ODBC--call Failed Error
Feb 5, 2007
Hi!
It has been weeks now that I have been trying to fix an error that I
encounter everytime it gets to the code at runtime:
SQLStmt = "SELECT Sum([Quantity in Stock]) As TotalInStock,
Sum([Cost] * [Quantity in Stock]) AS TotalCost " & _
"FROM [Inventory Products] WHERE [Item
Number] = '" & ItemNum & "'"
Set InvP = CurDB.OpenRecordset(SQLStmt, DB_OPEN_DYNASET) '
==>it gets the error here
I tried also to implement the same code using ADODB but still go the same
error: "ODBC--call failed".
There are other events where similar code is executed without any problems
at all.
Any guidance would be helpful.
Thanks
View 2 Replies
ADVERTISEMENT
Feb 9, 2006
Hi All,
I have a database with primary and Unique key contraints on SQL Server 2000. I'm front ending it with Access 2k.
I want to trap the error when the Unique key constraint is hit, but i can't capture the error number. All attempts return error 0.
The error i get is
[Microsoft][ODBC SQL Server Driver][SQL Server]Violation of UNIQUE KEY constraint 'IX_lut_Referral_Source'. Cannot insert duplicate key in object 'lut_Referral_Source'. (#2627)[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated. (#3621)
I've tried the soultion given here http://support.microsoft.com/kb/q185384 but now get a Type mismatch error on errStored
SaveRecODBCErr:
' The function failed because of an ODBC error.
' Below are a list of some of the known error numbers.
' If you are not receiving an error in this list,
' add that error to the Select Case statement.
For Each errStored In DBEngine.Errors
Thanks for your help
View 1 Replies
View Related
Jul 5, 2006
Hello all.
Please excuse my lack of poper terminology when describing my issue to you, as I am very new to databases.
I have set up a SQL Server database which connects via MS Access. The application works fine, except when trying to connect through VPN.
Through System DSN, I changed the server name (FSERVER) to the server IP address, and test completed successfully. I am also able to ping the server when connected via VPN. However, when I try to start the application, I receive the following error after several seconds:
ODBC-- call failed.
That's it. No other information about the error. I read somewhere to make sure the MDAC versions are the same, which they are.
As I say, I am quite new to this, but would really appreciate any guidance to help me through.
Thanks in advance!
Nils
View 3 Replies
View Related
Mar 10, 2008
Hello all,
I have a problem which I can't seem to understand what is the cause. Please help!!!
I have this access which run under oracle 10g. Here is the code (below) that I always get error in. When I got into this error, I go to Control Panel -> Administrative Tools-> Data Sources (ODBC) then I choose on acc (microsoft Access Driver (*.mdb)) and click Configure. I select the access and click repair. It get through and I thought that I solve the error, but every time that I close and open the access when try to run, I receive the same error again. If I goes to the same process, click repair. It work, but I have to do it every time that I close and re-open the access. Does anyone know how to make it default so that I don't have to go the same process every time. Thank you.
Run-time error '-2147467259 (80004005)':
ODBC -- call failed.
Code Snippet
Dim White As Object
Set White = CreateObject("APToolkit.Object")
White.openoutputfile "C:White_" & controlno & ".pdf"
White.openinputfile "C:White.pdf"
White.setmasterquery "DSN=acc", "", "", "-1", "select e.*, f.* from prod_test e, stc f where e.control_number=" & controlno
White.addrelatedquery "DSN=acc", "", "", "-1", "select *, PROD_items.TOT & ' (kgs)' as TOT, CDbl([qty]/300)*CDbl([price]) as PRICE from PROD_ITEMS where control_number=" & controlno & "", "True"
White.setdbmultirowseparator ""
White.doformformatting = True
White.SetDefaultDBMergeFlag -998
White.FlattenRemainingFormFields = True
White.dbtoform False
White.resetformfields
White.closeoutputfile
Set White= Nothing
View 13 Replies
View Related
Mar 24, 2007
I moved a sql 2000 database to a sql 2005 server. I have a front end in access 2003. I manually created an ODBC data source system DSN using the ODBC Data Source Administrator just like it was on the other server. I can connect fine but users are saying their getting an odbc call fail. I created the connection and relinked the tables to the new server with the moved database. I completed the same task with another database and the user can connect fine. What could be the problem?
View 1 Replies
View Related
Sep 15, 2006
We have this fairly simple Access database with a link table to a view in an SQL Server. The Select Query in Access is a simple select from this view with a view criteria set. Nothing fancy. What is driving is moderately crazy is that this Select Query in Access seems to work fine for months and than all of a sudden (same query performed around the same time with about the same workload on the SQL-Server) it responses with the helpful "ODBC-Call Failed" message. Closing the Access database, taking a coffee, coming back againg and try the exact same Select Query normally works, no "ODBC-Call Failed" message.
It not happens always, mosty we're fine.
When it happens it happens for all subsequent queries tried. We have to close and reopen the Access database and pray to the good Lord that it works.
We would be very interested in someone with a solution to this problem.
View 20 Replies
View Related
Nov 14, 2007
I am having an issue that i can't seem to resolve. By no means am I an expert with odbc connections and what not but any help would be great.
here is my issue. I have a 64 Bit terminal server that is running MS Access. I have defined my DSN within the 32 bit admin utility and it connects without a problem As soon as i try to link tables and make a connection to the database from within Access i recieve an "ODBC CALL FAILED" message.
I enabled tracing and here is what i got.....this doesn't mean anything to me but hopefully it does to someone.....
PaintJobShip_Ma 1388-ecc ENTER SQLAllocEnv
HENV * 002DB3C4
PaintJobShip_Ma 1388-ecc EXIT SQLAllocEnv with return code 0 (SQL_SUCCESS)
HENV * 0x002DB3C4 ( 0x07f42538)
PaintJobShip_Ma 1388-ecc ENTER SQLAllocConnect
HENV 07F42538
HDBC * 002DB4D4
PaintJobShip_Ma 1388-ecc EXIT SQLAllocConnect with return code 0 (SQL_SUCCESS)
HENV 07F42538
HDBC * 0x002DB4D4 ( 0x07f425e0)
PaintJobShip_Ma 1388-ecc ENTER SQLSetConnectOption
HDBC 07F425E0
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014
PaintJobShip_Ma 1388-ecc EXIT SQLSetConnectOption with return code 0 (SQL_SUCCESS)
HDBC 07F425E0
SQLINTEGER 103 <SQL_LOGIN_TIMEOUT>
SQLPOINTER 0x00000014 (BADMEM)
PaintJobShip_Ma 1388-ecc ENTER SQLSetConnectAttrW
SQLHDBC 07F425E0
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
PaintJobShip_Ma 1388-ecc EXIT SQLSetConnectAttrW with return code 0 (SQL_SUCCESS)
SQLHDBC 07F425E0
SQLINTEGER 30002 <unknown>
SQLPOINTER [Unknown attribute 30002]
SQLINTEGER -3
PaintJobShip_Ma 1388-ecc ENTER SQLDriverConnectW
HDBC 07F425E0
HWND 000800D4
WCHAR * 0x4BF78088 [ -3] "****** 0"
SWORD -3
WCHAR * 0x4BF78088
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
PaintJobShip_Ma 1388-ecc EXIT SQLDriverConnectW with return code -1 (SQL_ERROR)
HDBC 07F425E0
HWND 000800D4
WCHAR * 0x4BF78088 [ -3] "****** 0"
SWORD -3
WCHAR * 0x4BF78088
SWORD 2
SWORD * 0x00000000
UWORD 1 <SQL_DRIVER_COMPLETE>
DIAG [S1000] [Oracle][ODBC][Ora]ORA-06413: Connection not open.
(6413)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
DIAG [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (0)
PaintJobShip_Ma 1388-ecc ENTER SQLErrorW
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC
WCHAR * 0x036A4458
SWORD 4095
SWORD * 0x002DB3C8
PaintJobShip_Ma 1388-ecc EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC (6413)
WCHAR * 0x036A4458 [ 102] "[Oracle][ODBC][Ora]ORA-06413: Connection not open. a 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0"
SWORD 4095
SWORD * 0x002DB3C8 (102)
PaintJobShip_Ma 1388-ecc ENTER SQLErrorW
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC
WCHAR * 0x036A44D6
SWORD 4032
SWORD * 0x002DB3C8
PaintJobShip_Ma 1388-ecc EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC (0)
WCHAR * 0x036A44D6 [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 4032
SWORD * 0x002DB3C8 (66)
PaintJobShip_Ma 1388-ecc ENTER SQLErrorW
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC
WCHAR * 0x036A456C
SWORD 3957
SWORD * 0x002DB3C8
PaintJobShip_Ma 1388-ecc EXIT SQLErrorW with return code 0 (SQL_SUCCESS)
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC (0)
WCHAR * 0x036A456C [ 66] "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed"
SWORD 3957
SWORD * 0x002DB3C8 (66)
PaintJobShip_Ma 1388-ecc ENTER SQLErrorW
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC
WCHAR * 0x036A4602
SWORD 3882
SWORD * 0x002DB3C8
PaintJobShip_Ma 1388-ecc EXIT SQLErrorW with return code 100 (SQL_NO_DATA_FOUND)
HENV 07F42538
HDBC 07F425E0
HSTMT 00000000
WCHAR * 0x002DB390 (NYI)
SDWORD * 0x002DB3DC
WCHAR * 0x036A4602
SWORD 3882
SWORD * 0x002DB3C8
PaintJobShip_Ma 1388-ecc ENTER SQLFreeConnect
HDBC 07F425E0
PaintJobShip_Ma 1388-ecc EXIT SQLFreeConnect with return code 0 (SQL_SUCCESS)
HDBC 07F425E0
any help would be great....thanks.
View 3 Replies
View Related
Mar 21, 2007
Hi Everyone,
I am fairly new to MS-SQL so excuse my ignorance if I have any.
I am trying to add and link a new table to an existing database. I can add the database and colums and add some data into it, and even run a query on it. However, if I try to run a query using the new table and and existing table (linked) I get the following error:
ODBC--call failed.
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot resolve collation conflict for equal to operation. (#446)
Any ideas?
my Server and SQL specs: SBS2003 & MSSQL ver 8.0
View 6 Replies
View Related
May 1, 2008
Hi
Wrote this snipet of code to use Insert Into. I have an ODBC connection to Oracle with the Tables linked. I can edit, add write querries and do everything I need to do except do an Insert Into. So I am thinking it is my code and seeking guidance.
I select add data from a button on the form. It then calls the code below. I know it is making it up to the db.execute statement and failing at that point. Funny thing is I only get the error "ODBC Call Failed" and no other snippets of information. On top of that I can not relink to the tables as they are now unaccessible and I have to completely close down the program and restart. Any help/assistance will be greatly appreciated. Thank you, Here is the code:
Code Start:
Private Sub btn_add_rca_record_Click()
On Error GoTo Err_btn_add_rca_record_Click
Dim db As Database
Dim rsCust As Recordset
Dim strSQL As String
Dim nbrRcaTicketId As Long
Set db = CurrentDb
nbrRcaTicketId = (100 + (DCount("*", "RCA_TABLE")))
strSQL = "Select * from RCA_TABLE "
Set rsCust = db.OpenRecordset(strSQL, DB_OPEN_DYNASET)
MsgBox "start of sql string"
strSQL = "INSERT INTO RCA_TABLE "
strSQL = strSQL & "( RCA_TICKET_ID, REPORT_AUTHOR_STAFF_ID, REPORT_START_DATE, REPORT_CLOSE_DATE, REPORTS_PARTICIPANTS_REVIEW, "
strSQL = strSQL & " INCIDENT_TICKET_NUMBER,INCIDENT_SEVERITY_LEVEL,INCIDENT_START_DATE_EVENT,INCIDENT_START_TIME_EVENT,INCIDENT_TIME_SERVICE_DOWN,INCIDENT_END_DATE_EVENT,INCIDENT_TIME_SERVICE_UP,INCIDENT_TIME_UP_TO_CUSTOMER,INCIDENT_OUTAGE_DURATION,INCIDENT_DETECTION_METHOD,INCIDENT_DISCOVERED_BY,INCIDENT_RESP_GROUP,INCIDENT_OWNER,INCIDENT_PRODUCTS_AFFECTED,INCIDENT_CUSTOMERS_AFFECTED, "
strSQL = strSQL & " CHANGE_EXTENT_AFFECTED, CHANGE_CAUSED_BY_CHANGE, CHANGE_RFC_NUMBER, CHANGE_BACK_OUT_INITIATED, CHANGE_RFC_FOLLOWUP_NUMBER, "
strSQL = strSQL & " PROBLEM_OWNER, PROBLEM_CATEGORY, PROBLEM_STATUS, PROBLEM_IMPACT, PROBLEM_URGENCY, "
strSQL = strSQL & " INCIDENT_SECONDARY_TICKET_NBR,INCIDENT_EVENT_DESCRIPTION,PROBLEM_DETAILS,DISCUSSION_DONE_RIGHT,DISCUSSION_PROCEDURAL_ISSUE,DISCUSSION_BETTER_NEXT_TIME,DISCUSSION_PREVENT_PROBLEM,PROBLEM_WWORKAROUND )"
strSQL = strSQL & " ALT_TICKET1,ALT_SYSTEM1,ALT_STATUS1,ALT_DATE_OPENED1,ALT_DATE_CLOSED1,ALT_SEVERITY_LEVEL1,ALT_PRIMARYOWNER1,ALT_LINK1,ALT_TICKET2, "
strSQL = strSQL & " ALT_SYSTEM2,ALT_STATUS2,ALT_DATE_OPENED2,ALT_DATE_CLOSED2,ALT_SEVERITY_LEVEL2,ALT_PRIMARYOWNER2,ALT_LINK2 )"
strSQL = strSQL & " values ('"
strSQL = strSQL & nbrRcaTicketId & "','"
strSQL = strSQL & Me!nbr_REPORT_AUTHOR_STAFF_ID & "','"
strSQL = strSQL & Me!dte_Report_Start_Date & "','"
strSQL = strSQL & Me!dte_Report_Close_date & "','"
strSQL = strSQL & Me!str_Report_Paticipants_In_Review & "','"
strSQL = strSQL & Me!nbr_Incident_Ticket_Number & "','"
strSQL = strSQL & Me!nbr_Incident_Severity_Level & "','"
strSQL = strSQL & Me!dte_Incident_Start_date & "','"
strSQL = strSQL & Me!dte_Incident_Start_Time_Event & "','"
strSQL = strSQL & Me!dte_Incident_Time_Service_Down & "','"
strSQL = strSQL & Me!dte_Incident_End_date & "','"
strSQL = strSQL & Me!dte_Incident_Time_Service_Up & "','"
strSQL = strSQL & Me!dte_Incident_Time_Up_To_Customer & "','"
strSQL = strSQL & Me!nbr_Incident_Outage_Duration & "','"
strSQL = strSQL & Me!nbr_Incident_Detection_Method & "','"
strSQL = strSQL & Me!nbr_Incident_Discovered_By & "','"
strSQL = strSQL & Me!nbr_Incident_Resp_Group & "','"
strSQL = strSQL & Me!str_Incident_Owner & "','"
strSQL = strSQL & Me!str_Incident_Products_Affected & "','"
strSQL = strSQL & Me!str_Incident_Customers_Affected & "','"
strSQL = strSQL & Me!str_Change_Extent_Affected & "','"
strSQL = strSQL & Me!str_Change_Caused_by_Change & "','"
strSQL = strSQL & Me!nbr_Change_RFC_Number & "','"
strSQL = strSQL & Me!str_Change_Back_out_Initiated & "','"
strSQL = strSQL & Me!nbr_Change_RFC_Followup_Number & "','"
strSQL = strSQL & Me!nbr_Problem_Owner & "','"
strSQL = strSQL & Me!nbr_Problem_Category & "','"
strSQL = strSQL & Me!nbr_Problem_Status & "','"
strSQL = strSQL & Me!nbr_Problem_Impact & "','"
strSQL = strSQL & Me!nbr_Problem_Urgency & "','"
strSQL = strSQL & Me!nbr_Incident_Secondary_Ticket_Numbers & "','"
strSQL = strSQL & Me!str_Incident_Event_Description & "','"
strSQL = strSQL & Me!str_Problem_Details & "','"
strSQL = strSQL & Me!str_Discussion_Done_Right & "','"
strSQL = strSQL & Me!str_Discussion_Procedural_Issue & "','"
strSQL = strSQL & Me!str_Discussion_Better_Next_Time & "','"
strSQL = strSQL & Me!str_Discussion_Prevent_Problem & "','"
strSQL = strSQL & Me!str_Problem_WWorkaround & "','"
strSQL = strSQL & Me!nbr_ALT_TICKET1 & "','"
strSQL = strSQL & Me!nbr_ALT_SYSTEM1 & "','"
strSQL = strSQL & Me!nbr_ALT_STATUS1 & "','"
strSQL = strSQL & Me!dte_ALT_DATE_OPENED1 & "','"
strSQL = strSQL & Me!dte_ALT_DATE_CLOSED1 & "','"
strSQL = strSQL & Me!nbr_ALT_SEVERITY_LEVEL1 & "','"
strSQL = strSQL & Me!nbr_ALT_PRIMARYOWNER1 & "','"
strSQL = strSQL & Me!str_ALT_LINK1 & "','"
strSQL = strSQL & Me!nbr_ALT_TICKET2 & "','"
strSQL = strSQL & Me!nbr_ALT_SYSTEM2 & "','"
strSQL = strSQL & Me!nbr_ALT_STATUS2 & "','"
strSQL = strSQL & Me!dte_ALT_DATE_OPENED2 & "','"
strSQL = strSQL & Me!dte_ALT_DATE_CLOSED2 & "','"
strSQL = strSQL & Me!nbr_ALT_SEVERITY_LEVEL2 & "','"
strSQL = strSQL & Me!nbr_ALT_PRIMARYOWNER2 & "','"
strSQL = strSQL & Me!str_ALT_LINK2 & "');"
db.Execute strSQL
MsgBox nbrRcaTicketId & " has been added to the Customer table."
Call ClearControls
rsCust.Close
db.Close
Exit_btn_add_rca_record_Click:
Exit Sub
Err_btn_add_rca_record_Click:
MsgBox Error$
rsCust.Close
db.Close
GoTo Exit_btn_add_rca_record_Click:
End Sub
Code End:
View 1 Replies
View Related
Dec 20, 2006
Hello,
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
Thankful for help with this!
//Patrick
View 3 Replies
View Related
Mar 26, 2007
Hi!
Have a problem to execute xp_cmdshell with a proxy user in MSSQL2005 (9.00.2047.00). The error is:
Msg 15121, Level 16, State 10, Procedure xp_cmdshell, Line 1
An error occurred during the execution of xp_cmdshell. A call to 'CreateProcessAsUser' failed with error code: '1314'.
The proxy user is a local administrator on the sql server machine. The proxy user have €śReplace a process level token€? rights thru the group SQLServer2005MSSQLUSer (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=627221&SiteId=1).
I have even tried to use a domain administrator as proxy user, but the same error occur.
What is wrong? I have search the internet a lot and found that many people have this problem without any answer.
Thanks in advance,
John
View 15 Replies
View Related
Aug 11, 2005
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
View 9 Replies
View Related
Mar 28, 2006
I get this error when trying to run xp_cmdshell. I have turned on xp_cmdshell via sp_configure and verified it is on (set to 1) by running sp_configure again. The login trying to run xp_cmdshell has sysadmin privileges. If anyone has a solution please let me know.
View 8 Replies
View Related
Dec 7, 2005
I've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
View 73 Replies
View Related
Feb 17, 2006
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks!
-Krusty
View 1 Replies
View Related
Oct 9, 2007
I can run this package in Studio and it works fine, but when I run it from SQL Server Agent, it throws this error. Does anybody know what would cause this problem. This appears to occur during validation for the package because none of the data flow steps run. The connection being used is the same connection used in all of the data flows. If validation is done in order, then prior steps using the same connection are passing validation.
Thanks,
Steve
View 5 Replies
View Related
May 7, 2007
Hello,
Until a few weeks ago I was very satisfied with my frontend/backend application Access 2003/SQL Server Express. Then I tried to build a website with Dreamweaver 8.0 and connect it to the Server DBase and everything went wrong. My problems are the following:
In trying out the connection between DW and SQL I tried and changed some things with no result. I suddenly got a problem with the Norton firewall (wurms part) and with the named instance. At this very moment I sometimes have to switch from ".SQLEXPRESS" to "<machinename>SQLEXPRESS under Windows authentication. (provider: TCP provider, error 0 - no connection because of an active refuse of the goalcomputer)(MSQL Server error 10061). How can I solve this problem?
The connection between DW (using ASP) and SQL Server always gives the same error: "ODBC drivers error 80004005 cannot open database x requested by login. The login failed". I tried everything I know (that isn't much by the way) but getting no connection between the two programs. When I test the connection and the recordset in DW everything is OK. Anyone any suggestions?
The third problem is the most important. By doing things like (1) en (2) my frontend/backend database has become very very slow (it takes minutes to get a simple query done) and in fact doesnot function at all. When I look in de SQL part everything seems OK and I can open the tables quickly, but in Access the menus work but the forms and queries don't. This problem is very essential to me and I hope there is a solution?
I hope I'll get some answers to the above questions.
Thanks in advance.
Rob
View 5 Replies
View Related
Aug 20, 2007
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009.
Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
View 1 Replies
View Related
Apr 27, 2006
Hi,
I need help with a problem: When trying to process a analysis services project, I receive the following error message -
OLE DB error: OLE DB or ODBC error: Login failed for user 'NT AUTHORITYLOCAL SERVICE'.; 28000; Cannot open database "DocumentDB" requested by the login. The login failed.; 42000.
I am using the service account for impersonation for the datasource. One suggestion I received from the data-access forum was to grant privileges to the local service for the database. I am not clear about the procedure to do that. Can someone please guide me through this? I am posting this question in this forum since this is a authentication/privilege issue.
- Sanchet
View 6 Replies
View Related
Dec 27, 2007
Hi,
I am working on SQL Server 2005 (x64) with Windows Server 2003 (x64) operating system. I am having a major issue in SSIS. Here is the detailed explanation of the issue :
I have an EXCEL file in 2003 / 2007 version. It contains some data. I want to import the data using SSIS into SQL Server 2005 (x64) database table. I have taken "EXCEL FILE SOURCE" and "SQL Server DESTINATION". It was failed on importing data. Surprisingly it works fine in SQL Server 2005 (x32). Can you please explain why it is NOT woking on (x64) ?
Here is the error code i am getting:
[Excel Source [1]] Error: The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009.
Appreciate your time and patience !!
Thanks
View 3 Replies
View Related
Feb 14, 2008
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
View 5 Replies
View Related
Apr 27, 2007
Hello everyone,
I am struggling with this error and it's starting to get to me!
I have setup a simple project with just a data flow task. In this task, it retrieves a simple record "Select * From Table1 WhereId=1". The connection is an OLE Db connection using Advantage Oledb Provider (a provider for accessing dBase). It is accessing a Novell network drive. I have setup the package to both "EncryptSensitiveWithPassword" and "DontSaveSensitive". Both times i have received this error.
The funny thing is, when I set the package to "EncryptSensitiveWithPassword" and I setup a job to run the package, it never asks me for the password even though I set one up! I have a previous package (few months ago I made) that accessed the same database on the same Network drive and it works! It also asks me for a password when I try to modify or run the package (b/c I set it to "EncryptW/Password").
Can anyone give any light into this problem?
Thansk for all your support,
Adrian
View 1 Replies
View Related
Jul 23, 2005
Hello.How can I call some functions on MSDE when working in Access (.mdb) that isconnected to MSDE via ODBC linked tables ? Especiallyin-line functions, that I would like to use as recordset for my forms andreports.Can I call in-line functions using ADO ? I tried, but it seems that onlystored procedures are allowed (adCmdStoredProc)....Thanks.
View 1 Replies
View Related
May 14, 2008
Hi all
This Job ran yester day fine,to day It got failed with this error
any suggestion to troubleshoot problem is appreciated.
DTSRun OnError: DTSStep_DTSTransferObjectsTask_1, Error = -2147203052 (80044814)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
Error Detail Records:
Error: 0 (0); Provider Error: 0 (0)
Error string: [Microsoft][ODBC SQL Server Driver][SQL Server]Login failed for user '(null)'. Reason: Not associated with a trusted SQL Server connection.
Error source: Microsoft SQL-DMO (ODBC SQLState: 28000)
Help file: SQLDMO80.hlp
Help context: 1131
DTSRun OnFinish: DTSStep_DTSTransferObjectsTask_1
DTSRun: Package execution complete.
View 3 Replies
View Related
Mar 24, 2008
I am using SSIS 2005 on Windows 2003 server. Using Excel Source to dump the data for staging database.
I am getting following error while I execute it through BI studio's execute button.
Please help.
- Sachin
View 2 Replies
View Related
Mar 11, 2008
I have deployed my packages into Sql Server and I am using Configuration File. As my Data Source is Excel, I have changed the connection string during deployment with Server Path. But I am getting the following errors. Actually the File Exist in Path. May I know What is cause of the issue? Do I need to give any permission to execute the package.
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
component "Excel Source Service Contract Upload" (1) failed validation and returned error code 0xC020801C.
One or more component failed validation.
There were errors during task validation.
DTS_E_OLEDBERROR, Error Code: 0x80004005 Source: "MS JET DB Engine" Description : Path is not valid
View 27 Replies
View Related
May 3, 2004
I have recently moved some native Access tables to SQL Server 7. These tables are updated in code. When the update is done via a SQL statement, I get
"This record is being modified by another user. . . Save, Copy to Clipboard, Drop Changes"
When the record is being updated via DAO code, I get,
"ODBC Call Fail"
Both errors are most irritating and I desperately need to find a way around this. Any suggestions would be greatly appreciated.
Crystal
View 1 Replies
View Related
Apr 18, 2008
Hi,
I have a ms access application with a button. Clicking this button runs a sql server 2000 stored procedure. The stored procedure updates product information. When I click the button it updates the products fine. When the users (with lesser permissions than me) click the button, no error message is sent but the transactions are rolled back. Does anyone know why or how this could happen? Please let me know before I pull out the last strands of hair from my head.
Thank you,
Anand
View 4 Replies
View Related
Oct 18, 2007
We have an application that use SQL server 2005 . The databses on the server are mirrored. Also we have witness. During a test we failovered from principal to mirrored server. Our application gets error message during 5 minutes. The errors were that sql connection has timeout.
Also on mirrored server in event viewer I found next errors:
An SNI call failed during a Service Broker/Database Mirroring transport operation. SNI error '10065(error not found)'.
You can find this error in sys.message, where message_id=8471
An error occurred in a Service Broker/Database Mirroring transport connection endpoint, Error: 8471, State: 2. (Near endpoint role: Initiator, far endpoint address: '10.10.23.8')
The mirroring connection to "TCP://primary_srv:5022" has timed out for database "Application_database" after 10 seconds without a response. Check the service and network connections.
Database mirroring connection error 2 'Connection attempt failed with error: '10060(error not found)'.' for 'TCP://primary_srv:5022'.
Database mirroring connection error 4 '64(error not found)' for 'TCP://primary_srv.posprod.supersol.co.il:5022'.
last 2 errors can be found in sys.message, where message_id=1474Our computers is windows 2003, SQL2005 sp2 with fotfix of audust. Also few ours before this test .Net3 was installed on those computers.
Any advises? Some help & ideas. What does this errors means?
View 2 Replies
View Related
Mar 21, 2006
Hi all,
While i am doing new substription wizad, I encounter following error: Do I miss something?
A call to SQL Server Reconciler failed. Try to resynchronize.
A call to SQL Server Reconciler failed. Try to resynchronize.
HRESULT 0x80004005 (29006)
The schema script 'C:Program FilesMicrosoft SQL ServerMSSQLReplDataunccompuntername_SQLMOBILE_SQLMOBILE20060321224198CustomerData_2.sch' could not be propagated to the subscriber.
HRESULT 0x80070005 (0)
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
HRESULT 0x80045017 (0)
I am using
IIS 5.1
SQL 2005 (Upgrade from SQL 2000 SP4)
Visual Studio 2005
Thank you very much
Tony
View 4 Replies
View Related
Dec 12, 2007
Can anyone give a quick description of the meaning of this message andwhat needs to be done to get a connection.I'm running DBArtisan with SQLServer 2000 client SP4 installed.I also get the same message with MS Enterprise Manager so this iscoming out of the actual ODBC connection attempt.Thanks in advance!
View 1 Replies
View Related
Oct 28, 2006
Hi, Everyone:
I am getting the following error message when I try to execute a SSIS package from an asp.net page written in C# 2.0. What I am trying to do is basically just click on a button in the web page and it will execute the package. The code to execute the package is pretty simple. I pass the path of the DTS package stored in the local folder. This works fine in the machine where SQL2005 is installed locally. But it fail when I have a seperate Web Server and SQL Server. Any ideas? Do I have to install SSIS or SQL2005 on a web server as well?
Thanks
static public string Execute_SSIS_DTS(string DTS_Path)
{
Microsoft.SqlServer.Dts.Runtime.Application app;
app = new Microsoft.SqlServer.Dts.Runtime.Application();
Package package = app.LoadPackage(DTS_Path, null);
DTSExecResult result = package.Execute();
return result.ToString();
}
Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.
Line 226: static public string Execute_SSIS_DTS(string DTS_Path)
Line 227: {
Line 228: Application app = new Application();
Line 229: Package package = app.LoadPackage(DTS_Path, null);
Line 230: DTSExecResult result = package.Execute();
[COMException (0x80040154): Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.]
Microsoft.SqlServer.Dts.Runtime.Application..ctor() +43
[DtsPipelineException: Retrieving the COM class factory for component with CLSID {E44847F1-FD8C-4251-B5DA-B04BB22E236E} failed due to the following error: 80040154.]
Microsoft.SqlServer.Dts.Runtime.Application..ctor() +169
Utilities.Execute_SSIS_DTS(String DTS_Path) in c:InetpubwwwrootMasterTablesApp_CodeUtilities.cs:228
MasterTables_Admin_MasterTables_LOINC_External.btn_SyncLISTest_Click(Object sender, EventArgs e) in c:InetpubwwwrootMasterTablesMasterTables_CustomMasterTablesCustom_LOINC_External.aspx.cs:98
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +114
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +141
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3215
View 1 Replies
View Related
Feb 13, 2008
Hi All,
I have a DB2 database on aix server. we had to move some tables to SQL Server 2005. We created individual SSIS files for each table and saved it on the desktop. When I run the package file by double clicking on it the "Execute Package Utility" dialogue box appears and I can click on the "Execute" button and everything goes fine.
But if I try to open the same package using "SQL Server Business Intelligence Devlopment Studio" or to run the same package with DTEXEC /f <Filename> , it gives me below error.
=====================================================================================
Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionOLEDB" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
=====================================================================================
I am stuck on this error and need help!!!
Shailesh
View 1 Replies
View Related
