And thanks to Ray for another frustrating response. Gentle suggestion, if you are going to hang out here you may find people appreciate a tad more detail than 'script it'. I consistently get a chuckle out of your responses.
View 5 RepliesRay!
I'm not DOS lover.
Can you write the command?
Thank you,
Elena.
Use dos copy command.
------------
elena at 3/13/2002 1:10:36 PM
Hi!
What should I do to copy backup file from remote server directory to my machine?
Thank you,
Elena.
Ray Miao is at it again ...( refer thread on " SQL 7.0 TEMPDB " for laughs )
John says his tempdb is growing, he cannot find a way of shrinking it other than restarting SQL Server. Ray Miao's $1.7 million answer ? Restart SQL Service !!
A simple theory should apply to these kind of forums. Be CONSTRUCTIVE !!? If you do not have a reasonably good answer for a problem, keep out !!!
Ray,
I see you answering questions out here all the time like I do, and had one question for you.
Are you really moving all of your user data from the primary (or default) filegroup into another named group like is discussed in the swynk column for up-to-the-minute recovery?
I am not clear on the benefit of doing this. It appears to me that the inability to restore to current would only happen if the primary group was corrupt, and I don't read that this happens very often.
Where are you on this issue?
Ray, I'm sending you this message because you have helped me (and many others) in the swynk forum, and I appreciate that. I just joined this new forum, and can't do a search using "SQL" because it doesn't have at least 4 letters. Is it possible that we have a SQL forum where SQL is not allowed in searches?? Are they kidding? Respectfully, Robert Boyd
View 1 Replies View RelatedThank you Ray Miao, you are correct the NT Admin password was changed. Now I'm not sure what the best Startup Service configuration should be.
What are the implications of starting the service as a System Account vs specifing a specific account?
Thanks,
Paul
I was having a problem installing SP1, it would barely get started before it would fail. I found it had to do with having many of my databases on an external USB drive. I detached all of those databases, rebooted the machine and then attempted to re-install the Service Pack. This time everything worked fine. Just passing it along in case someone else ran into this.
View 2 Replies View RelatedRay or Someone please help!
I have not aliased pager as dbo. Are you suggesting to try this? I want the replicated tables to show a db owner of 'pager'. Here is another description of my situation (I think the first one may have been confusing):
I have a Database named Page with 'sa' as the db owner. The objects (tables and sps) of this database have the owner 'pager'. This is the way the database is defined on the Publication and Subscription Servers. But, when the replication process is completed, the replicated tables on the Subscription Server have the owner 'dbo'. I want my replicated tables on my Subscription Server to have the owner 'pager'. So, that the 4 replicated tables will have the same db owner as the existing tables on the Page Database.
Is this happening because I have the NT trusted connection which points to 'sa' on the SQL Server? If so, can I change the trusted connection to point to 'pager'? I am just guessing at this point. I will continue to research this issue. Someone has suggested that I go into EM, Manage Logins, select 'pager', and put 'dbo' in the Alias column for the replicated database (Page Db) row. I will try this.
Thanks in advance, Kevin
-----------
If you alias pager as dbo, the object created by pager will show owner of dbo. This is the way sql6.5 works, but sql7 will show pager as owner.
------------
Kevin G. at 11/22/99 5:14:22 PM
I am in the process of replicating a table within a workgroup setup (not a Domain).
I notice that when the table is created on the Subscription Server the replication process is creating the tables with a db owner of (dbo). I want the tables to be created with 'pager' as the owner. 'pager' is already defined as a db owner in the source and destination database. In the Publication Server Source Database, 'pager' is the owner of the tables selected for replication.
How can I accomplish this? Currently, I am doing the following on both the Publication and Subscriber Servers: logging on NT as 'Administrator' and starting both services (MSSQLServer and SQLExecutive) with the 'sqlnt2' NT Login which is a member of the NT Administrators Group. The NT Administrators Group has been trusted to SQL Server on both machines.
I am using the NT4.0, SP3 and SQL Server 6.5 with SP5a.
Thanks in advance, Kevin
Can anyone help me with handy scripts/stored procedures to capture blocking info on the server? We have SQL 7.0 w/sp3.
Ray replied earlier saying that I can use so_who2!!, I think everyone knows that,please reply with some valuable info!!Please..
Thanks.
Sonali.
Thanks. I worry about my setup information may be have some issue.I can't express it in word.so please tell me you e-mail address,i will send a document to you.
Some information may be useful,i had did same thing with another database,it's normal in 1 day.
I have job in SQL Server 2000 that is setup to notify an email operator upon successful completion.
When I test the notification to the set email operator it sends the email just fine.
When the job is run manually it emails the operator just fine.
When the job is run on a schedule it does not email the operator upon completion. It gives the details in view job history "NOTE: Failed to notify '<operator>' via email.
I have other jobs on the same server that run and notify via email to other operators upon successful completion just fine.
I have parsed MS Technet and the web and did not find anything.
Any help is greatly appreciated.
This isn't a performance type of question, or whose CPU is bigger, but I'm more interested in knowing what people use out there as far as monitor setups go.
The root of the question stems from working in large package where there are many components laid out on the work flow. What do you use to work with large layouts? I constantly find it troubling to view enough of my package and am always zooming out to see more of the package. However, when doing that, the text becomes unreadable, of course.
I currently use a dual-monitor setup using my laptop and a LCD flat screen.
Resolutions on the laptop is 1920 x 1200 and the LCD monitor is 1280 x 1024. This helps to keep windows and output screens on one monitor while keeping the work flow on the other. Even still, I wish I had more screen real estate.
So, what say you?
Hi,
I am trying to install SQL server 2005 developer edition on Win XP SP2.
I am getting error during Database Services install throwing a log (part of it)
Property(S): FTERegRudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C = MSSQL.1
Property(S): FTEUPGRADE.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgrade30.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): FTEUpgradeMSSearchApp.68C6D15C_77E0_11D5_8528_00C04F68155C = SQLServer
Property(S): FTEUpgradeMSSearchStandalone.68C6D15C_77E0_11D5_8528_00C04F68155C = 0
Property(S): CostingComplete = 1
Property(S): FTEInstID.68C6D15C_77E0_11D5_8528_00C04F68155C = 1
Property(S): FTEAppID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D318-77E0-11D5-8528-00C04F68155C}
Property(S): FTEAdminCLSID.68C6D15C_77E0_11D5_8528_00C04F68155C = {68C6D37C-77E0-11D5-8528-00C04F68155C}
Property(S): FTEIFTEAdmin.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bd6f-cc0d-11d6-9a15-505054503030}
Property(S): FTEMSFTEPXY.68C6D15C_77E0_11D5_8528_00C04F68155C = {64f6bdd4-cc0d-11d6-9a15-505054503030}
Property(S): FTEServiceName.68C6D15C_77E0_11D5_8528_00C04F68155C = msftesql
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 0
Property(S): PrimaryVolumeSpaceRequired = 0
Property(S): PrimaryVolumeSpaceRemaining = 0
Property(S): RSVirtualDirectoryManager = Reports
Property(S): RSVirtualDirectoryServer = ReportServer
Property(S): SqlActionManaged = 3
Property(S): SqlStateManaged = 2
Property(S): SOURCEDIR = D:Setup
Property(S): SourcedirProduct = {2373A92B-1C1C-4E71-B494-5CA97F96AA19}
Property(S): InstallNgenTicks = 20000
Property(S): SQLBROWSERSCMACCOUNT = CORPNBDQT5O
Property(S): AGTSCMACCOUNT = CORPNBDQT5O
Property(S): SQLSCMACCOUNT = CORPNBDQT5O
Property(S): DebugClsid.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = {7E6E77F5-0576-4DAF-A405-B9184C5DD85A}
Property(S): ProductToBeRegistered = 1
MSI (s) (AC:94) [11:53:33:621]: Note: 1: 1708
MSI (s) (AC:94) [11:53:33:621]: Product: Microsoft SQL Server 2005 -- Installation failed.
Could somebody help, please?
Amol
904-987-7972
hi, I am working on SQL server 6.5 using a desk top. Now I am about to buy a note book and do some development work. As far as I know, win 95,98 does not support SQL server 6.5
But SQL sever 7.0 does support win 95,98 Am I correct?
I am confuzed, what notebook operating system shall I buy which will allow me to work on sql development on the road.
another issues is what if I choose to use win 98 for sql server 7.0 what are the things that I will be missing . In other word, what are the limitation that I may have when acquiring win 98 as an operating system for sql server 7.0..
thanks for your advice
regards
Ali
I have created a publisher with row filtering using merge replication .I configured 5-6 subscribers for it.It was working fine for 2 months.But now for two subscribers its showing an error Process could not deliver update (s) at the publisher
Ive checked the job history..its showing
Merge process encountered an unexpected network error. The connection to tublisher 'Publishername' is no longer available
can any one help me?
thanks and regards
Dhanya
I will try the mixed security tomorrow. I have in the mean time discovered that I am not able to use the odbcping.exe utility successfully. It returns the same 08001 error message (Specified SQL Server not found). Does this means that the problem is within ODBC? What are somethings that I can try?
Thanks, Kevin
-----------
You need mixed security, also check password of the sql service account on nt.
------------
Kevin G. at 3/8/00 3:21:47 PM
I have set up replication on two SQL Servers (6.5), SP5a, on NT 4.0 (SP3). The Distribution Task on the Publisher is failing with the following error:
08001[Microsoft][ODBC SQL Server Driver][dbnmpntw]Specified SQL Server not found.
I am using standard security in a workgroup environment. I have my trusted connection setup and I am using named pipes. I had this process working on our test servers but when I tried to implement it into production I received the above message. Please give me some ideas or things to try. What source can I use to look up the 08001 error?
Thanks, Kevin
any tricks to separate this column from:
"testlname,testfname comment section > comment section testlname,testfname 6/30/2015 9:05:58 AM > testlname,testfname 6/30/2015 9:06:18 AM > comment section testlname,testfname 6/30/2015 9:10:05 AM > comment section"
to:
col1 Col2 col3
testlname,testfname 6/30/2015 9:05:58 AM comment section
testlname,testfname 6/30/2015 9:06:18 AM comment section
testlname,testfname 6/30/2015 9:10:05 AM comment section
Hi,
I first attempted to install SQL Server 2005 with the management tools, SQL server services installed ok but the management tools did not install. I tried to re-install the management tools but the setup program thought that they were already installed. I then un-installed everything in Add/Remove programs, & rebooted. I then tried to install again but this time it thought that the SQL server services were already installed. I removed the services from the registry and rebooted again. Now when I try to install SQL Server 2005 it simply fails
The last message in the log is "Note: 1: 1708
MSI (s) (A0:6C) [15:34:23:656]: Product: Microsoft SQL Server 2005 -- Installation failed"
Any help would be appreciated
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1MSSQLServer 3: 2
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1325 2: v2.0.50727
MSI (s) (A0:6C) [15:34:22:593]: PROPERTY CHANGE: Adding ASPNET_EVENTLOGDLL.6BAD20EB_8CBD_4950_9F16_9F83B608665D property. Its value is 'C:WINDOWSMicrosoft.NETFrameworkv2.0.50727EventLogMessages.dll'.
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2
MSI (s) (A0:6C) [15:34:22:593]: Note: 1: 1402 2: HKEY_LOCAL_MACHINESoftwareMicrosoftMicrosoft SQL ServerMSSQL.1Replication 3: 2
MSI (s) (A0:6C) [15:34:22:609]: Doing action: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:22: AppSearch. Return value 1.
MSI (s) (A0:74) [15:34:22:609]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B6.tmp, Entrypoint: DetectSKUOS
Action start 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=DetectSKUOS
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: DetectSKUOS
PerfTime Start: DetectSKUOS : Thu Feb 22 15:34:22 2007
<Func Name='DetectSKUOS'>
VersionNT/64 detected
MsiNTProductType = 3
OS type: 0xf0000000, supported: 0xfff0ff00
<EndFunc Name='DetectSKUOS' Return='0' GetLastError='0'>
PerfTime Stop: DetectSKUOS : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: DetectWYukonOS.D20239D7_E87C_40C9_9837_E70B8D4882C2 (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetErrorReporting (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Skipping action: SetSqmReporting (condition is false)
MSI (s) (A0:6C) [15:34:22:687]: Doing action: SetEnableRanu
Action ended 15:34:22: DetectSKUOS.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:22:687]: PROPERTY CHANGE: Modifying SqlEnableRanu property. Its current value is '0'. Its new value: '1'.
Action start 15:34:22: SetEnableRanu.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: CCPSearch
Action ended 15:34:22: SetEnableRanu. Return value 1.
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 15:34:22: CCPSearch.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: RMCCPSearch
Action ended 15:34:22: CCPSearch. Return value 0.
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (A0:6C) [15:34:22:687]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 15:34:22: RMCCPSearch.
MSI (s) (A0:6C) [15:34:22:687]: Doing action: RestoreProductID
Action ended 15:34:22: RMCCPSearch. Return value 0.
MSI (s) (A0:20) [15:34:22:703]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B7.tmp, Entrypoint: RestoreProductID
Action start 15:34:22: RestoreProductID.
<Func Name='LaunchFunction'>
Function=RestoreProductID
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: RestoreProductID
PerfTime Start: RestoreProductID : Thu Feb 22 15:34:22 2007
<Func Name='RestoreProductID'>
<EndFunc Name='RestoreProductID' Return='0' GetLastError='0'>
PerfTime Stop: RestoreProductID : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:765]: Doing action: SetShowPID
Action ended 15:34:22: RestoreProductID. Return value 1.
MSI (s) (A0:6C) [15:34:22:781]: PROPERTY CHANGE: Adding ShowPID property. Its value is '1'.
Action start 15:34:22: SetShowPID.
MSI (s) (A0:6C) [15:34:22:781]: Doing action: ValidatePID
Action ended 15:34:22: SetShowPID. Return value 1.
MSI (s) (A0:50) [15:34:22:781]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B8.tmp, Entrypoint: ValidateProductID
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding CCPTrigger property. Its value is '2'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PKU property. Its value is '0'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDSEQ property. Its value is '271000003'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding ProductID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DPID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding DigitalProductID property. Its value is '**********'.
MSI (s) (A0!58) [15:34:22:843]: PROPERTY CHANGE: Adding PIDRET property. Its value is '0'.
Action start 15:34:22: ValidatePID.
MSI (s) (A0:6C) [15:34:22:843]: Doing action: DetectProductID
Action ended 15:34:22: ValidatePID. Return value 1.
MSI (s) (A0:20) [15:34:22:859]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2B9.tmp, Entrypoint: DetectProductID
Action start 15:34:22: DetectProductID.
<Func Name='LaunchFunction'>
Function=DetectProductID
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: DetectProductID
PerfTime Start: DetectProductID : Thu Feb 22 15:34:22 2007
<Func Name='DetectProductID'>
<EndFunc Name='DetectProductID' Return='0' GetLastError='0'>
PerfTime Stop: DetectProductID : Thu Feb 22 15:34:22 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetPIDKEY
Action ended 15:34:22: DetectProductID. Return value 1.
MSI (s) (A0:6C) [15:34:22:937]: PROPERTY CHANGE: Deleting PIDKEY property. Its current value is '**********'.
Action start 15:34:22: SetPIDKEY.
MSI (s) (A0:6C) [15:34:22:937]: Doing action: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:22: SetPIDKEY. Return value 1.
MSI (s) (A0:4C) [15:34:22:953]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BA.tmp, Entrypoint: SetValidMOFInstanceNameProp
Action start 15:34:22: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SetValidMOFInstanceNameProp
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SetValidMOFInstanceNameProp
PerfTime Start: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007
<Func Name='SetValidMOFInstanceNameProp'>
MSI (s) (A0!60) [15:34:23:109]: PROPERTY CHANGE: Adding ValidMOFInstanceName property. Its value is '1'.
Setting ValidMofInstanceName to 1
<EndFunc Name='SetValidMOFInstanceNameProp' Return='0' GetLastError='0'>
PerfTime Stop: SetValidMOFInstanceNameProp : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:109]: Doing action: CostInitialize
Action ended 15:34:23: SetValidMOFInstanceNameProp.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:23:125]: Machine policy value 'MaxPatchCacheSize' is 10
Action start 15:34:23: CostInitialize.
MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding ROOTDRIVE property. Its value is 'D:'.
MSI (s) (A0:6C) [15:34:23:125]: PROPERTY CHANGE: Adding CostingComplete property. Its value is '0'.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Transforming table Component.
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: Patch
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: MsiPatchHeaders
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: __MsiPatchFileList
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (A0:6C) [15:34:23:125]: Note: 1: 2228 2: 3: PatchPackage 4: SELECT `DiskId`, `PatchId`, `LastSequence` FROM `Media`, `PatchPackage` WHERE `Media`.`DiskId`=`PatchPackage`.`Media_` ORDER BY `DiskId`
MSI (s) (A0:6C) [15:34:23:125]: Doing action: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:23: CostInitialize. Return value 1.
MSI (s) (A0:C4) [15:34:23:140]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BC.tmp, Entrypoint: SetFTSearchProperties
Action start 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SetFTSearchProperties
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SetFTSearchProperties
PerfTime Start: SetFTSearchProperties : Thu Feb 22 15:34:23 2007
<Func Name='SetFTSearchProperties'>
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'MSSQLSERVER'. Its new value: 'MSSQL.1'.
FTS Property Name: FTEInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Modifying FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its current value is 'SoftwareMicrosoftMSSQLSERVERMSSearch'. Its new value: 'SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL.1MSSearch'.
FTS Property Name: FTERudeInstName.68C6D15C_77E0_11D5_8528_00C04F68155C set
MSI (s) (A0!C0) [15:34:23:250]: PROPERTY CHANGE: Adding FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C property. Its value is 'MSSQL.1MSSQL'.
FTS Property Name: FTERegRoot.68C6D15C_77E0_11D5_8528_00C04F68155C set
FTS Property Name: FTEInstanceSubDir.68C6D15C_77E0_11D5_8528_00C04F68155C set
FTS Property Name: FTEClusterSec.68C6D15C_77E0_11D5_8528_00C04F68155C set
<EndFunc Name='SetFTSearchProperties' Return='0' GetLastError='0'>
PerfTime Stop: SetFTSearchProperties : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:265]: Doing action: FileCost
Action ended 15:34:23: SetFTSearchProperties.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Class 3: -2147287038
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: Extension 3: -2147287038
MSI (s) (A0:6C) [15:34:23:281]: Note: 1: 2262 2: TypeLib 3: -2147287038
Action start 15:34:23: FileCost.
MSI (s) (A0:6C) [15:34:23:281]: Doing action: IsolateComponents
Action ended 15:34:23: FileCost. Return value 1.
Action start 15:34:23: IsolateComponents.
MSI (s) (A0:6C) [15:34:23:281]: Doing action: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2
Action ended 15:34:23: IsolateComponents. Return value 0.
MSI (s) (A0:50) [15:34:23:296]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BD.tmp, Entrypoint: SQLLicensing
Action start 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2.
<Func Name='LaunchFunction'>
Function=SQLLicensing
<Func Name='SetCAContext'>
<EndFunc Name='SetCAContext' Return='T' GetLastError='0'>
Doing Action: SQLLicensing
PerfTime Start: SQLLicensing : Thu Feb 22 15:34:23 2007
<Func Name='SQLLicensing'>
<EndFunc Name='SQLLicensing' Return='0' GetLastError='0'>
PerfTime Stop: SQLLicensing : Thu Feb 22 15:34:23 2007
<EndFunc Name='LaunchFunction' Return='0' GetLastError='0'>
MSI (s) (A0:6C) [15:34:23:375]: Doing action: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C
Action ended 15:34:23: SQLLicensing.D20239D7_E87C_40C9_9837_E70B8D4882C2. Return value 1.
MSI (s) (A0:54) [15:34:23:390]: Invoking remote custom action. DLL: C:WINDOWSInstallerMSI2BE.tmp, Entrypoint: ResolveInstanceName
Action start 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C.
FTECa.DLL: INFO: FTE: ResolveInstanceName(), Entering...
FTECa.DLL: INFO: FTE: This is NOT an Exchange Server install...
FTECa.DLL: INFO: ResolveInstanceName: FTEInstName obtained: MSSQLSERVER
FTECa.DLL: INFO: ResolveInstanceName: FTERudeInstName obtained: MSSQL.1
FTECa.DLL: INFO: LookupInstanceId: Iterating the key: 1
FTECa.DLL: ERROR: LookupInstanceId: RegQueryValueEx(RudeName) failed. Err = 2
Action ended 15:34:23: CAResolveInstanceName.68C6D15C_77E0_11D5_8528_00C04F68155C. Return value 3.
Action ended 15:34:23: INSTALL. Return value 3.
Property(S): ProductCode = {FFFA78A7-BD51-4255-8470-C4D4A85B49F5}
Property(S): ProductLanguage = 1033
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 9.00.1399.06
Property(S): MEDIAPACKAGEPATH = Setup
Property(S): ALLUSERS = 1
Property(S): NULLGUID = {00000000-0000-0000-0000-000000000000}
Property(S): ASPNetVersion = 2.0.50727
Property(S): ARPHELPLINK = http://go.microsoft.com/fwlink/?LinkId=52152
Property(S): ARPPRODUCTICON = ARPIcon.ico
Property(S): ARPNOREPAIR = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): MsiHiddenProperties = SQLPASSWORD;AGTPASSWORD;ASPASSWORD;RSPASSWORD;SQLBROWSERPASSWORD;RSSQLPASSWORD;RSSQLPassword;RSSQLPasswordQuoted;RSSETUPPASSWORD;RSSetupPassword;SAPWD;saPWD;UPGRADEPWD;SqlUpgradePwd;SQLPassword;ServicePassword;ADMINPASSWORD;PIDKEY;FTEPassword.68C6D15C_77E0_11D5_8528_00C04F68155C;checksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C;checksum.;DigitalProductID;DPID;Do_sqlScript.D20239D7_E87C_40C9_9837_E70B8D4882C2;Rollback_SqlConnection.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_XmlSingleNode.D20239D7_E87C_40C9_9837_E70B8D4882C2;Do_RSSetting.D20239D7_E87C_40C9_9837_E70B8D4882C2;PID;ProductID;RSUPGRADEPASSWORD;Do_RSSetSharePointExclusionPath.D20239D7_E87C_40C9_9837_E70B8D4882C2
Property(S): SecureCustomProperties = SQL_SHOWLIC;UPGRADESQL90
Property(S): SqlServerBuild = 1
Property(S): SqlCluster = 0
Property(S): INSTALLLEVEL = 90
Property(S): FXAssemblyVersion = 2.0.0.0
Property(S): VSAssemblyVersion = 8.0.0.0
Property(S): SqlErrorReporting = #0
Property(S): SqlSqmReporting = #0
Property(S): SqlEnableRanu = 1
Property(S): SqlPatchLevel = 9.00.1399.06
Property(S): ChannelID = 271
Property(S): PIDTemplate = 77654<````=````=````=````=`````>@@@@@
Property(S): mpc = 77654
Property(S): OEMRelease = 0
Property(S): SQLSETUPBOOTSTRAPSETUPPATH = C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe
Property(S): SQLSETUPARPWRAPPER = C:Program FilesMicrosoft SQL Server90Setup BootstrapARPWrapper.exe
Property(S): UPGRADE_ADVISOR_CMD32 = C:Program FilesMicrosoft SQL Server90Setup Bootstrap
Property(S): SQLIEMINVERSION = C:WINDOWSsystem32shdocvw.dll
Property(S): ProgramFilesFolder = C:Program Files
Property(S): ProductID = **********
Property(S): DigitalProductID = **********
Property(S): INSTALLSQLDIR = D:Program FilesMicrosoft SQL Server
Property(S): INSTALLSQLDATADIR = D:Program FilesMicrosoft SQL Server
Property(S): SqlCollation = Latin1_General_CI_AS
Property(S): SqlInstanceName = MSSQLSERVER
Property(S): saSetAutoSAPWDAndDisable = 1
Property(S): ShowPID = 1
Property(S): MDACSXS = 1
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 502
Property(S): LocalSystemAccount = NT AUTHORITYSYSTEM
Property(S): DefaultBuiltInAccount = LocalSystemAccount
Property(S): NetworkServiceAccount = NT AUTHORITYNETWORK SERVICE
Property(S): LocalServiceAccount = NT AUTHORITYLOCAL SERVICE
Property(S): INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server
Property(S): UI_INSTALLSQLSHAREDDIR = D:Program FilesMicrosoft SQL Server
Property(S): SimpleFeatureTitle_Feat1 = SQL Server Database Services
Property(S): SqlDisableNetworkProtocols = 2
Property(S): SimpleFeature_SQLEngineVS = Create a SQL Server failover cluster
Property(S): SimpleFeature_Feat1 = &SQL Server Database Services
Property(S): Service_AGT = SQL Server Agent
Property(S): Service_OLAP = SQL Server Analysis Services
Property(S): Service_SQL = SQL Server
Property(S): Service_RS = SQL Server Reporting Services
Property(S): Service_Browse = SQL Server Browser
Property(S): Service_DTS = SQL Server Integration Services
Property(S): Service_ADHelper = SQL Server Active Directory Helper
Property(S): Service_SQLWriter = SQL Server VSS Writer
Property(S): Service_FTS = SQL Server FullText Search
Property(S): ServiceDesc_RS = Manages, executes, renders, schedules and delivers reports.
Property(S): ServiceDesc_AGT = Executes jobs, monitors SQL Server, and fires alerts, and allows automation of some administrative tasks.
Property(S): ServiceDesc_SQL = Provides storage, processing and controlled access of data and rapid transaction processing.
Property(S): ServiceDesc_Browse = Provides SQL Server connection information to client computers.
Property(S): ServiceDesc_OLAP = Supplies online analytical processing (OLAP) and data mining functionality for business intelligence applications.
Property(S): ServiceDesc_DTS = Provides management support for SSIS package storage and execution.
Property(S): ServiceDesc_ADHelper = Enables integration with Active Directories.
Property(S): ServiceDesc_SQLWriter = Provides the interface to backup/restore Microsoft SQL server through the Windows VSS infrastructure.
Property(S): ServiceDesc_FTS = Quickly creates full-text indexes on content and properties of structured and semi-structured data to allow fast linguistic searches on this data.
Property(S): ServiceGroupDesc_ADHelper = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Active Directory Helper in SQL Server 2005.
Property(S): ServiceGroupDesc_AGT = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Agent in SQL Server 2005.
Property(S): ServiceGroupDesc_OLAP = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Analysis Services in SQL Server 2005.
Property(S): ServiceGroupDesc_Browse = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Browser in SQL Server 2005.
Property(S): ServiceGroupDesc_DTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Integration Services in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_NS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Notification Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RS = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005.
Property(S): ServiceGroupDesc_RSWeb = Members in the group have the required access to be assigned as the log on account for the associated instance of SQL Server Reporting Services in SQL Server 2005
Property(S): ServiceGroupDesc_SQL = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server and SQL Server FullText Search in SQL Server 2005.
Property(S): ServiceGroupDesc_SQL_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server in SQL Server 2005.
Property(S): ServiceGroupDesc_FTS_NEW = Members in the group have the required access and privileges to be assigned as the log on account for the associated instance of SQL Server Full Text Search in SQL Server 2005.
Property(S): DlgService_AGT = SQL Server Agent
Property(S): DlgService_OLAP = Analysis Services
Property(S): DlgService_SQL = SQL Server
Property(S): DlgService_RS = Reporting Services
Property(S): DlgService_Browse = SQL Browser
Property(S): AutoStart_AGT = SQL Server A&gent
Property(S): AutoStart_OLAP = &Analysis Services
Property(S): AutoStart_SQL = &SQL Server
Property(S): AutoStart_RS = Rep&orting Services
Property(S): AutoStart_Browse = SQL Bro&wser
Property(S): AutoStart_FTS = SQL Server &FullText Search
Property(S): _AuthenticationType = Windows
Property(S): SQL_rgCollation = 1
Property(S): OLAP_rgCollation = 0
Property(S): _InstanceType = Default
Property(S): _LicensingMode = PerSeat
Property(S): AGTLogin = DomainAccount
Property(S): ASLogin = DomainAccount
Property(S): SingleLogin = DomainAccount
Property(S): SQLLogin = DomainAccount
Property(S): RSLogin = DomainAccount
Property(S): SQLBROWSERLogin = DomainAccount
Property(S): _UpgradeLogon = Windows
Property(S): _SampleDBMode = InstallSD
Property(S): ButtonTextStyle = {ButtonTextStyle}
Property(S): DlgTextStyle = {DlgTextStyle}
Property(S): DlgTextStyleB = {DlgTextStyleB}
Property(S): DlgTitleStyle = {DlgTitleStyle}
Property(S): DlgTitleStyleB = {DlgTitleStyleB}
Property(S): FixedStyle = {FixedStyle}
Property(S): T_DataFree = T_DataFree
Property(S): T_DataReq = T_DataReq
Property(S): T_ProgramFree = T_ProgramFree
Property(S): T_ProgramReq = T_ProgramReq
Property(S): T_IPVal = T_IPVal
Property(S): T_Subnet = T_Subnet
Property(S): ErrorDialog = ErrorDlg
Property(S): TextVSName = &Virtual server name:
Property(S): ENABLERANU = 1
Property(S): AccountForAllNodesDlg_Desc = Account for remote setup.
Property(S): AccountForAllNodesDlg_Text = Enter a user name and password that is a valid administrator account for all nodes in the cluster system. This will be used during setup only.
Property(S): AccountForAllNodesDlg_Title = Remote Account Information
Property(S): Authentication_ConfirmPWText = Confirm &password:
Property(S): Authentication_DlgDesc = The authentication mode specifies the security used when connecting to SQL Server.
Property(S): Authentication_DlgText = Select the authentication mode to use for this installation.
Property(S): Authentication_DlgTitle = Authentication Mode
Property(S): Authentication_EnterPWText = &Enter password:
Property(S): Authentication_saPasswordText = Specify the sa logon password below:
Property(S): Authentication_SQL = &Mixed Mode (Windows Authentication and SQL Server Authentication)
Property(S): Authentication_Windows = &Windows Authentication Mode
Property(S): BrowseFolder_ComboText = &Install in:
Property(S): BrowseFolder_DlgDesc = You can select a different folder for installation.
Property(S): BrowseFolder_DlgTitle = Change Folders
Property(S): BrowseFolder_TailText = Installation &path:
Property(S): BrowseFolder_TailTextShared = The SQL Server shared path has already been configured.
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Add = &Add
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Browse = B&rowse...
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_Complete = &Complete
Property(S): ButtonText_ContinueLater = &Continue Later
Property(S): ButtonText_DiskCost = &Disk Cost...
Property(S): ButtonText_Exit = &Exit
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Help = &Help
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Minimal = &Minimal
Property(S): ButtonText_New = &New
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_No = &No
Property(S): ButtonText_Normal = &Normal
Property(S): ButtonText_OK = OK
Property(S): ButtonText_Open = &Open
Property(S): ButtonText_Reinstall = &Reinstall
Property(S): ButtonText_ReinstallMode = &Select the reinstall mode
Property(S): ButtonText_Remove = &Remove
Property(S): ButtonText_Remove2 = &Remove
Property(S): ButtonText_Report = &Report
Property(S): ButtonText_Reset = &Reset
Property(S): ButtonText_Restore = &Restore
Property(S): ButtonText_Resume = &Resume
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Up = &Up
Property(S): ButtonText_Yes = &Yes
Property(S): Cancel_DlgDesc = Are you sure you want to cancel the installation?
Property(S): Cancel_DlgText = The installation is not complete. If you exit the wizard now, Microsoft SQL Server will not be installed.
Property(S): ClusterGroup_DlgDesc = Select the cluster group where the virtual server resources will be installed.
Property(S): ClusterGroup_DlgStaticTextAvailable = Available cluster groups:
Property(S): ClusterGroup_DlgStaticTextUnavailable = Unavailable cluster groups:
Property(S): ClusterGroup_DlgTitle = Cluster Group Selection
Property(S): ClusterNodeDlg_ButtonTextAdd = &Add ->
Property(S): ClusterNodeDlg_ButtonTextRemove = <- &Remove
Property(S): ClusterNodeDlg_StaticTextAvailableNode = Available nodes:
Property(S): ClusterNodeDlg_StaticTextRequiredNode = Required node:
Property(S): ClusterNodeDlg_StaticTextSelectedNode = Selected nodes:
Property(S): ClusterNodeDlg_StaticTextUnavailableNode = Unavailable nodes:
Property(S): ClusterNodeDlg_Text = Select the nodes to include in the virtual server.
Property(S): ClusterNodeDlg_Title = Cluster Node Configuration
Property(S): Collation_Service = S&ervice:
Property(S): Collation_Service1 = Collation settings for service:
Property(S): Collation_AS_Collation = Analysis Services Collation:
Property(S): Collation_ChkBinary = Binary
Property(S): Collation_ChkBinary2 = Binary - code point
Property(S): Collation_ChkCase = Case - sensitive
Property(S): Collation_ChkAccent = Accent - sensitive
Property(S): Collation_ChkKana = Kana - sensitive
Property(S): Collation_ChkWidth = Width - sensitive
Property(S): Collation_Designator = Collation &designator and sort order:
Property(S): Collation_DlgDesc = Collation settings define the sorting behavior for your server.
Property(S): Collation_DlgCusomizeText = &Customize for each service account
Property(S): Collation_DlgTitle = Collation Settings
Property(S): Collation_SQL = &SQL collations (used for compatibility with previous versions of SQL Server)
Property(S): DiskPrompt = Please insert next disk
Property(S): DiskSpace_DlgDesc = Disk space required for the installation exceeds available disk space.
Property(S): DiskSpace_DlgDesc1 = The available disk space and the space required for installation are shown below.
Property(S): DiskSpace_DlgText = The highlighted volumes, if any, do not have enough disk space available for the currently selected features. Click Disk Cleanup to free disk space and then click Resume to continue the installation, or click Exit to exit the wizard.
Property(S): DiskSpace_DlgTitle = Out of Disk Space
Property(S): DiskSpace_DlgTitle1 = Disk Cost
Property(S): DiskSpace_LBDiskCleanup = Use disk cleanup to free more disk space by removing unneeded files.
Property(S): REASON_ADMIN_DISABLED = Administrative shares must be enabled in order to let Setup access remote nodes
Property(S): REASON_DARWIN_VER = Windows installer is not present or has not the required version
Property(S): REASON_DUP_INSTANCE_NAME_CLST = An instance with the same name is already installed in one or more nodes of the cluster.
Property(S): REASON_GROUP_HOSTS_VS = Already contains a SQL Virtual Server
Property(S): REASON_GROUP_NO_DISK = Does not contain any valid cluster disk
Property(S): ERROR_INVALID_PID = This is an invalid Product Key value. Please check the number located on your Product Key sticker.
Property(S): ERROR_INVALID_USERNAME = The Name is required for the installation.
Property(S): REASON_NODE_DOWN = The node is down or unavailable
Property(S): REASON_NOT_KNOWN = Unknown
Property(S): REASON_PENDING_REBOOT = The node must be rebooted before running setup
Property(S): REASON_SCC_CHECK_FAILED = A SCC check failed on the node
Property(S): ERROR_UNKNOWN = Installation error. Install it by running setup.exe.
Property(S): REASON_VERSION_ADDNODE = Adding nodes to the Virtual Server definition using a newer version of Setup is not allowed.
Property(S): REASON_OS_VER = SQL Server requires Windows 2000 Service Pack 4, or Windows XP Service Pack 1 or later for installation.
Property(S): REASON_OS_TYPE = This version of SQL Server is not supported on this version of Windows.
Property(S): Exit_DlgDesc1 = Setup has installed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc2 = Setup has removed Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc3 = Setup has updated Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc4 = Setup has reinstalled Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgDesc5 = Setup has upgraded Microsoft SQL Server successfully. Click Finish to exit.
Property(S): Exit_DlgTitle = Completing Microsoft SQL Server Setup
Property(S): SimpleFeature_DlgDesc = Select the components to install or upgrade.
Property(S): SimpleFeature_DlgTitle = Components to Install
Property(S): SimpleFeature_Feat2 = &Analysis Services
Property(S): SimpleFeature_AnalysisServerVS = Create an Analysis Server failover cluster
Property(S): SimpleFeature_Feat3 = &Reporting Services
Property(S): SimpleFeature_Feat4 = N&otification Services
Property(S): SimpleFeature_Feat5 = &Integration Services
Property(S): SimpleFeature_Feat6 = &Workstation components, Books Online and development tools
Property(S): SimpleFeatureTitle_Feat2 = Analysis Services
Property(S): SimpleFeatureTitle_Feat3 = Reporting Services
Property(S): SimpleFeatureTitle_Feat4 = Notification Services
Property(S): SimpleFeatureTitle_Feat5 = Integration Services
Property(S): SimpleFeatureTitle_Feat6 = Client Components
Property(S): SimpleFeature_Advanced = A&dvanced
Property(S): SimpleFeature_AdvancedText = For more options, click Advanced.
Property(S): SimpleFeature_Components = Components to be installed
Property(S): SimpleFeature_OutOfSpace = There is not enough disk space to install the selected components. Click Advanced for more options.
Property(S): Feature_DlgDesc = Select the program features you want installed.
Property(S): Feature_DlgText = Click an icon in the following list to change how a feature is installed.
Property(S): Feature_DlgTitle = Feature Selection
Property(S): Feature_FeatureFrame = Feature description
Property(S): Feature_GroupBox1 = Installation path
Property(S): FileInUse_DlgDesc = Some files that need to be updated are currently in use.
Property(S): FileInUse_DlgText = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): FileInUse_DlgTitle = Files in Use
Property(S): InitDlg_Title = Microsoft SQL Server Installation
Property(S): InitDlg_Desc = Setup is preparing to continue with the installation.
Property(S): InitDlg_Text = Please wait while setup prepares to continue with the installation.
Property(S): Instance_Default = &Default instance
Property(S): Instance_DlgDesc = You can install a default instance or you can specify a named instance.
Property(S): Instance_DlgText = Provide a name for the instance. For a default installation, click Default instance and click Next. To upgrade an existing default instance, click Default instance. To upgrade an existing named instance select Named instance and specify the instance name.
Property(S): Instance_DlgText1 = To view a list of existing instances and components click on Installed instances.
Property(S): Instance_DlgTitle = Instance Name
Property(S): Instance_Named = N&amed instance
Property(S): IPAddress_DlgDesc = Enter virtual server information.
Property(S): IPAddress_DlgStaticTextClusterIP = Network address:
Property(S): IPAddress_DlgStaticTextIPAddress = &IP address:
Property(S): IPAddress_DlgStaticTextIPSel = &Selected networks and IP addresses:
Property(S): IPAddress_DlgStaticTextNetToUse = N&etwork to use:
Property(S): IPAddress_DlgStaticTextSubnet = Network subnet:
Property(S): IPAddress_DlgStaticTextVSName = Virtual server name:
Property(S): IPAddress_DlgText = Enter an IP address for the virtual server. To add IP addreses for additional networks, click Add.
Property(S): IPAddress_DlgTitle = Virtual Server Configuration
Property(S): License_Devices = devices
Property(S): License_Processors = processors
Property(S): LicenseModeDlg_DlgDesc = SQL server supports two client licensing modes: per seat licensing and processor licensing.
Property(S): LicenseModeDlg_DlgText = Choose the appropriate licensing modes.
Property(S): LicenseModeDlg_DlgText1 = Per seat license: each device that accesses Microsoft SQL Server requires a separate license.
Property(S): LicenseModeDlg_DlgText2 = Processor license: each processor on this server requires a separate license.
Property(S): LicenseModeDlg_DlgTitle = Licensing Mode
Property(S): LicenseModeDlg_Processor = &Processor license for
Property(S): LicenseModeDlg_RadioButtonGroup = Licensing mode
Property(S): LicenseModeDlg_Seat = Per &seat license for
Property(S): Maintenance_ChgLabel = Ch&ange Installed Components
Property(S): Maintenance_ChgLabelCl = &Maintain the Virtual Server
Property(S): Maintenance_ChgText = Maintain features of this instance.
Property(S): Maintenance_ChgTextCl = Add or remove nodes to the virtual server.
Property(S): Maintenance_DlgDesc = You can change or remove this instance of SQL Server.
Property(S): Maintenance_DlgTitle = Change or Remove Instance
Property(S): Maintenance_RmvLabel = R&emove Microsoft SQL Server
Property(S): Maintenance_RmvText = Remove all features of this existing installation from your computer.
Property(S): Maintenance_RmvTextCl = Remove the virtual server from your cluster.
Property(S): Maintenance_ChgLabelResume = Complete the &suspended installation
Property(S): Maintenance_ChgTextResume = Complete the suspended installation of Microsoft SQL Server on your computer.
Property(S): Progress_DlgDesc1 = The program features you selected are being installed.
Property(S): Progress_DlgDesc2 = The Microsoft SQL Server is being removed.
Property(S): Progress_DlgDesc3 = Setup is installing the components you selected.
Property(S): Progress_DlgDesc4 = The Microsoft SQL Server is being reinstalled.
Property(S): Progress_DlgText1 = Please wait while Setup installs Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgText2 = Please wait while Setup removes Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText3 = Please wait while Setup updates Microsoft SQL Server. This may take several minutes.
Property(S): Progress_DlgText4 = Please wait while Setup reinstalls Microsoft SQL Server. Installation may take several minutes.
Property(S): Progress_DlgTitle1 = Installing Microsoft SQL Server
Property(S): Progress_DlgTitle2 = Removing Microsoft SQL Server
Property(S): Progress_DlgTitle3 = Configuring Microsoft SQL Server
Property(S): Progress_DlgTitle4 = Reinstalling Microsoft SQL Server
Property(S): Progress_lbStatus = Status:
Property(S): Register_CompLabel = C&ompany:
Property(S): Register_DlgSpec = The following information will personalize your installation.
Property(S): Register_DlgText = The Name field must be filled in prior to proceeding. The Company field is optional.
Property(S): Register_DlgText1 = Please enter your 25 character Product Key. You can find this number on the yellow sticker in the CD liner notes or the CD sleeve.
Property(S): Register_DlgTitle = Registration Information
Property(S): Register_NameLabel = N&ame:
Property(S): Resume_ResumeText = Setup will complete the suspended installation of Microsoft SQL Server on your computer. To continue, click Next.
Property(S): Resume_TextLine1 = Microsoft SQL Server Installation Wizard
Property(S): ServiceAccountDlg_Advanced = &Customize for each service account
Property(S): ServiceAccountDlg_Autostart = Start services at the end of setup
Property(S): ServiceAccountDlg_AutostartServices = Start services at the end of setup
Property(S): ServiceAccountDlg_DlgDesc = Service accounts define which accounts to log in.
Property(S): ServiceAccountDlg_DlgTitle = Service Account
Property(S): ServiceAccountDlg_Domain = Use a domain use&r account
Property(S): ServiceAccountDlg_DomainLabel = &Domain:
Property(S): ServiceAccountDlg_BuiltIn = Use the built-in S&ystem account
Property(S): ServiceAccountDlg_PasswordLabel = &Password:
Property(S): ServiceAccountDlg_Service = S&ervice:
Property(S): ServiceAccountDlg_Service1 = Service:
Property(S): ServiceAccountDlg_UsernameLabel = &Username:
Property(S): Setup = Setup
Property(S): StartCopy_DlgDesc = Setup is ready to begin installation.
Property(S): StartCopy_DlgDescReinst = Setup is ready to begin reinstallation.
Property(S): StartCopy_DlgDescRemove = You have chosen to remove the program from your system.
Property(S): StartCopy_DlgDescRemoveCl = You have chosen to remove the program from your cluster.
Property(S): StartCopy_DlgDescVSConfig = Setup is ready to begin updating your virtual server.
Property(S): StartCopy_DlgText = Setup has enough information to start copying the program files. To proceed, click Install. To change any of your installation settings, click Back. To exit setup, click Cancel.
Property(S): StartCopy_DlgText2 = Click Cancel to exit setup.
Property(S): StartCopy_DlgTextConfig = Setup has enough information to start installation. Click Install to proceed.
Property(S): StartCopy_DlgTextReinstData = You have chosen to re-install all features of existing installation including data files, and therefore overwrite the system database. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextReinst = You have chosen to re-install all features of existing installation. Click Reinstall to proceed.
Property(S): StartCopy_DlgTextRemove = Click Remove to remove Microsoft SQL Server from your computer. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextRemoveCl = Click Remove to remove Microsoft SQL Server from your cluster. After removal, this program will no longer be available for use.
Property(S): StartCopy_DlgTextUnchanged = You did not change your virtual server configuration.
Property(S): StartCopy_DlgTitle = Ready to Install
Property(S): StartCopy_DlgTitleConfig = Ready to Update
Property(S): StartCopy_DlgTitleReinst = Ready to Reinstall
Property(S): StartCopy_DlgTitleRemove = Remove Microsoft SQL Server
Property(S): StaticUserName = Account:
Property(S): StaticUserPassword = &Password:
Property(S): TextDataDir = &Data files:
Property(S): TextProgramFileDir = Program files:
Property(S): UpgradeLogon_DlgDesc = Database account for upgrading.
Property(S): UpgradeLogon_DlgText = The authentication mode specifies the security used when connecting to SQL Server during database upgrading.
Property(S): UpgradeLogon_DlgTitle = Upgrade Logon Information
Property(S): UpgradeLogon_Password = &Password:
Property(S): UpgradeLogon_SQL = &SQL Server Authentication Mode
Property(S): UpgradeLogon_SQLText = Enter SQL Server account:
Property(S): UpgradeLogon_UserName = &Username:
Property(S): UpgradeLogon_Windows = &Windows Authentication Mode
Property(S): UserExit_FinishText1 = To complete installation at another time, please run setup again.
Property(S): UserExit_FinishText2 = Click Finish to exit setup.
Property(S): UserExit_RestContText1 = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): UserExit_RestContText2 = Click Restore or Continue Later to exit the installation wizard.
Property(S): UserExit_TextLine = Setup was interrupted before Microsoft SQL Server could be completely installed.
Property(S): VirtualServer_DlgDesc = The virtual server name must be unique on the network.
Property(S): VirtualServer_DlgText = Enter the name of the new virtual server.
Property(S): VirtualServer_DlgTitle = Virtual Server Name
Property(S): WARNING_QUORUMGROUP1 = You have chosen the group containing the quorum resource. It is strongly recommended that you should not use the quorum group with SQL Server.
Property(S): WARNING_QUORUMGROUP2 = Are you sure you want to proceed?
Property(S): DWTITLENAME = Microsoft SQL Server Setup
Property(S): DWHEADERTEXT = Microsoft SQL Server Setup was unable to install on your computer.
Property(S): DWERRORTEXT = Microsoft SQL Server Setup has encountered a problem and will end.
Property(S): ErrorDlg_Title = Microsoft SQL Server Setup
Property(S): Wait_Title = Please wait...
Property(S): Wait_Database = Validating settings.
Property(S): Wait_Service = Starting Service: [1]
Property(S): Wait_Connect = Validating database access on SQL Server [1].
Property(S): ErrorReporting_DlgDesc = Help Microsoft improve some of the SQL Server 2005 components and services.
Property(S): ErrorReporting_DlgText1 = For more information on the error reporting feature and the type of information sent, click Help.
Property(S): ErrorReporting_DlgText1_Property = ErrorReporting_DlgText1
Property(S): ErrorReporting_DlgText1_Express = By installing Microsoft SQL Server 2005, SQL Server and its components will be configured to automatically send fatal service error reports to Microsoft or a Corporate Error Reporting Server. Microsoft uses error reports to improve SQL Server functionality, and treats all information as confidential.
Property(S): ErrorReporting_DlgTitle = Error and Usage Report Settings
Property(S): ErrorReporting_CheckBox = &Automatically send Error reports for SQL Server 2005 to Microsoft or your corporate error reporting server. Error reports include information regarding the condition of SQL Server 2005 when an error occurred, your hardware configuration and other data. Error reports may unintentionally include personal information, which will not be used by Microsoft.
Property(S): ErrorReporting_SQM_CheckBox = Automatically send &Feature Usage data for SQL Server 2005 to Microsoft. Usage data includes anonymous information about your hardware configuration and how you use our software and services.
Property(S): EnableRanu_DlgDesc = Configure Run As Normal User mode.
Property(S): EnableRanu_DlgText1 = Allow users who do not have administrator privileges to run a separate instance of the Database Engine.
Property(S): EnableRanu_DlgText1_Property = EnableRanu_DlgText1
Property(S): EnableRanu_DlgTitle = User Instances
Property(S): EnableRanu_CheckBox = &Enable User Instances
Property(S): BrowseFolder_VolumeList = Program files must be installed on a valid local disk available on all cluster nodes. The volumes values are:
Property(S): ProductClash_DlgTitle = Existing components
Property(S): ProductClash_DlgDesc = Components have been found on the machine. Select upgrade options below.
Property(S): ProductClash_DlgText = The following components that you chose to install are already installed on the machine. To view a report of available options and alternatives click on Details.
Property(S): ProductClash_Detail = &Details...
Property(S): ProductClash_Warning = Components shared between SQL Server instances will be removed if they belong only to the SQL Server instance being upgraded.
Property(S): ProductClash_LegacyTools = Management Tools
Property(S): ProductClash_LegacyDTS = Data Transformation Services
Property(S): DetailDlg_DlgTitle = Installation options
Property(S): DetailDlg_DlgDesc = The list below shows installed components and upgrade options.
Property(S): InstanceListDlg_DlgTitle = Installed instances
Property(S): InstanceListDlg_DlgDesc = The list below contains all existing instances and components installed on this machine.
Property(S): InstanceListDlg_InstanceListText = To view details for an installed instance, select an instance from the list below. To proceed, select the instance name to upgrade and click OK.
Property(S): InstanceListDlg_TypeText = Type:
Property(S): InstanceListDlg_VersionText = Version:
Property(S): InstanceListDlg_EditionText = Edition:
Property(S): InstanceListDlg_LanguageText = Language:
Property(S): InstanceListDlg_DetailGroup = Installed Instance Details
Property(S): Instance_Instances = &Installed instances
Property(S): Product_YukonServer = Yukon Server
Property(S): Product_SQLServer = SQL Server
Property(S): Product_AnalysisServices = Analysis Services
Property(S): Product_ReportServer = Reporting Services
Property(S): ProductClash_Maintain = (Cannot maintain product, to maintain the product go to Add or Remove Programs)
Property(S): ProductClash_Upgrade = (Cannot upgrade product, to maintain the product go to Add or Remove Programs)
Property(S): ProductClash_UpgradeAsVS = (Upgrade product to Virtual Server)
Property(S): ProductClash_Virtualize = (Cannot virtualize product)
Property(S): Detail_Name = Name:
Property(S): Detail_AllowedAction = Allowed Action:
Property(S): Detail_Reason = Reason:
Property(S): Detail_Warning = Warning:
Property(S): Detail_ActionMaintain = Maintain (Action is only available from Add or Remove Programs)
Property(S): Detail_ReasonMaintain = Cannot maintain product, to maintain the product go to Add or Remove Programs
Property(S): Detail_ActionUpgrade = Upgrade
Property(S): Detail_ReasonUpgrade = Product can be upgraded to a new version
Property(S): Detail_ActionNone = None
Property(S): Detail_ReasonNoVirtualize = Product cannot be virtualized
Property(S): Detail_ReasonNone = Upgrades are not supported yet
Property(S): Detail_ReasonBlock = Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Property(S): Detail_ReasonRemoveDTS = The SQL Server instance you are upgrading includes Data Transformation Services. Following the upgrade, Data Transformation Services will be removed unless there are other SQL Server instances installed that share it. Click on help for more information.
Property(S): Detail_ReasonRemoveTools = The SQL Server instance you are upgrading includes SQL Server Management Tools. Following the upgrade, previous versions of SQL Server Management Tools will be removed unless there are other SQL Server instances installed that share them. Do not use previous versions of SQL Server Management Tools with SQL Server 2005. Instead, use SQL Server 2005 Management Tools included in the SQL Server 2005 Workstation Components feature.
Property(S): SampleDatabase_DlgDesc = Configure how the sample databases are installed.
Property(S): SampleDatabase_DlgText = Specify a method to install the sample databases to an existing instance of SQL Server. To attach the sample databases, you must have permissions to create databases on the specified instance.
Property(S): SampleDatabase_DlgTitle = Sample Databases Setup
Property(S): SampleDatabase_ServerText = &SQL Server instance:
Property(S): SampleDatabase_Install = &Install sample databases without attaching
Property(S): SampleDatabase_Attach = Install and &attach sample databases
Property(S): Report_ActionUpgrade = Upgrade
Property(S): Report_ActionVirtualize = Virtualize
Property(S): Report_InstallTitle = The following components will be installed:
Property(S): Report_BlockTitle = The following components that you selected will not be changed:
Property(S): Report_WarnSPTitle = Warning: Setup found that the following components that already exist are at a different service pack level than the components being installed.
Property(S): Report_WarnSPCompList = Components:
Property(S): Report_WarnSPTail = After completing setup, you must download and apply the latest SQL Server 2005 service pack to all the components.
Property(S): UpgradeTools = Upgrading tools [1]
Property(S): UpgradeRepl = Upgrading replication [1]
Property(S): UpgradeEngine = Upgrading SQL Engine [1]
Property(S): UpgradeDTS = Upgrading DTS [1]
Property(S): HideAdvancedOptionsText = Hi&de advanced configuration options
Property(S): ArpProductDispayName = Microsoft SQL Server 2005
Property(S): Built_inLocalSystem = Local system
Property(S): Built_inNetworkService = Network service
Property(S): Built_inLocalService = Local service
Property(S): Wait_UpgradeBlocker_Title = Analyzing Upgrade
Property(S): Wait_UpgradeBlocker_Status = Validating Upgrade Options.
Property(S): UpgradeBlockerDlg_DlgDesc = The following issues currently block upgrading to SQL Server 2005
Property(S): UpgradeBlockerDlg_DlgTitle = Upgrade Blocked
Property(S): UpgradeBlockerDlg_UAWarning = For assistance in resolving these issues, run Upgrade Advisor. You can install Upgrade Advisor from the SQL Server 2005 Setup Splash Screen.
Property(S): DomainGroup_DlgTitle = Domain Groups for Clustered Services
Property(S): DomainGroup_DlgText = The startup account for each clustered service will be added to the DomainNameGroupName to set its access control. Enter the name of existing DomainNameGroupName for each clustered service being installed. For additional information, click Help.
Property(S): DomainGroup_Browse = ...
Property(S): DomainGroupDlg_Service = Service Name
Property(S): DomainGroupDlg_Group = DomainNameGroupName
Property(S): SqlDomainGroup_SQL = &SQL Server
Property(S): SqlDomainGroup_AGT = S&QL Server Agent
Property(S): SqlDomainGroup_FTS = &Full-Text Search
Property(S): SqlDomainGroup_AS = &Analysis Services
Property(S): SqlDomainGroupService_SQL = SQL Server
Property(S): SqlDomainGroupService_AGT = SQL Server Agent
Property(S): SqlDomainGroupService_FTS = Full-Text Search
Property(S): SqlDomainGroupService_AS = Analysis Services
Property(S): SqlSortId030 = Binary order, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId031 = Dictionary order, case-sensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId032 = Dictionary order, case-insensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId033 = Dictionary order, case-insensitive, uppercase preference, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId034 = Dictionary order, case-insensitive, accent-insensitive, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId035 = Binary order based on code point comparison, for use with the 437 (U.S. English) Character Set.
Property(S): SqlSortId040 = Binary order, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId041 = Dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId042 = Dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId043 = Dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId044 = Dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId045 = Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId049 = Strict compatibility with version 1.x case-insensitive databases, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId051 = Dictionary order, case-sensitive, for use with 1252 Character Set.
Property(S): SqlSortId052 = Dictionary order, case-insensitive, for use with 1252 Character Set.
Property(S): SqlSortId053 = Dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId054 = Dictionary order, case-insensitive, accent-insensitive, for use with 1252 Character Set.
Property(S): SqlSortId055 = Alternate dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId056 = Alternate dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId057 = Alternate dictionary order, case-insensitive, accent-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId058 = Scandinavian dictionary order, case-insensitive, uppercase preference, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId059 = Scandinavian dictionary order, case-sensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId060 = Scandinavian dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId061 = Alternate dictionary order, case-insensitive, for use with the 850 (Multilingual) Character Set.
Property(S): SqlSortId081 = Dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId082 = Dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId083 = Czech dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId084 = Czech dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId085 = Hungarian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId086 = Hungarian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId087 = Polish dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId088 = Polish dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId089 = Romanian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId090 = Romanian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId091 = Croatian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId092 = Croatian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId093 = Slovak dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId094 = Slovak dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId095 = Slovenian dictionary order, case-sensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId096 = Slovenian dictionary order, case-insensitive, for use with the 1250 (Central European) Character Set.
Property(S): SqlSortId105 = Dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId106 = Dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId107 = Ukrainian dictionary order, case-sensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId108 = Ukrainian dictionary order, case-insensitive, for use with the 1251 (Cyrillic) Character Set.
Property(S): SqlSortId113 = Dictionary order, case-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId114 = Dictionary order, case-insensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId120 = Mixed dictionary order, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId121 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId122 = Dictionary order, case-sensitive, accent-sensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId124 = Dictionary order, case-insensitive, accent-insensitive, for use with the 1253 (Greek) Character Set.
Property(S): SqlSortId129 = Dictionary order, case-sensitive, for use with the 1254 (Turkish) Character Set.
Property(S): SqlSortId130 = Dictionary order, case-insensitive, for use with the 1254 (Turkish) Character Set.
Property(S): SqlSortId137 = Dictionary order, case-sensitive, for use with the 1255 (Hebrew) Character Set.
Property(S): SqlSortId138 = Dictionary order, case-insensitive, for use with the 1255 (Hebrew) Character Set.
Property(S): SqlSortId145 = Dictionary order, case-sensitive, for use with the 1256 (Arabic) Character Set.
Property(S): SqlSortId146 = Dictionary order, case-insensitive, for use with the 1256 (Arabic) Character Set.
Property(S): SqlSortId153 = Dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId154 = Dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId155 = Estonian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId156 = Estonian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId157 = Latvian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId158 = Latvian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId159 = Lithuanian dictionary order, case-sensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId160 = Lithuanian dictionary order, case-insensitive, for use with the 1257 (Baltic) Character Set.
Property(S): SqlSortId183 = Danish/Norwegian dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId184 = Swedish/Finnish (Phone) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId185 = Swedish/Finnish (Standard) dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): SqlSortId186 = Icelandic dictionary order, case-insensitive, uppercase preference, for use with 1252 Character Set.
Property(S): StdSku = 1
Property(S): UpgradeCode = {929C9FEC-8873-4A1A-A209-9AF432E8E1D1}
Property(S): SqlPackageId = 1
Property(S): ProductName = Microsoft SQL Server 2005
Property(S): ProductNameSetup = Microsoft SQL Server 2005 Setup
Property(S): RemoveFeatureList = SQL_Engine,SQL_Data_Files,SQL_Replication,SQL_FullText,SQL_SharedTools,SQL_BC_DEP
Property(S): ROOTDRIVE = D:
Property(S): ValidMOFInstanceName = 1
Property(S): PIDRET = 0
Property(S): DPID = **********
Property(S): PID = **********
Property(S): PIDSEQ = 271000003
Property(S): PKU = 0
Property(S): CCPTrigger = 2
Property(S): SqlPerfMonRegKey = SQLCTR
Property(S): SqlSubDir = MSSQL
Property(S): InstanceSubDir = MSSQL.1
Property(S): Namechecksum.7354AFCB_913B_4E9F_B76C_2376101FDE0C = Standard Edition
Property(S): Namechecksum.CC1A8C58_27D1_4D38_BF1B_C0A5CBB90616 = Standard Edition
Property(S): QuotedServiceGroupAgent.EAD22282_F1AF_4119_B1F9_C9F1DCBC62FF = IECDC-WIAS169SQLServer2005SQLAgentUser$IECDC-WIAS169$MSSQLSERVER
Property(S): QuotedServiceGroupADHelper.2C8E638F_C982_4AA5_A173_7148A8E8649D = IECDC-WIAS169SQLServer2005MSSQLServerADHelperUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.879C8BDB_884A_4C3C_80C3_3452EA2B8439 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.03BE59F9_3DFA_413B_A99C_B95CA31A7BFE = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): QuotedServiceGroupSQLBrowser.2FC2D269_8625_4826_BB3F_F9059090CB38 = IECDC-WIAS169SQLServer2005SQLBrowserUser$IECDC-WIAS169
Property(S): InstId = MSSQL.1
Property(S): PreviousInstId = MSSQL.1
Property(S): SqlLegacyRegPath = MSSQLServer
Property(S): SqlOriginalMachineName = IECDC-WIAS169
Property(S): RSSqlPoolLimit = 150
Property(S): RSGUIDVALUE = {97ba1f98-43fe-42dd-8a0d-ff40868ebe16}
Property(S): ProgramFilesFolder.D20239D7_E87C_40C9_9837_E70B8D4882C2 = C:Program Files
Property(S): ModuleID_SQLBASE = D20239D7_E87C_40C9_9837_E70B8D4882C2
Property(S): SQLAUTOSTART = 1
Property(S): InstanceName.D20239D7_E87C_40C9_9837_E70B8D4882C2 = MSSQLSERVER
Property(S): RSPREREQUISITECHECKED = 1
Property(S): SqlCOMPlusInstalled = 1
Property(S): SqlASPNETInstalled = 1
Property(S): ProgramMenuFolder.ConfigurationTools1033 = C:Documents and SettingsAll UsersStart MenuPrograms
Property(S): SqlDefaultWebSite = /W3SVC/1
Property(S): SqlIISInstalled = 1
Property(S): IISCHECKED = 1
Property(S): SCMLocalServiceAccount = NT AUTHORITYLocalService
Property(S): SCMNetworkServiceAccount = NT AUTHORITYNetworkService
Property(S): PerformanceLogUsersGroup = BUILTINPerformance Log Users
Property(S): PerformanceMontiorUsersGroup = BUILTINPerformance Monitor Users
Property(S): DW20PATH_CPUTYPEX86 = X86
Property(S): QuotedComputerName = IECDC-WIAS169
Property(S): QuotedDefaultDomain = VF-IE
Property(S): DW20PATH_X86.8D56D6B0_25DE_4471_A64F_717FC5AB6330 = C:PROGRA~1COMMON~1MICROS~1DWDW20.EXE
Property(S): DefaultDomain = VF-IE
Property(S): WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWS
Property(S): SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E = C:WINDOWSsystem32
Property(S): ACTION = INSTALL
Property(S): Preselected = 1
Property(S): UILevel = 2
Property(S): ServicePrefixRS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005ReportServerUser$IECDC-WIAS169$
Property(S): ServicePrefixSSIS.6080319C_1466_426E_9E7A_1DD555143E0A = SQLServer2005DTSUser$IECDC-WIAS169
Property(S): OriginalDatabase = D:MSMSQLServer2005ServersSetupSqlRun_SQL.msi
Property(S): DATABASE = C:WINDOWSInstallerd5f48.msi
Property(S): Privileged = 1
Property(S): RedirectedDllSupport = 2
Property(S): MsiWin32AssemblySupport = 5.2.3790.1830
Property(S): MsiNetAssemblySupport = 2.0.50727.42
Property(S): Date = 22/02/2007
Property(S): Time = 15:34:23
Property(S): TTCSupport = 1
Property(S): ColorBits = 32
Property(S): TextHeight = 16
Property(S): BorderSide = 1
Property(S): BorderTop = 1
Property(S): CaptionHeight = 19
Property(S): ScreenY = 768
Property(S): ScreenX = 1024
Property(S): SystemLanguageID = 6153
Property(S): ComputerName = IECDC-WIAS169
Property(S): UserLanguageID = 6153
Property(S): UserSID = S-1-5-21-1275210071-484763869-725345543-115600
Property(S): LogonUser = manncol_srvadm
Property(S): AdminUser = 1
Property(S): VirtualMemory = 7379
Property(S): PhysicalMemory = 3928
Property(S): SystemFolder.60A85CA1_D9D8_43FA_9DD5_574BEF970F9F = C:WINDOWSsystem32
Property(S): Intel = 15
Property(S): ShellAdvtSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): GPTSupport = 1
Property(S): FontsFolder = C:WINDOWSFonts
Property(S): ModuleID_SQLBRWS = 2FC2D269_8625_4826_B
Situation: In this stored procedure, I have to calculate in some manner: Font, FontSize, BoldText, ShowBox and number of characters to see how many lines it will take on a Crystal Report. Wondering if you have seen some like this on Web or have an ideas? Measurements(length, width) and character count seem appropriate. How about a function?
Uses Arial and fontsize can be 8pt - 28pt.
Thanks. TAEG