I ran into this problem trying to deploy an SSIS package to a development server. I tested by creating a simple SSIS package on the server itself. Two blocks an OLE DB Source block and an OLE DB Destination block. Two tables in the same database, one the source, the other the destination. Connection manager test connection works fine.
Package will execute from the IDE (locally on the development server), source block will read the table subcessfully, but when the destination block executes it fails and will stay yellow in the status screen. during the execution SQLDumper.exe is triggered. Analyzing the dump tells me:
(2b40.2938): Illegal instruction - code c000001d (first/second chance not available)
eax=04008010 ebx=00000004 ecx=00000010 edx=00000000 esi=00000940 edi=00000000
eip=7c82ed54 esp=0422f598 ebp=0422f608 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000297
An illegal instruction was hit.
This error exists when the destination block is either an OLE DB Destinaltion or a SQL Server Destination block and the SSIS application is executing locally.
Strangely enough if I run this same SSIS application from my development laptop it works fine against either my local datbase instance (on the laptop) or against the development server (App running on laptop, DB on development server).
I have scanned the forums and search engines for this type of error, so any assistance would be appreciated.
I am trying to create a table destination to excel which fails with the following error that " Table cannot be created " System Error in Field definition" where as the same works in the Falt File Destination. What could be the problem????
Hello, For packages where an MS Access database is the destination, what are some ways to detect whether or not the file is 'in use'? I know there is a lock file associated with Access databases. Could it be as simple as using something from the FileSystem Object to discover whether or not there is a lock file with the same name as the destination database? I'd like to stop the package if the file is in use.
The DTS works perfectly when I run it manually. However, when I run itas a job it fails. Before you ask if i'm running it under differentsecurity context. I have already made sure of that. I was logged intothe server through remote viewer, when I created and ran the package,as well as scheduling the job. So the accounts they're running underare consistent. They're the same accounts as the SQL Agent is runningunder and it's the sys admin account.The data source is a Fox pro database with a pull of two tables. I amusing Microsoft OLE DB Foxpro driver as my source connection and OLE DBConnection for SQL Server as my destination. I am doing a simple tableto table transformation. The path of my connection is a mapped Drive:E:Main. There are other packages and jobs within my job queue that arepointing to the same database and they seem to run fine using the abovemapped drive. The ONLY difference between this package and otherpackages are that, they're few months old and this one was created lastnight. I have also enabled logging on this package and here is thebelow error when the job fails:Package Steps execution information:Step 'DTSStep_DTSDataPumpTask_1' failedStep Error Source: Microsoft OLE DB Provider for Visual FoxProStep Error Description:Invalid path or file name.Step Error code: 80040E21Step Error Help File:Step Error Help Context ID:0Step Execution Started: 9/23/2006 11:39:17 AMStep Execution Completed: 9/23/2006 11:39:17 AMTotal Step Execution Time: 0.031 secondsProgress count in Step: 0
It may sound like a newb question and if thats the case, I'm really sorry, but I would like to know if something like this is possible....
Lets say I have a table called TestA on a database DBA on a ServerA and I have an another table called TestB on a database DBB on a ServerB Now each of these table has a a field Id, to make an INNER JOIN between these two tables, taht are located on two different server on two differents database...Is it possible? and if so what would be the SELECT instruction to do it? Thanks for taking the time to read this :)
Hi, I have such a problem:I try to update (or insert) a row in my table and i fail althought i,ve read many posts here. I.ve created a button and "on_click" event to this button and want that event to update or insert a record in my table. I wrote: protected void selectButton_Click(object sender, EventArgs e) { String taskID = projectsGridView.SelectedRow.Cells[0].Text; usersSqlDataSource.UpdateCommand = "update [Users] set [TaskID]=@task where [UserID]=1"; usersSqlDataSource.UpdateParameters.Add("task", taskID); usersSqlDataSource.Update(); } The application creates error in the last line of code (usersSqlDataSource.Update();) and i receive such an error:You have specified that your update command compares all values on SqlDataSource 'usersSqlDataSource', but the dictionary passed in for oldValues is empty. Pass in a valid dictionary for update or change your mode to OverwriteChanges. For me it looks like there is a problem while setting parameters. Shall i change some properties of the sqlDataSource or GridView? Please help..
Hi Has anyone come across SQL Server giving errors like A row on 'page 52995' was accessed that has illegal length of 0 in database? I believe that it is due to some data on the page has been corrupted. Is there a way to prevent such problem? Can daily backup be able identify such problem?
I have a user who registered with the name "#1baseballer" in my asp.net membership database. Now when I try to manage his account using my administration utility I receive "Object reference not set to an instance of an object error". Is this because of his chosen user name and can I fix this in my code?
i'm trying to figure out a way to replace a handful of "Illegal" characters in our SQL tables. We are using Project Server and some of these characters are causing errors or other issues in OLAP Cube.
I'm trying to figure out a way to change the following characters to an underscore ( _ ) :
illegal characters are: / ( ) . , ' : - &
Can I just create a SQL query that loops through a column to replace all of these characters at once? or do I have to replace one character at a time?! I tested replacing one at a time and it works with the REPLACE function.
I'm not all that familiar with MSSQL, I've spent past few years working with MySQL instead.
how can my query loop? or would using CASE help me out?
thanks. any feedback is much appreciated. If you need to know more, let me know.
We are using a microsoft small bussiness server. One of our workstations get an mgrntw illegal operation error sometimes when doing an invoice in pastel premier. Does anyone know what can cause this problem and how can I fix it? The server run on windows 2000 and the workstations all use windows 98SE. This problem does not happen everyday. I formatted that computer, hoping the problem will go away but after 3 weeks it suddenly appeared again. I am not sure what version our mgrntw.exe is.
I have a illegal keyword table name as "Illegal_keyword_Master" where near about 2000 illegal keyword are stored... Now I have a big Sentence(bunch of words)...
If any illegal is keywords is found from "Illegal_keyword_Master" table in that sentence then the sentence is "banned" otherwise the sentence is "OK"....
I'm trying to execute a simple VBS file from the Executable command line in the Execute Process Task Editor.
My line is this : cscript.exe "c:convertcsvssisXlsToCsv.vbs"
SSIS keeps saying there are illegal characters here. Â I've Googled and looked about 20 articles and I can't resolve it.
I have a ForEach that loops through Excel files and changes them to CSV files using code i found. This script takes an original Excel file and transfers it to a new CSV file in a new directory.
So in DOS at the CMD line I would type : XlsTocsv.vbs originalfile.xls newfile.csv
I have the original file and new file in the Arguments line so I'm assuming that after the script executes it will look at the filepaths in the loop and loop through them so I want it do to this when it runs:
XlsTocsv.vbs [User::@ExcelFile] [User::@CSVFile]
I just can't get it to execute and I keep getting illegal characters. Â
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
We are trying to install the Standard Edition of SQL Server 2005. We already have SQL Express installed. Standard won't install and Express won't uninstall.
We have tried every suggestion we can find and some we made up. When we try to install Standard, we get to the bit where you choose what you want to install and the only thing available is workstation components.
There are so many cases of this on the Internat that I can't believe MS have not solved the issue. And I am stunned that they want to charge us more money to talk to us about how to fix something we just paid them an arm and a leg for!
What do I need to tell you to get some idea of where to go next with this?
I am trying to find a way within SSIS either automatically or manually/programmatically to allow an application to call the SSIS package for ETL and output the results to a destination specified 'on the fly' by the application.
I searched, but couldn't find anything to match what I am looking for...
Basically, is there any way to tell DTS to create a new table each time that the backup is run? I am scheduling the backup for 1 hour intervals for 5 days, but need the databases that are backed up to be unique, so i would end up wiht 120 of them total.
Is there any way to do this through DTS? Or am I hosed?
I am using the SCD task, and noticed that the OLE DB Destination it generates does a "SELECT * FROM" from the destination table when i run my package (found this in trace). Now if this happens on a 20 000000 row destination table with computed fields on it, a lot of resources are wasted. Is there a way around this behaviour i.e. no select is done for the insert destination?
I am making good progress with my ssis package. However, there is one new thing which I cannot graps yet. That is, how to use variables when I want to update or insert a new row. I have some columns in my tables that require the datetime that the update/insert occured, the person making the change, and a few other things that are not part of the incoming data source (an excel file).
I created some user variables for these things, but I cannot figure out how to use them with my OLE DB Command and OLE DB Destination. One handles Inserts and the other handles the Updates based on whether a row in the Excel file is new (an Insert) or already exists (an update). Along with the insert or update, I'd like to set the Lastupdate, Who, etc.
[SQL Server Destination [16]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Could not bulk load because SSIS file mapping object 'GlobalDTSQLIMPORT ' could not be opened. Operating system error code 2(The system cannot find the file specified.). Make sure you are accessing a local server via Windows security.".
I'm trying to do a simple upload to a production server from an Access mdb of the kind I used to do routinely in DTS. Any ideas?
when loading the transformed data into OLE DB destination, there is no options to truncate destination table first. Have to insert a middle step to run script to truncate the destination table first.
I'm very confused. We even has the options of keeping or deleting the data in destination table in SQL2000 DTS package. Why we don't have this option in SQL2005??
Does an empty file (text/ Excel) needs to be created manually for the connection manager for (text/excel)destinations. Can I create the file at run time?????
I have an OLE DB destination which should insert data into a table named in an SSIS variable. When I run the package, I don't get any errors and I have a data viewer which shows that the data is reaching the OLE DB destination. However, the data isn't being inserted into the destination table.
Can someone suggest how I should go about debugging this?
I have been given a requirement to post data to a Peoplesoft Http gateway, using SSIS.
To be completely honest I havn't got a clue where to start with this, can anybody give me any pointers? Am I going to have to use a script component? Are there any decent examples / samples.
Sorry about the open nature of this question, but I really dont know where to start.
I think Biztalk may be a better option as in integration tool for this work.
Inside my dataflow task, I've got 5 OLEDB Source components pulling data in from various SQL Server Instances.
I have an OLEDB Destination pointing to a single table that should receive all of records create by the combination of Merge Joins of these five sources.
Right now I'm working with a set of test data, and I've got 8 records coming through after all of my merge joins filter things out.
The problem I am seeing is that my OLEDB Destination turns yellow and then just sits there. I've looked in my Progress (Execution Results) tab when I run the package, and there's nothing alarming there.
I've run SQL Profiles on the database table I'm trying to insert data into. Nothing.
I've also change the destination from 'Table or view - fast load' to 'Table or view' . I've unchecked the table lock option for fast load. No dice.
The only thing I can say I've seen that looks suspicious is that I have added some data views between data flow components just before the data gets to the OLEDB Destination and a few of the fields in the data view will show <Missing LineageID> in the field rather than the value. I removed all of the columns that were behaving this way from the flow just to see if that was the problem or if, by removing these fields, I was able to get data to write to the table. This did not work. It does leave me wondering though.
Anyone have any idea why this might be happening or have had similar behavior?
Any help/ ideas of things to check would be greatly appreciated.
