OPENXML And Binary/Image Data
Aug 17, 2005
I seem to be getting very annoying behaviour from SQL Server and was wondering what the correct method should be...I want to store some binary data in the database and I want to use a stored procedure. I also want to pass some XML to the stored procedure where this XML contains the binary data. I will then use OPENXML to grab the binary data and stick in the table. In order to ensure the safe transmission of the binary through XML I Base64 encode it. Ok so far. The problem is that although OPENXML is supposed to assume that anything marked as Image/Binary will be Base64 encoded it then proceeds to Base64 encode it again and put that result into the database! So what am I missing, am I supposed use a CDATA section or something rather than Base64 encode my XML?
View 2 Replies
ADVERTISEMENT
May 13, 2008
Hi I have an image column (Spectrum) in a Table (ParticleEDS) which is populated with an array of a bunch of INT32's (4 bytes each)
Using TSQL is there any way that I can read each 4 bytes (convert this to an INT) and return this data for a given record (based on ParticleEDSID).
I know that there are 2048 x 4 bytes that make up the image column.
I would like the output of the query/stored procedure to be:
Value
------------
1 2342
2 2334
3 3343
.....
2048 1001
thanks!
View 20 Replies
View Related
Aug 23, 2007
Hi. how can i store binary data to another field with image data types.
here is my sample code
--note: [CUD_DOCUMENT] and [RES_DOCUMENT] are image data type
DECLARE @CUD_DOCUMENT binary
SELECT @CUD_DOCUMENT = CUD_DOCUMENT FROM CUD_CONTINUOUS_UPLOAD_DOCUMENTS
INSERT INTO [RES_RESUMES](
[RES_DOCUMENT] -- image data type
) VALUES (
@CUD_DOCUMENT)
thnx for the help.
View 2 Replies
View Related
Jul 11, 2006
Hi
When images are uploaded and stored directly into a sql database as binary data (eg in the club starter kit) how can those images be accessed and displayed.
When I open the images table in VWD and select display data, the cells holding the image data hold a <binary data> tag. What I want to be able to do is get at that data, or actually get at the image so that it is displayed. My reason is this, at the moment the only way to access the images in the sql database after they have been uploaded is to log into the website and view them as an administrator of the site. It would be much simpler if I could access the database directly and view the contents of the images table.
Any ideas?
Thanks
View 2 Replies
View Related
Jul 21, 2005
i am trying to retrieve an image blob stored in SQL to a web matrix form (using VB.NET). I am totaly new to this and i got the code below from a site but it doesn't see to work.....
<%@ Page Language="VB" %>
<%@ import Namespace="System.Data" %>
<%@ import Namespace="System.IO" %>
<%@ import Namespace="System.Drawing.Image" %>
<%@ import Namespace="System.Drawing.Bitmap" %>
<%@ import Namespace="System.Drawing.Graphics" %>
<%@ import Namespace="System.Web.UI.WebControls" %>
<%@ import Namespace="System.Data.Odbc" %>
<%@ import Namespace="System.Data.SqlClient" %>
<script runat="server">
Private Function GetImageFromDB(ByVal ImageID As Integer) As System.Drawing.Image
' Get the Connection string
Dim strConnection As String
strConnection = "server='(local)'; trusted_connection=true; database='mydatabasename'"
Dim conn As New SqlConnection(strConnection)
Dim sqlCommand As String
Dim strImage As String
Dim image As System.Drawing.Image
Try
sqlCommand = "SELECT ImageField FROM ImageTable WHERE MyImageId = " + ImageID.ToString
Dim cmd As New SqlCommand(sqlCommand)
cmd.Connection = conn
conn.Open()
Dim dr As SqlDataReader
dr = cmd.ExecuteReader()
While (dr.Read())
Dim byt As Byte()
byt = dr.Item(strImage)
Dim bmp As New System.Drawing.Bitmap(New System.IO.MemoryStream(byt))
image = bmp
End While
Catch ex As Exception
' Log Error
Response.Write(ex.Message)
Finally
If conn.State = ConnectionState.Open Then
conn.Close()
End If
End Try
Return image
End Function
Private Sub Page_Load (ByVal sender As System.Object, ByVal e As System.EventArgs)
If Not IsPostBack Then
GetImageFromDB(2111)
End If
End Sub
</script>
<html>
<head>
</head>
<body>
<form enctype="multipart/form-data" runat="server">
<asp:Image id="BrandSignImg" runat="server"></asp:Image>
</form></body></html>
View 1 Replies
View Related
Jan 13, 2008
Hi, All
Can you add a group of images into the aspnet_profile table as a serialized binary blob?
If so how do you retrieve the image from the blob?
View 1 Replies
View Related
Dec 21, 2005
I am using FileUpload control in ASP.net 2.0 to upload files and store them into SQL server database as an image. I am fine with MS office files, image files and etc. We have Product Center (Proe) engineering software to configure parts and the files generated through this software have PLT extension when I store these files, the file type is Plian/text. I am using Fileupload.PostedFile.Content to get the file type. How can I store PLT, TIF files in SQL server? Please help.
View 12 Replies
View Related
Sep 18, 2005
I have a table that contains the following two columns:BITS (image(16))BIT_LENGTH (int(4))When I look at the table, I see "OLE Object" in the BITS column. Whatsyntax should I use in a SELECT statement to convert the binary imageinfo contained in "BITS" into simple text that I can read? What roledoes the BIT_LENGTH field play?
View 1 Replies
View Related
Nov 1, 2006
please mail me at lavkesh_kumar@yaho.com
View 2 Replies
View Related
May 7, 2015
I'm using a bit-wise comparison to effectively store multiple values in one column. However once the number of values increases it starts to become too big for a int data type.you also cannot perform a bitwise & on two binary datatypes. Is there a better way to store the binary data rather than int or binary?
View 9 Replies
View Related
May 15, 2007
Hi All,
I am not sure whether this is the right place to post this question. But I am unable to figure out what is the best solution to retrieve and display an image in a html file(stored in varbinary(max) column). I have a list of images in the file and I am supposed to display them. Can anybody please let me know what is the best way to do this?
Thanks a lot!!
View 1 Replies
View Related
Apr 20, 2007
I am using the 3-tiered architecture design (presentation, business laws, and data acess layers). I am stuck on how to send the image the user selects in the upload file control to the BLL and then to the DAL because the DAL does all the inserts into the database. I would like to be able to check the file type in the BLL to make sure the file being uploaded is indeed a picture. Is there a way I can send the location of the file to the BLL, check the filetype, then upload the file and have the DAL insert the image into the database? I have seen examples where people use streams to upload the file directly from their presentation layer, but I would like to keep everything seperated in the three classes if possible. I also wasn't sure what variable type the image would be in the function in the BLL that receive the image from the PL. If there are any examples or tips anyone can give me that would be appreciated.
View 2 Replies
View Related
May 27, 2008
Hi All,
i have a table in MS Access with CandidateId and Image column. Image column is in OLE object format. i need to move this to SQL server 2005 with CandidateId column with integer and candidate Image column to Image datatype.
its very udgent, i need any tool to move this to SQL server 2005 or i need a code to move this table from MS Access to SQL server 2005 in C#.
please do the needfull ASAP. waiting for your reply
with regards
View 1 Replies
View Related
Oct 18, 2006
When I enter over 4000 chars in any ntext field in my SQL Server 2005 database (directly in the database and through the application) I get an error saying that the data could not be updated because string or binary data would be truncated.Has anyone ever seen this? I cannot figure out what is causing it, ntext should be able to hold a lot more data that this...
View 7 Replies
View Related
May 21, 2008
String or binary data would be truncated. I get this error when entering data using sql server management studio express.
I am not running a sql to insert or update the table. This is through the EDI.
The data type is varchar(100). I enter one character and it errors on me. So this isn't a string being too long problem.
Any ideas?
View 2 Replies
View Related
Feb 21, 2006
When using AquaData or JDBC (inet tds driver), when doing an insert using SqlServer 2005, I get error "String or binary data would be truncated" when the data is actually OK. There are no triggers, etc. that would confuse the situation. It works fine in SqlServer 2000.
The scenario is as follows:
Create table:
create table test3 (
name varchar (18) ,
tbname varchar (18)
)
Create and populate table:
create table maxtable (
tablename varchar (18) not null,
[...]
)
Try to insert into test3:
insert into test3 (name, tbname)
select i.name, o.name
from dbo.sysindexes i, sysobjects o, maxtable m
where i.indid > 0 and i.indid < 255
and i.id = o.id and i.indid = 1
and o.name = lower(m.tablename)
And I get the error "String or binary data would be truncated." The values being selected for i.name and o.name have maximum length of 18. There are other rows in sysindexes and sysobjects with longer values, but they are not being selected.
The error does not occur with SQL Server Management Studio, and does not occur using SqlServer 2000.
View 6 Replies
View Related
May 22, 2014
Server is SQL 2000
I have a table with 10 rows with a varbinary column
I wish to concatenate all the binary column into a single binary column and then write that to another table within the database. This application splits a binary file (Word or PDF document) into multiple segments (this is Column2 as below)
example as follows
TableA
Column1 Column2 Column3
aaa 001 <some binary value>
aaa 002 <some binary value>
aaa 003 <some binary value>
aaa 004 <some binary value>
aaa 005 <some binary value>
desired results in TableB
Column1 Column2
aaa <concatenated value of above binary columns>
View 9 Replies
View Related
Dec 28, 2007
Hello,
I have a table which uses binary data to store passwords. How do I view the contents of the "binary data" column, ie. the passwords? It just shows it as <binary data>?
View 5 Replies
View Related
Feb 8, 2001
We have a dll that sends a hexadecimal data (const. length) to MS SQL Server database. It's declared as String in VB, the db column data type is binary.
Here is the SQL String that has been executed successfully in Query Analyzer:
"declare @MyHAX varchar(32)
select @MyHAX='0x3236374535454337363145313430463742394545 413443473230343544320000'
insert MyTABLE (MyCOLUMN)
values (convert (binary(32),@MyHAX))"
When I am trying to do the same thing in the insert stored procedure, I get an error message: "Disallowed implicit conversion from data type varchar to data type binary, table 'MyDB.dbo.MyTABLE', column 'MyCOLUMN'. Use the convert function to run this query."
Does anyone know how can I insert my binary data?
View 5 Replies
View Related
Oct 21, 1998
How does one go about getting a graphic image into SQL Server 6.5. For example, let`s say I have a company logo that I want to include in a company profile table to be used on some reports. The graphic is now a .BMP or .GIF or .JPG file.
I just do not have a clue how this works.
Bob
View 3 Replies
View Related
Apr 1, 2008
Hi there,
Am working on an archiving system that stores files/images in a column of type Binary. we want to change the front end of this archiving system it was done using asp.net we dont have access to the source code
what is the way to retrieve the files from the binary columns?
how they store or retrieve the files?
Thanx best site for sql,,,
View 1 Replies
View Related
Jul 24, 2007
Hello Dears,
I was Maked Pictures table in sql server 2005 with Two Col pic_Id (int) and picture(binary)
i need now ro insert image into this table by Asp.net under VB.net Code i have in my form FileUpload and button control
and this is my CodeProtected Sub btnLoad_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnLoad.Click
Dim content() As Byte = ReadBitmap2ByteArray(FileUpload1.PostedFile.ContentType)
StoreBlob2DataBase(content)
End SubFunction ReadBitmap2ByteArray(ByVal FileName As String) As Byte()
Dim image As Drawing.Bitmap = New Drawing.Bitmap(FileName)Dim stream As IO.MemoryStream = New IO.MemoryStream()
image.Save(stream, System.Drawing.Imaging.ImageFormat.Bmp)Return stream.ToArray
End Function
Sub StoreBlob2DataBase(ByVal content As Byte())
con.Open()Dim cm As New SqlCommand("Insert into Pictures(Pic_Id,picture) values(@id,@pic)", con)
cm.Parameters.AddWithValue("@ID", 1)Dim p1 As New SqlParameter
p1.ParameterName = "@pic"
p1.SqlDbType = Data.SqlDbType.Binary
p1.Value = content
p1.Size = content.Length
cm.Parameters.Add(p1)
cm.ExecuteNonQuery()
End Sub
when i make run to my website it give me an Exeption in this statement
Dim image As Drawing.Bitmap = New Drawing.Bitmap(FileName)
it tell me that Parameter is not valid
i need help about this please
with my Best regard
khalil
View 3 Replies
View Related
Sep 20, 2007
Here is my task I am storing pdf's in sql server. I would like to retrieve the binary data from sql server and write the pdf content into an existing aspx page to the appropriate pageview section. What is the best way to handle this. The code works below but it loads a new browser with the content. I need it to appear in it's tabbed section in the original aspx file. Any assistance you can give me would be greatly appreciated.
Thanks Jerry
oSQLConn.Open()Dim myreader As SqlDataReader
myreader = myCommand.ExecuteReader
Response.Expires = 0
Response.Buffer = True
Response.Clear()
Do While (myreader.Read())
Response.ContentType = ("application/pdf")Response.BinaryWrite(myreader.Item("img_content"))
Loop
View 2 Replies
View Related
Mar 29, 2008
Hello All, I am using a stored procedure. In that stored procedure I am passing the name of a table as an argument. and after executing that procedure, it gives me the 'Insert' query of each and every row. So if I have 10 records, then the procedure will give me 10 'Insert' queries with its table values. There is a image datatype in last column of my table. and i am not able to fetch that binary data of that table. Can anybody tell me what is the problem with my stored proce. given below :: ALTER PROCEDURE [dbo].[SP_Generate_Insert_Statements_Testing]
@strTableName varchar(128), -- used to specify the table to generate data for
@RequiredGo bit = 0 -- used to allow GO statements to separate the insert statements
AS
--Variable declarations
DECLARE @InsertStmt varchar(max)
DECLARE @Fields varchar(8000)
DECLARE @SelList varchar(max)
DECLARE @ColName varchar(128)DECLARE @IsChar tinyint
DECLARE @tableData varchar(8000)
DECLARE @strImageSQL varchar(200)
DECLARE @strTextSQL varchar(200)
DECLARE @ImageData varbinary(8000)
DECLARE @TextData varchar(max)
DECLARE @bitIdentity BIT
SET NOCOUNT OFF
SELECT @bitIdentity = OBJECTPROPERTY(OBJECT_ID(TABLE_NAME), 'TableHasIdentity')
FROM INFORMATION_SCHEMA.TABLESWHERE TABLE_Name =@strTableName
PRINT '---- ** Start of Inserts ** ----'
PRINT ''
IF @bitIdentity = 1
BEGIN
PRINT 'SET IDENTITY_INSERT [' + @strTableName +'] ON '
END
--initialize variables
SELECT @InsertStmt = 'INSERT INTO [' + @strTableName + '] (',
@Fields = '',
@SelList = 'SELECT '
--create a cursor that loops through the fields in the table
--and retrieves the column names and determines the delimiter type that the field needs
DECLARE CR_Table CURSOR FAST_FORWARD FOR
SELECT COLUMN_NAME,
'IsChar' = CASEWHEN DATA_TYPE in ('int', 'money', 'decimal', 'tinyint', 'smallint' ,'numeric', 'bit', 'bigint', 'smallmoney', 'float','timestamp') THEN 0
WHEN DATA_TYPE in ('char', 'varchar', 'nvarchar','uniqueidentifier', 'nchar') THEN 1WHEN DATA_TYPE in ('datetime', 'smalldatetime') THEN 2
WHEN DATA_TYPE in ('text', 'ntext') THEN 3WHEN DATA_TYPE in ('sql_variant') THEN 4
WHEN DATA_TYPE in ('image') THEN 5ELSE 6
END
FROM INFORMATION_SCHEMA.COLUMNS c WITH (NOLOCK)
INNER JOIN syscolumns sc WITH (NOLOCK)
ON c.COLUMN_NAME = sc.name
INNER JOIN sysobjects so WITH (NOLOCK)ON sc.id = so.id
AND so.name = c.TABLE_NAMEWHERE table_name = @strTableName
AND DATA_TYPE <> 'timestamp'AND sc.IsComputed = 0
ORDER BY ORDINAL_POSITIONFOR READ ONLYOPEN CR_Table
FETCH NEXT FROM CR_Table INTO @ColName, @IsChar
WHILE (@@fetch_status <> -1)
BEGIN
IF @@fetch_status <> -1
BEGINIF @SelList = 'SELECT'
BEGIN
SELECT @Fields = @Fields + '[' + @ColName + ']' + ', 'SELECT @SelList = CASE @IsChar
WHEN 1 THEN @SelList + ' ISNULL('''''''' + REPLACE(['+ @ColName + '],'''''''', '''''''''''' ) + '''''''',''NULL'') ' + ' COLLATE database_default + '
WHEN 2 THEN @SelList + 'ISNULL('''''''' + CONVERT(VARCHAR(20),['+ @ColName + '])+ '''''''',''NULL'') ' + ' COLLATE database_default + '
WHEN 3 THEN @SelList + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(MAX),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + '
--WHEN 3 THEN @SelList + ''' CONVERT(VARCHAR(MAX),['+ @ColName + ']) '''
WHEN 4 THEN @SelList + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(8000),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + '
WHEN 5 THEN @SelList + '''MyImageData'''''
ELSE @SelList + ' ISNULL(CONVERT(VARCHAR(2000),['+ @ColName + '],0),''NULL'')' + ' COLLATE database_default + ' END
END
ELSE
BEGIN
SELECT @Fields = @Fields + '[' + @ColName + ']' + ', 'SELECT @SelList = CASE @IsChar
WHEN 1 THEN @SelList + ''',''' + ' + ' + ' ISNULL('''''''' + REPLACE(['+ @ColName + '],'''''''', '''''''''''' ) + '''''''',''NULL'') ' + ' COLLATE database_default + '
WHEN 2 THEN @SelList + ''',''' + ' + ' + 'ISNULL('''''''' + CONVERT(VARCHAR(20),['+ @ColName + '])+ '''''''',''NULL'') ' + ' COLLATE database_default + '
WHEN 3 THEN @SelList + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(MAX),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + '
--WHEN 3 THEN @SelList + ''' CONVERT(VARCHAR(MAX),['+ @ColName + ']) '''
WHEN 4 THEN @SelList + ''',''' + ' + ' + ' ISNULL('''''''' + REPLACE(CONVERT(VARCHAR(8000),['+ @ColName + ']),'''''''', '''''''''''')+ '''''''' ,''NULL'') '+ ' COLLATE database_default + '
WHEN 5 THEN @SelList + ''',''' + '''MyImageData'''''
ELSE @SelList + ''',''' + ' + ' + ' ISNULL(CONVERT(VARCHAR(2000),['+@ColName + '],0),''NULL'')' + ' COLLATE database_default + ' END
ENDIF @IsChar = 5
SET @strImageSQL = 'SELECT ' + @ColName + ' FROM ' + @strTableName
END
FETCH NEXT FROM CR_Table INTO @ColName, @IsChar
END
CLOSE CR_TableDEALLOCATE CR_Table
SELECT @Fields = SUBSTRING(@Fields, 1,(len(@Fields)-1))
SELECT @SelList = SUBSTRING(@SelList, 1,(len(@SelList)-1))
SELECT @SelList = @SelList + ' FROM ' + @strTableNameSELECT @InsertStmt = @InsertStmt + @Fields + ')'
SET NOCOUNT ON
--now we need to create and load the temp table that will hold the data
--that we are going to generate into an insert statement
CREATE TABLE #TheData (TableData varchar(MAX))
INSERT INTO #TheData (TableData) EXEC (@SelList)
IF @strImageSQL <> ''
BEGIN
CREATE TABLE #ImageData (TableData image)
INSERT INTO #ImageData (TableData) EXEC (@strImageSQL)
END
--Cursor through the data to generate the INSERT statement / VALUESDECLARE CR_Data CURSOR FAST_FORWARD FOR SELECT TableData FROM #TheData FOR
READ ONLY
OPEN CR_Data
FETCH NEXT FROM CR_Data INTO @tableDataIF @strImageSQL <> ''
BEGIN
DECLARE CR_ImageData CURSOR FAST_FORWARD FOR SELECT TableData FROM #ImageData FORREAD ONLY
OPEN CR_ImageDataFETCH NEXT FROM CR_ImageData INTO @ImageData
END
WHILE (@@fetch_status <> -1)
BEGIN
IF (@@fetch_status <> -2)BEGIN
IF @strImageSQL <> ''
BEGINPRINT @InsertStmt
PRINT 'VALUES '
PRINT '('
PRINT SUBSTRING(@tableData,1,CHARINDEX('MyImageData',@tableData)-2)PRINT @ImageData
PRINT SUBSTRING(@tableData,CHARINDEX('MyImageData',@tableData) + 12,LEN(@tableData))
PRINT ')' + CHAR(13)
END
ELSE
PRINT @InsertStmt + ' VALUES (' + @tableData + ')' + CHAR(13)
IF @RequiredGo = 1
PRINT 'GO'
ENDFETCH NEXT FROM CR_Data INTO @tableData
IF @ImageData <> '' FETCH NEXT FROM CR_ImageData INTO @ImageData
-- IF @TextData <> ''
-- FETCH NEXT FROM CR_TextData INTO @TextData
END
CLOSE CR_Data
DEALLOCATE CR_DataIF @ImageData <> ''
BEGINCLOSE CR_ImageData
DEALLOCATE CR_ImageDataEND
IF @bitIdentity = 1
BEGIN
PRINT 'SET IDENTITY_INSERT [' + @strTableName + '] OFF '
END
PRINT '---- ** End of Inserts ** ----'
RETURN (0)
=========== End of Procedure =======================
Any help will be appreciated.
View 1 Replies
View Related
Jan 23, 2006
I am trying to store a byte array in a database. I want to use binary to store the data but I am confused about the type. The byte array I am trying to store is a password hash from SHA512.
I hash a plain text value then store the result in a byte array. I then want to store the byte array in the database as binary but I am confused when its asking for the size of the binary field. In nvarchar a size of 2 would mean 2 characters.
How should I choose the size of this binary field, and what does the size mean. If I choose a size of 6 does that mean 6 characters, like 010110. Or is it stored differently?
The maximum size of a plain text password is 30 characters, and the salt used to generate the SHA512 hash has a maximum size of 16, but I don't know the exact size of the salt because its randomly picked when the salt is generated.
I need to make sure the size of my binary field will hold the largest possible password hash, but I don't want it too large so its never completely used.
How is this data stored in the binary field, and what size binary field should I choose to make sure there are no problems with the password hash being truncated, yet making sure I'm not just wasting by creating a field thats too large.
Thanks!
View 3 Replies
View Related
Mar 19, 2004
Hello,
I need to generate HASH of text values for my app. I can generate hash values for normal fields using CHEKCSUM and BINARY_CHECKSUM function but it does not support checksum of text, ntext, image, and cursor, as well as sql_variant.
How can I generate checksums of such datatype.
Karam
View 7 Replies
View Related
Jan 4, 2008
Hi my first post so be gentle :D
I have a table which has a column of type binary(200)
I want to put some test data into this table just using sql server managment studio express
how do i do this i keep getting message which says
"the changed value in this cell was not recognized as valid .NET framework data type: Byte[]"
Thanks,
Adam
View 1 Replies
View Related
Aug 9, 2006
Hi Folks,
After I inserted a row in my Database (row 27) I started getting this error when I try to insert, update or delete the record in the database.
I've searched about the error on google and it says that I should have a field that crossed the limit of characters.
I have only the autoincrement field, two varchar fields and a text field, neither one of the varchar fields crossed the limit, they arent even close. I found in google that one solution would be turn the field that is having problems in a text field, but the only field that actually can be causing the problem already is of the text type.
The exact error I get on VS 2005 when trying to change something in the row 27 is:
"No row was updated.
The data in row 27 was not committed.Error Source: .Net SqlClient Data Provider.Error Message: String or binary data would be truncated.The statement has been terminated.
Corret the errors and retry or press ESC to cancel the change(s)."
I need some help guyz, see ya, hugs.
View 3 Replies
View Related
Jan 21, 2007
Hi Guys, I'm trying to save the data into 2 table when i click the button. But it pops out this error: String or binary data would be truncated. The statement has been
terminated. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: String or binary data would be
truncated. The statement has been terminated.Source Error:
Line 116:Line 117: Sqlinsert.Connection.Open()Line 118: Sqlinsert.ExecuteNonQuery()Line 119:Line 120: Sqlinsert.Connection.Close() I Don't know what it means so i paste my codes regarding the button & the redline Private Sub btnAdd_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnAdd.Click
'add the data into shopper
Dim strsqlcmd As String
Dim strName, straddress As String
Dim strContact, strEmail, strPw As String
Dim strIC As String
strName = txtName.Text
straddress = txtAdd.Text
strEmail = txtEmail.Text
strContact = txtboxContact.Text
strIC = txtIC.Text
strsqlcmd = "Insert Into Shopper (Name, Address, Contact, Email, IC) Values (@Name, @Address, @Contact, @Email, @IC)"
SqlCommand1.CommandText = strsqlcmd
With SqlCommand1.Parameters
.Add("@Name", strName)
.Add("@Address", straddress)
.Add("@Contact", strContact)
.Add("@Email", strEmail)
.Add("@IC", strIC)
End With
SqlCnt.Open()
SqlCommand1.ExecuteNonQuery()
SqlCnt.Close()
'add the data into the presc
strsqlcmd = "Insert Into Prescription (Name, Address, Contact, Email, IC) Values (@Name, @Address, @Contact, @Email, @IC)"
Sqlinsert.CommandText = strsqlcmd
With Sqlinsert.Parameters
.Add("@Name", strName)
.Add("@Address", straddress)
.Add("@Contact", strContact)
.Add("@Email", strEmail)
.Add("@IC", strIC)
End With
Sqlinsert.Connection.Open()
Sqlinsert.ExecuteNonQuery()
Sqlinsert.Connection.Close()
' go the add item
Response.Redirect("NewPrescItem.aspx") why my sqlinsert.excutenonquery will have this error? and what is this error really means? Thanks in advance
View 3 Replies
View Related
Feb 24, 2007
Hi,
I am facing problem inserting binary data into sql data type varbinary.
I want to save an object data type in var binary data type into sql.It gives a followin error.
The name 'DocumentData' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted.
I do not use ASP Upload file.
Any type of help .
Thanks in advance
Friend
View 4 Replies
View Related
Sep 12, 2007
I am currently developing a simple program that will upload ms-word documents to a database so users can view them within the department.
The program worked prefectly while using sql 2005 with the these fields:
FormId intFileName nvarchar(50)FileBytes varbinary(Max)
This was done in unit testing, now in system testing there is a difference.
A slight downgrade in the database and server software!
We are using sql 2000 on a 2000 server and the FileBytes datatype had to change to the following:
FormId intFileName nvarchar 50 FileBytes varbinary 8000
There is no 'Max' option in sql 2000 for the datatype varbinary.
So when the insert is perform, we get this error message:
String or binary data would be truncated.The statement has been terminated.
I am guessing it has something to do with FileBytes, because this is the only thing that changed.
I just don't know how to solve the problem.P.S.The application is in ASP.NET 2.0
Thanks,
xyz789
View 4 Replies
View Related
Oct 8, 2007
I keep getting the error "String or binary data would be truncated." when I try to insert data into SQL Sever 2005 from an ASP.net page. Having searched thoughout the web, I know this is generally caused because one of the values being inserted is bigger than the size of the field it's going into. But, I have tested this out in many different ways, and this is not what's causing the problem.
I have tried doing the insert as a SQL statement and using the "ExecuteNonQuery" command. I have also tried running this through a stored procedure. Neither works. In both situations, I have captured the TSQL statements via SQL Profiler and run them in a query window. In both cases, the statements work just fine in a query window.
When I try to do the insert via a stored procedure, all of the statements in the stored procedure show up in SQL Profiler, including the final SELECT statement I have the indicates a successful result. But, the data does not end up in the table and the ASP.net page returns an error.
Also, I have run both the Stored Proceure and the SQL insert statement making all of the fields blank as a way of ensuring that no value can be longer than a field's size. But, in both cases I still get the same error.
Here's the line I use when doing a regular insert:
Dim Command4 = New Data.SqlClient.SqlCommand("INSERT INTO ResourceCenter(UserEmail, UserPassword, Region, FirstName, LastName, Company, JobTitle, Address1, Address2, City, StateProvince, ZipPostalCode, Country, BusinessPhone, WebSiteURL, HowDidYouFind, Industry, WhatTypeOfSolution, CompanySize, NumLogins, LastLogin) VALUES ('" & UserEmail & "', '" & UserPassword & "', '" & Region & "', '" & FirstName & "', '" & LastName & "', '" & Company & "', '" & JobTitle & "', '" & Address1 & "', '" & Address2 & "', '" & City & "', '" & StateProvince & "', '" & ZipPostalCode & "', '" & Country & "', '" & BusinessPhone & "', '" & WebSiteURL & "', '" & HowDidYouFind & "', '" & Industry & "', '', '', 1, " & Now & ")", conn2)
Dim NumRowsUpdated2 = Command4.ExecuteNonQuery()
Here's my code when I call a stored procedure:
Dim dsSignup As New Data.DataSet()Dim Command4 As New Data.SqlClient.SqlDataAdapter("ap_ResourceCenterModify", conn2)Command4.SelectCommand.CommandType = Data.CommandType.StoredProcedureCommand4.SelectCommand.Parameters.Add("@UserID", Data.SqlDbType.Int, 0).Value = 0Command4.SelectCommand.Parameters.Add("@UserEmail", Data.SqlDbType.VarChar, 100).Value = UserEmailCommand4.SelectCommand.Parameters.Add("@UserPassword", Data.SqlDbType.VarChar, 20).Value = UserPasswordCommand4.SelectCommand.Parameters.Add("@Region", Data.SqlDbType.VarChar, 50).Value = RegionCommand4.SelectCommand.Parameters.Add("@FirstName", Data.SqlDbType.VarChar, 100).Value = FirstNameCommand4.SelectCommand.Parameters.Add("@LastName", Data.SqlDbType.VarChar, 100).Value = LastNameCommand4.SelectCommand.Parameters.Add("@Company", Data.SqlDbType.VarChar, 100).Value = CompanyCommand4.SelectCommand.Parameters.Add("@JobTitle", Data.SqlDbType.VarChar, 100).Value = JobTitleCommand4.SelectCommand.Parameters.Add("@Address1", Data.SqlDbType.VarChar, 100).Value = Address1Command4.SelectCommand.Parameters.Add("@Address2", Data.SqlDbType.VarChar, 100).Value = Address2Command4.SelectCommand.Parameters.Add("@City", Data.SqlDbType.VarChar, 100).Value = CityCommand4.SelectCommand.Parameters.Add("@StateProvince", Data.SqlDbType.VarChar, 50).Value = StateProvinceCommand4.SelectCommand.Parameters.Add("@ZipPostalCode", Data.SqlDbType.VarChar, 50).Value = ZipPostalCodeCommand4.SelectCommand.Parameters.Add("@Country", Data.SqlDbType.VarChar, 200).Value = CountryCommand4.SelectCommand.Parameters.Add("@BusinessPhone", Data.SqlDbType.VarChar, 100).Value = BusinessPhoneCommand4.SelectCommand.Parameters.Add("@WebSiteURL", Data.SqlDbType.VarChar, 200).Value = WebSiteURLCommand4.SelectCommand.Parameters.Add("@HowDidYouFind", Data.SqlDbType.VarChar, 100).Value = HowDidYouFindCommand4.SelectCommand.Parameters.Add("@Industry", Data.SqlDbType.VarChar, 100).Value = IndustryCommand4.SelectCommand.Parameters.Add("@WhatTypeOfSolution", Data.SqlDbType.VarChar, 250).Value = WhatTypeOfSolutionCommand4.SelectCommand.Parameters.Add("@CompanySize", Data.SqlDbType.VarChar, 100).Value = CompanySizeCommand4.Fill(dsSignup)Any ideas of what else I can try? Thanks in advance.
View 4 Replies
View Related
Oct 18, 2007
hi
i used to export my tables to excel file
but now i have tables which have binary (image) data
what happens to them?
is there any way to backup these data?
View 1 Replies
View Related
