Notify Operator Task Question
Nov 19, 2007
Hi,
can the Notify Operator Task send the output error message of its predecessor task(e.g Execute T-SQL Statement Task) to the operator? If yes, how?
Thanks,
Greg
ADVERTISEMENT
Notify Operator
Dec 2, 2006Hello,
I have a problem with the notification. I have enabled Database mail and i have created an Operator.
Under SQL Server AgentJobs and then in the job properties i have enabled notification but i don`t receive a mail. Test e-mail works fine but "real" e-mail not.
I have also tried with the Database Maintenance Wizard but even then it just not work.
I have noticed that others have experienced the same problem but i have seen no solution yet.
Could you please help me? What can cause this problem? What`s the best i can do to start searching for the solution? Thanks!
SQL Server 2008 :: Notify Operator Only Works Some Of The Time?
May 25, 2010I've been working with Database Mail for some time but I haven't seen this one before. I have a maintenance plan that does the following:
1. Check database integrity
On Success:
2. Perform backups
On Success:
3. Perform a maintenance cleanup
On Success:
4. Notify operator of success
Steps 1 - 3 are also linked (via On Failure arrows) to a singular Notify Operator of Failure task.
The maintenance plan does exactly what I want it to, and if everything goes correctly, it successfully sends an email to an operator.
If steps 1 - 3 fail, the job ends in an error state, but does not trigger the Notify Operator of Failure task.
I was able to recreate the problem by creating another maintenance plan on the same instance with the same steps. Its "Notify Operator" on failure task also doesn't work.
It occurs to me that maybe I'm missing something, so here's some of the details of my SQL server:
SQL 2008 + SP1 (10.0.2531) x64 on Windows 2008 R2
DB Mail profile is public and default
I do have a slightly unusual profile, in that it uses two accounts:
1. A connection to a SharePoint SMTP service (where it catches emails directed at document libraries)
2. A connection to a UNIX-based smtp server (which routes mail to regular mailboxes and my SQL DBA mailing list)
The Profile will attempt to send to the SharePoint server first. The SharePoint server does not relay. If the document library email address doesn't exist, SQL will raise a warning (in the Database Mail log) and the profile will use the second account on the list, which is a real mail server and can relay the message to any mailbox.
It works really well, actually. When the maintenance plan completes successfully, the message is sent to the drop folder on the SharePoint server, and SharePoint routes the email to the correct library, and we have a central archive of all DB Mail notifications.
But if the job fails (for example, if the backup disk is out of space), none of this happens. According to the log, the job doesn't even try to send a notification. Looking at the DBMail log, the Mail service does not start. No email is delivered to the drop folder of the receiving SMTP server. So I don't think my Database Mail configuration is the problem here. It is apparently something to do with the way the job itself handles errors.
DB Mail And Notify Operator Through DB Mail Error Could Not Retrieve Item From The Queue
Feb 2, 2007I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM
Log Database Mail (Database Mail Log)
Log ID 402
Process ID 3936
Last Modified 2/2/2007 8:35:00 AM
Last Modified By NT AUTHORITYSYSTEM
Message
1) Exception Information
===================
Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException
Message: Could not retrieve item from the queue.
Data: System.Collections.ListDictionaryInternal
TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession)
HelpLink: NULL
Source: DatabaseMailEngine
StackTrace Information
===================
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession)
at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db)
at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
What step am I missing?
Notify By Email Two Different People For The Same Job
Jun 6, 2001Currently, I have set up a SQL 7.0 database backup job and have one person notified if the job succeeds, but HOW do I choose an option to notify a different person if the job fails ?
Thank you in advance
HELP! Jobs Fail To Notify
Sep 25, 2001I can not get SQLServerAgent to Send Mail. Help!
SQLMail started successfully.
In the server agent properties I use the Test button and I receive the
response.
"Successfully started(and stopped) a mail session with this profile."
Indicating that mail should work.
If I send a email notification from a scheduled job it gives me the error:
NOTE: Failed to notify 'operations' via email
In the SQL Server Agent Error log I get.
"[264] An attempt was made to send an email when no email session has been
established"
xp_sendmail works fine.
Any ideas would be greatly appreciated.
TIA...
How To Notify A DBA When An Object Is Created ?*V *?
Aug 14, 2000Hi Guys,
Is there a way to notify DBA when a new stored procedure,table,view is created by any user...
Help is greatly appericated..
Jessi..
Using Trigger To Notify An Assembly Of Changes.
Oct 13, 2006I have a requirement to create a sorted list of objects, stored withinan assembly, and I would like to use a After Insert/Update trigger tonotify that assembly that something has changed, rather than pollingthe database for changes all the time.My initial problem is that I need to create a static list so that itcan be dynamically looked at by other assemblies, but SQL Server won'tallow me to attach a dll which contains a static method.Has anyone done something like this? Are there any decent examplesavailable anywhere?any help will be appreciated.simo
View 4 Replies View RelatedNotify Whether A Trigger Is Triggered...?
Aug 27, 2007Hi,
I am developing desktop application with SQL Server 2005 in C#. I need your help. My Question is "How to notify a Database trigger is executed thru C# application?".
Now I am going to explain clearly. I have a table "Employee" and I created one trigger (it may be INSERT/UPDATE/DELETE) for that table. Then I created a C# application to show a msg box when that table is modified. Now my question is If that table is modified a message box will be shown. I know about trigger (If trigger assigned table is modified that trigger will automatically executed.) But how do i know that trigger is executed thru a C# application. Please send your suggestion or links.
Thanx,
GANESAN MURUGESAN.
SQL Trigger To Notify VB.NET Application ?
Aug 10, 2007Hi all,
I have a VB.NET 2005 application that needs to monitor constantly each change of a field on a SQL server 2005.
Is there a way of setting a trigger up in the SQL Server that notifies the VB.NET application to avoid having the VB.NET apllication querying the SQL table all day for changes?
The table in SQL stores a temperature value. I need the VB.NET application to receive this value everytime there's a change. I could do a timer on the VB.NET application to check for changes in the table every 1 second but I don't think this is efficient. The temperature value may change once every two or three seconds.
The VB.NET application will process the temperature value.
Is there a way of notifying the VB.NET application (which runs from a different server) from within SQL Server? If so, how? If not, what would you go about implementing this?
Thanks again for your comments,
ST
Unzip Or Notify Failure
Oct 18, 2007I have two question
1.In SSIS is there a way to unzip the text files
I have set an automated process in sql server agent
I receive ziped text files.I want to unzip the files before loading the data
2.Is there a way to notify when an error occurs in the package in sql server agent.
Please let me know
Notify When Update / Insert
Mar 23, 2008hi,
there is any way to a bd notify the user by creat a file or send a e-mail or even connect to a ip and send a message when any record is changed ( update/insert/delete)
i have seen a event called triger but i don´t know if is that what i want and i think this event can´t do what i need.
any one can help me?
thanks a lot
How To Setup Sqlserver To Notify You Through E-mail?
May 25, 2001I'm running sqlserver 2000 EE on windows nt 4.0 server. We are using
Microsoft outlook express. I would like to setup our sqlserver to
notify me via e-mail when a job finishes.
1) What value should I have for mail profile. Under
sql server age properties.
Please let me know.
Thanks,
Ranjan
NOTE: Failed To Notify '' Via Email
Jan 5, 2004I have job in SQL Server 2000 that is setup to notify an email operator upon successful completion.
When I test the notification to the set email operator it sends the email just fine.
When the job is run manually it emails the operator just fine.
When the job is run on a schedule it does not email the operator upon completion. It gives the details in view job history "NOTE: Failed to notify '<operator>' via email.
I have other jobs on the same server that run and notify via email to other operators upon successful completion just fine.
I have parsed MS Technet and the web and did not find anything.
Any help is greatly appreciated.
SQL 2012 :: How To Notify External Application
Sep 17, 2014When my SQL Agent job completes successfully, I'd like to send a notification to QlikView. The idea is to stop QlikView having to constantly check if the job has been run, and just get notified when it needs to update its data.
I don't know how to start. Can the job notifications push a success message to QlikView? I don't think I want to send an email, but something that indicates to QlikView to update the tables.
Notify Table Updates Across Servers
Nov 6, 2007
Simple question:
I have two servers S1 and S2. Inmediately after new data on S1 is available I want to perform some actions on S2.
I can use a trigger on S1, but if S2 is down the transaction on S1 will be lost. I could use database replication but I only need one single table in S1 to report changes to S2
Is there any other approach I could use?
Thanks.
Using Database Mail To Notify Job Failures Help?
Sep 18, 2007How do I get the option my database mail profile to appear in the drop down list on the "Notifications Page" in my job properties?
I have configured the mail profile and sucessfully sent a test E-mail.
I have also set "Enable mail profile" in the SQL Agent Properties and restarted the agent.
What else do I need to do, help please?
Database Email Fails To Notify
Oct 8, 2007I am havig trouble getting database mail to work. I setup IIS on the same box as sql. I setup SMTP with the relay to 127.0.0.0. In sql server, I setup database mail to point to localhost, with no authentication. After the setup, when I test the email (RMB Send test message) it works fine.
I created a job that will fail every time. I setup myself as the notify party on the job. When I run the job, it fails. I get no email. The job log has the following error:
Message
The job failed. The Job was invoked by User xxxxAdministrator. The last step to run was step 1 (test 1). NOTE: Failed to notify 'Dan Jones' via email.
I have spent lots of hours trying to make this simple thing work. What is wrong?
Notify W/ SQLAgent Alerts That Disk Is Near Full
Jun 25, 2002Does anyone know how to send a notification, using SQL Agent Alert,
if disk space gets to a certain level on the various server
hard drives?
thanks!
SQL Server 2008 :: Notify Only If There Are Certain Blocks By Certain User
Jun 12, 2015I'm trying to set the query to send email ONLY when it returns records of blocks and i cant seem to get this going.
declare @blocks varchar(max)
set @blocks = (SELECT spid,
sp.[status],
loginame [Login],
hostname,
blocked BlkBy,
sd.name DBName,
[Code] ....
Transact SQL :: Notify Only If Blocking Is Happening For More Than A Minute Or 30 Seconds
Aug 14, 2015I have configured an alert like below to track all blocked events in SQL Server across all databases and then kick start a sql job when a blocking happens which inserts data to a table, when there is a blocking in SQL server , i get an email  --which is working fine and i am able to track all queries.
but, HOW to get notifications ONLY if BLOCKING IS HAPPENING FOR MORE THAN 30 SECONDS OR 1 MINUTE with out using sp_configure?
---ALERT
USE [msdb]
GO
EXEC msdb.dbo.sp_update_alert @name=N'Blocking Process',Â
@message_id=0,Â
@severity=0,Â
@enabled=1,Â
[Code] .....
Invalid Operator For Data Type. Operator Equals Boolean AND, Type Equals Nvarchar
Jun 2, 2004I get this error when I attempt to read from a datareader using the following sql statement:
Dim mysql As String = "SELECT PayrollTrans.PayrollID, Employees.[EmpFirstName] & ' ' & " _
& " Employees.[emplastname] AS FullName, Employees.[City] & ', ' & Employees.[State] & ' ' & Employees.[zip] AS CityState " _
& " , PayrollTrans.Date, PayrollTrans.EmployeeID, PayrollTrans.RegHours, " _
& " PayrollTrans.OTHours , PayrollTrans.RegPay, PayrollTrans.OTPay, " _
& " PayrollTrans.FedTax, PayrollTrans.FICATax, PayrollTrans.MedicareTax, " _
& " PayrollTrans.ESCTax, PayrollTrans.StateTax, PayrollTrans.ESCEMPTax, " _
& " PayrollTrans.FUTATax, PayrollTrans.NetPay, Employees.EmployeeID, " _
& " Employees.Address1, Employees.Address2, Employees.SSAN, " _
& " Employees.PayType, Employees.RegPayRate, Employees.OTPayRate, " _
& " Employees.MaritalStatus, Employees.FedExemption, Employees.StateExemption, " _
& " Employees.Active, Employees.SelectforPay, Employees.PayDate " _
& " FROM PayrollTrans, Employees where PayrollTrans.EmployeeID = Employees.EmployeeID;"
my reader command list as follows:
Dim objCM As New SqlClient.SqlCommand(mysql, SqlConnection1)
Dim objDR As SqlClient.SqlDataReader
objDR = objCM.ExecuteReader
Any ideas on where I am going wrong?
Thanks in advance
Invalid Operator For Data Type. Operator Equals Boolean AND, Type Equals Datetime.
May 18, 2004I am getting a error message saying: Invalid operator for data type. Operator equals boolean AND, type equals datetime.
I traced the pointer to @gdo and @gd, they are both dates!
INSERT INTO AdminAlerts values (CURRENT_USER, 'UPDATE', getDate(), @biui, 'Updated booking, ID of booking updated: ' & @biui & ', Booking date and time before/after update: ' & @gdo & '/' & @gd & ', Room number before/after update: ' & @rno & '/' & @rn & ' and Customer ID before/after update: ' & @cio & '/' & @ci)
If I cut that two dates out it works fine.
Could someone tell me the syntax to include a date in a string :confused:
Send Mail Task Problem Using A Combination Of ForEach Loop, Recordset Destination, Execute SQL Task And Script Task
Jun 21, 2007OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
SQL LIKE Operator And %
Jan 14, 2008Just a quick question that I really couldn't find using google or anything because it was too bland.
How do you return the whole database while still using the LIKE operator.
I have a textbox that you can use to search the database but I want all the data to be displayed underneath the box so you can "browse" the data if you don't know the name of what you are looking for.
What would I put as the default value? I used just defaultvalue="%" and that worked in 1 area, but not another. Is this the right way?
Thanks,
Chris
SQL AND/OR Operator
Apr 30, 2008I have a query and for the life of me I cant figure it out.
I have a web form with a number of textboxes on it e.g. Title, subtitle, isbn. I also have a search button. This search page allows a user to enter any combination of fields in the form and then when they click the search button, a datagrid is diaplyed showing the results (gets the results from a SQL DB).
I have got the code working if the user selects say one item, but I dont know how to allow it so that the user can enter any combination of items in the form and the search button will search for it based on what the user says. I think im gettng confused with my logical operators in the sql statement.
If any one can take a look I would be greatful.public void BindData(){String @BookID = TxtBookID.Text;String @Title = TxtTitle.Text;String @Subtitle = TxtSubtitle.Text;String @ISBN = TxtISBN.Text;String @AuthorFName = TxtForename.Text;String @AuthorLName = TxtSurname.Text;
SqlDataAdapter ad = new SqlDataAdapter("SELECT Book_ID_Internal, Title, Subtitle, ISBN, Edition, Publication_Date, Author.First_Name, Author.Last_Name FROM Book, Author WHERE Book.Author_ID = Author.Author_ID AND Book.Book_ID_Internal = '" + @BookID + "' AND Book.Title = '" + @Title + "' AND Book.Subtitle = '" + @Subtitle + "' AND Book.ISBN = '" + @ISBN + "' AND Author.First_Name = '" + @AuthorFName + "' AND Author.Last_Name = '" + @AuthorLName + "'", conn);DataSet ds = new DataSet();ad.Fill(ds, "Book");GridView1.DataSource = ds;GridView1.DataBind();}
protected void BtnSearch_Click(object sender, ImageClickEventArgs e){BindData();}
LIKE Operator ..???
Jun 1, 2004Hi :)
I have a select statement that consists on something like this :
SELECT * FROM Products WHERE Ref LIKE '%" & Search & "%'
well this works ....but the problem is that i have some Ref in this format "MC-909" and if the user makes a search with the word "MC909" ...it dosent return any value ...
How can i solve this ??
Thanks in advance
IN Operator
Nov 19, 2001Anyone know why this simple query won't work??
this does work:
declare @stat char(10)
set @stat = 'A'
select * from table where status in (@stat)
this does not work:
declare @stat char(10)
set @stat = "'A','B'"
select * from table where status in (@stat)
i've tried 'A,B'
Using Like % Operator
Apr 23, 2007hello,
I got a condition in the query , as shown below:
where nt.Project_type='A' and nt.status='Done' and nt.project_id like '06%'
I also need to add an additional condition : like '07%'. How can I do this, i. e I need the projects where the type = A , status = Done and project_id starting with 06 and 07.
Thanks for any help
LIKE AND OR OPERATOR
Jun 16, 2007Hi ,
This is my first message on this forum. Well, I want to write a query which finds the length of the employee names whose name starts with J, A or S?.
This is what I did:
SELECT LENGTH(ENAME) FROM EMP
WHERE ENAME LIKE 'A%' OR LIKE 'J%' OR LIKE 'S%'
This query does not work. Can anyone tell me what is wrong with it?
Thanks,
Like Operator
Feb 2, 2008Using Like operator
I want to display Names ending with XYZ. But, the starting letter should be either A, B OR C.
Example:
AXYZ
BXYZ
CXYZ
Tell me how to do that
Thanks in Advance
Like Operator
Feb 14, 2008I have a column named tags which contains tagnames seperated by commas now i have to compare this column with a parameter named tagname which contains a single tagname how to do this.Please help me
here is my procedure
ALTER PROCEDURE [dbo].[ProcSoftwaresGetSoftwaresbyTags]
(
@FileTag Varchar(64)
)
AS
BEGIN
SELECT Category.CategoryName, Softwares.SoftwareFileID, Softwares.CategoryID, Softwares.FileName, Softwares.FileImage,Softwares.FilePath, Softwares.FilePublisher,
Softwares.Adminrating, Softwares.FileDownloadCount,substring(Softwares.FileDescription,1,200)as FileDescription,convert(Varchar(12),Softwares.FilePostedDate,109)as FilePostedDate,Softwares.FileSize, SystemRequirements.OperatingSystem
FROM Category INNER JOIN
Softwares ON Category.CategoryID = Softwares.CategoryID INNER JOIN
SystemRequirements ON Softwares.SoftwareFileID = SystemRequirements.SoftwareRequirementID where substring(Softwares.FileTag,0,3) LIKE substring(@FileTag,0,3) and FileStatus=1
END
EXCEPT Operator
Jun 6, 2006Hello everyone,
I have two tables athat are structurally identical. I wish to obtain rows that are in the first table that are not in the second one (e.g. the EXCEPT operator). EXCEPT is not supported directly in TSQL...
Does anyone know how to do this??!?!?
Thank you for your time
Chris