapacity + "' " + " AND NOT ('" + newRoomEnd + "' <= roomStartDateTime OR '" + newRoomStart + "' >= roomEndDateTime) AND (OHP = '" + ohpYesNo + "' AND AV = '" + avYesNo + "') ";
This is my SQL string... what it is trying to do is:
find the room where the capacity is the reqcapacity entered by user and the startdatetime and enddatetime entered by the user are not present in the table for that room capacity and then look at whether the user requires OHP or AV facilities, which are stored in the database as either yes or no values. The problem i am having is with the condition in the sql query... because the user may require an OHP and not AV, but then the room returned "`could" have AV facilities, as it wouldnt make a difference to them if it was there or not, basically, the yes condition has to be satisfied.
Not sure whether i should be using AND, or OR? or a combination.
I havea 2 part issue with a query I'm trying to run for a report.
I have an incident report that needs to show results based on dates from the week before. In addition, This report should run every Monday morning, with the exception of a Monday holiday, where in that case, the report will run the next business day. I have an idea to use a case statement, but it doesn't seem to work for me. Any suggestions?
Also,part of the query I have is pulling back the right data, as long as I don’t include parameters. When I do add values to the parameters the query includes all the dates. I need to see either/or - not both. I just want to either see dates without the param values or see only dates that I ask for in a parameter. Does that make sense?
FROM activities AS activities INNER JOIN incident AS incident ON activities.incid_id = incident.incid_id INNER JOIN activity_result_master AS activity_result_master ON activities.result_id = activity_result_master.result_id INNER JOIN security_users AS security_users ON incident.incid_assigned_to = security_users.name INNER JOIN incident_priority_master AS incident_priority_master ON incident.priority_id = incident_priority_master.priority_id
WHERE incident.tagged_delete_flag = 'N' AND activities.result_id = '6' AND (incid_received_date_time >= DATEADD (d,-7,GETDATE()) AND incid_closed_date_time <=DATEADD (d,-3,GETDATE())) OR CONVERT(varchar,incident.incid_received_date_time,101) >= @StartDate AND CONVERT(varchar,incident.incid_closed_date_time,101) <= @EndDate
ORDER BY incident.incid_assigned_to, incident.incid_id
Hi,I wanted to know if this is possible and if so, how do Ido it. Say, I have a query "SELECT * FROM Table WHEREColumn="some_value". This executes on a very large dataset and I would like to return the results as they queryexecutes rather than wait for the whole query to execute.Basically, I want to get the results as they are preparedby the database. Any way to do this?Regards,San
Hi, I have three tables: 1 Order Details 2 Product Info 3 Received Qty
The query is pretty simple however I'm getting incorrect results.
The query grabs a load of information (including a SUM statement) from the order details tbl.. this is INNER JOIN ed to the products tbl to match an ID field which grabs some extra info from the product info tbl.
all fairly straightforward and works without a problem..
However I now need to add in the received qty tbl (as the name suggests this keep a track of the qty's of items received)
I need to join this tbl to the order details tbl based on a unique ID from the orders tbl and then SUM together all of the entries in that received qty tbl for that item.
Result is I get a single record which shows the qty ordered (from the order details tbl), and the total received (from the received qty) tbl
These are held in a seperate tbl as an order can be deliveryed in several stages.
Here is my statement:
SELECT PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem, dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived, SUM(dbo.Suppliers_POs_Details.Qty * dbo.Suppliers_POs_Details.PricePerItem) AS LineTotal, SUM(dbo.Suppliers_POs_Details_Received.Qty) AS QtyReceived FROM dbo.Suppliers_POs_Details INNER JOIN PDS_Login.Supplier_Products ON dbo.Suppliers_POs_Details.ProductID = PDS_Login.Supplier_Products.ProductID LEFT OUTER JOIN dbo.Suppliers_POs_Details_Received ON dbo.Suppliers_POs_Details.PODetailsID = dbo.Suppliers_POs_Details_Received.PODetailsID WHERE (dbo.Suppliers_POs_Details.POID = @POID) GROUP BY dbo.Suppliers_POs_Details_Received.Qty, PDS_Login.Supplier_Products.ProductName, PDS_Login.Supplier_Products.ProductCode, dbo.Suppliers_POs_Details.POID, dbo.Suppliers_POs_Details.PODetailsID, dbo.Suppliers_POs_Details.Qty, dbo.Suppliers_POs_Details.PricePerItem, dbo.Suppliers_POs_Details.PoDetailsStatus, dbo.Suppliers_POs_Details.PoDateExpected, dbo.Suppliers_POs_Details.PODateReceived, dbo.Suppliers_POs_Details_Received.Qty
The problem is, if there is more than one relating record in teh Received Qty tbl instead of that being added together as I want, two results appear...
It's obviously something simple but I can't seem to figure it out - anyone point me in the right direction?
