I have set up 80 connections to the SQL Server - mostly through code. People have been successfully using the database, but then when they come in to use their computer and the database the next day, their connection is completely gone! What is that all about? So far this has happened to 2 or 3 different users. Any idea why?
Thanks.
A colleague of mine has a problem;
"Has anyone ever experienced the problem of creating a System ODBC and it doesn't display in the ODBC administrator applet?"
was hoping someone here could help...
Hi.
I'm sorry of my english.
I have to servers.
Server A (local machine).
Server B (Remote machine with Integration Services withpackages after deployment).
In Server B i have some packages with ODBC connection..
In the Server A I have created the same ODBC connection.
I need to execute the packages that are in the Server B in the Server A.
I execute them throw dtexec in cmd in the Server A.
The problem is that it starts to execute but gives an execution error because it gets confused with what Server system should be used (both have the same ODBC connection).
If I run the packages throw cmd in the Server B everything goes OK.
Can anyone help me!?
Thanks.
so im trying to connect to an odbc source and use ado.net to pass some sql queries and then write back into this odbc connection. i am aware that ssis does not have direct capabilities to do this, but i wanted to see if anyone knew of generic help docs/url's that show how to do this? i am new to ssis, and am just trying to get general information.
View 4 Replies View RelatedHello all,
I was wondering if there is a way to move ODBC connections between SQL servers? We are replacing our current server with newer hardware, and I have pretty much everything figured out except this.
Thanks for any help and/or hints.
We have spent days trying to perform a proof of concept and I amdissappointed with SSIS to say the least. We are trying to connect andfetch data from a Double Byte Progress database and the "DataReaderSource" using a ADO .NET ODBC provider does not work! I understandthat SSIS is a totally rewritten version of DTS. What annoys me isthat this functionality used to work in DTS and does not in the muchtalked about SSIS!! Will someone in Microsoft start listening tocustomers instead of gloating on useless features. SSIS is a totalwaste if it cannot connect and fetch data from a wide variety ofsource databases!!
View 6 Replies View RelatedHello everybody!I'm using the 'Data Sources (ODBC)' program that comes with windows tocreate the odbc connections I need. Although that is quite fast and easy Iwould like to have it more automated, since I'm using the same parametersall the time.Can anybody tell me (or give pointers to) how that is done?regards--Johnny Ljunggren
View 2 Replies View RelatedI have a user AD account SOPUSJSmith for example. I have given this account security admin at the SQL Server level and dbo at the database level. Is there any way to prevent them from using ODBC to pull data into an Access DB or an Excel spreadsheet?
Thanks in Advance - SOX is killing me!
I am using ODBC to connect to SQL Server. The documentation says that ODBC transactions are managed on the connection level and cannot span connections.
Does this mean that two instances of my code using transactions (each with its own process and a single connection) in the same machine accessing the same database will not play nice together (violate transaction rules)?
Thanks
Dear All,
I like to know if anyone of you out there can help me solve this issue. I need to generate an SQL Query to access two different FOXPro (databases) connections.
Example,
Connection 1 - has a DSN setup of CMSBM and it sits in the path of D:/CMS/CMSBM/= and the table is bmboml15
Connection 2 - has a DSN setup of CMSMA and it sits in the path of
D:/CMS/CMSMA/= and the table is maprodl15
I am coding in ASP.NET using C#. I have tried the command like:
SELECT codeno, link, type FROM bmboml15 IN CMSBM INNER JOIN maprodl15 IN CMSMA ON bmboml15.codeno = maprodl15.codeno.
Obviously the above query is not a working one and a very poor construction.
Please help!
Thanks
Clo
If I have 100 ODBC clients all submitting the following SQL at the same time how do I know that the SQL inside the conditional only gets executed once. It appear SQL Server is preventing it from happening but was curious how. Or do I need to add something to prevent it from happening.
IF NOT EXISTS (SELECT name FROM sysobjects WHERE type='U' AND name = 'mytable)
BEGIN
CREATE table mytable (task int NOT NULL, first_name varchar(128), last_name varchar(128))
END
I have just migrated from SQL 2000 to SQL 2005 and in the process upgraded to new hardware. I am now running SQL2005 (64 Bit) on Windows 2003 R2 (64 Bit). The problem is that when i deploy some reports to the new server that use ODBC to connect to the data, reporting services is erroring with :
Data source name not found and no default driver specified
The ODBC connections are set up exactly the same on the old server and the new server. Is it because it is looking for a 64 bit ODBC driver and not the 32 Bit one I have installed. If i go into the SysWOW64 and run the odbcad32.exe i can see the drivers and the connection. The connection test works fine from here.
Thanks
When I move an SQL group to the other cluster member, it seems that the ODBC connections hang on the client web servers, and do not process any queries until they are rebooted. I'm using IIS/Cold fusion web servers with an SQL 7.0 Cluster (MSCS). Any ideas why this may be happening?
Thanks,
Steve Johnson
As stated in the subject I have a situation where if database mirroring is employed for either manual or automatic failover, all the client (including web connections) connections use ODBC not ADO, or OLEDB etc... so what methods are recommended? Client side redirect is not available so I could not employe the "Data Source =A; Failover Partner=B..." option.
Right now the method employed (pre database mirroring and basically employing log shipping on SQL 2000) is to have a DNS alias for the ODBC connection so that if the server were to change in a failover situation the DNS record would have to be altered, so that all the client connections would not have to be reconfigured.
Regards,
Dominic Baines
We have a SQL database that uses Active Directory with Windows Authentication. Can users that are members of the Active Directory group that has read/write access to the SQL database create ODBC connections to access the database directly and update the data? They dont have individual logins on the server. They are only members of the Active Directory group that has a login?
View 1 Replies View RelatedI have a similar problem to the one indicated by David Van Diest. I could not find any answers to his query.
Could anyone help!
Thanks
Mon, 8 Feb 1999 16:24:55 -0600
From: David Van Diest
[sql7] DTS and disappearing indexes
I have noticed that if I use the Microsoft ODBC driver for SQL Server when I
transfer data from one database to another my indexes disappear. If I pick
other odbc source and then fill in the data source my indexs do not go away.
Anyone else see this behavior? I don`t think it should be working this way.
Thanks,
Dave
I am experiencing a situation where I issue a lengthy SQL command to MS SQL Server 7.0 through MTS and it "disappears" - no errors or recordsets are returned. The command is "SELECT * FROM CUSTOMERS WHERE LASTNAME LIKE 'SMITH%'". When I issue this command from SQL Query Analyzer it takes 27 seconds to return 87 rows. When I issue this exact same command through MTS it does not return at all.
I've used the SQL Profiler to analyze the requests. It shows the commands from MTS starting but they never stop (or at least the profiler never reports them as stopping). The same commands coming from Query Analyzer are reported as starting and stopping without fail.
Here's a twist: I can issue less demanding commands (ie, one that doesn't take so long to process) through MTS and they come back fine. For example, when a user logs into my application, I use an SQL statement to verify the user name and password and status the user as logged in. This is routed through MTS and it comes back fine in less than a second. Same application, same PC, same MTS and SQL server, same SQL database. The only difference is that the CUSTOMERS table has over 800,000 records and the USERS table has only 5 records.
PLEASE HELP!
HELP!!!
I have three servers replicating. One is a publisher and two subscribers. If I put data in the publisher, some of it will disappear after replicating. When data is entered in one of the subscribers, the same thing happens.
Anyone have any ideas??? I am doing a merge replication and all servers are running SQL Server 2000.
Kameron
Ok, I'm new here and I REALLY need some help here.
In my organisation, we have a Server with MSSQL 7 running with some databases. Some of the databases are published for replication.
Now, since Monday, we've been losing databases that are in use! :confused:
The files are disappearing and being marked as suspect in SQL. The physical file has been deleted from the machine even when SQL is running and on some databases are replicating. In one instance, we were making permission changes on a user and it just said that the file is no longer there. And when we checked, the msdb system database had disappeared as well. So now the server is showing up as having no databases. We were able to recover some of them through backups and a handy recovery tool. But now we are helpless as to WHY this is happening. We suspect Virus but we have Norton CorporateEdition running and Liveupdate updating every day.
I've searched the web for any one that had the same problem, but nothing came up. Only some stuff saying that space was an issue, but not on a drive with 21GB remaining and the biggest database is 3GB...
Any help, insight or resolution will be greatly appreciated.
I am running an Access 2000 MDB against a SQL 7 back end, using ODBC linkedtables over a LAN and a WAN. The system has been operational for years withrelatively few problems.Recently, WAN users have been reporting several hundred records disappearingat a time. The records are all sequential, and they're in a table thatcontains about 60,000 records. This all started last week at about the sametime (not sure if before or after) that the WAN went down for a couple ofhours for an unknown reason. Since then, every once in a while, a WAN userwill report that several hundred records in a block are just "missing."Then, an hour or two later, they reappear.Any ideas as to what's going on or what can be done to rectify this?Thanks!Neil
View 8 Replies View RelatedI am not sure where to put this but correct me if i'm in the wrong forum.
I've been working on this database for some time now. It's an Access 2003 database with a SQL backend. Everything was going well until one of the users noticed her data was disappearing after she send an email. The database has a memo field that gets pasted in the body of an email when it is created. Sometimes, when the user sends an email and goes back into the record, the memo field is blank. I know the field has data in it at the time of the email because it will give you an error if the field is null and you won't be able to send it. And, it goes into a history table with everything the user does with each record. I've checked this history table and it shows that all records in question, an email was sent. I have no idea why the data would disappear in this field. It does not happen all the time. I've performed the same steps and I can't duplicate the problem. There's no code associated with the memo field that deletes it after sending the email. Can anyone think of anything that would cause this?
The problem i am facing here is disappearing data in sql server 2000. I
not sure what is the problem, but it is getting worse and worse. Anyone
can point me to a right direction whether this is a security
vulnerability which i need to download the patch, or is it my computer
is infected with virus., or is it a bug in sql server?
I remember having read somewhere about this problem also, but not sure
in which website already. Anyone, please help!!! Because we are going
to deploy to production server soon, and this is a problem that need to
be solve ASAP..
Thanks in advance...
I am supporting a system that needs to allow users to have access to Temp DB. I set these users up using the GUI, but whenever the server is restarted, these users are wiped out. Is there anyway to keep these users when the server is rebooted?
Thanks for any help.
A user created stored procedure is dropped from system tables where no known drop procedure command is executed.
From ISQL the procedure runs properly after creation but, at sometime during execution the procudure dropped from the system tables.
Any help would be appreciated.
Environment:
SQL Server 6.5 sp4, windows NT 4 sp3, db-library, visual C++
Hello together,
strange things going on:
1. The table statistic shows for example 67 rows in a table, select count(*) only returns 63 rows.
2. Table statistic shows 50 rows, select count(*) returns 55 rows.
In both cases if you do an insert the newly inserted row sometimes can be retrieved by a select statement sometimes not. Row statistics sometimes is updated correctly, sometimes not.
Integrity check for these databases says everything is fine. DBCC CHECKDB, DBREINDEX, UPDATESTATISTICS, ... does not help or says everything is fine.
Already opened a case at HP's Microsoft support and they involved Microsoft itself but all are a little bit clueless at the moment.
As this is our main DB cluster and several databases are affected we had to stop most of our applications since last Thursday and now we are getting a little bit in trouble so any hint is very welcome.
Thanks in advance
PS: Restore is not an option - as all tools say everything is fine all of our backups from the last months include the error. Don't ask why nobody recognized the lost data earlier, seems they were stored but not required for some time.
I am using a hosted MSSQL 2000 database that powers the backend of mywebsite. Website visitors interact with it via ASP pages I havedeveloped. I also have an internal FileMaker 7 database thatperiodically synchs with it via Filemaker's ODBC functionality.Several times now, I have come in one day to discover that my ASP pagesdon't work. When I look into it, one of my MSSQL tables will be missinga few fields. There is nothing in any of my code that sends an ALTERTABLE command or any other command that affects table structure. Thesedeletions of fields is totally random.The most recent example was with a table called FreeTeacherSubs. I justdiscovered today that three fields went missing:HowDidYouHearAboutYES TEXTFollowUpCallOrEmail TEXTHowMaterialsFit TEXTSuffice to say I am baffled! Has anyone ever experienced fieldsdisappearing from their tables?Kevin
View 2 Replies View RelatedHi,We have a SQL server db backend for our ERP system. I have written aCrystal Report to extract data from one particular table calleditemspecbomw (c.30000 records) which contains amongst other thingsBill of Materials costings. When I run the report I know that somerows are missing as when I look at values through the ERP systemitself, the values are different.What I have found is that when I run the equivalent ERP system report,the Crystal Report I have written shows extra rows. SQL Query Analyserbehaves exactly the same as the report I have written even when usinga "select * from". I have tested opening up a bigger tables (c. 700000records) which appears without a problem. If anyone knows why thismystery is happening, I woould be grateful for your help.Many thanks,Tony.
View 2 Replies View RelatedI'm using an Access front end to a SQL 2000 database.I have a form from which I enter data. Everything seems fine, I check thetables and my records are being inserted.When I close Access and reopen it, data from three of my tables is gone.SQL Profiler turns up nothing. If I try to access a problem table fromEnterprise manager while Access is open I get an ODBC error. If I try toaccess it after I close Access, the records are gone.Where do I start looking to figure out where the problem is? I'm at a lost.TIA for help.--Jake
View 4 Replies View RelatedI have two tables that have a column called "subscriberid". I imported rows into the main table, and it's sister table.
There are 90,000 rows in the main table and 94,021 in the other table.
It appears that roughly 4,000 rows have disappeared in the main table, but not in the other table, and I don't understand why?
I'm new to SQL Server 2005 Express and I'd appreciate any help you can give me.
Thanks,
Bill
Has anyone seen precedence constraints disappear in a package after closing and opening again? In this case, it's not package-wide. Only constraints inside one Foreach Loop container disappeared. Any idea what causes this to happen?
p.s: Yes, I did Save All. Most of these contraints were saved in the package for more than a week anyway.
I created a simple stored procedure shown below. It works wonderfully. The only problem is that it likes to disappear on me. I am accessing it through a VB.Net program. The system will work fine throughout the day and suddenly it will be gone. I can exit Sql Server Management Studio and come back in and it will still be there so that is not causing it. The database stays connected all the time.
Any suggestions?
Code Snippet
IF EXISTS(
SELECT *
FROM sys.procedures
WHERE name = N'VerifyPart'
)
DROP procedure VerifyPart;
--create a procedure for the part code tab verify part function
go
create procedure VerifyPart
(
@PartNumber varchar(50) = null,
@LastUpdated varchar(30) = null
)
as
--Update Part Number
update Parts
set LastUpdated = @LastUpdated
where PartNumber = @PartNumber
I'm not even sure where to post this, but has anyone had a problem with maintenance plans disappearing?
I mean the SSIS package and the job just disappearing....?
I have four servers. Two dev and two prod. I created a pretty simple maintenance plan to backup databases. There are four tasks in the plan. One for each of four databases. Backing each up to a separate file, all in the same folder.
The plan gets associated with a job that has it run daily, every six hours, with no end date.
The plan runs just fine. Then this morning, on one of the servers, the plan and its job are just gone.
This is the second time this has happened. And it's not the same server that it happened on the first time.
Why would a maintenance plan just disappear?
Anyone?
J
When I enter data into a SQL database and save it, the data that I have just added disapears, but when I close the applicaiton and re-open it, it's still there - is there any reason for this and any way to get it to stay?
Any ideas?