OLE DB MSOLAP Provider Issues
Nov 27, 2007
Im unable to create a link server to remote SSAS servers. Error Below.
TITLE: Microsoft SQL Server Management Studio
------------------------------
"The linked server has been created but failed a connection test. Do you want to keep the linked server?"
------------------------------
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
Cannot set the initialization properties for OLE DB provider "MSOLAP" for linked server "Source".
OLE DB provider "MSOLAP" for linked server "Link Server Name" returned message "The following system error occurred: Key not valid for use in specified state. .". (Microsoft SQL Server, Error: 7373)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.3042&EvtSrc=MSSQLServer&EvtID=7373&LinkId=20476
------------------------------
BUTTONS:
&Yes
&No
------------------------------
I tried to creating a UDL file and I get this error..
Test connection failed becasue of an error in setting the window handle property.
I tried reinstalling Driver .. no luck.
Ensured that allow in process was checked in provider properties.
Also checked SAC manager to ensure "allow to" and "allow from" link was set to true on source server.
Oh ya... I was aslo able to create a test UDL on my XP workstation with no problem..
Any help much appreciated.
View 9 Replies
ADVERTISEMENT
Jun 9, 2008
Hi,I have a stored procedure that makes an MDX query for me, on SQL 2000, service pack 3 it works fine, but on service pack 4 it stops working with the error:Server: Msg 7399, Level 16, State 1, Line 1OLE DB provider 'MSOLAP.2' reported an error. The provider did not give any information about the error.OLE DB error trace [OLE/DB Provider 'MSOLAP.2' ICommandPrepare::Prepare returned 0x80004005: The provider did not give any information about the error.].and i'f i call @@Error I get the error number 7399.Any ideas as to what might be going on? The stored procedure which worked prior to service pack 4 is as follows:CREATE PROCEDURE MDXTester
(
@CustId Varchar(4)
)
AS
IF NOT EXISTS(SELECT * FROM master..sysservers where srvname = 'CZVCube')
BEGIN
EXEC sp_addlinkedserver 'CZVCube',
'',
'MSOLAP.2',
'10.0.41.128',
'CZV'
END
DECLARE @OPENQUERY nvarchar(4000), @MDX nvarchar(4000), @LinkedServer nvarchar(4000)
SET @LinkedServer = 'CZVCube'
SET @OPENQUERY = 'SELECT * FROM OPENQUERY('+ @LinkedServer + ','''
SET @MDX = 'WITH
MEMBER [Measures].[YTD NV] AS ''''Sum(YTD(),[Net Value])''''
MEMBER [Measures].[YTD Prev] AS ''''Sum(YTD(),([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember)))''''
MEMBER [Measures].[YTD Change] AS ''''[Measures].[YTD NV] - [Measures].[YTD Prev]'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[YTD Change Perc] AS ''''[Measures].[YTD Change] / [Measures].[YTD Prev]'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[Monthly Change] AS ''''[Net Value] - ([Net Value],FiscalYear.PrevMember)'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[Monthly Change Perc] AS ''''([Monthly Change] / ([Net Value],FiscalYear.PrevMember))'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[Annual Change] AS ''''[Net Value] - ([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember))'''', FORMAT_STRING = ''''###,###.00''''
MEMBER [Measures].[Annual Change Perc] AS ''''([Annual Change] / ([Measures].[Net value], ParallelPeriod([Fiscal year], 1, [FiscalYear].CurrentMember)))'''', FORMAT_STRING = ''''###,##0.0%''''
MEMBER [Measures].[12 mth mov av] AS ''''Avg([FiscalYear].CurrentMember.Lag(11):[FiscalYear].CurrentMember, [Measures].[Net Value])''''
SELECT {[Measures].[Net Value] , [Measures].[YTD NV], [Measures].[YTD Prev],[Measures].[Monthly Change], [Measures].[Monthly Change Perc], [Measures].[Annual Change], [Measures].[Annual Change Perc], [Measures].[YTD Change], [Measures].[YTD Change Per
c], [Measures].[12 mth mov av]} ON COLUMNS,
LastPeriods(12, [FiscalYear].[Apr 08]) ON ROWS
FROM CZV
where [C_CRMID].[' + @CustId + ']'
EXEC(@OPENQUERY + @MDX + ''')')
View 1 Replies
View Related
Jul 20, 2007
I have an Openrowset query, which connects to a cube and obtains the data in a table. This is run every day. This process has been running for over a year but now all of a sudden doesn't work and gives the erros mentioned below. When I reduce the records to be returned to about 1/4, then it runs fine else not. We are using Enterprise Version. Any help will be really appreciated.
Error when tried once -
OLE DB provider 'MSOLAP' reported an error. The provider ran out of memory.
[OLE/DB provider returned message: An error occurred during attempt to get a cell value.]
[OLE/DB provider returned message: The operation has failed because of an error in the COM component - unknown error ]
OLE DB error trace [OLE/DB Provider 'MSOLAP' IRowset::GetNextRows returned 0x8007000e: The provider ran out of memory.].
The second time I received -
ODBC: Msg 0, Level 19, State 1
SqlDumpExceptionHandler: Process 77 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
[OLE/DB provider returned message: An unexpected internal error has occurred.] [Microsoft][ODBC SQL Server Driver]Function sequence error
Thanks,
Saurav
View 1 Replies
View Related
Feb 27, 2004
Hi
If anybody knows who is giving training for MSOLAP anywhere in india Pl geve me the address
My emailid sudhakarraaj@yahoo.co.in
View 14 Replies
View Related
Mar 12, 2001
Jonathan Yang Jonathan.Yang@Weyerhaeuser.Com
How to launch MSOLAP cube processing in batch mode?
================================================== =
When one wants to run SQL Statement or Stored procedure in batch mode, OSQL.exe can be used.
Now we have created OLAP cube and want to process(populate) cube. From MSOLAP Analysis manage we can right click a cube name then click “Process”. But how to do this in batch mode? I.e. any equivalent thing of OSQL.exe to help process cube?
I believe a matured tool should work good in both interactive and batch mode. Unfortunately I did not find how to launch cube processing from MS OLAP documents. Looks like we have to write one using DSO supplied by Microsoft. Do you know if there is any tool for us not to write one? Pls help.
View 1 Replies
View Related
Feb 27, 2007
Is it that I have a syntax error in the nested OPENQUERY or is there another issue? Do I need to specify a different provider in the Server Link such as OLEDB? Non-nested OPENQUERYs work fine.
I'm generally following theTips and Tricks article.
"Executing predictions from the SQL Server relational engine". One problem is the sample doesn't actually complete the example query after the second nested OPENQUERY call.
e.g.
SELECT * FROM OPENQUERY(DMServer,
'select €¦ FROM Modell PREDICTION JOIN OPENQUERY€¦')
The SQL Server server link's provider is configured to allow adhoc access. I appears that the inner OPENQUERY cannot be prepared by Analysis Server or the Server link provider? but I need to return a key value t.[CardTransactionID] for joining to SQL Server data elements.
OLE DB provider "MSOLAP" for linked server "DMServer" returned message "Errors in the back-end database access module. The data provider does not support preparing queries.".
Msg 7321, Level 16, State 2, Line 2 An error occurred while preparing the query
SELECT * FROM OPENQUERY(DMServer,
'SELECT
t.[CardTransactionID],
t.[PostingDate],
[Misuse Abuse Profile].[Even Dollar Purchase],
PredictProbability([Misuse Abuse Profile].[Even Dollar Purchase]) AS Score,
PredictSupport([Misuse Abuse Profile].[Even Dollar Purchase]) AS Suppt,
t.[BillingAmount]
FROM
[Misuse Abuse Profile]
PREDICTION JOIN
OPENQUERY([Athena Dev],
''SELECT
[CardTransactionID],
[PostingDate],
[BillingAmount],
[AccountNumber],
[SupplierStateProvinceCode],
[MerchantCategoryCode],
[PurchaseIDFormat],
[TransactionTime],
[TaxAmountIncludedCode],
[Tax2AmountIncludedCode],
[OrderTypeCode],
[MemoPostFlag],
[EvenDollarPurchase]
FROM
[dbo].[vMisuseAbuseProfile]
'') AS t
ON
[Misuse Abuse Profile].[Account Number] = t.[AccountNumber] AND
[Misuse Abuse Profile].[Supplier State Province Code] = t.[SupplierStateProvinceCode] AND
[Misuse Abuse Profile].[Merchant Category Code] = t.[MerchantCategoryCode] AND
[Misuse Abuse Profile].[Purchase ID Format] = t.[PurchaseIDFormat] AND
[Misuse Abuse Profile].[Transaction Time] = t.[TransactionTime] AND
[Misuse Abuse Profile].[Tax Amount Included Code] = t.[TaxAmountIncludedCode] AND
[Misuse Abuse Profile].[Tax2 Amount Included Code] = t.[Tax2AmountIncludedCode] AND
[Misuse Abuse Profile].[Order Type Code] = t.[OrderTypeCode] AND
[Misuse Abuse Profile].[Memo Post Flag] = t.[MemoPostFlag] AND
[Misuse Abuse Profile].[Even Dollar Purchase] = t.[EvenDollarPurchase]
')
In desparation I tried returning the case key (CardTransactionID) and the predictive column elements but I get an error when I try that. I assume this is a no-no?
OLE DB provider "MSOLAP" for linked server "DMServer" returned message "Error (Data mining): Only a predictable column (or a column that is related to a predictable column) can be referenced from the mining model in the context at line 2, column 15.".
View 4 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 2 Replies
View Related
Nov 28, 2006
Hi all,
While working on the Integration Services project.
When I try to create a new Data Connection in Connection Managers for ADO .NET SAP Provider, it gives the following exception:
TITLE: Microsoft Visual Studio
------------------------------
Could not set the connection qualifier for the current connection.
------------------------------
ADDITIONAL INFORMATION:
Could not create a connection for the provider invariant name 'Microsoft.Adapters.SAP.SAPProvider'. Verify that this provider is installed correctly on this computer. (Microsoft.DataTransformationServices.Design)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=CouldNotCreateConnection&LinkId=20476
------------------------------
Object reference not set to an instance of an object. (Microsoft.Adapters.SAP.SAPProvider)
------------------------------
BUTTONS:
OK
------------------------------
Can anyone describe, what is the resolution for the same.
View 1 Replies
View Related
Jan 23, 2007
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
I am getting this error and using this connection string
Data Source=192.168.0.100;Network Library=DBMSSOCN;Initial Catalog=ENet;User ID=eonline;Password=eonline;
What can be solution for this.
View 4 Replies
View Related
Mar 10, 2008
Hi, I am working on VS 2005 and using SQL 2005 Express and i am processing excel files and inserting records in data base as i processing starts and almost after processing 600 i got this error provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server. how can i solve that thanx
View 3 Replies
View Related
Apr 15, 2008
Hi,
My .NET 2005 application is on a server outsite company's domain. SQL server is in domain and port for sql server is open. TCP/IP is set for remote connection in SQL Server. Connection string in .config is
<add name="X_Conn" connectionString="Data Source=XXX;Initial Catalog=XXX;User ID=XX; Password=XXX;" providerName="System.Data.SqlClient"/>
I receive the error below:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
thanks a lot in advance!
View 3 Replies
View Related
Apr 26, 2007
We just changed the dev environment to sqlagent. From then we were unable to see the reports on the report server because:
An error has occurred during report processing.
Cannot create a connection to data source 'IHRSDataSource'.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
this error is cropping up.
To Resolve this issue, we checked the Surface Area Configuration and also checked the Reporting Service Configuration . There seem to be no problem and everything looks ok.
Please help me in resolving this issue.
View 4 Replies
View Related
Apr 14, 2007
After I installed the various service packs via Windows Update, my WindowsForms application can no longer connect to the server.
The error message is:
provider: Named Pipe Provider, error: 40 - Could not open connection to SQL server.
However, the Reporting Services work just fine.
Please help.
View 1 Replies
View Related
Mar 17, 2008
Hi to all,
We have 4 client machine and 1 server machine, that server have all the sql server 2005 database€™s.
A project developed from client1 with Asp.net 2005 now I need to access that project from client2 so I type http://My Ip address/Folder Name/home.aspx in my browser here when the sql connection is open(SqlConnection.Opn()) then I meet this problem
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Please reply me.
View 1 Replies
View Related
Feb 20, 2006
Hi All,
I am new to dotnet. I tried connecting to the database MS SQL Server 2000. I gave the code like, the one below, in form load event,
SqlDataReader dr = null;
SqlConnection myConnection = new SqlConnection("Data Source=IP;Initial Catalog=name;User Id=uid;Password=pwd;");
myConnection.Open();
myConnection.Close();
But I could not connect. The error message highlights the line myConnection.Open() and displays the error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
It tries connecting to SQL Server 2005. There is no SQL Server 2005 in that system. There is only SQL Server 2000.
I have the aspx code in my local system and the database in another machine.
Could Someone please help me out in solving this problem.
Thanks,
Arun. S
View 26 Replies
View Related
May 20, 2008
hi all
I realised this has been done to death, and so much information out there but I am still in a quandry.
I have had to rebuild my computer.
This is what I did
XP machine
using SQL Server 2005 Standard Edition
using Windows Authentication
NZ6(MSSQLSERVER)
straight default install all the way
unfortunately when ready to run reports from my instance(computer)
I received the error as in provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
thought I had it all okayed but obviously something not right
so ended up unistalling then - did the following:
Load SQL Server from disc1 and start install
failed on alter Counter Registry key error
fixed this from KB article (known error that can happen)
restarted
Went to Windows Update
check IIS is installed - tick is on - IIS - admin tools - make sure asp2 is associated - yes ok
Then back to install sql server - there is no instance set up yet
Disk 2 and setup .exe
All ok on Reporting Services, Analysis etc.
But once again all seems fine but still getting the error:
connection is all fine in Management Studio - eg I can see tables etc
connection is all fine in Business Intelligence - eg I can preview my reports
I then can deploy up to - NZ6
open NZ6
eports
report is there fine - but just errors
some simple little tick that I have not done!!
I seem to have checked and rechecked everything and obviously doing another re-install does not seem a logical step from here.
I will continue to check but if someone jump in and advise please would be great.
cheers
jewel
View 6 Replies
View Related
Oct 15, 2007
Hi
I am creating a web site using Visual Studio 2008 & trying to connect to database on SQL Server 2000. My test connection is successful but while debugging the page I am getting this error :
" provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server "
Your suggestions on that will be appreciated.
Thanks
Ashok
View 5 Replies
View Related
Aug 27, 2007
Guys!
has MS done Anything about this issue? I am running NT2K and have the same issue y'all having
provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server
Does anyone have a fix or a workaround that will work once the application goes live?
View 1 Replies
View Related
Apr 3, 2007
Hi,
Am getting the followning error:
{"An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)"}
from my application where 3 service references had been added
and hav added this segment in app.config file
<configSections>
<section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=null" />
</configSections>
<dataConfiguration defaultDatabase="Connection String" />
<connectionStrings>
<add name="Connection String" connectionString="Data Source=DPA1W075Binstancename;Initial Catalog=SoapBox;Integrated Security=SSPI;"
providerName="System.Data.SqlClient" />
</connectionStrings>
Solutions recommended for this were start running the SQL browser instance and enable Namespipes in Sqlserver configuration manager.Did both.. but nothing worked.
Still getting the same error..
Can somebody plz help me?
View 2 Replies
View Related
Jul 21, 2007
Hi guys, I have a problem with error: 40.
I made a Web page, and it works perfect on my local machine, everything is OK, until I uloaded page to the server, it reports this error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.WebControls.Repeater.GetData() +50
System.Web.UI.WebControls.Repeater.CreateControlHierarchy(Boolean useDataSource) +232
System.Web.UI.WebControls.Repeater.OnDataBinding(EventArgs e) +53
System.Web.UI.WebControls.Repeater.DataBind() +72
System.Web.UI.WebControls.Repeater.EnsureDataBound() +55
System.Web.UI.WebControls.Repeater.OnPreRender(EventArgs e) +12
System.Web.UI.Control.PreRenderRecursiveInternal() +77
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
I dont't Know what to do. Please HELP!
View 6 Replies
View Related
Dec 1, 2007
Hi all,
I am currently on XP x64 and am trying to run a .vbs file, which needs access to an access file when the following error pops up:
"Provider is not specified and there is no designated default provider"
error code: 800a0ea9
source: ADODB.Connection
I have tried a bunch of stuff, but so far nothing has worked.
The following code is is question:
set AccessDB = CreateObject("ADODB.Connection")
AccessDB.Open("DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & sMSAccessDBPath)
any help would be appreciated......could I run this with cscript.exe (in the WoW64 folder) in through cmd.exe?
Thanks in advance for you help.
Jonathan
View 1 Replies
View Related
Apr 4, 2008
I've just posted mywebsite andthis error keep being trhrown as soon as I access the DB
I dont understand what is going on and if I dont get it working bu today will delivery date will expire and I will get in trouble...
So anyone knows what is going on
It says the following:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here is my con string :
<add name="ASPNETDBConnectionString" connectionString="Data Source=p3swhsql-v09.shr.secureserver.net;Initial Catalog=myCatalog;User ID=MyID;Password='Mypassword"/>
Thanks a lot
View 4 Replies
View Related
Oct 22, 2006
I am getting the following error when i try to connect to the my web site using froma different server. A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) i am using sql express and i attach the database through the connection string in the web config. Any ideas
View 1 Replies
View Related
Jun 26, 2007
Hi,
After reading this helpful blog entry:
http://blogs.msdn.com/sql_protocols/archive/2007/05/13/sql-network-interfaces-error-26-error-locating-server-instance-specified.aspx
I think this might be a good place to ask the following question.
I am writing the error handling code for my data access layer for a web application. I am using the Enterprise Library Data Access Application Block. Although this supports generic database connections, I realized that I need to handle errors specific to each database type. Microsoft SQL is the only database type I am using for now, so I am using a try...catch (SqlException e).
In testing my code, I intentionally changed the instance name in web.config to a name that does not exist. I get the very popular error 26 - Error Locating Server/Instance Specified. This is returned as a SqlException, but the SqlError.Number property is set to -1.
Am I getting "-1" because the provider hasn't actually connected to SQL yet, so it doesn't have an actual SQL error number?
Can I assume that (SqlError.Number == -1) is always a fatal, provider-level connection exception?
Will the provider ever use another SqlError.Number of its own? Or do all numbers besides -1 come from the SQL sysmessages table?.
Is there a comprehensive list of what exceptions might be raised by the SqlClient provider, including #26?
The reason for all the questions is that in a web application, I want to prevent the end-user from seeing the "real" exception if it has to do with configuration errors. However, maybe there are other errors that the user should see and handle? It's hard to know without a full list of SqlClient provider errors, along with the SqlError.Number that each error maps to.
Thanks and regards,
Mark
View 6 Replies
View Related
Mar 13, 2006
I am new to SSIS but I am learning fast. Any help is greatly appreciated.
I have written a custom log provider derived from LogProviderBase. I want to programmtically add the custom log provider to my package, but when I try this:
myPackage.LogProviders.Add("ACustomLogProvider");
I get the following exception:
"The log provider type "ACustomLogProvider" specified for log provider "{..GUID..}" is not recognized as a valid log provider type. This error occurs when an attempt is made to create a log provider for unknown log provider type. Verify the spelling in the log provider type name".
I have followed the instructions in BOL and as suggested in this forum, adding the DtsLogProvider attribute:
[DtsLogProvider(DisplayName="ACustomLogProvider", LogProviderType="ACustomLogProvider", Description="a description")]
Another way I tried is that I added a GUID attribute to my custom log provider class and then tried this:
Type aType = typeof(ACustomLogProvider);
Guid aGUID = (Guid)aType.GUID;
myPackage.LogProviders.Add("{"+ aGUID.ToString() +"}");
This also gives me the same exception "The log provider type ""{..the actual GUID for ACustomLogProvider..}" specified for log provider "{..a different GUID..}" is not recognized as a valid log provider type....
My questions are: Is it possible to add a custom log provider programmtically or must it be done through the SSIS Designer?
Must I deploy my custom log provider class for it to work programmatically? (I had perhaps wrongly assumed I would not have to deploy if I don't want it to show up in the SSIS Designer).
I would prefer to use a custom log provider instead of just logging within the SSIS event handlers because I can override the OnPostExecute, etc. but I cannot (can I?) override the specific event handlers like PackageStart, PackageEnd, etc because they are not exposed through DTSEvents.
Any help I would be very grateful for. Thanks.
View 8 Replies
View Related
Oct 10, 2007
I have an ODBC connection setup for Oralce RDB. This works fine in say MSAccess. Now I would like to add a SQL Server Linked Server to this ODBC driver (it is for RDB not regular Oracle), but I am not able to get this to work. What is the Provider String and Location / Catalog for using this type of ODBC? I setup DSN as 'name', Provider String as 'UID=user;PWD=pass;' and it seems it tries to connect but gives an error. "%SQL-F-SCHNOTDEF, Schema USER is not defined"
Any help is greatly appreciated.
View 3 Replies
View Related
Sep 14, 2007
Hi guys, I recently developed a website for one of my client and today client report that i face random error sometime when i access some pages.The complete error description are shown below.A transport-level error has occured when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available. Can any one told me from which reason this error generated and how to resolve it, Client host website on shared hosting plan and uses SQL SERVER 2005 as database management system.Thanks.
View 1 Replies
View Related
Jan 31, 2006
I am using OleDbMicrosoft OLE DB Rpovider for Visual FoxPro for my Data Source Connection and it includes the deleted records from the Visual FoxPro database, how can it have it ignore the deleted records?
HELP!
Thanx
Moshe
View 5 Replies
View Related
May 14, 2008
I try to connect to a SQL Server 2005 Express Edition via IP address. But anytime the application tries to connect to the database here is th error message I receive:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)
There is the connection String code:
"Data Source=192.168.1.109,1433;Network Library=DBMSSOCN;" & _
"Initial Catalog=myDataBase;" & _
"UserID=Username; Password=Password;"
Already checked
I have enabled the TCP/IP under SQL Server,
Under SQL Server Configuration Area, I have chosen the option Local and remote connection: TCP/IP only
I have verified that my firewall allows SQL remote and a Local Connection.
Now I don't know where to look or what I have to fix to continue. I will really appreciate if somebody can help me.
Thank you in advance.
AA
View 12 Replies
View Related
Aug 22, 2005
i just bought a brand new server and put windows server 2003 x64 sp1 on it then put sql server 2000 sp4 on that and set up a trusted odbc connection. however, it gave me the following error:
View 5 Replies
View Related
Jan 28, 2008
Hi I always get good reply from u all, thank you,
I have copied my asp.net website from one server to another. they administrator made necessary modification on IIS manager . and able to see the website on browser. but now i can't loging to system using old password.
I tryed to create new password then also it gives error
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Here I have used asp.net login control and membership class. Do I need to make nay changes in code.
I have already modified server name in connection string in web config file.
any one can say what is the problem and how to solve this.
thanks
Pat
View 1 Replies
View Related
Jan 24, 2007
Hi,
I am using SQL Server 2005,
while trying to retrieve data from the database; I am getting the following
error:
A transport-level error has occurred when receiving results
from the server. (Provider: TCP Provider, error: 0 - The handle is invalid.)
But I am getting this error randomly.
Can some one help me out?
Waiting for your response
Sudhakar
View 7 Replies
View Related
Mar 8, 2007
Hi,
Basically the error that I am getting is in our test automation when running as non-admin on the box (regular user). We use .Net C# SQLConnection class to connect to SQL express 2005 impersonating with admin credentials. After getting the connection we try to execute a select command and it some time fails with following error:
A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The handle is invalid.) at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error) at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParserStateObject.ReadPacket(Int32 bytesExpected) at System.Data.SqlClient.TdsParserStateObject.ReadBuffer() at System.Data.SqlClient.TdsParserStateObject.ReadByte() at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlDataReader.ConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader()
This happen only in the non-admin scenario mentioned above. Any idea what is triggering this?
Thanks in advance for all replies.
View 3 Replies
View Related
