OLE error code:80040E14 in Microsoft OLE DB Provider for SQL Server
Column 'tags.id' is invalid in the select list because it is not
contained in either an aggregate function or the GROUP BY clause.
when trying to execute the following query:
select tags.id, name, count(*) as count from taggings, tags where
tags.id = tag_id group by tag_id
The above query works fine on MySQL, but chokes on SQL Server.
With the below procedure I want to run a stored procedure on a SQL-server 2000, but for some reason I get run-time error -2147217900 (80040e14), stating that the stored procedure doesn't exist.
As it does exist, the connection is open, and running the code in query analyzer works, I center the problem down to the database being used.
But whats wrong? The user and database has been added to the system dsn AccessSQL, user and passwords works fine in query analyzer.. yet for some reason it apparently sends the ado command to the wrong database, and thus can't find the stored procedure.
Thanks in advance,
Trin
Dim forbindelse As New ADODB.Connection Dim kommando As New ADODB.Command Dim pam1, pam2 As ADODB.Parameter Dim forbindelseDSN As String Dim strSQLland As String Dim strSQLtid As String
I am getting an error when trying to execute the following statement in ms sql. It works fine in ms access. I get the following error: -------------------------------- Microsoft OLE DB Provider for SQL Server error '80040e14' 'cdbl' is not a recognized function name. ------------------------------ Here is the sql that poses a problem.
Hi guys, it's nice to join the forum. Can someone can help me?After 2 years of using a program, i suddenly got this error. I triedre-installing SQL but im still getting the message.Microsoft OLE DB Provider for ODBC Drivers error '80040e14'[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot load the DLLxplog70.dll, or one of the DLLs it references. Reason: 193(error notfound).
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
I cannot execute a package by using Execute Package task. I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Trying to update my local developer version of SQL Server 2005 SP1 to SP2. The setup program terminates with the following information dumped from the logs. Not sure if it is related, but I recently installed the SQL Server 2005 Compact Edition (tools, runtime, etc) on the same development machine. It is a little too deep for me to figure out
Darryl
Here are the last few lines of the HotFix.Log
04/24/2007 14:46:48.374 MSP Error: 29527 The setup has encountered an unexpected error in datastore. The action is RestoreSetupParams. The error is : Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
04/24/2007 14:46:48.822 The following exception occurred: Unable to install Windows Installer MSP file Date: 04/24/2007 14:46:48.822 File: depotsqlvaultstablesetupmainl1setupsqlsesqlsedllcopyengine.cpp Line: 800
Now the SQL9_Hotfix_KB921896_sqlrun_sql.msp.log shows this as the last few lines
MSI (s) (A4:38) [14:46:48:630]: Product: Microsoft SQL Server 2005 - Update 'Service Pack 2 for SQL Server Database Services 2005 ENU (KB921896)' could not be installed. Error code 1603. Additional information is available in the log file C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 1729 MSI (s) (A4:38) [14:46:48:630]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:630]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:646]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:646]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:662]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Transforming table Error.
MSI (s) (A4:38) [14:46:48:678]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (A4:38) [14:46:48:678]: Product: Microsoft SQL Server 2005 -- Configuration failed.
MSI (s) (A4:38) [14:46:48:678]: Attempting to delete file c:WINDOWSInstaller6749ee3.msp MSI (s) (A4:38) [14:46:48:678]: Unable to delete the file. LastError = 32 MSI (s) (A4:38) [14:46:48:694]: Cleaning up uninstalled install packages, if any exist MSI (s) (A4:38) [14:46:48:694]: MainEngineThread is returning 1603 MSI (s) (A4:2C) [14:46:48:694]: Destroying RemoteAPI object. MSI (s) (A4:04) [14:46:48:694]: Custom Action Manager thread ending. === Logging stopped: 4/24/2007 14:46:48 === MSI (c) (58:E4) [14:46:48:694]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (58:E4) [14:46:48:694]: MainEngineThread is returning 1603 === Verbose logging stopped: 4/24/2007 14:46:48 ===
Time: 04/24/2007 14:46:48.854 KB Number: KB921896 Machine: DUTTONDARRYL1 OS Version: Microsoft Windows XP Professional Service Pack 2 (Build 2600) Package Language: 1033 (ENU) Package Platform: x86 Package SP Level: 2 Package Version: 3042 Command-line parameters specified: Cluster Installation: No
********************************************************************************** Prerequisites Check & Status SQLSupport: Failed
********************************************************************************** Products Detected Language Level Patch Level Platform Edition Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x86 DEVELOPER Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x86 DEVELOPER Notification Services ENU SP1 9.00.2047.00 x86 DEVELOPER Integration Services ENU SP1 9.00.2047.00 x86 DEVELOPER SQL Server Native Client ENU 9.00.2047.00 x86 Client Components ENU SP1 9.1.2047 x86 DEVELOPER MSXML 6.0 Parser ENU 6.00.3890.0 x86 SQLXML4 ENU 9.00.2047.00 x86 Backward Compatibility ENU 8.05.1704 x86 Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x86
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi,My SQL Server 2005 won't start - can anyone provide some help? Thisseems to be the most significant error:- TDSSNIClient initialization failed with error 0x5, status code 0x51.There was some info here, but the reg key described looks okay:- http://blogs.msdn.com/sql_protocols/I am running SQL Server 2005 64-bit Standard Edition. The server inquestion is the first node of an Active/Active Cluster. This firststarted happening while I was trying to add a share as a clusteredresource of the other node (not to this node's resources).I have not yet reinstalled SQL Server 2005 because I am hoping for moreexplanation of the problem and a possible fix.Thanks,Tom
Hi All,I want to catch the next MSSQL error in my SQL code with following continuecalculationsServer: Msg 17, Level 16, State 1, Line 1SQL Server does not exist or access denied.If REMOTE_SERVER_1 is inaccessible (as in (a) below) the executing of SQLwill not continue with (b) - I need the code in (b) to run despite whetherthe previous exec was successful or not - Any ideas?begin transaction(a) exec REMOTE_SERVER_1...bankinsert '1' , '1' , 1 , 0 , 0(b) print @@errorcommit transactionwhere REMOTE_SERVER_1 is link to server created byEXEC sp_addlinkedserver @server = 'REMOTE_SERVER_1', @srvproduct = '',@provider = 'SQLOLEDB', @datasrc = 'MYCOMP1', @catalog = 'mirror2'EXEC sp_addlinkedsrvlogin @rmtsrvname = 'REMOTE_SERVER_1', .....Exec sp_serveroption 'REMOTE_SERVER_1', 'data access', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'rpc out', 'true'Exec sp_serveroption 'REMOTE_SERVER_1', 'collation compatible', 'true'Any help will be greatly appreciated
When I use SSIS for extract data from ssas, that means,I use mdx query.
then random error occured.
Hope some one can understand my poor English....
And the Error Info show below.
Code Snippet
Error: 0xC0202009 at Data Flow Task - For Individual User Tech Points, OLE DB Source 1 1 [31]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E05. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Analysis Services 2005" Hresult: 0x00000001 Description: "Error Code = 0x80040E05, External Code = 0x00000000:.". Error: 0xC004701A at Data Flow Task - For Individual User Tech Points, DTS.Pipeline: component "OLE DB Source 1 1" (31) failed the pre-execute phase and returned error code 0xC0202009.
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00 Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0 Server ABC Job Name ADM_AdminDB_TP_Backup.Subplan_1 Step Name (Job outcome) Duration 00:00:00 Sql Severity 0 Sql Message ID 0 Operator Emailed Operator Net sent Operator Paged Retries Attempted 0
Message The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup' WITH MOVE 'arsystem' TO 'd:ardataarsystem.mdf' , MOVE 'arsystem_log' TO 'D:ARLOGARsystem' , STANDBY = 'E:SQL backup from productionSQL daily diff back up' EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
I just installed SQL Server 2005 on Windows Vista. I am getting an error "An unknown error occurred in the WMI provider. Error Code 8000000A" when connecting to a web server. The reporting services is running. Is there any other installation that is missing. Please help.
I am trying to install Project Server, and i'm having issues with sharepoint, and connecting to SQL:
dataserver is running sbs2003 sql2003 and analsys services.
server2 is running server2003 is to be the application server for project.
ProjectDb is the database that i have setup in sql.
username is the account that can control everything as administrer.
in Sharepoint is asks for the database server: <<dataserver>>
SQL Server database name: <<ProjectDb>>
I'm using windoes authentication and then i click ok, and get the error message.
I've also see the error message can not find the SQL Server, and access denied. Under ODBC i have installed the sql server information under System DSN.
Hi,After sending a request, I would get the possible error message.Not the code @@error, nor the exact content of sysmessages, but themessage like it could be in the log file.TIA,TSalm
my code was working fine but i changed a few things and now i cant figure it out. the problem is that when i click my edit button none of the items go into the listbox. i added a label to track th error and i narrowed it done to a smaller ssection. Please help
//----------------------------------------------------------------------------- ///////////////////////////////////////////////////////////////////////////////// protected void EditButton1_Click(object sender, EventArgs e) { int counter = 0; //counter for inserting into array
bool Validate = checknumberValidation(TextBox1.Text.ToString()); if (Validate == false) throw new Exception(InvalidCheckNumber + TextBox1.Text);
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//get # of checkboxes and set array size; int x = 0; x = SetStringArraySize(); //set x to number of checkboxes that are checked String[] updateString = new String[x]; //create string array of size x
Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
//for loop that will insert update statements into array for (int i = 0; i < GridView1.Rows.Count; i++) { GridViewRow row = GridView1.Rows[i]; bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked; if (isChecked == true) { if (counter == 0) updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'";
if (counter > 0) updateString[counter] = "[batchid] = '" + GridView1.Rows[i].Cells[3].Text + "' AND [loanid] = '" + GridView1.Rows[i].Cells[5].Text + "' AND [historycounter]='" + GridView1.Rows[i].Cells[8].Text + "'"; counter++; } }
//Add items to listbox and set listbox to visible. Panel1.Visible = true; PanelGridView.Visible = false; Panel2.Visible = false; updateCount.Text = updateString.Length.ToString(); updateCheckNumber.Text = TextBox1.Text;
int q = 0; while (q < updateString.Length) { ListBox1.Items.Add(updateString[q]); q++; } //Label1.Text = temp.Length.ToString(); //Test print to label }
//----------------------------------------------------------------------------- //COMPLETE protected int SetStringArraySize() { Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
int count = 0; for (int i = 0; i < GridView1.Rows.Count; i++) { GridViewRow row = GridView1.Rows[i]; bool isChecked = ((CheckBox)row.FindControl("UpdateCheckBox1")).Checked; if (isChecked == true) { count++; }
} Label4.Text = GridView1.Rows.Count.ToString(); //--------RETURNS 0-----SHOULD BE NUMBER OF ITEMS----//
return count; //returns number of checkboxes that are checked } ///////////////////////////////////////////////////////////////////////////////// //-----------------------------------------------------------------------------
Insert Into ProcessQueue (queued_url, que_user, dqueued, quepriority, status) Values ('domain.com', '1000', GetDate(), '5', IF (Select Count(*) From ProcessQueue Where Status = '1') > 3 Then '0' Else '1') Im getting: Incorrect syntax near the keyword 'IF'.Incorrect syntax near the keyword 'Then'.Also, Is there anyway to return the value which was placed into the status column to my app for processing or do I have to open a data reader and use another select statment. Thanks!
I have a c++ app that is trying to do an update, we use ADO to SQL7. It's returning error code 3119. Has anyone seen this error before? I didn't find anything in BOL or MSDN.
I am getting the 207 error code and can't figure out the problem. I have a coldfusion page that is calling a stored procedure. The page allows users to sort the displayed columns and it is passing the column numbers into my stored procedure. I am using a case statement to decide which sort to use.
The error message is: Invalid column name 'SCHOOL'. I've tried adding single and double quotes here and it worked before I added the case statment when I just type 'order by school'.
Below is some of my code:
SELECT P.NAME, P.ASORG, P.MAILSTOP, P.OFCPHONE, R.EMPLID, SCHOOL = S.DESCR, R.DEGREE_LEVEL, R.DISCIPLINE, TEAM = T.TEAM_NAME, NAT_EVENT = NE.EVENT_NAME, R.SCHOOL_CODE, R.TEAM_CODE, R.EVENT_CODE, FROM HR_EXTRAS..RECRUITERS R, HRWH..PS_SCHOOL_TBL S, HRWH..PERSON P, HR_Extras..UP_TEAMS T, HR_Extras..UP_NATIONAL_EVENTS NE, WHERE R.SCHOOL_CODE = S.SCHOOL_CODE AND R.EMPLID = P.SNL_ID AND T.TEAM_CODE = R.TEAM_CODE AND NE.EVENT_CODE = R.EVENT_CODE ORDER BY CASEWHEN @SORT = 1 THEN P.NAME WHEN @SORT = 2 THEN P.ASORG WHEN @SORT = 3 THEN SCHOOL WHEN @SORT = 4 THEN T.TEAM_NAME WHEN @SORT = 5 THEN NE.EVENT_NAME END
Error messages: Source: mscorlib Target Site: Void WinIOError(Int32, System.String) Message: Access to the path 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLReplDatauncServername_ADVENTUREWORKS_ADVWORKSPRODUCTTRANS20070625161637' is denied. Stack: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, DirectorySecurity dirSecurity) at System.IO.Directory.CreateDirectory(String path, DirectorySecurity directorySecurity) at Microsoft.SqlServer.Replication.Utilities.CreateDirectoryWithExtendedErrorInformation(String directory) at Microsoft.SqlServer.Replication.Snapshot.SnapshotProvider.CreateSnapshotFolders() at Microsoft.SqlServer.Replication.Snapshot.SqlServerSnapshotProvider.GenerateSnapshot() at Microsoft.SqlServer.Replication.SnapshotGenerationAgent.InternalRun() at Microsoft.SqlServer.Replication.AgentCore.Run() (Source: mscorlib, Error number: 0)
I totally followed by tutorials of replication, repldata is new created folder
sharing for windowns accounts like shown below
repl_distribution read
repl_merge read
repl_snapshot Full control
the settting for these accounts same with security setting
HeyASP.NET 2.0 + MS Sql Server 2005 Express (that version which comes with VS2005)This code below fails. The Delete method executes a stored procedure, but somehow this SP fails. The SP shown here is a short version of the actual SP. As you see from the code below, there are no way the Delete method can know if SP executed successfully. I assume I just could have returned @@error, but that just gives an error number, and not the description of the error??.. And how should I capture exceptions like these?? How should code this SP so it report the error??Any suggestions??public override void Delete(System.Guid id, int user){ using (SqlConnection cn = new SqlConnection(this.ConnectionString)) { SqlCommand cmd = new SqlCommand("SendMessage", cn); cmd.CommandType = CommandType.StoredProcedure; cmd.Parameters.Add("@id", SqlDbType.UniqueIdentifier).Value = id; cmd.Parameters.Add("@user", SqlDbType.Int).Value = user; }} ALTER PROCEDURE dbo.DeleteMessage @id uniqueidentifier, @user intASBEGIN UPDATE table_A set column_A = 1 WHERE Id = @id; DELETE FROM table_B WHERE Id = @id; IF (@@error = 0) COMMIT TRAN; ELSE ROLLBACK TRAN;END
"SELECT p.ProductID, p.ProductTitle FROM Product p " & _ "WHERE (p.Price > '%" & FormatCurrency(lowestPrice, 2) & "%' AND p.Price < '%" & FormatCurrency(highestPrice, 2) & "%')" & _ "ORDER BY p.ProductTitle"
I have got syntax error in this SQL coding, can someone help me? is it i write it wrongly somewhere? This SQL coding i want to retrieve from database the price range of the product (currency). please help me.. thanks alot
Error displayed on explorer:
Syntax error (missing operator) in query expression 'p.ProductID = pa.ProductID AND (pa.AttributeVal LIKE '%Realism%') UNIONSELECT p.ProductID, p.ProductTitle FROM Product p WHERE (p.Price > '%$80.00%' AND p.Price < '%$100.00%')'.
I have a user that is trying to connect to a database on a SQl 7.0 server and gets an error 20050. Information that I have says this may be caused by the ODBC Data Source Name being misconfigured. We checked the configuration on the client and see no problems.
The application is called Maximo and is made by MRO Software.
Getting Code 0 errors in ActiveX scripts within DTS & can't trap the decription(s). I remember seeing an OLD Thread on expanding the Code 0 errors but can't find it.
Hello all,I use Crystal Report v9, SQL server 2000.When I try to connect to a Database via ADO, I got the following error.Login failed.Details :ADO Error Code:0x80040e4dSource:Microsoft OLE DB Provider for SQL ServerDescription:Login failed for use’xxxxxxx’SQL State: 42000Native Error:18456Is there anyone how has this problem?How can I fix this?Thanks in advance,Do.--Message posted via http://www.sqlmonster.com
I am working with c# windowsa application. i want to connect to the .sdf file in button click event.I am writing this code
string str= "D:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\Northwind.sdf"; SqlCeConnection cn = new SqlCeConnection(str); cn.Open(); it is not working. I am getting this error
Unable to load DLL 'sqlceme30.dll': The specified module could not be found.
i need to export the contents of a sql server 2005 table to excel in ssis. there are two nvarchar(max) colums in my table. the data flow task in my package fails unless i remove these two columns from the table, then it works fine. the error code being returned is 0xC0202025. HELP!
