ODBC Data Source Failed Connection
Feb 13, 2008
I hope this is a fairly simple problem that I'm just missing. I've installed SQL Server 2005 Developer Edition on Windows XP Professional. I'm trying to create an ODBC data source under an ID I created ("InstallOwner") that is part of the administrators group. In the Wizard, I give it a name and default to the "local" server. I selected to authenticate the ID using SQL Server authentication. However when I enter the ID and Password, I get the following error.
"Connection Failed - SQL State=28000, SQL Server Error: 18456, [microsoft][SQL Native Client][SQL Server] Login Failed for user "InstallOwner". If I use the "sa" account, it works fine. Can someone point me in the right direction?
View 2 Replies
ADVERTISEMENT
Mar 2, 2007
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
View 2 Replies
View Related
Mar 6, 2006
I have created a stored procedure on the iSeries that creates a cursor and opens it. I am trying to write my report to use the stored procedure. I cannot get the data source to work. How do I create my data source so that it uses the stored procedure? My SP has three parameters I am trying to pass from the report. The parms are created in the layout.
Thank you
View 6 Replies
View Related
Mar 1, 2008
Hopefully there's an easy answer for this. I'm totally new to SQL server and I'm trying to upsize an Access database. Whether I use the upsizing wizard or try to create a data source through the ODBC Data Source Administrator, I get a connection failed error. It tells me the server does not exist or my login is incorrect. I'm using NT authentication to connect to the server on my local drive. I just installed the whole 2005 express edition and the only thing that came up during the install was that I didn't have IIS installed. I didn't see how that would be relevant, so I went ahead with the install.
Shouldn't this work with the default setup? I've searched around trying different "solutions" although I doubt they were specifically related to this very basic problem. I tried giving my login every right I could find through in the database engine properties in the server management studio, which connects fine itself with just my network login name and no password. What am I missing?
View 3 Replies
View Related
Dec 15, 2004
I create a Test database in SQL server, also I add new user in security folder. Also I add this user in Test database, the permission are: Public, and db_owner. But when I let the user try to open the database, it is ODBC – Connection failed. I add another user a few months ago, she works fine. But the new user I added in didn’t work, did you know why. I am sure I add the same permission as the later user. Thanks.
View 2 Replies
View Related
Aug 11, 2006
Running a database using sql server. User, rights, password set up on the server side and is functioning fine on the users normal desktop. But here is the problem. When the user goes to a different desktop they have never been on before and a new user profile is created on that desktop, they are unable to access the database. When using the front end (access), an odbc connection failure popup occurs when trying to retrieve data. The wierd part is that the odbc connection was set up under admin tools just like it is setup on the working desktop. Also the connection tests successfully. This leads me to believe that it is a desktop side problem and not server side. It is only a problem when a new user profile is setup on a desktop that the user has never been on before.
Any help would be appreciated.
Barry
View 5 Replies
View Related
Jun 18, 2015
I have installed SQL2014 on a server [hostname: sql2014]. Â I created an user "ABC" and even granted "system admin" server role. Â I tested login from the Management Studio in the local server and succeeded.Now I would like to create an ODBC connection from a IIS server to this SQL2014. When I tried create the system DSN with the user "ABC" by selecting the "With SQL Server authentication using a login ID and password entered by the user". Â It gave me the following error: Connection Failed:
SQLState: '28000'
SQL Server Error: 18456
[Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user 'ABC'.
From the sql server log file viewer, I found an event with the following:
Source: MSSQLSERVER
Category: (4)
Event: 18456
Computer: SQL2014
Message
Login failed for user 'ABC'. Reason: Could not find a login matching the name provided. [Client: 192.168.0.1]I can create the ODBC connection with the option "With Windows NT authentication using the network login ID". Â But for security reason, I need to use SQL server authentication.Here are some more information.Both SQL and IIS servers are running Windows 2012 DataCenter.I am using Mix mode authentication for the SQL server.I turned off firewall on both servers.I can ping each other successfully.I tried install the SQL server native client for SQL2012, but the error is just the same.
View 12 Replies
View Related
Mar 16, 2006
Hi,
I am trying to use the DataReader Source to import a table from a PostgresSQL database into a new table in SQL 2005 database. It works for all tables except one, which has over 80,000 records with long text columns. When I limit the import to fraction of records (3,000 to 4,000 records) it works fine but when I try to get all it generates the following errors:
Source: DataReader using ADO.NET and ODBC driver to access PostgresSQL table
Destination: OLE DB Destination - new table in SQL 2005
(BTW - successful import with DTS packagein SQL 2000)
---Errors
Error: 0x80070050 at Import File, DTS.Pipeline: The file exists.
Error: 0xC0048019 at Import File, DTS.Pipeline: The buffer manager could not get a temporary file name. The call to GetTempFileName failed.
Error: 0xC0048013 at Import File, DTS.Pipeline: The buffer manager could not create a temporary file on the path "C:Documents and SettingsmichaelshLocal SettingsTemp". The path will not be considered for temporary storage again.
Error: 0xC0047070 at Import File, DTS.Pipeline: The buffer manager cannot create a file to spool a long object on the directories named in the BLOBTempStoragePath property. Either an incorrect file name was provided, or there are no permissions.
Error: 0xC0209029 at Import File, DataReader Source - Articles [1]: The "component "DataReader Source - Articles" (1)" failed because error code 0x80004005 occurred, and the error row disposition on "output column "probsumm" (1639)" specifies failure on error. An error occurred on the specified object of the specified component.
Error: 0xC02090F5 at Import File, DataReader Source - Articles [1]: The component "DataReader Source - Articles" (1) was unable to process the data.
Error: 0xC0047038 at Import File, DTS.Pipeline: The PrimeOutput method on component "DataReader Source - Articles" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
---End
Any idea why it can't create a temp file or why it complains about the "The File exists", which file, where, etc. Any help or alternative suggestions are greatly appreciated. What I am missing or doing wrong here?
Best,
Michael Sh
View 11 Replies
View Related
Aug 11, 2004
We are using an Access 2002 front-end with SQL Server 2000 as the database.
There is a table (dbo_PrivateGroup) that if you try to open it in the table view, in a query, in a report, or through the application, you get the following Error message:
ODBC--connection to 'unlocking' failed.
Does anyone know what this means and how I am supposed to get around this?
I tried it on the actual server itself and I can read the table through Access, through the application when it is running, and through Enterprise Manager. This machine is logged in with "Administrator" as the user id.
The table is on a different database than the other tables in the application.
It is a user table. And I checked the permissions and all users have select, insert, and delete permissions allowed. However, when I go to look at the columns property, none are checked for any user and when I go to check the boxes for all columns, I hit Apply, then Close. When I go back into that screen for that given user, the columns weren't saved.
My database knowledge is creating tables, stored procedures, and triggers. They don't have a DBA here and my knowledge is limited. Is the problem in SQL Server or Access?
I don't know if any of this makes sense. But if it does, any help would be greatly appreciated.
Thanks.
View 2 Replies
View Related
Mar 24, 2007
I moved a sql 2000 database to a sql 2005 server. I have a front end in access 2003. I manually created an ODBC data source system DSN using the ODBC Data Source Administrator just like it was on the other server. I can connect fine but users are saying their getting an odbc call fail. I created the connection and relinked the tables to the new server with the moved database. I completed the same task with another database and the user can connect fine. What could be the problem?
View 1 Replies
View Related
Apr 21, 2008
Dear all,
I want to create an ODBC connection using windows authentication but it always failed. The error display that the database server not found. Is the any configuration I should set before create the ODBC ?
Thanks in advance.
Best regards,
Hery
View 5 Replies
View Related
Sep 22, 2004
i have msde 2000 running on a server i am able to create an odbc connection to my db on that pc. when i try to create anpther odbc connection on another pc on that network i get the following error:
sql state '01000'
server error 2
[microsoft][odbc sql server driver][named pipes] connectionopen (connect()).
connection failed
sql state '08001'
server error 17
[microsoft][odbc sql server driver][named pipes]server does not exist or access denied.
what do i have to do to get this odbc connection on this pc working?
Thank You,
Thomas
View 2 Replies
View Related
Mar 26, 2007
hello,
im trying to create an ODBC data source from a SQL SERVER 2005 database located in a remoted pc.
Client----------->PC1 : win 2000 sp4, not sql server
Remote server--->PC2 : win 2000 sp4, sql server 2005 express
From the Command Prompt, im typing "ping PC2" successfully.
After, in the ODBC datasource administrator-->System DNS tab, i choose "sql server" as a new data source , and in the server box , i'm typing PC2/SQLEXPRESS.
In the next steps, im typing the user-passwords.
The error :
connection failed
...
[microsoft][odbc sql server driver][named pipes]ConnectionOpen(CreateFile()).
Connection failed:
SQLState: '08001'
..
Client unable to establish connection
What goes wrong?
I follow the same steps locally, and everything is OK.
Sorry for my bad english:cool:
View 2 Replies
View Related
Dec 28, 2007
SQL State: '28000'
SQL Server Error: 18452
[Microsoft][ODBC SQL Server Driver][SQL Server] Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server Connection.
Another NT Account (Previously created account) has no problem to connect to the database, however a new NT Account assisged to a new DB role cannot login.
Any special rights required for the new NT Account (at NT or SQL database)?
View 1 Replies
View Related
Dec 8, 2007
Hi all,
I am new to SQL Server. I have some basic questions.
I have installed SQL Server Developer Edition on a Windows XP Media center edition. The installation is successful. Now I am trying to create an ODBC, but I there are some options which I am not quite sure about.
e.g.
1. How SQL Server verify the authenticity of the login ID?
A. Windows NT....
B. SQL Server....
Client Configuration:
Server alias: ???
Named Pipes: What should be the values of [pipe name]?
or should i choose other options?....
And I when I use Query Analyzer to connect to Server, the authentication fails..
Can some one point me to the right direction, or if there's some documentation on this subject, that would be very much appreciated.
Thanks in advance.
View 11 Replies
View Related
Jun 27, 2006
I'm trying to import tables from COBOL thru Relativity client. With SQL Server 2000, I used Other (ODBC Data Source) to do this. I cannot find a comparible data source in SQL Server 2005. What do I do?
View 15 Replies
View Related
May 2, 2006
I am new to SSIS packages and want to use an ODBC data source connected to an old Btrieve set of data files. I set up the ODBC DSN, and my SQL Server Data Connection, and can browse the tables in the Server Explorer. However with regards to my SSIS package, I'm not sure whether to use an OLE DB Source or Data Reader Source. I have futzed with both of them but haven't had any luck at seeing the tables. Can someone please give me some tips.
Thanks,
Carson
View 10 Replies
View Related
Jun 25, 2007
I am trying to use the ADO.NET bridge to connect to an old database on RISC6000 via an ODBC connection, but I receive an error.
So, I would use a script component to retrieve data directly from an ODBC connection, using a stored procedure.
Any sample code ?
Any idea ?
Thanks
View 1 Replies
View Related
Mar 18, 2007
A data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
EXEC sp_addlinkedserver
@server = 'server_name',
@srvproduct = '',
@provider = 'MSDASQL',
@datasrc = 'odbc_dsn_name'
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
Any assistance would be appreciated.
Thanks,
View 3 Replies
View Related
Jul 18, 2001
I'm trying to create an ODBC Data Source on both an NT 4.0 server and 2000 Professional workstation that are remote. I can not seem to get them to connect. What do I put in the server name field when creating the network library connection? I have tried both the ip address and fully qualified domain name of the sql server and neither worked.
Thanks in advance,
-Marty
View 1 Replies
View Related
Mar 7, 2006
HI EVERYONE...!!
I WANT TO CREATE A DATA FLOW SOURCE ON ODBC TO SQL BUT A CAN'T FIND THE ODBC DATA FLOW SOURCE. SOMEBODY CAN SAY ME HOW DO THIS????
THANKS...!!!
View 3 Replies
View Related
Mar 7, 2006
HI EVERYONE...!!
I WANT TO CREATE A DATA FLOW SOURCE ON ODBC TO SQL BUT A CAN'T FIND THE ODBC DATA FLOW SOURCE. SOMEBODY CAN SAY ME HOW DO THIS????
THANKS...!!!
View 1 Replies
View Related
Apr 20, 2006
As other contributors, all I am trying to do is import data from an ODBC source (spelled 'non-Microsoft data source') into a SQL 2005 table. I can easily do this in SQL 2000 with DTS, but when I use the same DSN in VS 2005 it doesn't work.
I created an integration project, and made a connection in Connection Manager to the DSN and clicked Test Connection. It succeeded, or so it claimed.
Click OK and drag a DataReader Source onto the Data Flow surface Doubleclick it and select the connection manager per above. Note the error: Error at Data Flow Task [DataReader Source[50]]: Cannot acquire a managed connection from the run-time connection manager.
What does that mean? More to the point, how to fix it?
View 7 Replies
View Related
Dec 31, 2005
Hi all,
My replication of those SQL 2000 servers gave errors: Data source (11): General Network Error. Check your network documentation... and ODBC (08S01): Communication link failure. The replication was across the WAN. I don't know where to start to troubleshoot this problem. Please help!
Thanks in advance.
John
View 12 Replies
View Related
Jan 22, 2007
I am running Microsoft SQL Server 2005 Express Edition, and I am having difficulties setting up an ODBC User Data Source to connect to the SQL server.
I have tried going through "Control Panel -> Administrative Tools -> Data Sources (ODBC)" to add a user data source. For the SQL Server to connect to, I have tried specifying "localhostSQLEXPRESS", "SQLEXPRESS", "(local)", etc. -- but nothing seems to work. When the DSN configuration wizard tries to connect to the SQL Server to obtain default settings, it fails with the error "SQL Server does not exist or access denied". (Same error occurs if I try connecting to this ODBC data source later.)
But I know that the SQL Server exists and I have been using it through the SQL Server data provider in another application.
I am new to this, so any help or pointers would be greatly appreciated.
Thanks,
Kumar
View 2 Replies
View Related
May 25, 1999
I have been using ODBC data source administrator for years without any problem. However, after a unsuccesful MSSQL7.0 installation, i keep getting
the following message:
"An error occurred while windows was working with the control panel file
D:WINNTSystem32Odbccp32.cpl"
Any insight into this would be greatly appreciated.
Thanks,
--Lawrence
View 1 Replies
View Related
Jun 3, 2002
We have more than 10 databases on the same server. When I try to set up ODBC connection through my desktop to a specific database (DB1) using SQL authentication, it acts weird:
-- I give the login (testkz) access to DB1, DB1 does not show up in the default database list; I tried to type in the database name, it is not taken
-- If I give 'testkz' access to two other databases (and only these two), even though I did not give access to DB1, DB1 together with some other databases show up on the default database list. Seems to me that there are some dependency among the dbs.
Does anybody have any issues like this?
Your input is appreciated.
View 3 Replies
View Related
Jul 16, 2013
I am trying to setup an ODBC data source for Access. The server I'm trying to connect to is 2008 R2. I have SQL Server Management Studio installed on the computer where I'm trying to make the ODBC Data Source from. I can connect the the remote 2008 server through Management Studio, but in the ODBC wizard I do the following:
"Machine Data Source" tab, click "New"
Select "User Data Source", click "Next >"
Select "SQL Server", click "Next >"
Click "Finish"
Name: remote
Description: remote
Server: type the server name ie "sql.somewhere.com"
[code]....
View 11 Replies
View Related
Jul 20, 2005
Is there a script anyone has that will automate the addition of anaccess database to the OBDC datasources in control panel.Thanks
View 1 Replies
View Related
Feb 7, 2007
Hi,
I am trying to import tables from an ODBC data source into an SQL Server 2005 database. I presume that one way to achieve this is to create an Integration Services package, via Business Intelligence Studio (I already used DTS in SQL Server 2000, but not Integration Services) ?
Or is there a simpler way ? For instance, is there an import wizard that woult include an ODBC Data source ?
Thanks i advance.
View 1 Replies
View Related
Feb 12, 2008
I'm attempting to use SSRS (2005) with my Oracle RDB database (old DEC RDB), using an ODBC driver. I am able to create a report, and view data, but I need to add some report parameters to filter the data. When I attempt to use parameters in the query, I either get a syntax error, or a message that my odbc connection cannot use "named" parameters, and that I should use "unnamed" parameters.
Here is a snippet of my sql query:
SELECT Application_Notes.Lease_Application, Application_Notes.Followup_Code,
<...>
FROM
Application_Notes Join
<...>
WHERE
(Application_Notes.Tickler_date >= {ts '2008-02-08 00:00:00'} AND
Application_Notes.Tickler_Date < {ts '2008-02-09 00:00:00'} )
The "Tickler_Date" field is a binary date field. The above syntax is pulled from a Crystal Report, which I am considering moving over to SSRS. Ideally, I would like the user to enter a single RunDate parameter, and have the query do the following:
Where (Application_Notes.Tickler_Date >= @RunDate and
Application_Notes.Tickler_Date < (@RunDate + 1 day) )
If the user has to enter two dates, that will be fine, but I can't seem to get past the errors.
Thanks,
Paul
View 6 Replies
View Related
Jul 28, 2006
Good morning all,
I have created this query in SQL Server 2005 which uses an MS SQL Server data source - I've tested it and it perfroms as it should:
SELECT DISTINCT
WIP.R0 AS [Job No], WIP_R23.R0 AS [Pack No], PlanningM2.R1 AS [Part No], WIP.R17 AS FKF, WIP2.R17 AS FKF2, SUBSTRING(PlanningM2.R0, 1, 3)
AS Ref, PlanningM2.R5 AS Qty, LTRIM(RTRIM(WIP_R23.R23)) AS Shortages, LEN(PlanningM2.R1) AS StrLen, Stock.R2 AS [Stock Qty],
WIP.R10 AS Status, WIP2.R10 AS [Pack Status], WIP.R15 AS [Qty UC]
FROM C001_UNIDATA_WIP_NF AS WIP INNER JOIN
C001_UNIDATA_PLANNINGM_NF AS PlanningM ON WIP.R0 = PlanningM.ASSY INNER JOIN
C001_UNIDATA_PLANNINGM_NF AS PlanningM2 ON PlanningM.R1 = PlanningM2.ASSY INNER JOIN
C001_UNIDATA_WIP_R23 AS WIP_R23 ON PlanningM.R1 = WIP_R23.R0 INNER JOIN
C001_UNIDATA_WIP_NF AS WIP2 ON WIP_R23.R0 = WIP2.R0 INNER JOIN
C001_UNIDATA_STOCK_NF AS Stock ON PlanningM2.R1 = Stock.R0
WHERE (WIP_R23.R23 IS NULL) AND (WIP.R0 LIKE N'%' + @RP1 + N'%') OR
(WIP.R0 LIKE N'%' + @RP1 + N'%') AND (PlanningM2.R1 = RIGHT(LTRIM(RTRIM(WIP_R23.R23)), LEN(PlanningM2.R1)))
ORDER BY [Job No], [Pack No]
I am now trying to recreate this query using ODBC and am having one helluva problem with it as it doesn't seem to like many of the functions I've used, such as LTRIM, RTRIM, LEN, RIGHT and won't accept the parameter I've included, or any other parameter come to think of it.
Has anyone else had a similar problem at all, and could you direct me to a solution if you have?
Thanks in advance,
Chris
View 5 Replies
View Related
May 3, 2006
I'm having an odd issue importing data from an ODBC source using a DataReader Source.
There's data in the source table, and if I use a non-SSIS tool to query the source, all the data is visible. However, if I use the SSIS DataReader source, It returns no rows, and throws no error.
Any ideas for figuring this one out? This is affecting about 10% of the tables from this data source, and it's our ERP application, so there's limits on what I can do to the source schemas.
Thanks!
View 1 Replies
View Related
