ODBC Data Source Administrator Problem
May 25, 1999
I have been using ODBC data source administrator for years without any problem. However, after a unsuccesful MSSQL7.0 installation, i keep getting
the following message:
"An error occurred while windows was working with the control panel file
D:WINNTSystem32Odbccp32.cpl"
Any insight into this would be greatly appreciated.
Thanks,
--Lawrence
View 1 Replies
ADVERTISEMENT
Mar 2, 2007
I have set up a new connection as a connection from data source, but I cannot see how to use this connection to create my Data Flow Source. I have tried using an OLE DB connection, but this is painfully slow! The process of loading 10,000 rows takes 14 - 15 minutes. The same process in Access using SQL on a linked table via DSN takes 45 seconds.
Have I missed something in my set up of the OLE DB source / connection? Will a DSN source be faster?
Thanks in advance
ADG
View 2 Replies
View Related
Dec 8, 2007
Hi all,
I am new to SQL Server. I have some basic questions.
I have installed SQL Server Developer Edition on a Windows XP Media center edition. The installation is successful. Now I am trying to create an ODBC, but I there are some options which I am not quite sure about.
e.g.
1. How SQL Server verify the authenticity of the login ID?
A. Windows NT....
B. SQL Server....
Client Configuration:
Server alias: ???
Named Pipes: What should be the values of [pipe name]?
or should i choose other options?....
And I when I use Query Analyzer to connect to Server, the authentication fails..
Can some one point me to the right direction, or if there's some documentation on this subject, that would be very much appreciated.
Thanks in advance.
View 11 Replies
View Related
Jun 27, 2006
I'm trying to import tables from COBOL thru Relativity client. With SQL Server 2000, I used Other (ODBC Data Source) to do this. I cannot find a comparible data source in SQL Server 2005. What do I do?
View 15 Replies
View Related
May 2, 2006
I am new to SSIS packages and want to use an ODBC data source connected to an old Btrieve set of data files. I set up the ODBC DSN, and my SQL Server Data Connection, and can browse the tables in the Server Explorer. However with regards to my SSIS package, I'm not sure whether to use an OLE DB Source or Data Reader Source. I have futzed with both of them but haven't had any luck at seeing the tables. Can someone please give me some tips.
Thanks,
Carson
View 10 Replies
View Related
Jun 25, 2007
I am trying to use the ADO.NET bridge to connect to an old database on RISC6000 via an ODBC connection, but I receive an error.
So, I would use a script component to retrieve data directly from an ODBC connection, using a stored procedure.
Any sample code ?
Any idea ?
Thanks
View 1 Replies
View Related
Mar 18, 2007
A data reader is using a connection manager to connect to an ODBC System DSN . A query in the SqlCommand property is provided. Data is being truncated in the only string column . The data type in data reader output-->external columns shows as Unicode string [DT_WSTR] Length 7.
The truncated output in a text file is the first 3 characters from left to right . Changing the column order has no effect.
A linked server was created in SQL Server Management Studio to test the ODBC System DSN using the following:
EXEC sp_addlinkedserver
@server = 'server_name',
@srvproduct = '',
@provider = 'MSDASQL',
@datasrc = 'odbc_dsn_name'
Data returned using "OPENQUERY" does not truncate the string column indicating that the ODBC Driver returns data as expected with sql 2005, but not with the Data Reader.
Any assistance would be appreciated.
Thanks,
View 3 Replies
View Related
Jul 18, 2001
I'm trying to create an ODBC Data Source on both an NT 4.0 server and 2000 Professional workstation that are remote. I can not seem to get them to connect. What do I put in the server name field when creating the network library connection? I have tried both the ip address and fully qualified domain name of the sql server and neither worked.
Thanks in advance,
-Marty
View 1 Replies
View Related
Mar 7, 2006
HI EVERYONE...!!
I WANT TO CREATE A DATA FLOW SOURCE ON ODBC TO SQL BUT A CAN'T FIND THE ODBC DATA FLOW SOURCE. SOMEBODY CAN SAY ME HOW DO THIS????
THANKS...!!!
View 3 Replies
View Related
Mar 7, 2006
HI EVERYONE...!!
I WANT TO CREATE A DATA FLOW SOURCE ON ODBC TO SQL BUT A CAN'T FIND THE ODBC DATA FLOW SOURCE. SOMEBODY CAN SAY ME HOW DO THIS????
THANKS...!!!
View 1 Replies
View Related
Apr 20, 2006
As other contributors, all I am trying to do is import data from an ODBC source (spelled 'non-Microsoft data source') into a SQL 2005 table. I can easily do this in SQL 2000 with DTS, but when I use the same DSN in VS 2005 it doesn't work.
I created an integration project, and made a connection in Connection Manager to the DSN and clicked Test Connection. It succeeded, or so it claimed.
Click OK and drag a DataReader Source onto the Data Flow surface Doubleclick it and select the connection manager per above. Note the error: Error at Data Flow Task [DataReader Source[50]]: Cannot acquire a managed connection from the run-time connection manager.
What does that mean? More to the point, how to fix it?
View 7 Replies
View Related
Dec 31, 2005
Hi all,
My replication of those SQL 2000 servers gave errors: Data source (11): General Network Error. Check your network documentation... and ODBC (08S01): Communication link failure. The replication was across the WAN. I don't know where to start to troubleshoot this problem. Please help!
Thanks in advance.
John
View 12 Replies
View Related
Apr 10, 2008
Hello,
There is a SQL Server databse installed in my machine.
I want to modify a data in a table.
How can I access the data with ODBC Administration?
Thanks
View 6 Replies
View Related
Jan 22, 2007
I am running Microsoft SQL Server 2005 Express Edition, and I am having difficulties setting up an ODBC User Data Source to connect to the SQL server.
I have tried going through "Control Panel -> Administrative Tools -> Data Sources (ODBC)" to add a user data source. For the SQL Server to connect to, I have tried specifying "localhostSQLEXPRESS", "SQLEXPRESS", "(local)", etc. -- but nothing seems to work. When the DSN configuration wizard tries to connect to the SQL Server to obtain default settings, it fails with the error "SQL Server does not exist or access denied". (Same error occurs if I try connecting to this ODBC data source later.)
But I know that the SQL Server exists and I have been using it through the SQL Server data provider in another application.
I am new to this, so any help or pointers would be greatly appreciated.
Thanks,
Kumar
View 2 Replies
View Related
Jun 3, 2002
We have more than 10 databases on the same server. When I try to set up ODBC connection through my desktop to a specific database (DB1) using SQL authentication, it acts weird:
-- I give the login (testkz) access to DB1, DB1 does not show up in the default database list; I tried to type in the database name, it is not taken
-- If I give 'testkz' access to two other databases (and only these two), even though I did not give access to DB1, DB1 together with some other databases show up on the default database list. Seems to me that there are some dependency among the dbs.
Does anybody have any issues like this?
Your input is appreciated.
View 3 Replies
View Related
Jul 16, 2013
I am trying to setup an ODBC data source for Access. The server I'm trying to connect to is 2008 R2. I have SQL Server Management Studio installed on the computer where I'm trying to make the ODBC Data Source from. I can connect the the remote 2008 server through Management Studio, but in the ODBC wizard I do the following:
"Machine Data Source" tab, click "New"
Select "User Data Source", click "Next >"
Select "SQL Server", click "Next >"
Click "Finish"
Name: remote
Description: remote
Server: type the server name ie "sql.somewhere.com"
[code]....
View 11 Replies
View Related
Jul 20, 2005
Is there a script anyone has that will automate the addition of anaccess database to the OBDC datasources in control panel.Thanks
View 1 Replies
View Related
Feb 13, 2008
I hope this is a fairly simple problem that I'm just missing. I've installed SQL Server 2005 Developer Edition on Windows XP Professional. I'm trying to create an ODBC data source under an ID I created ("InstallOwner") that is part of the administrators group. In the Wizard, I give it a name and default to the "local" server. I selected to authenticate the ID using SQL Server authentication. However when I enter the ID and Password, I get the following error.
"Connection Failed - SQL State=28000, SQL Server Error: 18456, [microsoft][SQL Native Client][SQL Server] Login Failed for user "InstallOwner". If I use the "sa" account, it works fine. Can someone point me in the right direction?
View 2 Replies
View Related
Feb 7, 2007
Hi,
I am trying to import tables from an ODBC data source into an SQL Server 2005 database. I presume that one way to achieve this is to create an Integration Services package, via Business Intelligence Studio (I already used DTS in SQL Server 2000, but not Integration Services) ?
Or is there a simpler way ? For instance, is there an import wizard that woult include an ODBC Data source ?
Thanks i advance.
View 1 Replies
View Related
Feb 12, 2008
I'm attempting to use SSRS (2005) with my Oracle RDB database (old DEC RDB), using an ODBC driver. I am able to create a report, and view data, but I need to add some report parameters to filter the data. When I attempt to use parameters in the query, I either get a syntax error, or a message that my odbc connection cannot use "named" parameters, and that I should use "unnamed" parameters.
Here is a snippet of my sql query:
SELECT Application_Notes.Lease_Application, Application_Notes.Followup_Code,
<...>
FROM
Application_Notes Join
<...>
WHERE
(Application_Notes.Tickler_date >= {ts '2008-02-08 00:00:00'} AND
Application_Notes.Tickler_Date < {ts '2008-02-09 00:00:00'} )
The "Tickler_Date" field is a binary date field. The above syntax is pulled from a Crystal Report, which I am considering moving over to SSRS. Ideally, I would like the user to enter a single RunDate parameter, and have the query do the following:
Where (Application_Notes.Tickler_Date >= @RunDate and
Application_Notes.Tickler_Date < (@RunDate + 1 day) )
If the user has to enter two dates, that will be fine, but I can't seem to get past the errors.
Thanks,
Paul
View 6 Replies
View Related
Jul 28, 2006
Good morning all,
I have created this query in SQL Server 2005 which uses an MS SQL Server data source - I've tested it and it perfroms as it should:
SELECT DISTINCT
WIP.R0 AS [Job No], WIP_R23.R0 AS [Pack No], PlanningM2.R1 AS [Part No], WIP.R17 AS FKF, WIP2.R17 AS FKF2, SUBSTRING(PlanningM2.R0, 1, 3)
AS Ref, PlanningM2.R5 AS Qty, LTRIM(RTRIM(WIP_R23.R23)) AS Shortages, LEN(PlanningM2.R1) AS StrLen, Stock.R2 AS [Stock Qty],
WIP.R10 AS Status, WIP2.R10 AS [Pack Status], WIP.R15 AS [Qty UC]
FROM C001_UNIDATA_WIP_NF AS WIP INNER JOIN
C001_UNIDATA_PLANNINGM_NF AS PlanningM ON WIP.R0 = PlanningM.ASSY INNER JOIN
C001_UNIDATA_PLANNINGM_NF AS PlanningM2 ON PlanningM.R1 = PlanningM2.ASSY INNER JOIN
C001_UNIDATA_WIP_R23 AS WIP_R23 ON PlanningM.R1 = WIP_R23.R0 INNER JOIN
C001_UNIDATA_WIP_NF AS WIP2 ON WIP_R23.R0 = WIP2.R0 INNER JOIN
C001_UNIDATA_STOCK_NF AS Stock ON PlanningM2.R1 = Stock.R0
WHERE (WIP_R23.R23 IS NULL) AND (WIP.R0 LIKE N'%' + @RP1 + N'%') OR
(WIP.R0 LIKE N'%' + @RP1 + N'%') AND (PlanningM2.R1 = RIGHT(LTRIM(RTRIM(WIP_R23.R23)), LEN(PlanningM2.R1)))
ORDER BY [Job No], [Pack No]
I am now trying to recreate this query using ODBC and am having one helluva problem with it as it doesn't seem to like many of the functions I've used, such as LTRIM, RTRIM, LEN, RIGHT and won't accept the parameter I've included, or any other parameter come to think of it.
Has anyone else had a similar problem at all, and could you direct me to a solution if you have?
Thanks in advance,
Chris
View 5 Replies
View Related
May 3, 2006
I'm having an odd issue importing data from an ODBC source using a DataReader Source.
There's data in the source table, and if I use a non-SSIS tool to query the source, all the data is visible. However, if I use the SSIS DataReader source, It returns no rows, and throws no error.
Any ideas for figuring this one out? This is affecting about 10% of the tables from this data source, and it's our ERP application, so there's limits on what I can do to the source schemas.
Thanks!
View 1 Replies
View Related
May 30, 2007
Hello All,
How do I get columns to output when I have a data reader source? My connection is an ODBC and does complex sql. I am connection to a Netezza database and I would like to execute a very complex query, but in essence does
Create newtable as
(select day, sessionId)
from source
// lots of other joins and unions
select day, sessionId from newtable
drop newtable
I have an ODBC connection and I have a Datareader source, I cannot connect this source to my SQL Server destination because no output columns are available. What am I missing here?
Are there any good examples of this, taking data from a ODBC source into SQL server?
Thanks in advance.
View 5 Replies
View Related
Mar 12, 2008
Here's the context:
Database server:
- Remote machine running SQL 2005 Standard as a named instance
- Named pipes and TCP are enabled for remote connections
- SQLBrowser service is running
- Listening on default named pipe (\servernamepipeMSSQL$instancenamesqlquery)
Client:
- Vista Business machine
- Not in same domain as server, but on the same network (via Cisco VPN)
- SQL 2005 Express is installed (for use with local databases)
- Windows Firewall enabled
- Running Symantec Antivirus, Corporate Edition
Connectivity:
- I CAN connect to SQL 2005 databases on the remote server using "nperverinstancename"
- I CAN connect to SQL 2005 databases on the remote server using Excel 2007
The problem is that I cannot successfully create an ODBC datasource using the "ODBC Data Source Administrator" application. I'm using the "SQL Server" driver and trying to create a System DSN. I'm also running the tool with elevated permissions.
- When I try to use "servernameinstancename" as the server and TCP as the connection type, I get this error:
Connection failed: SQL Server Error: 18452; "[Microsoft][ODBC SQL Server Driver][SQL Server] Login failed for user ''. The user is not associated with a trusted SQL Server connection.
- When I try to use "npervernameinstancename" as the server and Named Pipes, I get this error:
Connection failed: SQLState: '01000'; SQL Server Error: 1326; [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen(Connect()).
Connection failed: SQLState: '08000'; SQL Server Error: 17; [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied.
Help! I've really been beating my head against the wall on this one. It all works just fine with a Windows XP client machine.
View 7 Replies
View Related
May 3, 2007
Sql server driver missing from odbc administrator;
Software; SQL Server 2005 SP2 installed on W23K SP1.
Under Drivers tab in odbc administrator the sql server that uses sqlsrv32.dll, is missing. All the other drivers that comes with W2K3 Service pack1 is there. In addition i can see the SQL Native Client(SQLNCLI.DLL).
I have an application that has to use SQL Server Driver. How can i get it back?
Hope someone can help me?
View 4 Replies
View Related
Oct 19, 2006
I've installed SQL Express SP1 on a Windows 2003 server and I'm trying to get a new MySQL datasource to be recognized in the DTSWizard. A MySQL database needs to be moved over to a MS SQL server due to software requirements (which weren't looked at before the site was created). I've installed the ODBC Connector/MySQL software and created the System DSN (named "MySQL DB Import) in the Administrative Tools/Data Sources (ODBC) tool. When I start up the DTS wizard for SQL Express however, I do not get my new data source in the selection options for data sources. I am following the instructions on this page: http://www.microsoft.com/technet/prodtechnol/sql/2000/deploy/mysql.mspx#ERJAE What am I missing?
View 2 Replies
View Related
May 12, 2008
Hi all,
We are using a package to extract data from a source build on some image using SOLID ODBC 5.2 driver.
When we tried to extract data through MS SSIS(SQL Server Integration Services) package using SOLID 5.2 ODBC driver connection, it throws an error as mentioned below:
ERROR DESCRIPTION:
Error: 0xC02090F5 at Data Flow Task, DataReader Source [1]: The component "DataReader Source" (1) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Also, we tried the same in a Excel sheet using the SOLID 5.2 ODBC driver it is working fine.
Does the SOLID ODBC driver support .Net framework or do we need to install any other components??
Thanks and Regards,
Nirmal
View 2 Replies
View Related
Oct 2, 2006
Okay, this should be really simple but I don't get it. How do I use an ODBC data source in an SSIS data flow task? When I look at Data Flow Sources I see the following options:
Pointer
DataReader Source
Excel Source
Flat File Source
OLE DB Source
Raw File Source
XML Source
Which one do I use if I need to get the data from a connection manager that is ODBC based? The IBM OLEDB driver for the AS400 doesn't work correctly so I HAVE to use an ODBC driver to connect to an AS400 data source.
Thanks in advance for any info.
View 1 Replies
View Related
Jul 20, 2005
Hi,I used sp_addlinkedserver to link to a remote server through ODBC.When I execute select count(*) from LinkSrv.SI.DBO.SIHeader in SQL QueryAnalyzer. It returns 13705 records. But when I execute select * fromLinkSrv.SI.DBO.SIHeader. It only return 885 records. If I specify somecolumns, select ODCOMP, ODPONO, ODVDCD from LinkSrv.SI.DBO.SIHeader.It returns more records, 1213 records.I guess there is something limit the return storage, but I can notfind it.Any suggestion will be appreciated. Thank you
View 3 Replies
View Related
Nov 26, 2007
I am testing an application that uses mysql that works 100% fine with Microsoft Windows XP on Windows Vista Premium Home Edition.
Using Vista's ODBC Data Source Administrator I have set up and successfuly tested the DSN Connection to the Database.
However, when I call the set up DSN with the application I get [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
I am using the mysql-connector-odbc-3.51.12-win32.
I have tried editing the registry DSN files - the problem still persists.
Does anybody know a way to solve this problem
View 1 Replies
View Related
Apr 27, 2007
Hi All,
Do you have any idea why I am not getting any ODBC in import / export Data Source list???
I am trying to link connection with Informix Server through ODBC, same ODBC is working good with ACCESS.
I am using SQL Express 2005
Using Windows Authentication
Thanks for your help in advance
AA
View 11 Replies
View Related
Mar 6, 2006
I have created a stored procedure on the iSeries that creates a cursor and opens it. I am trying to write my report to use the stored procedure. I cannot get the data source to work. How do I create my data source so that it uses the stored procedure? My SP has three parameters I am trying to pass from the report. The parms are created in the layout.
Thank you
View 6 Replies
View Related
Jun 11, 2015
I am able to collect data from Progress DB, using ODBC Connectivity. The problem I am facing is, i have to iterate thru multiple servers. How do i configure ODBC source dynamically. It creates problem. Using expression, i tried to set the connectionstring dynamically, but it fails.
View 2 Replies
View Related