Null Entry In The Database
Jan 31, 2008
I am using a script component to retrieve some values from a server. This script component using Script task which uses VB.NET code. I have tested the VB.NET code and it returns a non null value for a string field 'sentence'. The 'sentence' feild is then passed on to an OLE DB Command transformation to be stored into the database along with a couple of other feilds.
The OLE DB Command transformation uses a stored procedure to store these feilds into the database. But when I check my table in the database, all other feilds are stored properly other than the 'sentence' feild which is null.
I am wondering what could be causingthis problem.
Thanks
View 3 Replies
ADVERTISEMENT
Aug 12, 2006
Hi,
In my Integration Scenario I have a source field 'CompanyTypeCode' which is nullable in 'tblCompany' and There is a specific lookup Table 'tblCompanyType' to map the codes with descriptions for this field. When I want to transform this table, The NULL Entries fail in Lookup and I ran into problem. Please suggest a clean solution for bypassing the lookup when the entry in source is NULL. (If I bypass the lookup, the flow changes since there is not an extra column from the lookup component any more, therefore I must have another OLEDB Destination if the code is NULL).
Regards,
Sassan
View 1 Replies
View Related
Sep 9, 2005
I have a column defined as smalldatetime. Default length (4), and "allow NULLS" is checked.In the Enterprise Manager UI, when i enter data into that table row, if i just tab past that column, all is well, and the value is represented in the UI as <NULL>.The problem comes once i ever enter a date into that column. Say i have entered a date (all is well), and now i want to remove that entry and go back to NULL (after the date value has been committed, different entry session, say).How is that done?It seems to me, once a date has ever been entered into that column, now, if i try to remove it, i get the error "The value you entered is not consistant with the data type or length of the column, or over grid buffer limit". I have tried deleting the value, entering spaces, entering the string NULL or the string <NULL>; maybe some other tries as well, but none works, i always get that error message and am not allowed to proceed past that cell until i restore a date value to it. I want to get back to <NULL>.Anybody know?Thank you.Tom
View 1 Replies
View Related
Nov 9, 2007
Hi, I know this is probably very simple but I am pretty new to this and have tried looking but cant seem to get the search criteria right. I have a database with a storeDate field which is of shortdatetime type. I am connecting to the database (MSSQL) via a stored procedure and returning all the records. I then use the code foreach (DataRow dr in ds.Tables[0].Rows) { DateTime dtTo = DateTime.Now; DateTime dtFrom = DateTime.Parse(dr["storeDate"].ToString()); TimeSpan diff = dtTo.Subtract(dtFrom); } I am basically trying to find out the age of the database entry by subtracting it from the current DateTime so i can delete records over a certain age. The problem (at least one of them!) is retrieving the "storeDate" object from the database and storing it in the dtFrom object. I have tried just assigning it directly as dtFrom = dr["storeDate"] and various other methods but I just don't know enough to assign it! Can anyone help me with this or spot any other mistakes in this process of removing old files automatically. Greatly Appreciated,Sean.
View 4 Replies
View Related
Aug 14, 2005
Here's some code that says it should identify if a user already exists in my database. I have changed the code to match my database, but it seems to have somewhat the opposite affect, rejecting all names (even new ones) or accepting all names (including existing ones). The switch in situations occurs in the "if" statement towardsd the end, when I change the sign of objDR.RecordsAffected. Do you have any idea what could be wrong? Thanks.
Function DoesUserExist(ByVal userName As String) As Boolean
Dim connectionString As String = "server='(local)Netsdk'; trusted_connection=true; Database='AuthorizedUsers'"
Dim sqlConnection As System.Data.SqlClient.SqlConnection = New System.Data.SqlClient.SqlConnection(connectionString)
Dim queryString As String = "SELECT [Users].[UserName] FROM [Users] WHERE ([Users].[UserName] = @UserName)"
Dim sqlCommand As System.Data.SqlClient.SqlCommand = New System.Data.SqlClient.SqlCommand(queryString, sqlConnection)
Dim Cmd as New SQLCommand(queryString, sqlConnection)
With Cmd.Parameters
.Add(New SQLParameter("@username", username))
End With
sqlConnection.Open
Dim blHasRows As Boolean
Dim objDR As System.Data.SqlClient.SqlDataReader = Cmd.ExecuteReader(system.data.CommandBehavior.CloseConnection)
if objDR.RecordsAffected > 0 then
blHasRows="True"
else
blHasRows="False"
End If
Return blHasRows
End Function
View 4 Replies
View Related
May 4, 2008
I know how to select the most recent row from a database:
SELECT TOP (1) Location, Date FROM Images ORDER BY Date DESC
But how do I select the second to most recent? or the third most recent? or the 4th, ect, ect, ect.
There must be some method to it, anyone have any suggestions?
View 5 Replies
View Related
Apr 22, 2006
I would like to be able to check if a certain entry exists in a SQL table. Ideally, the output would be a boolean so I can use it in an IF statement which would tell it what to do depending on whether or not the entry exists. Thanks for anyone that helps. :)
View 6 Replies
View Related
Jun 1, 2000
Hi,
Do you have any idea if there is / where can I find web based data entry into SQL 7.0 database. What I'm looking for is something like Oracle Forms but for SQL 7.0.
Thanks in advance,
Boaz
View 1 Replies
View Related
Jun 4, 2008
how to prevent the insertion of the same entry of an unique value into the database?
assume that I have a primary key username " abc" in the database
and then I insert the "abc" again ,the debuggging error msg pops out saying the primary key cannot be duplicated..
how can I do an if--else statement to check the database against this unintentional inputs of the same unique data " abc"???
View 7 Replies
View Related
Jan 14, 2008
Hi all,
From the http://msdn.microsoft.com/en-us/library/bb384469.aspx (Walkthrough: Creating Stored Procedures for the Northwind Customers Table, I copied the following sql code:
--UpdateSPforNWcustomersTable.sql--
USE NORTHWIND
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'SelectCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.[SelectCustomers]
GO
CREATE PROCEDURE dbo.[SelectCustomers]
AS
SET NOCOUNT ON;
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM dbo.Customers
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'InsertCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.InsertCustomers
GO
CREATE PROCEDURE dbo.InsertCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24)
)
AS
SET NOCOUNT OFF;
INSERT INTO [dbo].[Customers] ([CustomerID], [CompanyName], [ContactName], [ContactTitle], [Address], [City], [Region], [PostalCode], [Country], [Phone], [Fax]) VALUES (@CustomerID, @CompanyName, @ContactName, @ContactTitle, @Address, @City, @Region, @PostalCode, @Country, @Phone, @Fax);
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
IF EXISTS (SELECT * FROM sysobjects WHERE name = 'UpdateCustomers' AND user_name(uid) = 'dbo')
DROP PROCEDURE dbo.UpdateCustomers
GO
CREATE PROCEDURE dbo.UpdateCustomers
(
@CustomerID nchar(5),
@CompanyName nvarchar(40),
@ContactName nvarchar(30),
@ContactTitle nvarchar(30),
@Address nvarchar(60),
@City nvarchar(15),
@Region nvarchar(15),
@PostalCode nvarchar(10),
@Country nvarchar(15),
@Phone nvarchar(24),
@Fax nvarchar(24),
@Original_CustomerID nchar(5)
)
AS
SET NOCOUNT OFF;
UPDATE [dbo].[Customers] SET [CustomerID] = @CustomerID, [CompanyName] = @CompanyName, [ContactName] = @ContactName, [ContactTitle] = @ContactTitle, [Address] = @Address, [City] = @City, [Region] = @Region, [PostalCode] = @PostalCode, [Country] = @Country, [Phone] = @Phone, [Fax] = @Fax WHERE (([CustomerID] = @Original_CustomerID));
SELECT CustomerID, CompanyName, ContactName, ContactTitle, Address, City, Region, PostalCode, Country, Phone, Fax FROM Customers WHERE (CustomerID = @CustomerID)
GO
====================================================================================
I executed the above code in my SQL Server Management Studio Express (SSMSE) and I got the following error messages:
Msg 911, Level 16, State 1, Line 1
Could not locate entry in sysdatabases for database 'NORTHWIND'. No entry found with that name.
Make sure that the name is entered correctly.
===============================================================================================================
I know I recreated the NORTHWIND Database from a different Database before and I did not do anything for the entry in sysdatabases. How can I change the entry in sysdatabases for database 'NORTHWIND' now? Please help and advise.
Thanks in advance,
Scott Chang
View 5 Replies
View Related
Aug 7, 2002
Any idea what this error is?
error 911: could not locate entry in sysdatabases for database 'msdb'. No entry found with that name
Thanks.
Sa
View 1 Replies
View Related
Apr 6, 2007
I have a form view that I am using to insert new data into a sql express database and would like to find a way to avoid attempting to insert a record if the key already exists. is there a way to do this with the formview insert command. Everything works great until I try to add a record with an already existing value in the unique key field, then it breaks.
View 1 Replies
View Related
Oct 18, 2007
I am getting the exception - System.Data.SqlClient.SqlException: Could not locate entry in sysdatabases for database. Does anyone has any idea, how to resolve this?
Thanks
View 2 Replies
View Related
Jun 28, 2004
I would drop and add the table but the data can't be deleted. So if anyone could help with the statement it would be greatly appreciated. Thanks
View 7 Replies
View Related
Oct 27, 2015
We have a case where in we should show date based on conditions for e.g if we had a column defined as
col varchar(10) then we would show col as 'NULL' for some condition and actual value when no condition
Normaly date values are stored here e.g under col 20150901 .
Case
when col>'20150901' then 'NULL'
else col
end as Derivedcol
Note this is an extract process and we are presenting data by pumping the data in a table .
Now there is another similar column -colz varchar(10) which stores date but doesnt have case condition so whenever date has no value its shows null which is database null.
So whats the difference between database null and string null ?
How can we show database null for the case condition instead of string "null"?
View 10 Replies
View Related
Sep 20, 2006
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
AND DR.languageid = isnull(@inlanguageid,null)
AND DR.[ID]= @ID
)
go
set ansi_nulls on
View 3 Replies
View Related
May 18, 2006
I am considering not to allow null values in the database.
what are pros and cons ?
View 3 Replies
View Related
May 31, 2007
In my database, in a few tables there are NULL values in some of the columns. This is okay, but I need to know how to query for nulls. For example I tried the following query but it did not work:
select * from Employee where DateOfBirth =NULL
This did not work so I also tried the following:
select * from Employee where DateOfBirth ='NULL'
Neither of these worked. Can someone help me out?
View 1 Replies
View Related
Dec 14, 2005
I have a problem I 'get stuck on it. i hope someone can help me.
I have a SQLServer table with an ID-field with a primary key and identity on it, and a couple of other fields with defaultvalue "" and NOT nullable
When i like to update an record in an formview of ASP 2.0 and fill in all fields everything is updated and everything goes fine
but
when I leave one field blank then I get the message 'can not enter null value in column X'
even when I place in the Updateparameter in my code
<asp:Parameter Name="Name" DefaultValue="" /> ASP tries to update an Null value
when i place an space as default value like
<asp:Parameter Name="Name" DefaultValue=" " />
everything goes fine exept there is an space in my database.
How can I update my record, and leave some textboxes emtpy AND where my fields are NOT nullable
I'm getting desparate of this.
make my fields nullable is not an option because this is a 'customerswish'
Please help
View 2 Replies
View Related
Nov 11, 2007
I closed my db connection and now I guess I'm supposed to set it to null...how do I do that? I've tried a few ways without success.
Thanks!
Jamie
View 4 Replies
View Related
Feb 12, 2014
I would like to know if it's possible to pass NULL value to the database. I want to update a column, a parameter has to be passed in to do so, i.e @value = '123'. but if there were no parameter value, i.e @value = '', I want to the value in the database to be NULL. I don't want to pass (''). can this be achieved?
View 5 Replies
View Related
Jul 12, 2007
Hi
I want to know how do we store null in the database
i know Null is unkown value
but it has to be something so the SQL server can know its null ( computer only knows 0s and 1s )
is it pointers and null does not have a pointer?
or do we store something physically?
an example : we have string(varchar) column that has this value in it "Joey Tribbiani" that means in the hard disk we will see 14 bytes "Joey Tribbiani" in there, if we changed the value to "Monika" the 14 bytes will be replaced by 5 bytes "Monika", if we changed to empty strike then we will have 0 bytes ""
now if changed it to become NULL what is going to happen to the hard disk, what is going to be in there physically??
may anyone help me in this?
many thanks
View 3 Replies
View Related
Mar 13, 2007
hi guys. i'm using vb.net with vs 2003 and MSSQL Managment Studio Express as my database server.
i want to insert null value into database, so i use System.DBNull.Value
but it doesn't show NULL, but a empty field. I tried System.DBNull.Value.ToString, it gives me same result.
what can i do to have NULL in that field?
thanks for any advise, i would appreciate it very much.
View 2 Replies
View Related
Nov 17, 2006
Hi there,
I have a fairly generic question regarding database design.
I am working on my first database using SQL Express.
I am testing the database by inserting records into the pre defined tables.
Sometimes I forget to input text into a non null field. When
this happens it displays an error and then skips a few rows
which makes my row numbering messy. For example say I have
Row 1, Row 2 Row 3 all nicely formatted but on Row 4 I make a mistake
this row then disapears and their is gap between 3 and 5 where 4 was.
Although I am just testing, I was wondering what happens in a real
scenario if an inexperienced data input person makes a few mistakes it
makes the database numbering systems look bad. In this case
is it common to make most fields NULL to allow for admin errors??
View 8 Replies
View Related
Jun 8, 2007
I am currently using the following code to populate fields in a form EditUserNotes.Text = EditUserReader.GetString(2); which works just fine (the datatype in the database is 'text') as long as the data stored in the database is not null. If the data is null, I get the error: Data is Null. This method or property cannot be called on Null values. which is really annoying as there are times when the data stored in the database is legitimately NULLI can use the following code to fix the problem, but it seems less elegant EditUserNotes.Text = EditUserReader.GetValue(2).ToString() is there really a difference between the GetString and the GetValue(x).ToString() methods or are they interchangeable?
View 3 Replies
View Related
Feb 27, 2008
Hi,
I am building a website in ASP.net C# for a university project, and would like to search a table (Member) for a field (UserName) using a session variable Session["sUserName"]. If that field is null, then I would like to insert that session variable into the field to start to create a new user. However, I am getting errors saying that I am using invalid expression terms. My code is;
//Create the Command, passing in the SQL statement and the ConnectionString queryString = "SELECT UserName FROM Member WHERE (UserName = @myUsername); ";
SqlCommand cmd = new SqlCommand(queryString, sqlConn);cmd.Parameters.Add(new SqlParameter("@myUsername", Convert.ToString(Session["sUserName"])));
//If UserName is null, display confirmation, else display errorif (UserName == null) ;
{UserNameCheckLabel.Text = "Username okay";
String queryString = "INSERT INTO Member (UserName) VALUES(@myUsername); ";SqlCommand cmd = new SqlCommand(queryString, sqlConn); cmd.Parameters.Add(new SqlParameter("@myUsername", Convert.ToString(Session["sUserName"])));
}else;
{UserNameCheckLabel.Text = "That username is in use";
}
I have a feeling I should be checking the database for the UserName, but I'm not sure whether to put this in the SELECT statement part or as a method... I would be most grateful for any advice!
Many thanks,
Chima
View 7 Replies
View Related
Jun 16, 2008
I am using SQL server. And, I have a database: imgID int (primary key)imgData image imgTitle vchar When I am going to perform insert command in my webpage, it pops out primary key cannot be null error! Isn't primary key automatically generated? Or, where should I define it?
View 2 Replies
View Related
Oct 31, 2004
how can i pass null value to database? date is not required field in my database. i can pass default date but i think default date is not good in my case as it is DOB of a customer.
View 19 Replies
View Related
May 11, 2005
Hi,
I'm using this source code in order to set the DateTime field of my Sql Server database to null.I am retreiving dates from an excel sheet. If no date is found, then I set my variable myDate to DateTime.MinValue then i test it just before feeding my database.
I have an error saying that 'object' does not contain definition for 'Value'.
In french : Message d'erreur du compilateur: CS0117: 'object' ne contient pas de définition pour 'Value'dbCommand.Parameters["@DateRDV"].Value = System.Data.SqlTypes.SqlDateTime.Null;
The funny thing is that in the class browser i can see the Value property for the class Object...
C#, asp.netstring sqlStmt ; string conString ; SqlConnection cn =null; SqlCommand cmd =null; SqlDateTime sqldatenull ; try{sqlStmt = "insert into Emp (Date) Values (@Date) ";conString = "server=localhost;database=Northwind;uid=sa;pwd=;";cn = new SqlConnection(conString);cmd = new SqlCommand(sqlStmt, cn); cmd.Parameters.Add(new SqlParameter("@Date", SqlDbType.DateTime));sqldatenull = System.Data.SqlTypes.SqlDateTime.Null; if (myDate == DateTime.MinValue) {cmd.Parameters ["@Date"].Value =sqldatenull ;} else{cmd.Parameters["@Date"].Value = myDate;}cn.Open();cmd.ExecuteNonQuery();Label1.Text = "Record Inserted Succesfully";}catch (Exception ex){Label1.Text = ex.Message;}finally{cn.Close();}
View 3 Replies
View Related
Feb 22, 2005
Hi
post a sample code
create table testNull(
a int not Null,
b varchar(5),
c varchar(5) )
insert into testNull (a,b,c) values(1,'Alex','test')
insert into testNull (a,b) values(2,'Alex2')
1. select * from testNull
-- return 2 rows
2. select * from testNull
where
a <> 3
and
b <> 'C1'
and
c <>'C2'
-- return ONLY 1 ROW !!!
3. select * from testNull
where
a <> 3
and
b <> 'C1'
and
isNull(c,'') <>'C2'
query 2 will retun only 1 row, because value of column c is Null
Question
Is any setting could be changed on db or server level to prevent errors with missing row in 2-nd query , or I have use isNull operator for every column acepting Null as value ?
View 1 Replies
View Related
Dec 30, 2006
Hi, how do i do a select statement with asp.net to return a record if a field is null. I have the following code:
SqlCommand cmd = new SqlCommand("SELECT * FROM Categories WHERE ParentId = @ParentId", cn);.Parameters.Add("@ParentId", SqlDbType.Int).Value = parentId != null ? (object) parentId : DBNull.Value;cn.Open();
The variable parentId is a nullable int. However when i pass in a null value it doesn't return anything even though there are records in the database that have a null value for the ParentId field.
Appreciate if someone could tell me what i am doing wrong. Thanks
View 6 Replies
View Related
Apr 12, 2007
Not sure what i'm doing wrong here. it seems to be sending nulls or no value to database in places where i want it to send the @headline and @entryhere's the .aspx code: <%@ Page Language="c#" MasterPageFile="~/MasterPage.master" AutoEventWireup="true" CodeFile="NewPost.aspx.cs" Inherits="NewPost" Title="Scribbler Insert" %> <asp:Content ID="PageBody" runat="server" ContentPlaceHolderID="PageBody" ><table border="0" width="700" > <tr> <td width="80" valign="top"> Subject: </td> <td width="620" valign="top"> <asp:TextBox ID="txtHeadline" runat="server" Width="400px"/> <asp:RequiredFieldValidator runat="server" ID="RequiredFieldValidator1" ControlToValidate="txtHeadline" ErrorMessage="Headline is required" Display="Dynamic" /> </td> </tr> <tr> <td width="80" valign="top"> Text: </td> <td width="620" valign="top"> <asp:TextBox ID="txtEntryText" runat="server" TextMode="MultiLine" Height="250px" Width="400px" /> <asp:RequiredFieldValidator runat="server" ID="RequiredFieldValidator2" ControlToValidate="txtEntryText" ErrorMessage="Text is required" Display="Dynamic" /> </td> </tr></table><asp:Button ID="btnPost" runat="server" Text="Post" OnClick="btnPost_Click" /><asp:Button ID="btnCancel" runat="server" PostBackUrl="~/Admin/Admin.aspx" Text="Cancel" /> <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:scribblerdbConnectionString %>" ProviderName="<%$ ConnectionStrings:scribblerdbConnectionString.ProviderName %>" InsertCommand="INSERT INTO entries_tbl (Headline, entry, PostedBy, PostedDate, PostedTime) VALUES (@Headline, @Entry, 'SteveP', '2007-12-12', '12:44');" > <InsertParameters> <asp:ControlParameter Name="Headline" ControlID="txtHeadline" PropertyName="Text" Type="String" /> <asp:ControlParameter Name="entry" ControlID="txtEntryText" PropertyName="Text" Type="String" /> </InsertParameters></asp:SqlDataSource></asp:Content>
View 2 Replies
View Related
Apr 27, 2007
I have a form and a connectionString to a SQL database. If the textbox at the form is empty i want to store a null value there but when i pass this value as a parameter it brings the following error: Failed to convert parameter value from a String to a Int32..
cmd.Parameters("@Segundo_nombre").Value = txtSecondName.Text.ToString --> suposing is null it brings an Error.
cmd.Parameters.Add(Apellido)
How can i manage this? I want to store this value if it is null or not.
Also i don't know how to assign a null value to a variable. I tried with
v_flag = check_selection.check_string(v_idioma)
If v_flag = 1 Then 'la variable posee el texto Seleccione
v_idioma = DBNull.Value
but it's not working.
Thanks!!
View 1 Replies
View Related
