I was told that there is no relationship between max_connections and number of licences. So how can i know when the number of user connections exceeds the number of licenses per server (with the error 18458 - the maximum simultaneous user count of %d licenses for this server has been exceeded)? Because I did some tests by openning a number of connections greater than my number of licenses and i didn't get any error.
View 1 RepliesI would like to know does it exist a relation between number of licenses (per server) entered when installing SQL Server and the maximum of connections obtained by @@MAX_CONNECTIONS ? how can i get the information about the number of licenses after the installation ? Thanks.
View 1 Replies View RelatedHow do you find the number of licenses that are installed on a SQL Server2000?
View 2 Replies View Relatedhi all,
our company is using SQL Server 2000 Standard Edition as a backend for inventory and sales data storage.
The top management of our company has decided to web enable all the data for sales and inventory so that any authorized user can have access to the data from anywhere in the world.
now my question is that how many SQL Server licenses will we require if we are going to use it for the web?
We currently hold 20 licenses.
Thanx in advance.
I have got a licensed copy of MS SQL Server 2005 Standard Edition. I am wondering how I can go about telling how many Processore Liscenses or Client Licenses I have with it. I have just the disk set and product key, no box. Any clues?
View 1 Replies View Relatedhello!
i am getting the following error in the windows NT event viewer daily atleast twice or thrice...
"The product Microsoft SQL Server 7.0 is out of licenses. Use License Manager from the Administrative Tools folder for more information on which users are out of compliance and how many licenses should be purchased. "
we have recently got an open license agreement also for sql server from microsoft.till now we were using a temporary license.how to apply the details in the certificate so that i don't get the error?
Dear All
I have developed a system which has SQL server as a backend... Reading Microsofts Licensing required i m a bit puzzled if a CAL license is required for each user that is created on my system. i.e. If my system has 5 users, do i need 5 CAL licences.. however, in order to present the required data to these users i log to SQL server with the same single account.
Regards
Can you change your license setup if it was initially done by seat andyou want to change it to by processor? The server is already up andrunning in a production environment. If so how?
View 2 Replies View Related
As I understand it, if I have a 4 CPU box and I buy 4 processor licenses for SQL Server 2005 Standard, I can run 16 instances of SQL Server on that box.
Now given a cluster set up for active/passive I understand that if I license the same way I can have 16 instances on one of the nodes of the cluster. In the event of a failure, the instances can fail over to the "passive" node and the licenses move with them.
So heres the question. Given my two node cluster, each node has 4 CPUs, if I have some of the resources on node 1, and others on node 2, so instances are running on node 1 and node 2, am I on the hook for 8 processor licenses?
I've just installed Workgroup Edition for the first time. I have copies on each of two servers, each ordered with five CALs.
My problem is that I don't know how to assign the licenses. I can't find anything in the documentation about it, nothing in the tools menus, and no reference to SQL Server in the Licensing application. The latter really looks like the right place, so if I had to guess, I'd think I've installed something incorrectly. Shouldn't SQL Server appear there as a product?
Of course, I'd also think this would be documented somewhere, but then it's probably one of those things that any idiot would know, so there's no need to explain it.
Once I get past that problem, I'll be setting up eight workstations. I understand from Microsoft Sales that since I've purchased a total of ten CALs, then all eight workstations will be able to access either server. Do I have to do anything special to make that work? Currently, there's no domain. The servers are just members of a workgroup.
Thanks,
Dick
Hi all,
I hope I am on a suitable thread. Sorry if I'm not. I just need to know if I need a license in order to write a commercial application using Visual Studio 2005. And, if so, is this license necessary to me as a developer or to my customer that will purchase the application at the end?
And something more. ASP.NET runs on IIS, which is shipped with Windows Server, correct? So, once my customer purchases Windows, he doesn't anything more in order to run a ASP.NET application (which will finally access the SQL Server DBMS). Is this correct?
Thanks in advance
Lambros
I need to install some SQL Licenses but the Control Panel applet is non-functional (It states that I have an NFR version of NT). Is there another way to activate licenses?
View 2 Replies View RelatedI've purchased and installed SQL Server 2005 along with some licenses and I now have a 'Microsoft Open License Confirmation Letter' in my inbox.
How do I add these licenses to SQL Server and get them active?
How do I check to see how many licenses SQL Server contains?
We are
looking for a solution for a client that we will make software for. We are a ISV. After
completion of the software, our client then wants to sell this software to their
partners, people in that business, etc. We do not want to add any additional cost, by means of them(client(s)) purchasing
a server, server software or licensing. Is there any solution
that will make this work? A runtime or embedded database solution? If there is a
license we need to purchase, what would that be? SQL Express Edition work?
My company uses a quad processor server connected to a SAN to load and summarize detail sales information from 2000 stores on a nightly basis. We poll and load around 5,000,000 rows of data each night. THis information is summarized up to various levels, then replicated to one or more secondary datamart servers for end user access via web reporting, BI tools like Proclarity/Analysis Services etc...
The initial data polling server is only touched by the development staff supporting the process (1-5 programmers) and is licensed for SQL server Enterprise using a CAL model. Each datamart server is licensed with MS SQL server processor licenses.
The question: We were told that the quad processor polling machine, which has no end user access allowed, must be licensed with processor licenses since it touchs the data ultimately consumed by end users. This makes no sense to me.
The Microsoft white papers discussing multi_tier environments don't seem to address this type of issue. They focus on applications that ultimately pass thru a data request to the SQL server machine. In this situation, user requests are handled by the datamart servers, which are licensed with processor SQL licenses.
Can anyone clarify?
Thanks, Mike
Hello everybodyI've got a small system (~20 client machines) connected to one SQL Server2000. Two of these machines refuse to connect to the database. As I don'tknow how the license system is supposed to work, I haven't investigatedtoo much yet.My question is therefore:Will SQL Server 2000 Enterprise Edition refuse to accept any newconnections when all licenses are used?Is such case, what tool do I use to add more licenses?thanks in advance--Johnny Ljunggren
View 3 Replies View Relatedwe have a sql express - that comes standard with servers.I just wanted to know.....Is there any addition Client access licenses needed for this sql express or not.
View 1 Replies View RelatedHello our organization has never had any problems getting users to connect to our SQL servers but we have grown a lot over the past year or two. Does SQL Server actually block connections if they go over the license limit? I don't have access to the servers to see the model used but I have been asked to look into this. I couldn't find any information on this so I decided to ask you guys. Thanks in advance.
View 4 Replies View Related
I have been testing and developing with Sql 2005 enterprise eval. Now ready to deploy, and we have purchased a "device" and 5 "cal" licenses for each box. What is the recommended procedure for applying Sql 2005 "standard" licenses to existing boxes having 2005 enterprise eval. installed? I do not want to delete and re-install sql server if at all possible!
Thanks!
Ken Ambrose
Hello,This is hopefully just a quick question. I'm looking to re-jig our in-house development infrastructure and part of that will be some sort of SQL Server product, and I'm hoping it will be the Developer edition.My question is, how many copies of the Developer edition would I need to purchase, if I have one Windows 2003 server (which will server the databases) and two client machines which will use it.My initial thought is 2 copies, one for each user (as the license states). But what about the server? Do I just install one of the two copies onto the server and the license covers the two client connections?This might seem a silly question with an obvious answer to you guys. However, am I right? I just need to get this clear in my head.Thanks in advance..
View 2 Replies View Related
I have created a local user on Report Server Computer and the user has the administrative rights.
When i try to connect Report Server (http://xxx.xxx.xxx.xxx/reportserver) with this user's credantials. (ReportServer directory security is set -only- to Basic Authentication. ).
I get the following error.
Reporting Services Error
--------------------------------------------------------------------------------
The number of requests for "XXXServerXXXUser" has exceeded the maximum number allowed for a single user.
--------------------------------------------------------------------------------
SQL Server Reporting Services
Then i try to login using a different user with administrative rights on the machine, i can logon successfully.
The system is up for a month but this problem occured today?!? What could be the problem?!?
Hi
I want to enter rows into a table having more number of columns
For example : I have one employee table having columns (name ,address,salary etc )
then, how can i enter 100 employees data at a time ?
Suppose i am having my data in .txt file (or ) in .xls
( SQL Server 2005)
Got this query and I need the following result;
declare @NumberToCompareTo int
set @NumberToCompareTo = 8
declare @table table
(
number int
)
insert into @table
select 4
[Code] ....
The query selects 4 and 5 of course. Now what I'm looking for is to retrieve the number less or equal to @NumberToCompareTo, I mean the most immediate less number than the parameter. So in this case 5
in my sql, i want to change a decimal number to percent format number, just so it is convenient for users. for example there is a decimal number 0.98, i want to change it to 98%, how can i complete it?
thks
Hi,
I am currently designing a SSIS package to integrate data into a data warehouse fact table. This fact table has about 70 columns among which 17 are foreign keys for dimension tables.
To insert data in that table, I have to make several transformations and lookups. Given the fact that the lookups I have to make are a little complicated, I have about 70 tasks in my Data Flow.
I know it's a lot, but I can't find a way to make it simpler. It seems I really need all these tasks.
Now, the problem is that every new action I try to make on the package takes a lot of time. At design time, everything is very slow. My processor is eavily loaded each time I change a single setting in one of the tasks, and executing the package in debug mode takes for ages. If I take a look at the size of my package file on disk, it's more than 3MB.
Hence my question : Are there any limitations in terms of number of columns or number of tasks that can be processed within a Data Flow ?
If not, then do you have any idea why it's so slow ?
Thanks in advance for any answer.
I have a large table of customers. I would like to add a column that contains an integer, unique to that customer. The trick is that this file contains many duplicate customers, so I want the duplicates to all have the same number between them.the numbers dont have to be sequential or anything, just like customers having the same one.
View 8 Replies View RelatedI have a table that has a street number field.
if the user types in a street number of '2' i would like to return all street numbers the begin with 2 (2,20,21, 200, 201,205,2009,...)
how can this be done.
Hello people,I might sound a little bit crazy, but is there any possibility that youcan incorporate 4^15 (1,073,741,824) tables into a SQL Database?I mean, is it possible at all? There might be a question of whereanyone would want so many tables, but i'm a bioinformatics guy and I'mtrying to deal with genomic sequences and was coming up with a newalgorithm, where the only limit is the number of tables I can put intoa Database.So, can you please advise if its possible to put in so many tables intoa SQL database? Or is the Bekerley DB better?
View 3 Replies View Related1. how to show page number & total page number in report body?
2. how to show total records number?
I want to format a number like "#,##0.00" in order to handle it in Excel as a number (i.e. compute a sum).
Excel is able to show a number in a specail format and still allow to compute with ...
Thanks in advance,
Peter
I am testing something in Visual Basic
that talks to a database and I want to
filter results by -> field1 like "###".
However, that 'like' and '#' is VB syntax.
How do you say that in SQL?
i am an asp programer trying to program in aspx c#
i have a litle problem geting the id number from my sql db and put it into an intiger
what i am doing is that i am trying to make the picture have the same name as the id number in the db
String sql = "SELECT id ";
sql += " FROM PictureLibrary";
sql += " ORDER BY id desc";
int pictureNR = ??
I have tryed to find a way to include the row number in a querry but without result.
I have a table select some rows ordered and now I will add a column called rank
How do I get the rownumber in the field rank ?
Thanks in advance
Jan O