OLE DB Source - There Was An Error Displaying The Preview
Mar 12, 2008
note: according to the product documentation parameterized queries should preview just fine.
reference: http://msdn2.microsoft.com/en-us/library/ms139904.aspx
i have an OLE DB Source
Data access mode: SQL command
i began with a simple query, and it previews just fine
i have an existing user variable in my package. its being referenced successfully by an intial "execute sql task" i have.
i then replace the where conditions with parameters.
i click on "parameters..." and map the parameters to my variables.
i click preview and an error appears.
the error message is...
There was an error displaying the preview
Additional information:
no value given for one or more required parameters. (Microsoft SQL Native Client)
i have a data flow configured to use a ole db source. the ole db source uses an ole db connection manager pointing to the adventureworks db which suceeded when i tested its connection. the data access mode of the ole db source is "sql command". below is the sql command text:
SELECT SpecialOfferID, Description DiscountPct, Type, Category, StartDate, EndDate, MinQty, MaxQty, ModifiedDate FROM Sales.SpecialOffer WHERE ModifiedDate >= ? AND ModifiedDate < ?
this query uses 2 paramaters, each of which is mapped to a datetime variable which falls with the range of the ModifiedDate column as follows:
Parameter0: User::ExtractStartDate
Parameter1: User::ExtractStopDate
ExtractStartDate is set to 7/1/2001 and ExtractStopDate is set to 3/31/2004. however, i get the following error when i press the preview button in the ole db source editor: "there was an error displaying the preview. additional information: no value given for one or more required parameters (microsoft sql native client)".
as far as i can tell, i have the ole db source configured correctly. thus, i can't figure out why this error is being generated. has anyone else experienced this issue? if so, were you able to resolve it? is this a bug?
Please... any ideas? Is this a footprint config issue?
TITLE: Microsoft Visual Studio
There was an error displaying the preview.
ADDITIONAL INFORMATION:
Could not load file or assembly 'Microsoft.SqlServer.SQLTaskConnectionsWrap, Version=9.3.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design)
BUTTONS:
OK
===================================
There was an error displaying the preview. (Microsoft Visual Studio)
===================================
Could not load file or assembly 'Microsoft.SqlServer.SQLTaskConnectionsWrap, Version=9.3.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design)
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.PipelineUtils.ShowDataPreview(String sqlStatement, ConnectionManager connectionManager, Control parentWindow, IServiceProvider serviceProvider, IDTSExternalMetadataColumnCollection90 externalColumns)
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowConnectionPage.previewButton_Click(Object sender, EventArgs e)
I have a package which has an Excel source with the 'Data access mode' set to SQL command and then a sql select statement. Â When I try and hit the 'Preview...' button below the 'SQL command text' window I get the following error:
 "Error at Standard Data Flow Tasks [source tasks name]: No column information was returned by the SQL command"  Ordinarily this would be down to the fact that my SQL is shocking, I hit the 'Preview...' button whilst the workbook the source is pointing at was open and it works fine??  I can't figure this out, but needless to say the package errors with a NEEDSNEWMETADATA when I try and run it.
I am now getting this error mesaage when I try to preview my report
[rsInvalidToggleItem] The table €˜table1€™ has €˜siteref€™ as a toggle item. Toggle items must be text boxes that share the same scope as the hidden item or are in a scope that contains the hidden item, and cannot be contained within the current report item unless current grouping scope has a Parent.
What does that mean in english?
Also, if I can't fix this, is there a way to get the one that is deployed and functional on the webserver back into the report designer and reverse engineer it?
I have not touched the groupings since vewiing it last. I have only been adjusting the value boxes of three fields that I had yet to get functional.
My report worked fine for a while, but suddenly I started getting the following errors for Preview:
An error occurred during local report processing.
An error has occurred during report processing.
Index was outside the bounds of the array.
I restarted VS, then rebooted my machine and the problem persists. Everything including the report posted to the server works fine. It is just the Preview of this report does not work any more. Preview of other reports work fine.
Any tip to resolve this problem would be greatly appreciated.
I have a report which has the Interactive Height set to 0 so that it does not use paging. When I try and print preview the report, I can see the report okay until I go forward after the last page, and then I get the error "An error occured trying to render the report. 0x80004005". I can print the report and it prints fine, but I get a pop-up that says that there was an error printing the report. I've narrowed it down to the interactive size property, but am not sure how to get around it.
I'm trying to create a report using a SAP BI InfoCube as my datasource. One of the fields in the InfoCube (GL Account) consist of a 3 level hierarchy, which need to be reported on. The query that I built using QueryBuilder executes fine and displays the hierarchies correctly, but when I preview the report, i get the following error:
An error occurred during local report processing An error has occurred during report processing Query execution failed for data set "SAPBWD" The "0GL_ACCOUNT 1000IE" Object was not found.
0GL_ACCOUNT is the GL account field to report on 1000IE is the selected GL Account Hierarchy to be displayed
Here's the query that was generated using query builder:
SELECT NON EMPTY { [Measures].[D2A3Y7ANS9YOF2FONXMUS9RAI] } ON COLUMNS, NON EMPTY {[0GL_ACCOUNT 1000IE].[LEVEL03].ALLMEMBERS * [ZF_MC].[LEVEL01].ALLMEMBERS } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM [ZFGL_M03/ZREP_BOR001] CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING SAP VARIABLES [ZFV_FY] INCLUDING [0FISCYEAR].[Z12007] [ZFV_PC] INCLUDING [0PROFIT_CTR 1000FS].[10000001000033] [ZFV_RM] INCLUDING [0FISCPER3].[005] [ZFV_PV] INCLUDING [0VERSION].[003]
Source: MS SQL Server 6.5 Destination: MS SQL Server 2005 (SP2 installed) Suppl Ver Info: Microsoft.SqlServer.MaintenancePlanTasks.dll (ver 9.0.3043.0)
Desc: When copying one table from source to destination (using import export wizard), the following error shows. However, when using query select * from tbl_1 can shows preview correctly. (but still need to save as SSIS, and change codepage property before it works)
===================================
The preview data could not be retrieved. (SQL Server Import and Export Wizard)
===================================
Line 1: Incorrect syntax near '['. (Microsoft OLE DB Provider for SQL Server)
------------------------------ Program Location:
at System.Data.OleDb.OleDbDataReader.ProcessResults(OleDbHResult hr) at System.Data.OleDb.OleDbDataReader.NextResult() at System.Data.OleDb.OleDbCommand.ExecuteReaderInternal(CommandBehavior behavior, String method) at System.Data.OleDb.OleDbCommand.ExecuteReader(CommandBehavior behavior) at System.Data.OleDb.OleDbCommand.System.Data.IDbCommand.ExecuteReader() at Microsoft.SqlServer.Dts.DtsWizard.Preview.LoadPreview()
When executing the wizard, the following error shows (the table exists, of course)
===================================
Could not connect source component.
Error 0xc0202009: Source - tbl_1[1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E37.
Error 0xc02020e8: Source - tbl_1[1]: Opening a rowset for "[db_1].[sch_1].[tbl_1]" failed. Check that the object exists in the database. (SQL Server Import and Export Wizard)
===================================
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
------------------------------ Program Location:
at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData() at Microsoft.SqlServer.Dts.DtsWizard.Execute.SetSourceConnection(Exception& ex, TransformInfo ti)
Exception from HRESULT: 0xC02020E8 (Microsoft.SqlServer.DTSPipelineWrap)
I have a flat text file. All the columns are set to redirect on error. But, when I set it to row, it gives the error column, ErrColumn. Is there a way to display the real column name-the column which has the error. Thanks.
I have the emplyID and Typeof time as a PK. When the user enters a duplicate value it just gives them the error page. Can i set a label or something to notify the user of the error instead of the error page?
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
I have a seach on UserID enetred in a textbox by user.
When the user types a userID which has no data in the database can I display an error msg instead of the chart and table that is displayed on entering a valid userID.
Our Visual Studio installation suddenly starting producing the error below upon trying to open any .dtsx package; although by "suddenly" I'm sure it was due to some Windows update or other program install, update, or uninstall. I've spent two days uninstalling, reinstalling, and repairing everything that is seemingly related to VS, but no luck. I've searched the forums and could not find this specific error mentioned, although I have tried some of the suggestions to fix possibly related 'class not registered' errors, but again no luck.
=================================== There was an error displaying the layout. (Microsoft Visual Studio) ------------------------------ For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=DDSErrorDeserializeDiagram&LinkId=20476 =================================== Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) (msddsp) ------------------------------ Program Location: at MSDDS.IDdsDiagram.CreateShape(String ProgID, Boolean Visible, Int32 X, Int32 Y) at Microsoft.DataWarehouse.Controls.Interop.AxMSDDS.CreateShape(String progID, Boolean visible, Int32 x, Int32 y) at Microsoft.DataWarehouse.Design.ComponentDiagram.OnCreateShape(Object logicalObject, Int32 x, Int32 y, Boolean visible) at Microsoft.DataTransformationServices.Design.DtsComponentDiagram.OnCreateShape(Object component, Int32 x, Int32 y, Boolean visible) at Microsoft.DataWarehouse.Design.ComponentDiagram.CreateShape(Object logicalObject, Int32 x, Int32 y) at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.CreateExecutableShape(DtsContainer dtsContainer, Int32 x, Int32 y, Int32 width, Int32 height) at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.RefreshSequenceExecutables(IDTSSequence sequence) at Microsoft.DataTransformationServices.Design.DtrControlFlowDiagram.AfterDeserialize()
Hi all, We are displaying an SQL Server 2005 Reporting Services report in our ASP.NET 1.1 application by accessing the report through URL and embedding the same in an iframe HTML web control. The user can export the report contents into CSV format by making use of the export functionality provided by Reporting Services. Now we have been asked to display a warning mesage to the user when the no. of records in the report exceeds 1 million i.e. if the no. of records in the report exceeds 1 million and the user tries to export the report to CSV format by clicking on the "Exprot" link button, we need to display a warning message to the user. My doubt is whether this can be done in Reporting Services. Are there any programmatic interfaces exposed by Reporting Services which might help us implement this requirement ?
If divisor is "0" I need to print the Field, but for me it displaying #Error. If I pass any value it is working fine. It is not working only for the Field.
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
Hello, I get the following error when I run my package interactively. From the logs written out by the driver, it appears that all is working well as far as connecting to the data source and pulling data. It seems as if this error occurs when the DataReader source tries to process the received data.
SSIS package "MyPackage.dtsx" starting. Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Error: 0xC0047062 at Data Flow Task, DataReader Source [1]: System.Data.Odbc.OdbcException: ERROR [42000] XML parse error at 162:1338: not well-formed (invalid token) at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader, Object[] methodArguments, SQL_API odbcApiMethod) at System.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method, Boolean needReader) at System.Data.Odbc.OdbcCommand.ExecuteReader(CommandBehavior behavior) at System.Data.Odbc.OdbcCommand.ExecuteDbDataReader(CommandBehavior behavior) at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.PreExecute() at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostPreExecute(IDTSManagedComponentWrapper90 wrapper) Error: 0xC004701A at Data Flow Task, DTS.Pipeline: component "DataReader Source" (1) failed the pre-execute phase and returned error code 0x80131937. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (691)" wrote 0 rows. Task failed: Data Flow Task SSIS package "MyPackage.dtsx" finished: Success.
I am not sure where to look next. Any help is much appreciated.
I am having trouble with report results. The dataset(dynamic sql sp ) returns correct results for the parameters passed. But when report is previewed with same parameter values(that were supplied to dataset) the results are wrong. It works for certain results, but fails to display correct results for 2 of the categories. I tried deploying it to srvr. There too it fails for same 2 categories. I have been struggling with it all day.
The independently exceuted the sp with the same data supplied to rpt parameters - that also renders correctly.
Has any one faced this type of issue? Is this some type of caching issue? I am totally baffled!
I have a problem. I have developed a report. When i see the preview of the report there is no data coming up. On the other hand, when I deploy the report and execute the report from the report manager, I am able to see data for the report. It is pointing to the same database.
I feel i am missing something. Any help in this regard is welcome.
i am getting the following error in XML Source after generating the schema . if i click the columns
Error at Data Flow Task[XML Source[1]]; There was an error setting up the mapping . The root element of a W3XML Schema should be <schema> and its namespace should be 'http://www.w3.org/2001/XMLSchema'
I got the following error when i tried to run a simple scenario using a XML source to load from a RSS feed to a Data Reader Destination.
[XML Source [621]] Error: The component "XML Source" (621) was unable to read the XML data. The remote server returned an error: (407) Proxy Authentication Required. Any clues?
I need to load data from an xml file to a SQL Server 2005 table. The value of some of the elements/attributes will be added to columns of the table whereas for other elements XML will be inserted in a column of type XML.
I tried a file with its schema but it gave me an error
'Error At Data Flow Task [XML Source[1]] The Component was unable to process XML Data. Ambiguous Complex Type Definition. The element 'http://www.mystore.com/2:ApplicantName' has multiple members named 'http://www.mystore.com/2:FirstName'
NOTE: The xml file is well-formed and is already validated against the schema using XMLSpy.
1) How to get rid of this error?
2) How to get the values for some of the elements/attributes and XML for other elements.
Hi all Finally i am able to get preview in PDF Format. But i have one problem When i place ReportViewer Control on same page i am able to get preview in PDF Format. But When i redirect to a other page by placing Reportviewer Control on that page,I am not able to get the preview in PDF Format.If i preview in same page,i am getting PDF report but Back button is disabled. Pls help me. My Source code is
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
