Hello,
I am trying to get the count of records in a file in a single round trip to the server. I tried T-SQL code similar to below and used SQLBindColumn to bind to argument #1. The code executes without error, but the result is never returned.
Any ideas what I am doing wrong?
Thanks!
CB
DECLARE @i AS INTEGER
SELECT @i COUNT (*) FROM A_4000.dbo.ADRE_ADU WITH (NOLOCK)
Hello,
I am using the following code to retrieve data from an AS400 datasource. I have already setup the DSN connection(TestDSN) which is working just fine and I am able to connect and look at the data by creating linked-table in MS Access.
SELECT a.* from OPENROWSET('MSDASQL', 'DSN=TestDSN', 'select * from mylibrary.mytable') as a
Now the problem is I need to browse the data from SQL server, but when I use the above TSQL I get the following error message.
OLE DB error trace [OLE/DB Provider 'MSDASQL' IDBInitialize::Initialize returned 0x80004005: The provider did not give any information about the error.].
Msg 7399, Level 16, State 1, Line 1
OLE DB provider 'MSDASQL' reported an error. The provider did not give any information about the error.
Anybody knows how to get this to work?
BTW, I tried MSDASQL provider to access a SQL server and it worked so it does not seem to be a problem with the driver registeration.
Thanks,
LOA
We have purchased an ERP system from a vendor which uses system DSN for all the reports. The system automatically creates DSN with Sa with SQL Server. The problem is the DSN is not working with AD users.
Active Directory server: Windows Server 2008 32 Bit.
SQL Server: Windows Server 2012 64 Bit. This server is already member of my Domain. e.g. CompDomain.com
What should I need to do in client PCs or Server to avail ODBC to AD users.
I am getting a failed error message with this code and i don't understand why.
DECLARE @YourTAble Table (AccountID INT)
Insert INTO @YourTable
SELECT 8003 UNION ALL
SELECT 8015 UNION ALL
SELECT 5033 UNION ALL
SELECT 5033 UNION ALL
SELECT 2115 UNION ALL
SELECT 2678
SELECT AccountID, Ranking =(SELECT COUNT(*) FROM @yourtable as YT WHERE YT.AccountID > @yourtable.AccountID)+ 1
FROM @YourTable
ORDER BY (SELECT COUNT(*) FROM @YourTable YT WHERE YT.AccountID > @YourTable.AccountID) + 1
Dallr
Does anyone know how I can use a user variable in a sqlcommand in a Datareader source with an ODBC connection as the source?
I am storing a date value in a user variable(Date) I fill with a SQL Task and then want to use the value in the sqlcommand I use in the Datareader Source. It won't let me use the @variablename in the sql command.
Can anyone help with some advice on how I can make this work?
Appreciate any help I can get.
Thank you
Hi,
I have an Execute Process Task that calls a batch file.
I need to pass in a date value to the batch file.
If I enter the value 20071018 in the "Arguments" section, it works fine.
However, I use the "Standard Input Variable", User::MyDate (which gets assigned in a previous Execute SQL Task), it bombs. The query I am using returns the date back in the format yyyymmdd. It gets assigned to a string variable, called MyDate.
e.g.)
SELECT TOP 1 CONVERT(VARCHAR, MyDate, 112) AS MyDate
FROM myTable
which result is mapped to User::MyDate
Is there any obvious reason why this doesn't work?
Thanks
I have a variable that is created dynamically that will be used as an input for a sql statement.
When I display the variable in a text box it looks like this:
(PROP_CLASS IN ('" & 100 & "','" & 101 & "' ))
The following works when I hard code the values into the SQL statement:
strSQL = "SELECT * FROM web_transfer WHERE (PROP_CLASS IN ('" & 100 & "','" & 101 & "' )) AND ........."But I get no values returned when I use the variable directly in the sql: strSQL = "SELECT * FROM web_transfer WHERE (PROP_CLASS IN (" & propertyClass & ")) AND ..........." The propertyClass variable is the text string “(PROP_CLASS IN ('" & 100 & "','" & 101 & "' ))“. How do I add this variable to the sql string so that it is recognized. I guess that it is adding some hidden characters. Any help please?? I am a newbie to this, s
Hi, I'm trying to run a stored proc:ALTER PROCEDURE dbo.UpdateXmlWF(@varWO varchar(50))ASDECLARE @varCust VARCHAR(50)SELECT @varCust=(SELECT Customer FROM tblWorkOrdersWHERE WorkOrder=@varWO)When I remove the SELECT @varCust= I get the correct return. With itin, it just appears to run but nothing comes up in the output window.PLEASE tell me where I'm going wrong. I'm using MSDE, although I don'tthink that should matter?Thanks, Kathy
View 2 Replies View RelatedI am trying to change variable value at run time in ssis 2012 package using DTEXECUI utility but can not see any changes happening in config file variable value and also data is not getting populated in my table as per new variable value.
What is the right syntax or method of dynamically changing variable value either through DTEXECUI or DTEXEC command prompt command.
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.51650
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated)
Version 11.0.50727.1 RTMREL
Microsoft .NET Framework
Version 4.5.50938
SQL Server Integration Services  Â
Microsoft SQL Server Integration Services Designer
Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for
XP. However, when I try to add a new data source through ODBC Connection
Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the
SQL Native Client to not show up in the list of available ODBC data sources?
Hi all,I am having trouble getting linked Oracle 9 server in MS SQL Server2005 Express to work properly. My machine is running Windows XP.The Microsoft and Oracle OLE DB Providers have problems dealing withOracle's Numeric Data Type, so I decided to use Microsoft's OLE DB forODBC Provider and an Oracle ODBC source. When using the Microsoft ODBCfor Oracle Driver in my ODBC source I have inconsistent behavior.Sometimes my queries are processed properly, then other times I get thefollowing errorOLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "ODBCBEAST".I have no idea why sometimes I can connect to the linked server with noproblems andwhy other times it performs like this. I'm not changing anything aboutthe system I can think of. When I use an Oracle client (PL/SQL) I haveabsolutely no problems connecting. TNSPING returns that the connectionis good.This is unacceptable so I decided to try my luck with the Oracle 10gODBC driver. However when I use this and perform an openquery selectagainst the linked server I get back only 11 rows, when I know that thedatabase has over 100 rows (in fact when using the Microsoft ODBCdriver and it works that's what I get). I figured maybe the buffersetting needed to be raised in the ODBC configuration so I took it from64000 to 600000 (a magnitude of 10) but I still get back only 11 rows.I'm at my wit's end.Any suggestions on resolving one or the other problem would be muchappreciated.Thanks much
View 2 Replies View Relatedhi
I had a view in which I did something like this
isnull(fld,val) as 'alias'
when I assign a value to this in the client (vb 6.0) it works ok in sql2000 but fails in 2005.
When I change the query to fld as 'alias' then it works ok in sql 2005 .
why ?? I still have sql 2000 (8.0) compatability.
Also some queries which are pretty badly written run on sql 2000 but dont run at all in sql 2005 ???
any clues or answers ?? it is some configuration issue ?
Thanks in advance.
Hi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
I am writing a pgm that attaches to a SQL Server database. I have an Add stored procedure and an Update stored procedure. The two are almost identical, except for a couple parameters. However, the Add function works and the Update does not. Can anyone see why? I can't seem to find what the problem is...
This was my test:
Dim cmd As New SqlCommand("pContact_Update", cn)
'Dim cmd As New SqlCommand("pContact_Add", cn)
Try
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@UserId", SqlDbType.VarChar).Value = UserId
cmd.Parameters.Add("@FirstName", SqlDbType.VarChar).Value = TextBox1.Text
[...etc more parameters...]
cmd.Parameters.Add("@Id", SqlDbType.VarChar).Value = ContactId
cn.Open()
cmd.ExecuteNonQuery()
Label1.Text = "done"
cn.Close()
Catch ex As Exception
Label1.Text = ex.Message
End Try
When I use the Add procedure, a record is added correctly and I receive the "done" message. When I use the Update procedure, the record is not updated, but I still receive the "done" message.
I have looked at the stored procedures and the syntax is correct according to SQL Server.
Please I would appreciate any advice...
I'm working on an SSIS package that uses a vb.net script to grab some XML from a webservice (I'd explain why I'm not using a web service task here, but I'd just get angry), and I wish to then assign the XML string to a package variable which then gets sent along to a DataFlow Task that contains an XML Source that points at said variable. when I copy the XML string into the variable value in the script, if do a quickwatch on the variable (as in Dts.Variable("MyXML").value) it looks as though the new value has been copied to the variable, but when I step out of that task and look at the package explorer the variable is its original value.
I think the problem is that the dataflow XML source has a lock on the variable and so the script task isn't affecting it. Does anyone have any experience with this kind of problem, or know a workaround?
I have a SQL Task that updates running totals on a record inserted using a Data Flow Task. The package runs without error, but the actual row does not calculate the running totals. I suspect that the inserted record is not committed until the package completes and the SQL Task is seeing the previous record as the current. Here is the code in the SQL Task:
DECLARE @DV INT;
SET @DV = (SELECT MAX(DateValue) FROM tblTG);
DECLARE @PV INT;
SET @PV = @DV - 1;
I've not been successful in passing a SSIS global variable to a declared parameter, but is it possible to do this:
DECLARE @DV INT;
SET @DV = ?;
DECLARE @PV INT;
SET @PV = @DV - 1;
I have almost 50 references to these parameters in the query so a substitution would be helpful.
Dan
I'm new to SSIS, but have been programming in SQL and ASP.Net for several years. In Visual Studio 2005 Team Edition I've created an SSIS that imports data from a flat file into the database. The original process worked, but did not check the creation date of the import file. I've been asked to add logic that will check that date and verify that it's more recent than a value stored in the database before the import process executes.
Here are the task steps.
[Execute SQL Task] - Run a stored procedure that checks to see if the import is running. If so, stop execution. Otherwise, proceed to the next step.
[Execute SQL Task] - Log an entry to a table indicating that the import has started.
[Script Task] - Get the create date for the current flat file via the reference provided in the file connection manager. Assign that date to a global value (FileCreateDate) and pass it to the next step. This works.
[Execute SQL Task] - Compare this file date with the last file create date in the database. This is where the process breaks. This step depends on 2 variables defined at a global level. The first is FileCreateDate, which gets set in step 3. The second is a global variable named IsNewFile. That variable needs to be set in this step based on what the stored procedure this step calls finds out on the database. Precedence constraints direct behavior to the next proper node according to the TRUE/FALSE setting of IsNewFile.
If IsNewFile is FALSE, direct the process to a step that enters a log entry to a table and conclude execution of the SSIS.
If IsNewFile is TRUE, proceed with the import. There are 5 other subsequent steps that follow this decision, but since those work they are not relevant to this post.
Here is the stored procedure that Step 4 is calling. You can see that I experimented with using and not using the OUTPUT option. I really don't care if it returns the value as an OUTPUT or as a field in a recordset. All I care about is getting that value back from the stored procedure so this node in the decision tree can point the flow in the correct direction.
CREATE PROCEDURE [dbo].[p_CheckImportFileCreateDate]
/*
The SSIS package passes the FileCreateDate parameter to this procedure, which then compares that parameter with the date saved in tbl_ImportFileCreateDate.
If the date is newer (or if there is no date), it updates the field in that table and returns a TRUE IsNewFile bit value in a recordset.
Otherwise it returns a FALSE value in the IsNewFile column.
Example:
exec p_CheckImportFileCreateDate 'GL Account Import', '2/27/2008 9:24 AM', 0
*/
@ProcessName varchar(50)
, @FileCreateDate datetime
, @IsNewFile bit OUTPUT
AS
SET NOCOUNT ON
--DECLARE @IsNewFile bit
DECLARE @CreateDateInTable datetime
SELECT @CreateDateInTable = FileCreateDate FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName
IF EXISTS (SELECT ProcessName FROM tbl_ImportFileCreateDate WHERE ProcessName = @ProcessName)
BEGIN
-- The process exists in tbl_ImportFileCreateDate. Compare the create dates.
IF (@FileCreateDate > @CreateDateInTable)
BEGIN
-- This is a newer file date. Update the table and set @IsNewFile to TRUE.
UPDATE tbl_ImportFileCreateDate
SET FileCreateDate = @FileCreateDate
WHERE ProcessName = @ProcessName
SET @IsNewFile = 1
END
ELSE
BEGIN
-- The file date is the same or older.
SET @IsNewFile = 0
END
END
ELSE
BEGIN
-- This is a new process for tbl_ImportFileCreateDate. Add a record to that table and set @IsNewFile to TRUE.
INSERT INTO tbl_ImportFileCreateDate (ProcessName, FileCreateDate)
VALUES (@ProcessName, @FileCreateDate)
SET @IsNewFile = 1
END
SELECT @IsNewFile
The relevant Global Variables in the package are defined as follows:
Name : Scope : Date Type : Value
FileCreateDate : (Package Name) : DateType : 1/1/2000
IsNewFile : (Package Name) : Boolean : False
Setting the properties in the "Execute SQL Task Editor" has been the difficult part of this. Here are the settings.
General
Name = Compare Last File Create Date
Description = Compares the create date of the current file with a value in tbl_ImportFileCreateDate.
TimeOut = 0
CodePage = 1252
ResultSet = None
ConnectionType = OLE DB
Connection = MyServerDataBase
SQLSourceType = Direct input
IsQueryStoredProcedure = False
BypassPrepare = True
I tried several SQL statements, suspecting it's a syntax issue. All of these failed, but with different error messages. These are the 2 most recent attempts based on posts I was able to locate.
SQLStatement = exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
SQLStatement = exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
Parameter Mapping
Variable Name = User::FileCreateDate, Direction = Input, DataType = DATE, Parameter Name = 0, Parameter Size = -1
Variable Name = User::IsNewFile, Direction = Output, DataType = BYTE, Parameter Name = 1, Parameter Size = -1
Result Set is empty.
Expressions is empty.
When I run this in debug mode with this SQL statement ...
exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the following error message appears.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec ? = dbo.p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "No value given for one or more required parameters.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
When the above is run tbl_ImportFileCreateDate does not get updated, so it's failing at some point when calling the procedure.
When I run this in debug mode with this SQL statement ...
exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output
... the tbl_ImportFileCreateDate table gets updated. So I know that data piece is working, but then it fails with the following message.
SSIS package "MyPackage.dtsx" starting.
Information: 0x4004300A at Import data from flat file to tbl_GLImport, DTS.Pipeline: Validation phase is beginning.
Error: 0xC001F009 at GLImport: The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
Error: 0xC002F210 at Compare Last File Create Date, Execute SQL Task: Executing the query "exec p_CheckImportFileCreateDate 'GL Account Import', ?, ? output" failed with the following error: "The type of the value being assigned to variable "User::IsNewFile" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object.
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Compare Last File Create Date
Warning: 0x80019002 at GLImport: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "MyPackage.dtsx" finished: Failure.
The IsNewFile global variable is scoped at the package level and has a Boolean data type, and the Output parameter in the stored procedure is defined as a Bit. So what gives?
The "Possible Failure Reasons" message is so generic that it's been useless to me. And I've been unable to find any examples online that explain how to do what I'm attempting. This would seem to be a very common task. My suspicion is that one or more of the settings in that Execute SQL Task node is bad. Or that there is some cryptic, undocumented reason that this is failing.
Thanks for your help.
I am in the middle of taking course 2073B €“ Programming a Microsoft SQL Server 2000 Database. I noticed that in Module9: Implementing User-Defined Functions exercise 2, page 25; step 2 is not returning the correct answer.
Select employeeid,name,title,mgremployeeid from dbo.fn_findreports(2)
It returns manager id for both 2 and 5 and I think it should just return the results only for manager id 2. The query results for step 1 is correct but not for step 2.
Somewhere in the code I think it should compare the inemployeeid with the previous inemployeeid, and then add a counter. If the two inemployeeid are not the same then reset the counter. Then maybe add an if statement or a case statement. Can you help with the logic? Thanks!
Here is the code of the function in the book:
/*
** fn_FindReports.sql
**
** This multi-statement table-valued user-defined
** function takes an EmplyeeID number as its parameter
** and provides information about all employees who
** report to that person.
*/
USE ClassNorthwind
GO
/*
** As a multi-statement table-valued user-defined
** function it starts with the function name,
** input parameter definition and defines the output
** table.
*/
CREATE FUNCTION fn_FindReports (@InEmployeeID char(5))
RETURNS @reports TABLE
(EmployeeID char(5) PRIMARY KEY,
Name nvarchar(40) NOT NULL,
Title nvarchar(30),
MgrEmployeeID int,
processed tinyint default 0)
-- Returns a result set that lists all the employees who
-- report to a given employee directly or indirectly
AS
BEGIN
DECLARE @RowsAdded int
-- Initialize @reports with direct reports of the given employee
INSERT @reports
SELECT EmployeeID, Name = FirstName + ' ' + LastName, Title, ReportsTo, 0
FROM EMPLOYEES
WHERE ReportsTo = @InEmployeeID
SET @RowsAdded = @@rowcount
-- While new employees were added in the previous iteration
WHILE @RowsAdded > 0
BEGIN
-- Mark all employee records whose direct reports are going to be
-- found in this iteration
UPDATE @reports
SET processed = 1
WHERE processed = 0
-- Insert employees who report to employees marked 1
INSERT @reports
SELECT e.EmployeeID, Name = FirstName + ' ' + LastName , e.Title, e.ReportsTo, 0
FROM employees e, @reports r
WHERE e.ReportsTo = r.EmployeeID
AND r.processed = 1
SET @RowsAdded = @@rowcount
-- Mark all employee records whose direct reports have been
-- found in this iteration
UPDATE @reports
SET processed = 2
WHERE processed = 1
END
RETURN -- Provides the value of @reports as the result
END
GO
Hi
View 7 Replies View RelatedI keep getting this debug error, see my code below, I have gone thru it time and time agian and do not see where the problem is. I have checked and have no NULL values that I'm trying to write back.
~~~~~~~~~~~
Error:
System.NullReferenceException was unhandled by user code Message="Object variable or With block variable not set." Source="Microsoft.VisualBasic"
~~~~~~~~~~~~
My Code
Dim DBConn As SqlConnection
Dim DBAdd As New SqlCommand
Dim strConnect As String = ConfigurationManager.ConnectionStrings("ProtoCostConnectionString").ConnectionString
DBConn = New SqlConnection(strConnect)
DBAdd.CommandText = "INSERT INTO D12_MIS (" _
& "CSJ, EST_DATE, RECORD_LOCK_FLAG, EST_CREATE_BY_NAME, EST_REVIEW_BY_NAME, m2_1, m2_2_date, m2_3_date, m2_4_date, m2_5, m3_1a, m3_1b, m3_2a, m3_2b, m3_3a, m3_3b" _
& ") values (" _
& "'" & Replace(vbCSJ.Text, "'", "''") _
& "', " _
& "'" & Replace(tmp1Date, "'", "''") _
& "', " _
& "'" & Replace(tmpRecordLock, "'", "''") _
& "', " _
& "'" & Replace(CheckedCreator, "'", "''") _
& "', " _
& "'" & Replace(CheckedReviewer, "'", "''") _
& "', " _
& "'" & Replace(vb2_1, "'", "''") _
& "', " _
& "'" & Replace(tmp2Date, "'", "''") _
& "', " _
& "'" & Replace(tmp3Date, "'", "''") _
& "', " _
& "'" & Replace(tmp4Date, "'", "''") _
& "', " _
& "'" & Replace(vb2_5, "'", "''") _
& "', " _
& "'" & Replace(vb3_1a, "'", "''") _
& "', " _
& "'" & Replace(vb3_1b, "'", "''") _
& "', " _
& "'" & Replace(vb3_2a, "'", "''") _
& "', " _
& "'" & Replace(vb3_2b, "'", "''") _
& "', " _
& "'" & Replace(vb3_3a, "'", "''") _
& "', " _
& "'" & Replace(vb3_3b, "'", "''") _
& "')"
DBAdd.Connection = DBConn
DBAdd.Connection.Open()
DBAdd.ExecuteNonQuery()
DBAdd.Connection.Close()
CREATE TABLE #T(branchnumber VARCHAR(4000))
insert into #t(branchnumber) values (005)
insert into #t(branchnumber) values (090)
insert into #t(branchnumber) values (115)
insert into #t(branchnumber) values (210)
insert into #t(branchnumber) values (216)
[code]....
I have a parameter which should take multiple values into it and pass that to the code that i use. For, this i created a parameter and temporarily for testing i am passing some values into it.Using a dynamic SQL i am converting multiple values into multiple records as rows into another variable (called @QUERY). My question is, how to insert the values from variable into a table (table variable or temp table or CTE).OR Is there any way to parse the multiple values into a table. like if we pass multiple values into a parameter. those should go into a table as rows.
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
Hello,
I run the DTS to copy data from Progress to SQL Server. How can match/convert the date variables to check.
The field p-date as format 'mm-dd-year' . It has the value of 10/09/2001.
The field s-date as varchar format. It has the value 2001-10-09.
How can use the where condition ( Select ...... WHERE p-date = s-date.)
Thanks
When trying to upsize an access database to sql server using the upsize wizard, I get the following error:
"Object variable or With block variable not set."
Any assistance is greatly appreciated.
Hello!
I'm using SQL Server 2000.
I have a variable which contains the name of another variable scoped in my stored procedure. I need to get the value of that other variable, namely:
DECLARE @operation VARCHAR(3)
DECLARE @parameterValue VARCHAR(50)
SELECT @operation='DIS'
CREATE table #myTable(value VARCHAR(20))
INSERT into #myTable values('@operation')
SELECT top 1 @parameterValue = value from #myTable
-- Now @parameterValue is assigned the string '@operation'
-- Here I need some way to retrieve the value of the @operation variable I declared before (in fact
-- another process writes into the table I retrieved the value from), in this case 'DIS'
DROP TABLE #myTable
I've tried several ways, but didn't succeed yet!
Please tell me there's a way to solve my problem!!!
Thank you very much in advance!
I have an SSIS package that creates a csv file based on a execute sql task.
The sql is incredibly simple select singlecolumn from table.
In the properties of the execute sql task I specify the result set as "full result set" when I run it I get the error that: Error:
The type of the value being assigned to variable "User::CSVoutput" differs from the current variable type.
Variables may not change type during execution. Variable types are strict, except for variables of type Object.
If I change the resultset to single row then I only get the first row from the DB (same if I choose none), If I choose XML then I get the error that the result is not xml. What resultset type do I need to choose in order to get all the rows into the CSV? The variable I am populating is of type string and is User::CSVoutput
While I was processing the cubes, error "Object Variable Or With Block Variable Not Set" prompt out,
what does it mean ?
Please help !!!
Is there any way to use a 2 dimensional array of strings as the Variable Enumerator for the "Foreach From Variable Enumerator". I am trying to copy a collection of files from folder A to folder B. In a script, I would populate, let us say, an array of (2,10), for 10 files, with one column representing the source file and other column representing the target column task. Then I would like to set this string array variable as the "Variable Enumerator" for the "Foreach From Variable Enumerator" and use file system tasks in the foreach loop to perform the tasks. The problem is that the "Foreach From Variable Enumerator" does not let me choose an index, but passes only one index 0, so, I will only be able to pass just one column. How do I let the foreach enumerator let me choose an index. The other foreach enumerators, foreach item and ADO give me the option to select index. I would like the same functionality in the foreach variable.
Note: I cannot use the "For Each File" enumerator, since the files are to be selected by a script only.
Thanks for the help.
I am trying to set a vaiable from a select statement
DECLARE @VALUE_KEEP NVARCHAR(120),
@COLUMN_NAME NVARCHAR(120)
SET @COLUMN_NAME = (SELECT COLUMN_NAME FROM INFORMATION_SCHEMA.COLUMNS WHERE TABLE_NAME = 'CONTACTS' AND COLUMN_NAME = 'FIRSTNAME')
SET @VALUE_KEEP = (SELECT @COLUMN_NAME FROM CONTACTS WHERE CONTACT_ID = 3)
PRINT @VALUE_KEEP
PRINT @COLUMN_NAME
RESULTS
-------------------------------------------------------------------------------------------
FirstName <-----------@VALUE_KEEP
FirstName <-----------@COLUMN_NAME
SELECT @COLUMN_NAME FROM CONTACTS returns: FirstName
SELECT FirstName from Contacts returns: Brent
How do I make this select statement work using the @COLUMN_NAME variable?
Any help greatly appreciated!
I've got two Sql Tasks on my dtsx. The first one loads a value into "Proyecto" user variable and the second one executes a variable named "SegundoProceso" which contains from the beginning:
"select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""
As SqlSourceType propety I have "Variable" and inside ResultSet or Parameter Mapping nodes there is nothing.
[Execute SQL Task] Error: Executing the query ""select Fecha from LogsCargaExcel where Proyecto = " + @[User::Proyecto] +""" failed with the following error: "Cannot use empty object or column names. Use a single space if necessary.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Where am I wrong?
TIA
Hi,
I have an Execute SQL Task (OLE DB Connnection Manager) with a SQL script in it. In this script I use several SQL variables (@my_variable). I would like to assign an IS variable ([User::My_Variable]) to one of my SQL variables on this script. Example:
DECLARE @my_variable int
, <several_others>
SET @my_variable = ?
<do_some_stuff>
Of course, I also set up the parameter mapping.
However, it seems this is not possible. Assigning a variable using a ? only seems to work in simple T-SQL statements.
I have several reasons for wanting to do this:
- the script uses several variables, several times. Not all SQL variables are assigned via IS variables.
- For reading and mainenance purposes, I prefer to pass the variable only once. Otherwise every time the script changes u need to keep track of all questionmarks and their order.
- Passing the variable once also makes it easier to design the script outside IS using Management Studio.
- This script only does preparation for the actual ETL, so I prefer to keep it in one task instead of taking it apart to several consecutive Execute SQL Tasks.
- I prefer to use the OLE DB connection manager because it's a de facto standard here.
Could anyone help me out with the following questions:
- Is the above possible?
- If so, how?
- If not, why not?
- If not, what would be the best way around this problem?
Thanx in advance,
Pipo