I have a problem with the notification. I have enabled Database mail and i have created an Operator.
Under SQL Server AgentJobs and then in the job properties i have enabled notification but i don`t receive a mail. Test e-mail works fine but "real" e-mail not.
I have also tried with the Database Maintenance Wizard but even then it just not work.
I have noticed that others have experienced the same problem but i have seen no solution yet.
Could you please help me? What can cause this problem? What`s the best i can do to start searching for the solution? Thanks!
I've been working with Database Mail for some time but I haven't seen this one before. I have a maintenance plan that does the following:
1. Check database integrity On Success: 2. Perform backups On Success: 3. Perform a maintenance cleanup On Success: 4. Notify operator of success
Steps 1 - 3 are also linked (via On Failure arrows) to a singular Notify Operator of Failure task.
The maintenance plan does exactly what I want it to, and if everything goes correctly, it successfully sends an email to an operator.
If steps 1 - 3 fail, the job ends in an error state, but does not trigger the Notify Operator of Failure task.
I was able to recreate the problem by creating another maintenance plan on the same instance with the same steps. Its "Notify Operator" on failure task also doesn't work.
It occurs to me that maybe I'm missing something, so here's some of the details of my SQL server:
SQL 2008 + SP1 (10.0.2531) x64 on Windows 2008 R2 DB Mail profile is public and default
I do have a slightly unusual profile, in that it uses two accounts:
1. A connection to a SharePoint SMTP service (where it catches emails directed at document libraries)
2. A connection to a UNIX-based smtp server (which routes mail to regular mailboxes and my SQL DBA mailing list)
The Profile will attempt to send to the SharePoint server first. The SharePoint server does not relay. If the document library email address doesn't exist, SQL will raise a warning (in the Database Mail log) and the profile will use the second account on the list, which is a real mail server and can relay the message to any mailbox.
It works really well, actually. When the maintenance plan completes successfully, the message is sent to the drop folder on the SharePoint server, and SharePoint routes the email to the correct library, and we have a central archive of all DB Mail notifications.
But if the job fails (for example, if the backup disk is out of space), none of this happens. According to the log, the job doesn't even try to send a notification. Looking at the DBMail log, the Mail service does not start. No email is delivered to the drop folder of the receiving SMTP server. So I don't think my Database Mail configuration is the problem here. It is apparently something to do with the way the job itself handles errors.
I've set up DB mail and sent a test e-mail and that comes through fine.
I set up an Operator with email Name: DWhelpton@k-and-s.com;MWeaver@k-and-s.com
I created a job and set up the notifications to e-mail the operator on failure.
When the job runs and fails, I do not get an e-mail and I get the following exception in the db mail log:
Date 2/2/2007 8:35:00 AM Log Database Mail (Database Mail Log)
Log ID 402 Process ID 3936 Last Modified 2/2/2007 8:35:00 AM Last Modified By NT AUTHORITYSYSTEM
Message 1) Exception Information =================== Exception Type: Microsoft.SqlServer.Management.SqlIMail.Server.Common.BaseException Message: Could not retrieve item from the queue. Data: System.Collections.ListDictionaryInternal TargetSite: Microsoft.SqlServer.Management.SqlIMail.Server.Controller.ICommand CreateSendMailCommand(Microsoft.SqlServer.Management.SqlIMail.Server.DataAccess.DBSession) HelpLink: NULL Source: DatabaseMailEngine
StackTrace Information =================== at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateSendMailCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandFactory.CreateCommand(DBSession dbSession) at Microsoft.SqlServer.Management.SqlIMail.Server.Controller.CommandRunner.Run(DBSession db) at Microsoft.SqlServer.Management.SqlIMail.IMailProcess.ThreadCallBack.MailOperation(Object o)
Currently, I have set up a SQL 7.0 database backup job and have one person notified if the job succeeds, but HOW do I choose an option to notify a different person if the job fails ?
In the server agent properties I use the Test button and I receive the response. "Successfully started(and stopped) a mail session with this profile." Indicating that mail should work.
If I send a email notification from a scheduled job it gives me the error: NOTE: Failed to notify 'operations' via email
In the SQL Server Agent Error log I get. "[264] An attempt was made to send an email when no email session has been established"
I have a requirement to create a sorted list of objects, stored withinan assembly, and I would like to use a After Insert/Update trigger tonotify that assembly that something has changed, rather than pollingthe database for changes all the time.My initial problem is that I need to create a static list so that itcan be dynamically looked at by other assemblies, but SQL Server won'tallow me to attach a dll which contains a static method.Has anyone done something like this? Are there any decent examplesavailable anywhere?any help will be appreciated.simo
Hi, I am developing desktop application with SQL Server 2005 in C#. I need your help. My Question is "How to notify a Database trigger is executed thru C# application?". Now I am going to explain clearly. I have a table "Employee" and I created one trigger (it may be INSERT/UPDATE/DELETE) for that table. Then I created a C# application to show a msg box when that table is modified. Now my question is If that table is modified a message box will be shown. I know about trigger (If trigger assigned table is modified that trigger will automatically executed.) But how do i know that trigger is executed thru a C# application. Please send your suggestion or links.
I have a VB.NET 2005 application that needs to monitor constantly each change of a field on a SQL server 2005. Is there a way of setting a trigger up in the SQL Server that notifies the VB.NET application to avoid having the VB.NET apllication querying the SQL table all day for changes?
The table in SQL stores a temperature value. I need the VB.NET application to receive this value everytime there's a change. I could do a timer on the VB.NET application to check for changes in the table every 1 second but I don't think this is efficient. The temperature value may change once every two or three seconds.
The VB.NET application will process the temperature value.
Is there a way of notifying the VB.NET application (which runs from a different server) from within SQL Server? If so, how? If not, what would you go about implementing this?
1.In SSIS is there a way to unzip the text files I have set an automated process in sql server agent I receive ziped text files.I want to unzip the files before loading the data
2.Is there a way to notify when an error occurs in the package in sql server agent.
hi, there is any way to a bd notify the user by creat a file or send a e-mail or even connect to a ip and send a message when any record is changed ( update/insert/delete) i have seen a event called triger but i don´t know if is that what i want and i think this event can´t do what i need. any one can help me? thanks a lot
I'm running sqlserver 2000 EE on windows nt 4.0 server. We are using Microsoft outlook express. I would like to setup our sqlserver to notify me via e-mail when a job finishes.
1) What value should I have for mail profile. Under sql server age properties.
I have job in SQL Server 2000 that is setup to notify an email operator upon successful completion.
When I test the notification to the set email operator it sends the email just fine.
When the job is run manually it emails the operator just fine.
When the job is run on a schedule it does not email the operator upon completion. It gives the details in view job history "NOTE: Failed to notify '<operator>' via email.
I have other jobs on the same server that run and notify via email to other operators upon successful completion just fine.
I have parsed MS Technet and the web and did not find anything.
When my SQL Agent job completes successfully, I'd like to send a notification to QlikView. The idea is to stop QlikView having to constantly check if the job has been run, and just get notified when it needs to update its data.
I don't know how to start. Can the job notifications push a success message to QlikView? I don't think I want to send an email, but something that indicates to QlikView to update the tables.
I have two servers S1 and S2. Inmediately after new data on S1 is available I want to perform some actions on S2.
I can use a trigger on S1, but if S2 is down the transaction on S1 will be lost. I could use database replication but I only need one single table in S1 to report changes to S2
I am havig trouble getting database mail to work. I setup IIS on the same box as sql. I setup SMTP with the relay to 127.0.0.0. In sql server, I setup database mail to point to localhost, with no authentication. After the setup, when I test the email (RMB Send test message) it works fine.
I created a job that will fail every time. I setup myself as the notify party on the job. When I run the job, it fails. I get no email. The job log has the following error:
Message The job failed. The Job was invoked by User xxxxAdministrator. The last step to run was step 1 (test 1). NOTE: Failed to notify 'Dan Jones' via email.
I have spent lots of hours trying to make this simple thing work. What is wrong?
I have configured an alert like below to track all blocked events in SQL Server across all databases and then kick start a sql job when a blocking happens which inserts data to a table, when there is a blocking in SQL server , i get an email  --which is working fine and i am able to track all queries.
but, HOW to get notifications ONLY if BLOCKING IS HAPPENING FOR MORE THAN 30 SECONDS OR 1 MINUTE with out using sp_configure?
---ALERT USE [msdb] GO EXEC msdb.dbo.sp_update_alert @name=N'Blocking Process', @message_id=0, @severity=0, @enabled=1,Â
Just a quick question that I really couldn't find using google or anything because it was too bland. How do you return the whole database while still using the LIKE operator. I have a textbox that you can use to search the database but I want all the data to be displayed underneath the box so you can "browse" the data if you don't know the name of what you are looking for. What would I put as the default value? I used just defaultvalue="%" and that worked in 1 area, but not another. Is this the right way? Thanks, Chris
I have a query and for the life of me I cant figure it out. I have a web form with a number of textboxes on it e.g. Title, subtitle, isbn. I also have a search button. This search page allows a user to enter any combination of fields in the form and then when they click the search button, a datagrid is diaplyed showing the results (gets the results from a SQL DB). I have got the code working if the user selects say one item, but I dont know how to allow it so that the user can enter any combination of items in the form and the search button will search for it based on what the user says. I think im gettng confused with my logical operators in the sql statement. If any one can take a look I would be greatful.public void BindData(){String @BookID = TxtBookID.Text;String @Title = TxtTitle.Text;String @Subtitle = TxtSubtitle.Text;String @ISBN = TxtISBN.Text;String @AuthorFName = TxtForename.Text;String @AuthorLName = TxtSurname.Text; SqlDataAdapter ad = new SqlDataAdapter("SELECT Book_ID_Internal, Title, Subtitle, ISBN, Edition, Publication_Date, Author.First_Name, Author.Last_Name FROM Book, Author WHERE Book.Author_ID = Author.Author_ID AND Book.Book_ID_Internal = '" + @BookID + "' AND Book.Title = '" + @Title + "' AND Book.Subtitle = '" + @Subtitle + "' AND Book.ISBN = '" + @ISBN + "' AND Author.First_Name = '" + @AuthorFName + "' AND Author.Last_Name = '" + @AuthorLName + "'", conn);DataSet ds = new DataSet();ad.Fill(ds, "Book");GridView1.DataSource = ds;GridView1.DataBind();} protected void BtnSearch_Click(object sender, ImageClickEventArgs e){BindData();}
I have a select statement that consists on something like this :
SELECT * FROM Products WHERE Ref LIKE '%" & Search & "%'
well this works ....but the problem is that i have some Ref in this format "MC-909" and if the user makes a search with the word "MC909" ...it dosent return any value ...
where nt.Project_type='A' and nt.status='Done' and nt.project_id like '06%'
I also need to add an additional condition : like '07%'. How can I do this, i. e I need the projects where the type = A , status = Done and project_id starting with 06 and 07.
Hi , This is my first message on this forum. Well, I want to write a query which finds the length of the employee names whose name starts with J, A or S?.
This is what I did:
SELECT LENGTH(ENAME) FROM EMP WHERE ENAME LIKE 'A%' OR LIKE 'J%' OR LIKE 'S%'
This query does not work. Can anyone tell me what is wrong with it?
I have a column named tags which contains tagnames seperated by commas now i have to compare this column with a parameter named tagname which contains a single tagname how to do this.Please help me
here is my procedure
ALTER PROCEDURE [dbo].[ProcSoftwaresGetSoftwaresbyTags] ( @FileTag Varchar(64) ) AS BEGIN
SELECT Category.CategoryName, Softwares.SoftwareFileID, Softwares.CategoryID, Softwares.FileName, Softwares.FileImage,Softwares.FilePath, Softwares.FilePublisher, Softwares.Adminrating, Softwares.FileDownloadCount,substring(Softwares.FileDescription,1,200)as FileDescription,convert(Varchar(12),Softwares.FilePostedDate,109)as FilePostedDate,Softwares.FileSize, SystemRequirements.OperatingSystem FROM Category INNER JOIN Softwares ON Category.CategoryID = Softwares.CategoryID INNER JOIN SystemRequirements ON Softwares.SoftwareFileID = SystemRequirements.SoftwareRequirementID where substring(Softwares.FileTag,0,3) LIKE substring(@FileTag,0,3) and FileStatus=1 END
I have two tables athat are structurally identical. I wish to obtain rows that are in the first table that are not in the second one (e.g. the EXCEPT operator). EXCEPT is not supported directly in TSQL...
