Im receiving 'HY000 Connection is busy with results for another hstmt' when trying to insert. The reason is down to another hstmt with a cursor still open (as not all results have been fetched) against the same connection handle. My current design is one connect handle per file, with multiple statement handle depending on sql issued so i dont need to rebind.
I'm guessing, but is there a sqlsetconnectattr/sqlsetstmtattr setting to which will allow me to insert/update/delete to a file with a open cursor that may include the result ???
I apologize if this is not the correct forum for this posting. Looking at the descriptions, it appeared to be the best choice.
I am running Windows XP Pro SP2. I have installed the SQL Native Client for XP. However, when I try to add a new data source through ODBC Connection Manager, SQL Native Client is not listed as an option. I have followed this procedure on three other systems with no problems. What would be causing the SQL Native Client to not show up in the list of available ODBC data sources?
Why need to open CURSOR in the part in which a procedure is created?
The following codes are listed in the Microsoft SQL Server 2005 BOOKS ONLINE.
(1)
USE AdventureWorks; GO IF OBJECT_ID ( 'dbo.currency_cursor', 'P' ) IS NOT NULL DROP PROCEDURE dbo.currency_cursor; GO CREATE PROCEDURE dbo.currency_cursor @currency_cursor CURSOR VARYING OUTPUT AS SET @currency_cursor = CURSOR FORWARD_ONLY STATIC FOR SELECT CurrencyCode, Name FROM Sales.Currency; OPEN @currency_cursor;
GO
(2)
USE AdventureWorks; GO DECLARE @MyCursor CURSOR; EXEC dbo.currency_cursor @currency_cursor = @MyCursor OUTPUT; WHILE (@@FETCH_STATUS = 0) BEGIN; FETCH NEXT FROM @MyCursor; END; CLOSE @MyCursor; DEALLOCATE @MyCursor; GO
One of the people I have to support gets an error message when they are trying to use a SQL based application that was developed in house:
an error occured..microsoft odbc sql driver cursor type change. location frn main, load user () source is odbc
Unfortunately, the developer is not available to troubleshoot the issue and I do not understand it. I thought ODBC settings were static, so how could they cause a cursor to change?
Hello experts. Excuse my SQL newbie status. I was writing a stored procedure to crunch some data against an MS SQL 2000 database. I didn't entirely know what I was doing so I was using Crystal Reports 11 as an "application layer" pulling against a stored procedure. Well I guess ODBC connections don't support temp table output from stored procedures, or at least I don't know how to do it.
So I've rewritten my stored procedure so it inputs and outputs data using BCP, rather than just sending a simple select query.
My problem is that I cannot get CR to add the stored procedure back in to the report. Everytime I try I get an 'ODBC 24000 error - Invalid Cursor State.'
Where is this current set of records? How do I find it and close it? I've recreated my ODBC connection, every related table and SP to no avail. This is my crusial question.
Less crucial but helpful: How do I write an SP so it can be called from a report program like CR and will return its result set to the application? What's a good, simple "application layer" I can use if I'm doing all the logic in native SQL stored procedures? ASP.NET looks like a pain in the ass, and SQL Reporting Services requires Visual Studio .NET 2003. Is Perl my answer, since I can build web interfaces and forms in my sleep?
We are writing a C application that is using ODBC to insert recordsinto a database. We have a NOT NULL column that can legitimately havean empty value, i.e. we know the value and it is empty (i.e. a zerolength string).We are using SQLBindParameter() to bind a variable to theparameterized insert statement <<in the form: INSERT INTO table VALUES(?, ?, ?)>>. We are using SQLExecDirect() to process the SQL.We are running into the problem where ODBC is converts the empty (zerolength) string into a NULL value and this errors due to the fact thatthe column is defined as NOT NULL.We do not want to redefine the column as NULL, becasue myunderstanding of the correct usage of a NULL column is to indicatethat a value is unknown or meaningless... in our case we know thevalue (it is empty) and an empty value has meaning within ourapplication.I'm sure that this issue has been seen and address thousands(millions?) of times... any guidance would be appreciated.
I created very simple table with 3 columns and one is varchar(max) datatype
When i insert records thru VC++ ADO code i am getting this error
Exception Description Multiple-step OLE DB operation generated errors. Check e ach OLE DB status value, if available. No work was done. and Error Number:: -2147217887
Have just tried my sql server 2005 connected asp classic website on II7 for the first time and have gotten some errors. First off I have unchecked show friendly errors in IE and have enabled ASP to send error messages to the browser.
My error I get is when I execute a basic .asp page:
Microsoft OLE DB Provider for ODBC Drivers error '80004005' [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot open database "mydatabasename" requested by the login. The login failed. /index.asp, line 10 which is dbConnect.Open cstring
from this peice of code:
sub dbOpen() set dbConnect = Server.CreateObject("ADODB.Connection") cstring = "DSN=mysqldsn; Trusted Connection=yes" dbConnect.Open cstring end sub
I have gone into ODBC and have setup both a user dsn and file dsn that equals mysqldsn and points to my database (I know you only need to set up one DSN but I'm not sure which)
I also notice under mywebsite home panel there is a connection string option. Do I do anything with that?
STATIC Defines a cursor that makes a temporary copy of the data to be used by the cursor. All requests to the cursor are answered from this temporary table in tempdb; therefore, modifications made to base tables are not reflected in the data returned by fetches made to this cursor, and this cursor does not allow modifications
It say's that modifications is not allowed in the static cursor. I have a questions regarding that
Static Cursor declare ll cursor global static for select name, salary from ag open ll fetch from ll
while @@FETCH_STATUS=0 fetch from ll update ag set salary=200 where 1=1
close ll deallocate ll
In "AG" table, "SALARY" was 100 for all the entries. When I run the Cursor, it showed the salary value as "100" correctly.After the cursor was closed, I run the query select * from AG.But the result had updated to salary 200 as given in the cursor. file says modifications is not allowed in the static cursor.But I am able to update the data using static cursor.
Hello,I have a test database with table A containing 10,000 rows and a tableB containing 100,000 rows. Rows in B are "children" of rows in A -each row in A has 10 related rows in B (ie. B has a foreign key to A).Using ODBC I am executing the following loop 10,000 times, expressedbelow in pseudo-code:"select * from A order by a_pk option (fast 1)""fetch from A result set""select * from B where where fk_to_a = 'xxx' order by b_pk option(fast 1)""fetch from B result set" repeated 10 timesIn the above psueod-code 'xxx' is the primary key of the current Arow. NOTE: it is not a mistake that we are repeatedly doing the Aquery and retrieving only the first row.When the queries use fast-forward-only cursors this takes about 2.5minutes. When the queries use dynamic cursors this takes about 1 hour.Does anyone know why the dynamic cursor is killing performance?Because of the SQL Server ODBC driver it is not possible to havenested/multiple fast-forward-only cursors, hence I need to exploreother alternatives.I can only assume that a different query plan is getting constructedfor the dynamic cursor case versus the fast forward only cursor, but Ihave no way of finding out what that query plan is.All help appreciated.Kevin
I'm trying to implement a sp_MSforeachsp howvever when I call sp_MSforeach_worker I get the following error can you please explain this problem to me so I can over come the issue.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 31
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16958, Level 16, State 3, Procedure sp_MSforeach_worker, Line 32
Could not complete cursor operation because the set options have changed since the cursor was declared.
Msg 16917, Level 16, State 1, Procedure sp_MSforeach_worker, Line 153
Cursor is not open.
here is the stored procedure:
Alter PROCEDURE [dbo].[sp_MSforeachsp]
@command1 nvarchar(2000)
, @replacechar nchar(1) = N'?'
, @command2 nvarchar(2000) = null
, @command3 nvarchar(2000) = null
, @whereand nvarchar(2000) = null
, @precommand nvarchar(2000) = null
, @postcommand nvarchar(2000) = null
AS
/* This procedure belongs in the "master" database so it is acessible to all databases */
/* This proc returns one or more rows for each stored procedure */
/* @precommand and @postcommand may be used to force a single result set via a temp table. */
declare @retval int
if (@precommand is not null) EXECUTE(@precommand)
/* Create the select */
EXECUTE(N'declare hCForEachTable cursor global for
I get the below error only when my IDE open. It connects well when it is found closed. [SqlException (0x80131904): Cannot open user default database. Login failed.Login failed for user 'JPASPNET'.] I could solve this by giving the logged in windows user to impersonate under IIS window > WEBSITE > ASP.NET tab > EDIT CONFIG > APPLICATION tab But I wish someone could give me the proper solution. I almost tried all from giving ASPNET user as a administrator to configuring the same in Express management tool. Environment: XP pro, VWD and SQL Express
I got an approach like that: 1) Read something from DB - check the value, if true stop if false go on2) Read the second Value (another SQL Statement) - check the value etc. Now I could open the connection at 1) and if I have to go to 2) I leave the connection open and use the same connection at 2). Is it ok to do that? The other scenario would be opening a connection at 1), immediately close it after I read the value and open a new connection at 2). Thanks for the input!
Post installation of SQL Server 2014 Express edition, I am able to connect to the Database Instance.
But while opening a new query window in SSMS or opening a table getting the error:
Package 'RadLangSvc.Package, RadLangSvc, Version 12.0.0.0, Culture=Neutral, Public Token=89845dcd8080cc91' failed to load
Object reference not set to an instance of an object. (mscorlib)..Have already tried installing the componentsDACProjectSystemSetup_enu.msi, TSql LanguageService_enu.msi, DACFramework_enu.msi from path VS 2010 WCU DAC.
I am using SSIS 2014 with the below .net framework version and installed in Windows server 2012 R2 . I have installed my client's odbc drivers (both 32 bit and 64 bit) in my production server and created ODBC system DSNs for 32 bit and 64 bit.
When i open SSIS 2014 and tried to create the odbc connection but i can able to see only the 32 bit system DSN connection ,i can't able to see my 64 bit odbc system dsn connection.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.51650
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
And i installed my client odbc drivers(32,64 bit) and created ODBC system DSNs in my local system and when i open ssis 2014 and i can able to see both the ODBC system DSNS(32,64) connections from SSIS ODBC connection.
I am using below version of .net framework in my local system which was installed in windows 7 and i have SSIS 2012 also installed in my system and i can able to see both ODBC connections using 2012 as well in my local system.
Microsoft Visual Studio 2012 Shell (Integrated) Version 11.0.50727.1 RTMREL Microsoft .NET Framework Version 4.5.50938
SQL Server Integration Services Microsoft SQL Server Integration Services Designer Version 12.0.1524.0
why i can not see the ODBC 64 bit system DSN connection from SSIS in my production server ?
DECLARE DBCur CURSOR FOR SELECT U_OB_DB FROM [@OB_TB04_COMPDATA]
OPEN DBCur FETCH NEXT FROM DBCur INTO @DBNAME
WHILE @@FETCH_STATUS = 0 BEGIN
SELECT @SQLCMD = 'SELECT T0.CARDCODE, T0.U_OB_TID AS TRANSID, T0.DOCNUM AS INV_NO, ' + + 'T0.DOCDATE AS INV_DATE, T0.DOCTOTAL AS INV_AMT, T0.U_OB_DONO AS DONO ' + + 'FROM ' + @DBNAME + '.dbo.OINV T0 WHERE T0.U_OB_TID IS NOT NULL' EXEC(@SQLCMD) PRINT @SQLCMD FETCH NEXT FROM DBCur INTO @DBNAME
END
CLOSE DBCur DEALLOCATE DBCur
Part 2
SELECT T4.U_OB_PCOMP AS PARENTCOMP, T0.CARDCODE, T0.CARDNAME, ISNULL(T0.U_OB_TID,'') AS TRANSID, T0.DOCNUM AS SONO, T0.DOCDATE AS SODATE, SUM(T1.QUANTITY) AS SOQTY, T0.DOCTOTAL - T0.TOTALEXPNS AS SO_AMT, T3.DOCNUM AS DONO, T3.DOCDATE AS DO_DATE, SUM(T2.QUANTITY) AS DOQTY, T3.DOCTOTAL - T3.TOTALEXPNS AS DO_AMT INTO #MAIN FROM ORDR T0 JOIN RDR1 T1 ON T0.DOCENTRY = T1.DOCENTRY LEFT JOIN DLN1 T2 ON T1.DOCENTRY = T2.BASEENTRY AND T1.LINENUM = T2.BASELINE AND T2.BASETYPE = T0.OBJTYPE LEFT JOIN ODLN T3 ON T2.DOCENTRY = T3.DOCENTRY LEFT JOIN OCRD T4 ON T0.CARDCODE = T4.CARDCODE WHERE ISNULL(T0.U_OB_TID,0) <> 0 GROUP BY T4.U_OB_PCOMP, T0.CARDCODE,T0.CARDNAME, T0.U_OB_TID, T0.DOCNUM, T0.DOCDATE, T3.DOCNUM, T3.DOCDATE, T0.DOCTOTAL, T3.DOCTOTAL, T3.TOTALEXPNS, T0.TOTALEXPNS
my question is, how to join the part 1 n part 2? is there posibility?
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Hi all,I am having trouble getting linked Oracle 9 server in MS SQL Server2005 Express to work properly. My machine is running Windows XP.The Microsoft and Oracle OLE DB Providers have problems dealing withOracle's Numeric Data Type, so I decided to use Microsoft's OLE DB forODBC Provider and an Oracle ODBC source. When using the Microsoft ODBCfor Oracle Driver in my ODBC source I have inconsistent behavior.Sometimes my queries are processed properly, then other times I get thefollowing errorOLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttrfailed".OLE DB provider "MSDASQL" for linked server "ODBCBEAST" returnedmessage "[Microsoft][ODBC driver for Oracle][Oracle]".Msg 7303, Level 16, State 1, Line 1Cannot initialize the data source object of OLE DB provider "MSDASQL"for linked server "ODBCBEAST".I have no idea why sometimes I can connect to the linked server with noproblems andwhy other times it performs like this. I'm not changing anything aboutthe system I can think of. When I use an Oracle client (PL/SQL) I haveabsolutely no problems connecting. TNSPING returns that the connectionis good.This is unacceptable so I decided to try my luck with the Oracle 10gODBC driver. However when I use this and perform an openquery selectagainst the linked server I get back only 11 rows, when I know that thedatabase has over 100 rows (in fact when using the Microsoft ODBCdriver and it works that's what I get). I figured maybe the buffersetting needed to be raised in the ODBC configuration so I took it from64000 to 600000 (a magnitude of 10) but I still get back only 11 rows.I'm at my wit's end.Any suggestions on resolving one or the other problem would be muchappreciated.Thanks much
I'm new to cursors, and I'm not sure what's wrong with this code, it run for ever and when I stop it I get cursor open errors
declare Q cursor for select systudentid from satrans
declare @id int
open Q fetch next from Q into @id while @@fetch_status = 0 begin
declare c cursor for
Select b.ssn, SaTrans.SyStudentID, satrans.date, satrans.type, SaTrans.SyCampusID, Amount = Case SaTrans.Type When 'P' Then SaTrans.Amount * -1 When 'C' Then SaTrans.Amount * -1 Else SaTrans.Amount END
From SaTrans , systudent b where satrans.systudentid = b.systudentid
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
I having a difficult time here trying to figure out what to do here.I need a way to scroll through a recordset and display the resultswith both forward and backward movement on a web page(PHP usingADO/COM)..I know that if I use a client side cursor all the records get shovedto the client everytime that stored procedure is executed..if thisdatabase grows big wont that be an issue?..I know that I can set up a server side cursor that will only send therecord I need to the front end but..Ive been reading around and a lot of people have been saying never touse a server side cursor because of peformance issues.So i guess im weighing network performance needs with the client sidecursor vs server performance with the server side cursor..I am reallyconfused..which one should I use?-Jim
Just a quick question about connection management. My application willnever need more than 1 or 2 connections about at any given time. Also, I donot expect many users to be connected at any given time. For efficiency, Iwould like to keep connections alive throughout the lifetime of the objectsrequiring them, rather than opening a new connection, executing code andthen closing it again. What is the most efficient way of doing this?Should I perform the open/close or just one open when I create the objectand a close when I dispose of it?
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application. --------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I am trying to insert data into two different tables. I will insert into Table 2 based on an id I get from the Select Statement from Table1. Insert Table1(Title,Description,Link,Whatever)Values(@title,@description,@link,@Whatever)Select WhateverID from Table1 Where Description = @DescriptionInsert into Table2(CategoryID,WhateverID)Values(@CategoryID,@WhateverID) This statement is not working. What should I do? Should I use a stored procedure?? I am writing in C#. Can someone please help!!
I hope this is the appropriate forum for this question, if not then I apologize. I've got a SQL Server 2000 stored procedure that returns data to be used in a crystal report in Visual Studio 2005. Most of the stored procedure works well, but there is a point where I need to calculate an average number of days been a group of date pairs. I'm not familiar with cursors, but I think that I will need to use one to achieve the result I am looking for so I came up with the code below which is a snippet from my stored procedure. In this part of the code, the sp looks at the temporary table #lmreport (which holds all of the data that is returned at the end to crystal) and for every row in the table where the terrid is 'T' (the territory is domestic), it selects all of those territories from the territory table and loops through them to determine the date averages (by calling a nested stored procedure, also included below) for each territory and then updates #lmreport with that data. When I try to run the stored procedure, I get "The column prefix '#lmreport' does not match with a table name or alias name used in the query." on the line indicated. Does anyone have any idea what might be wrong or if this will even work the way I need it to? Thank you in advance.
I need some help with the concept of a Cursor, as I see it being used in a stored procedure I need to maintain. Here is some code from the stored proc. Can someone tell me what is going on here. I haveleft out some of the sql, but have isolated the Cursor stuff. Open MarketCursor -- How is MarketCursor loaded with data ? FETCH NEXT FROM MarketCursorINTO ItemID, @Item, @Reguest WHILE @@FETCH_STATUS = 0BEGIN
I have something like update table set field = ... where field = ... and for each entry that was effected by this query I want to insert an entry into another table. I have always done this with cursors is there a more effecient way? For some reason cursors run a lot slower on my sql2005 server than the sql2000 server...
hii have creted cursor but i want to use in my asp.net programming when some insert or delete command is work that time i want to excute my cursor how can i do that using asp.net with c# waiting for replaythanks
Hello: I am trying to define a cursor as follows: DECLARE EmployeeList CURSOR FOR dbo.GetRecord(@EmployeeID,@CurrentDate)Can't I use a UDF in the CURSOR FOR ?Help please.thank you.
