When I run some code through an odbc driver onto a SQL server 6.5 database, from vb an error is being returned along the lines of
22005 Syntax error converting 'string' to INT4
if I copy this code, either from vb or from sql trace, and run it in isql the code runs without any errors.
The only thing I have found is about NULLs so I have removed these from the code that is passed through?
Any more suggestions?
My proxy class returns web service responses well if I use it in a C# code.
I compile it with CSC and put it in GAC to use it with SSIS.
Then I get web service response with some field values populated with "Exception of type :{System.InvalidOperationException "' occured.
Here is the part of web service response received by the C# program:
Name
Value
Type
mainAddress
{Address}
Address
city
Metuchen
string
cityField
Metuchen
string
country
USA
Country
countryField
USA
Country
state
NEW_JERSEY
State
stateField
NEW_JERSEY
State
Here is the same object returned by compiled dll used in SSIS:
mainAddress
{BrokerConnectServiceV1.Address}
BrokerConnectServiceV1.Address
city
Metuchen
String
country
{System.Nullable(Of BrokerConnectServiceV1.Country)}
System.Nullable(Of BrokerConnectServiceV1.Country)
HasValue
FALSE
Boolean
Value
Exception of type: '{System.InvalidOperationException}' occurred.
BrokerConnectServiceV1.Country
Data
{System.Collections.ListDictionaryInternal}
HelpLink
Nothing
InnerException
Nothing
Message
Nullable object must have a value.
Source
mscorlib
StackTrace
at System.ThrowHelper.ThrowInvalidOperationException(ExceptionResource resource)
at System.Nullable`1.get_Value()
TargetSite
{System.Reflection.RuntimeMethodInfo}
state
{System.Nullable(Of BrokerConnectServiceV1.State)}
System.Nullable(Of BrokerConnectServiceV1.State)
HasValue
FALSE
Boolean
Value
Exception of type: '{System.InvalidOperationException}' occurred.
BrokerConnectServiceV1.State
Below is another posting by my associate on the same issue :
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=536615&SiteID=1
Any help is appreciated....
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e
ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
ODBC Driver: SQL Native Client
SQL server 2005
Table
CREATE TABLE [dbo].[RAVI_TEMP](
[ID] [int] NULL,
[Name] [varchar](max) NULL,
[CITY] [varchar](50) NULL
)
VC++ code
#include "stdafx.h"
#include <string>
#include <strstream>
#include <iomanip>
int main(int argc, char* argv[])
{
try
{
HRESULT hr = CoInitialize(NULL);
_RecordsetPtr pExtRst = NULL;
_bstr_t bstrtDSN, bstrtSQL;
bstrtDSN = L"DSN=espinfo;UID=opsuser;PWD=opsuser;";
bstrtSQL = L"SELECT * FROM RAVI_TEMP";
_variant_t vartValueID,vartValueNAME,vartValueCITY;
_bstr_t bstrtValueID,bstrtValueNAME,bstrtValueCITY;
pExtRst.CreateInstance(__uuidof(Recordset));
hr = pExtRst->Open(bstrtSQL, bstrtDSN, adOpenDynamic, adLockOptimistic, adCmdText);
hr = pExtRst->AddNew();
bstrtValueID = L"1";
vartValueID = bstrtValueID.copy();
bstrtValueNAME = L"RAVIBABUBANDARU";
vartValueNAME = bstrtValueNAME.copy();
bstrtValueCITY = L"Santa Clara";
vartValueCITY = bstrtValueCITY.copy();
pExtRst->GetFields()->GetItem(L"ID")->Value = vartValueID;
pExtRst->GetFields()->GetItem(L"NAME")->Value = vartValueNAME;
pExtRst->GetFields()->GetItem(L"CITY")->Value = vartValueCITY;
pExtRst->Update();
pExtRst->Close();
}
catch(_com_error e)
{
printf("Exception Description %s and Error Number:: %d",(LPTSTR)e.Description(),e.Error());
return e.Error();
}
return 0;
CoUninitialize();
}
if i use regular SQL ODBC driver, no error but its truncating the data
Adv Thanks for your help
The following (VB.Net) code causes exceptions at seemingly random times.
Any suggestions?
Not sure if the problem is in .Net's ODBC support or in Sql Native Client.
If MARS is off, usually after less than 100 loops:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [HY000] [Microsoft][SQL Native Client]Connection is busy with results for another command"
Source="SQLNCLI.DLL"
Turning MARS is on bypasses that error, so it will sometimes survive a thousand or so runs before hitting:
Code Snippet
System.Data.Odbc.OdbcException was unhandled
ErrorCode=-2146232009
Message="ERROR [23000] [Microsoft][SQL Native Client][SQL Server]Cannot insert the value NULL into column 'Number', table 'tempdb.dbo.#TempTable___..(shortened to fit).. _________000000002F3F'; column does not allow nulls. INSERT fails.
Source="SQLNCLI.DLL"
Code here:
(Console Application, empty database,
Visual Studio 2005, .Net 2.0, Windows XP,SQL Server 2005 or SQL Express 2005, Local or Remote)
Code Snippet
Module Module1
Sub Main()
'Dim connection As New SqlClient.SqlConnection("database=TestDB;server=.sqlexpress;Integrated Security=SSPI;") 'Doesn't crash
'Dim connection As New OleDb.OleDbConnection("Provider=SQLNCLI;database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Doesn't crash
'Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;") 'Crashes
Dim connection As New Odbc.OdbcConnection("Driver={SQL Native Client};Database=TestDB;Server=.sqlexpress;Trusted_Connection=yes;MARS_Connection=yes") 'Crashes
VBMath.Randomize()
Dim run_count As Integer = 1
connection.Open()
Console.WriteLine("Connected!!")
While True
'connection.Open()
Dim testcmd As New Odbc.OdbcCommand("CREATE TABLE [#TempTable] (Number int PRIMARY KEY)", connection)
testcmd.ExecuteNonQuery()
testcmd.Dispose()
testcmd = Nothing
Dim dtTemp As New DataTable
Dim daTemp As New Odbc.OdbcDataAdapter("SELECT * FROM [#TempTable]", connection)
daTemp.MissingSchemaAction = MissingSchemaAction.AddWithKey
daTemp.Fill(dtTemp)
Dim cbTemp As New Odbc.OdbcCommandBuilder(daTemp)
Dim viewTemp As New DataView(dtTemp, Nothing, "Number", DataViewRowState.CurrentRows)
Dim i As Integer
For i = 1 To 1000
Dim test_number As Integer = CInt(Rnd() * 2000)
If viewTemp.Find(test_number) = -1 Then 'Keep it unique
Dim new_temp_row As DataRowView = viewTemp.AddNew()
new_temp_row("Number") = test_number
new_temp_row.EndEdit()
End If
Next
daTemp.Update(dtTemp)
'daTemp.Dispose()
'daTemp = Nothing
'cbTemp.Dispose()
'cbTemp = Nothing
'dtTemp.Dispose()
'dtTemp = Nothing
'viewTemp.Dispose()
'viewTemp = Nothing
Dim testcmd2 As New Odbc.OdbcCommand("DROP TABLE [#TempTable]", connection)
testcmd2.ExecuteNonQuery()
testcmd2.Dispose()
testcmd2 = Nothing
'connection.Close()
'GC.Collect()
'Console.Write(".")
run_count += 1
End While
End Sub
End Module
Usually the ".Update" triggers the exception, but sometimes the other sql commands do it.
Have tried various experiments with disposing of objects immediately when finished, but no effect.
Opening and closing the connection each loop seems to delay the errors, but it still happens eventually.
I have an application that connects to SQL 2000 thru ODBC.
When our administrators login on the workstation the application
works well. But when ordinary users login they get the following error.
SQLState: 28000
SQL Server Error: 18452
Login failed for user ". The user is not associated with a trusted SQL Server connection.
I have restarted SQL Server and IIS to no avail. We are using SQL and Windows auth mode.
Any ideas? This just started this morning.
We have an application that connects to SQL 2005 thru ODBC with the following string:
driver=SQL Server;server=server1;database=db2005;uid=serveruser;pwd=pwd1;
When our administrators login on the workstation the application works well. But when ordinary users login they get the following error. (We only have 1 domain)
SQLState: 28000
SQL Server Error: 18452
Login failed for user ". The user is not associated with a trusted SQL Server connection.
Then the standard SQL Server Login window pops up asking for the Login ID and Password. On the window the 'Use Trusted Connection' is checked and the name of the user on the workstation appears on the LoginID. What we do is uncheck the 'Use Trusted Connection' then login using the credentials above.
Need help on this one please. Thanks.
Hi,
I am using Sql database in my asp.net application. the code runs fine on the machine where i m developing but when I try to run the code on other machine it gives following error--
error is related to access to database.(sql personal server is installed on local machine) I m giving the following connection string---
"Server=localhost;UID=sa;PWD=mypassword;Database=try1"
I have reinstalled the sql server using mixed mode authentication and the same sa password but still problem continues..
THE ERROR IT GIVES IS---
Server Error in '/try1' Application.
SQL Server does not exist or access denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: SQL Server does not exist or access denied.Source Error:
Line 49: SqlCommand cmdSelect;
Line 50: cmdSelect = new SqlCommand("select * FROM Departments", sqlConn);
Line 51: sqlConn.Open();
Line 52: return cmdSelect.ExecuteReader(CommandBehavior.CloseConnection);
Line 53: }Source File: c:inetpubwwwroot ry1DataAccessCode.cs Line: 51 Stack Trace:
[SqlException: SQL Server does not exist or access denied.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction)
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction)
System.Data.SqlClient.SqlConnection.Open()
try1.DataAccessCode.getDept() in c:inetpubwwwroot ry1DataAccessCode.cs:51
try1.WebForm1.Page_Load(Object sender, EventArgs e) in c:inetpubwwwroot ry1Login.aspx.cs:35
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
I keep getting this error:
OLE DB error: OLE DB or ODBC error: You do not have permission to run 'SP_TRACE_CREATE'.; 42000
I do not want to add the login account to sysadmin role on my production server and giving the logon account db_reader rights to my database is not working. Is there another way around it.
I have been searching high and low for days and I am perplexed and appalled at the lack of information regarding what can not be an isolated incident.
We are trying to get an Analysis Services 2005 to process on a x64 server. We have both versions of the Oracle client installed and .ora file in both places. I have seen a couple of posts regarding this issue, but they are 2 years old and MS was supposed to have resolved the 'parentheses' issue long ago.
The test connection succeeds, and I can explore the data in the datasource view, but I cannot process the cube. All I get is the "OLE DB error: OLE DB or ODBC error: Class not registered"
Microsoft Windows Server 2003 R2
Enterprise x64 Editon
Service Pack 2
Installed Oracle Client 10g and ODAC home
I tried a few things that were suggested in posts, but nothing has worked. I tried the cmd line starting SSMS from progra~2 instead of (x86). I tried renaming the directory with no parentheses. This is the second time we've tried to get it to work in 2 years. We'll probably give up again and stay with x86, um, because it works without all these silly mickey-mouse tricks. Most of our relational DBs are ORACLE so this is a showstopper for us as far as trying to go x64.
Sorry for the attitude, but I'm really frustrated!
If anyone can tell me a way to resolve this (or that it can't be resolved), I'd really appreciate it!
When i run it from sql server data tools on the test box it runs fine. However when i run it from the ssisdb directly i get the below error.
reload table tablename1 from Excel file:Error: The "filetoload.Outputs[Excel Source Output].Columns[Product]" failed because truncation occurred, and the truncation row disposition on "filetoload.Outputs[Excel Source Output].Columns[Product]" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
reload table t from Excel file:Error: There was an error with filetoload.Outputs[Excel Source Output].Columns[Product] on filetoload.Outputs[Excel Source Output]. The column status returned was: "Text was truncated or one or more characters had no match in the target code page.".
Running eval. edition of Sql Server Standard 2005. "Insufficient product level" error is thrown during validation phase of an OleDBCommand data flow task. This task type is not licensed in Sql Server 2005 standard? The component runs a very simple sql update statement against a one row table in Sql Server 2005.
If it works from BIDS, should it not work from dtexec.exe on the same box?
Does dtexec run under the security context of the logged in user?
Thanks,
Ken
I have simple query which creates tables by passing database name as parameter from a parameter table .
SP1 --> creates databases and calls SP2--> which creates tables . I can run it fine via SSMS but when I run it using SSIS it fails with below error .The issue gets more interesting when it fails randomly on some database creation and some creates just fine .
Note** I am not passing any database of name '20'
Exception handler error :
ERROR :: 615 :: Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ---------------------------------------------------------------------------------------------------- SPID: 111 Origin: SQL Stored Procedure (SP1) ---------------------------------------------------------------------------------------------------- Could not find database ID 20, name '20'. The database may be offline. Wait a few minutes and try again. ----------------------------------------------------------------------------------------------------
Error in SSIS
[Execute SQL Task] Error: Executing the query "EXEC SP1" failed with the following error: "Error severity levels greater than 18 can only be specified by members of the sysadmin role, using the WITH LOG option.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.I have sysadmin permission .
Hello I am receiving the dreaded mail error listed above. I can send out a test E-mail from Enterprise Manager to operators, but I cannot run this Transact query:
EXEC master.dbo.xp_sendmail @RECIPIENTS = araz***@***.com(removed email address),
@SUBJECT = 'test'
I receive:
Server: Msg 18025, Level 16, State 1, Line 0
xp_sendmail: failed with mail error 0x80040111
I have stopped/restarted the SQL SERVER AGENT but haven't done much else as I haven't been able to.
Should it work through transact SQL if the test email works from Enterprise Manager?
This is SQL 2000 SP4 running on Win2K in the domain. Thank you.
I have an SSIS package that runs fine through command pormpt although when I try to run it from a SQL Servr Agent Job CmdExec step it bombs out. Please help this has me stumped...the SSIS package uses an XML connection string so certain key settings such as connection strings and email info can be changed easily. Currently this is all on the same machine. I have not moved it beyond where I am developing.
On the command line I am using the following command...
dtexec /F "S:connectionscontacts.dtsConfig" /DE "password"
Below is the output log...
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.1399.06 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 6:59:40 PM
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.29
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.71
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.73
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.77
Source: Data Flow Task
Validating: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.79
Source: Data Flow Task
Prepare for Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.81
Source: Data Flow Task
Pre-Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.84
Source: Data Flow Task
Pre-Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.90
Source: Data Flow Task
Pre-Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Post Execute: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.92
Source: Data Flow Task
Cleanup: 0% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 33% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 66% complete
End Progress
Progress: 2006-08-16 18:59:41.93
Source: Data Flow Task
Cleanup: 100% complete
End Progress
Progress: 2006-08-16 18:59:41.95
Source: Send Mail Task
The SendMail task is initiated.: 0% complete
End Progress
Progress: 2006-08-16 18:59:42.09
Source: Send Mail Task
The SendMail task is completed.: 100% complete
End Progress
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 6:59:40 PM
Finished: 6:59:42 PM
Elapsed: 1.984 seconds
When I try to use the same command within SQL Server Agent Job using a CmdExec step I get the following error...
Description: The package is attempting to configure from the XML file "S:connectionscontacts.dtsConfig". End Info Warning: 2006-08-16 18:40:03.15 Code: 0x80012012 Source: contactsPackage Description: The configuration file name "S:connectionscontacts.dtsConfig" is not valid. Check the configuration file name. End Warning Warning: 2006-08-16 18:40:03.15 Code: 0x80012059 Source: contactsPackage Description: Failed to load at least one of the configuration entries for the package. Check configurations entries and previous warnings to see descriptions of which configuration failed. End Warning Info: 2006-08-16 18:40:03.20 ... Process Exit Code 1. The step failed.
Thanks in advance for any help!!!
Currently I receive the following error when executing script within a DTS package in SQL 2005 (it seems to be working in SQL 2000):
Processed 27008 pages for database 'Marketing', file 'Marketing_Data' on file 5.
Processed 1 pages for database 'Marketing', file 'Marketing_Log' on file 5.
BACKUP DATABASE successfully processed 27009 pages in 15.043 seconds (14.708 MB/sec).
(5 row(s) affected)
Msg 213, Level 16, State 7, Line 1
Insert Error: Column name or number of supplied values does not match table definition.
Msg 3013, Level 16, State 1, Line 1
RESTORE FILELIST is terminating abnormally.
The code I am using is:
-- the original database (use 'SET @DB = NULL' to disable backup)
DECLARE @DB varchar(200)
SET @DB = 'Marketing'
-- the backup filename
DECLARE @BackupFile varchar(2000)
SET @BackupFile = 'C:SQL2005 dbsMarketing.dat'
-- the new database name
DECLARE @TestDB2 varchar(200)
SET @TestDB2 = datename(month, dateadd(month, -1, getdate())) + convert(varchar(20), year(getdate())) + 'Inst1'
-- the new database files without .mdf/.ldf
DECLARE @RestoreFile varchar(2000)
SET @RestoreFile = 'C:SQL2005 dbs' + @TestDB2
DECLARE @RestoreLog varchar (2000)
SET @RestoreLog = 'C:SQL2005 dbs' + @TestDB2
-- ****************************************************************
-- no change below this line
-- ****************************************************************
DECLARE @query varchar(2000)
DECLARE @DataFile varchar(2000)
SET @DataFile = @RestoreFile + '.mdf'
DECLARE @LogFile varchar(2000)
SET @LogFile = @RestoreLog + '.ldf'
IF @DB IS NOT NULL
BEGIN
SET @query = 'BACKUP DATABASE ' + @DB + ' TO DISK = ' + QUOTENAME(@BackupFile, '''')
EXEC (@query)
END
-- RESTORE FILELISTONLY FROM DISK = 'C: empackup.dat'
-- RESTORE HEADERONLY FROM DISK = 'C: empackup.dat'
-- RESTORE LABELONLY FROM DISK = 'C: empackup.dat'
-- RESTORE VERIFYONLY FROM DISK = 'C: empackup.dat'
IF EXISTS(SELECT * FROM sysdatabases WHERE name = @TestDB2)
BEGIN
SET @query = 'DROP DATABASE ' + @TestDB2
EXEC (@query)
END
RESTORE HEADERONLY FROM DISK = @BackupFile
DECLARE @File int
SET @File = @@ROWCOUNT
DECLARE @Data varchar(500)
DECLARE @Log varchar(500)
SET @query = 'RESTORE FILELISTONLY FROM DISK = ' + QUOTENAME(@BackupFile , '''')
CREATE TABLE #restoretemp
(
LogicalName varchar(500),
PhysicalName varchar(500),
type varchar(10),
FilegroupName varchar(200),
size int,
maxsize bigint
)
INSERT #restoretemp EXEC (@query)
SELECT @Data = LogicalName FROM #restoretemp WHERE type = 'D'
SELECT @Log = LogicalName FROM #restoretemp WHERE type = 'L'
PRINT @Data
PRINT @Log
TRUNCATE TABLE #restoretemp
DROP TABLE #restoretemp
IF @File > 0
BEGIN
SET @query = 'RESTORE DATABASE ' + @TestDB2 + ' FROM DISK = ' + QUOTENAME(@BackupFile, '''') +
' WITH MOVE ' + QUOTENAME(@Data, '''') + ' TO ' + QUOTENAME(@DataFile, '''') + ', MOVE ' +
QUOTENAME(@Log, '''') + ' TO ' + QUOTENAME(@LogFile, '''') + ', FILE = ' + CONVERT(varchar, @File)
EXEC (@query)
END
My update query updates about 50 columns and they all have the sameformat: (Im using ADP to interact with the SQL Server)UPDATE dbo.GIS_EVENTS_TEMPSET VEH1TYPE =(SELECT VEHICLETYPEFROM VEHICLE AS AWHERE(GIS_EVENTS_TEMP.CASEID = A.CRASHNUMBER) AND(A.UNITID = 1)),VEH2TYPE = (....... same as above with UNITID = 2)VEH1DAM = (Same format different tables...)....nThe problem is that it's part of an import process that is dependent ondata from an outside source which come once a month.I found an error in one of the tables (a duplicate ID) which should notbe in the table this is causeing the "Subqurey returns more than onevalue" error.How can I guard against this..? If possible I would like it to onlyreturn the first value..I tried "COALESCE" but I couldn't get it to work I also tried "SELECTDISTINCT"....Any Ideas would be great.....
View 7 Replies View RelatedI execute an UPDATE statement using EXEC after I build it into a string:
@lcSQLString = 'UPDATE ' + @@mytable + 'SET x = y ...'
EXEC(@lcSQLString)
When the UPDATE fails, @@ERROR is nevertheless set to 0, because it returns the status of the EXEC command (which succedded) and not the @lcSQLString (which failed). At least, that is the explanation, I think. If I execute the statement directly by substituting the variables with their values, @@ERROR displays the correct value.
How can I capture @@ERROR within EXEC?
Thank you,
Aristotle
Is there some example of how i can add a return status into my stored procedure to have an extra field where I can verify if it runs successfully
1 if success
-1 if error (server, etc)
0 if empty record return
Thanks
As part of configuring my SQL Server 2005 box to be able to use the xp_cmdshell function, I ran sp_xp_cmdshell_proxy_account to set up the credentials:
sp_xp_cmdshell_proxy_account 'DomainDomainUser', 'password'
Unfortunately, it just returns:
Msg 15137, Level 16, State 1, Procedure sp_xp_cmdshell_proxy_account, Line 1
An error occurred during the execution of sp_xp_cmdshell_proxy_account. Possible reasons: the provided account was invalid or the '##xp_cmdshell_proxy_account##' credential could not be created. Error code: '5'.
I am assuming that this is an "Access Denied" error message. Has anyone got any ideas on why this is happening or what I can do to narrow down what the problem is. I can't find any logs with further information.
I have used a similar setup on another SQL Server 2005 box before and have never had a problem running the sp_xp_cmdshell_proxy_account function. I can't see what I have done differently this time.
Further information:
The SQL Server and SQL Server Agent services are running under the DomainDomainUser account.
I have given the DomainDomainUser the following privileges:
Act as part of the operating system
Log on as a batch job
Log on as a service
Replace a process level token
Let me know if you need any further information.
Thanks in advance for any help.
Ben
Hi All,
When I use the following I get an error because of duplicate records in my table.
Update person
Set username = (Select update_person
Hi All,
When I use the following I get an error. I think it is because of duplicate records in my table.
Update person
Set username = (Select username
From update_person
Where person.firsname = update_person.firstname
and person.lastname = update_person.lastname)
There are a few users that have the same first and last name. How can I ignore the duplicate records and continue to update the table?
Thanks in advance.
Guys,
could someone please tell me : am I supposed to use the OLE DB
Command in a dataflow to call a stored procedure to return a value? Or
is it just supposed to be used to call a straightforward insert
statement only?
What I am hoping to do:
I have a table with a few columns and one identity column. In a
dataflow I would like to effect an insert of a record to this table and
retrieve the identity value of the inserted record... and I'd like to
store the returned identity in a user variable.
If I AM supposed to be able to do this... then how on earth do I do it?
I have spent hours fooling around with the OLE DB command trying to call a stored proc and get a return value.
In the Advanced Editor any time I try to add an output column (by
clicking on Add Column) I just get an error dialog that says "the
component does not allow adding columns to this input or output)
So, am getting pretty concussed .. banging my head of the wall like this...
So put me out of my misery someone please.... is the OLE DB Command intended for this or not?
Thanks
PJ
I have the next code in my proyect:
If CurrentProject.IsConnected Then
MsgBox "Base ya Conectada.Procedemos a cerrarla primero", vbOKOnly
If SQLConexion.State = adStateOpen Then SQLConexion.Close
SQLConexion.Close
End If
SQLConexion.Open SQLSentencia
AbreConexionSQLSERVER = 0
If I detect that the connection is opened while I am initializazing varriables, I want to close always the connection and then begins my aplicattion always opening the connection, but it always returns a error 91..
suggestions?
I googled on the latter error number and got nothing back
Error: 0xC0048006 at Set Destination File, ActiveX Script Task: Retrieving the file name for a component failed with error code 0x016F9EA4.
The former only returns one result which does not explain my problem
Hi peoples,
I have created a custom CLR user define aggregate function based on the example that i found at http://msdn2.microsoft.com/en-us/library/ms131056(SQL.90).aspx.
It works great until i discovered that it will failed if i try to do either one of the following:
query a large records e.g: more than 4k records
has IS NULL in my where clause e.g: WHERE myConcatenatedFld IS NULL
Other than these two, it works perfectly fine.
Here is the error that i got:
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have attached the Concatenate class that i used in my UDAGG.
Code Snippet
using System;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlTypes;
using Microsoft.SqlServer.Server;
using System.IO;
using System.Text;
[Serializable]
[Microsoft.SqlServer.Server.SqlUserDefinedAggregate(
Format.UserDefined, //use custom serialization to serialize the intermediate result
IsInvariantToNulls = true, //optimizer property
IsInvariantToDuplicates = false, //optimizer property
IsInvariantToOrder = false, //optimizer property
MaxByteSize = 8000) //maximum size in bytes of persisted value
]
public class Concatenate : IBinarySerialize
{
/// <summary>
/// The variable that holds the intermediate result of the concatenation
/// </summary>
private StringBuilder intermediateResult;
private const int MAX_STRING_LEN = 4000;
/// <summary>
/// Initialize the internal data structures
/// </summary>
public void Init()
{
this.intermediateResult = new StringBuilder();
}
/// <summary>
/// Accumulate the next value, not if the value is null
/// </summary>
/// <param name="value"></param>
public void Accumulate(SqlString value)
{
//Dont do anything if the input is null or empty
if (value.IsNull || value.Value.Length == 0)
{
return;
}
//Skip concatenation if the output exceed 4000 chars
if (this.intermediateResult.Length + value.Value.Length > MAX_STRING_LEN)
{
return;
}
//Concatenate output
if (!this.intermediateResult.ToString().Contains(value.Value.Trim()))
this.intermediateResult.Append(value.Value.Trim()).Append(", ");
}
/// <summary>
/// Merge the partially computed aggregate with this aggregate.
/// </summary>
/// <param name="other"></param>
public void Merge(Concatenate other)
{
//Skip concatenation if the output exceed 4000 chars
if (this.intermediateResult.Length + other.intermediateResult.Length > MAX_STRING_LEN)
{
return;
}
//Concatenate computed output
this.intermediateResult.Append(other.intermediateResult);
}
/// <summary>
/// Called at the end of aggregation, to return the results of the aggregation.
/// </summary>
/// <returns></returns>
public SqlString Terminate()
{
string output = string.Empty;
//delete the trailing comma, if any
if (this.intermediateResult != null
&& this.intermediateResult.Length > 0)
{
output = this.intermediateResult.ToString(0, this.intermediateResult.Length - 2);
}
return new SqlString(output);
}
public void Read(BinaryReader r)
{
intermediateResult = new StringBuilder(r.ReadString());
}
public void Write(BinaryWriter w)
{
w.Write(this.intermediateResult.ToString());
}
}
Anyone has any idea on how to solve this issue?. Thanks
So, here is my expression that I use in a textbox on the site header. In the report it just returns error... any ides?
="Wareneingangsübersicht" + " " + today() + " / " +
iif(datepart("WeekdayName",dateadd("d",1,today()))= "Samstag", DateAdd("d",3,today()), DateAdd("d",1,today()))
I have a stored procedure that works when executed in query analyzer. (It is also way too long to post here) When called from my application ado.net returns the error:
Invalid object name #idTable
If I run the proc in query analyzer using the same parameters (copied from quickwatch while debugging) there is no error.
While very complicated, this procedure runs quickly so timing out is not an issue.
Does anyone know why a proc would run in query analyzer and not in an asp.net/c# application?
Thank you.
The Query:
Code:
AS
DECLARE@UPLIDCount int
DECLARE @OldUPLIDCount int
SELECT @UPLIDCount = (SELECT Count(UPLID)/1000 AS adjcount
FROM tblProvLicSpecloc
WHERE DelDate is null
OR DelDate > GETDATE())
IF EXISTS(SELECT var FROM tblDMaxVars WHERE var = 'UPLID Count')
BEGIN
SELECT @OldUPLIDCount = (SELECT var FROM tblDMaxVars WHERE var = 'UPLID Count')
IF @UPLIDCount > @OldUPLIDCount
BEGIN
UPDATE tblDMaxVars
SET value = '' + CAST((@UPLIDCount*1000) AS nvarchar(1000)) + ''
WHERE var = 'UPLID Count'
END
END
ELSE
BEGIN
INSERT INTO tblDMaxVars (var, value, description)
VALUES ('UPLID Count', '' + CAST((@UPLIDCount*1000) AS nvarchar(1000)) + '', 'counts UPLID records and rounds down to the nearest thousand')
END
GO
The table tblDMaxVars only has three columns, none of which are integers, yet I still return this error:
Code:
Syntax error converting the varchar value 'UPLID Count' to a column of data type int.
Please help.
I have a table that contains a column for a calcuated member (x) of type decimal number. When I tried to display the total of this calculated member in the table footer (=sum(x)), I am getting "#Error" instead of the sum of all displayed calculated values.
Column X
--------------
0
0.67
0.10
0.23
#Error (footer cell, expression -> =Sum(x))
=First(x), =Last(x) and =Max(x) worked fine, not sure why Sum failed. Please help...
Thanks.
I've written sql code which takes a date and finds the Last Day of the Month one year ago. For example, it takes the date '2015-04-17' and returns the date '2014-04-30'. The code works fine in a query. Now I'm trying to turn this into a function. However, when I try to create the function I get the error:
Operand type clash: date is incompatible with int
Why is this error being returned?
Here is my function:
CREATE FUNCTION dbo.zEOM_LY_D(@Input Date)
RETURNS date
AS
BEGIN;
DECLARE @Result date;
SET @Result = convert(DATE, DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,dateadd(m, -11, @Input)+1),0)),101)
RETURN @Result;
END;
I Installed SQL Reporting services 2012 service with sharepoint 2013 ... and started it with success..I followed the microsoft's procedure.. URL....After , I have not encountered any problems when I created the application <--- 3 databases created in my SQLSERVER instance//The problem occured when I tried to click on my ssrs application_name --> system settings...ERROR 500 Correlation ID: f6c5f49b-6ab0-4009-6f31-fd019ddc3ecc
This what I read in the log of sharepoint -->
01/14/2013 12:18:36.22 w3wp.exe (0x0BEC) 0x05D8 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request
(GET:http://vwaisql201202:22628/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=5abbbf0d-e8dd-4e8e-93d6-eddc77225a9f)). Parent No
[code]....
I got this error message while I was trying to backup the last transaction log before I start restoring a database that is marked SUSPECT. SQL Server is running on Windows 9x. Please how can I handle it because I can't even restore the db. Thanks for your help!
Server: Msg 4060, Level 16, State 1, Line 0
[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database requested in login 'Memphis. Login fails.
Connection Broken
hi,
i am getting following error, while connecting to sql server.
The specified table is existing in the database.
Unhandled database exception:
invalid object name 'table'
ODBC Retcode: -1
ODBC State: State:S0002,Native:208,ORigin:[microsoft]{odbc sql server driver][sql server]
Thank you
--Rk